With the second (and last) part of my previous Summer of Code work, we get:
-ipfw's in kernel nat
-redirect_* and LSNAT support
General information about nat syntax and some examples are available
in the ipfw (8) man page. The redirect and LSNAT syntax are identical
to natd, so please refer to natd (8) man page.
To enable in kernel nat in rc.conf, two options were added:
o firewall_nat_enable: equivalent to natd_enable
o firewall_nat_interface: equivalent to natd_interface
Remember to set net.inet.ip.fw.one_pass to 0, if you want the packet
to continue being checked by the firewall ruleset after being
(de)aliased.
NOTA BENE: due to some problems with libalias architecture, in kernel
nat won't work with TSO enabled nic, thus you have to disable TSO via
ifconfig (ifconfig foo0 -tso).
Approved by: glebius (mentor)
- Somewhat improve wording.
- Change the layout of the EXAMPLES section so that descriptions
come before example, as in most other manpages.
- Fix a bad example that edits a label using a `c' partition.
o add hack/nonstandard channel mapping for public safety band channels to
mirror kernel (temporary until we have proper 802.11 state)
o change ieee80211_mhz2ieee to take channel flags (unused right now)
While here do some minor fixups like using IEEE80211_IS_CHAN_ANYG.
: fdisk.c revision 1.74
: date: 2004/06/14 07:21:19; author: phk; state: Exp; lines: +3 -3
: Make fdisk initialize the first instead of the last slice by default.
For filesystems which use vfs_mount_error() to log an error, this
char buffer will be populated with a string error message.
If nmount() fails, in addition to printing out strerror(errno),
print out the "errmsg" populated by vfs_mount_error().
makes restore less efficient, but it makes a bigger effore to read
corrupted dumps. Specifiacally, when in degreded mode:
1) Restore shifts the input by 1 byte if it sees a problem,
rather than one tape block.
2) It doesn't assume the inodes are stored in ascending order.
3) It turns some panics into warning printfs.
We also verify some fields more carefully than before.
There's probably more a degreded mode could do, but this seems to
help a lot.
Approved by: imp, iedowse, mckusick
MFC after: 3 weeks
and Daichi GOTO <daichi@FreeBSD.org> for submitting this
major rewrite of unionfs. This rewrite was done to
try to solve many of the longstanding crashing and locking
issues in the existing unionfs implementation. This
implementation also adds a 'MASQUERADE mode', which allows
the user to set different user, group, and file permission
modes in the upper layer.
Submitted by: daichi, Masanori OZAWA
Reviewed by: rodrigc (modified for minor style issues)
This will allow the NFS mount code to return a string error message
in addition to returning an error integer value.
Reviewed by: mohans
MFC after: 1 month
them unsigned I made the possible overflows hard to detect,
and it only saved 1 bit which isn't principal, even less now
that the underlying issue with the total of virtual memory has
been fixed. (For the record, it will overflow with >=2T of
VM total, with 32-bit ints used to keep counters in pages.)
- While here, fix printing of other "struct vmtotal" members
such as t_rq, t_dw, t_pw, and t_sw as they are also signed.
Reviewed by: bde
MFC after: 3 days
- use flags rather than sperate ioctls for edge, p2p
- implement p2p and autop2p flags
- define large pathcost constant as ULL
- show bridgeid and rootid in ifconfig
Obtained from: Reyk Floeter <reyk@openbsd.org>
- Fix overflow bugs in sysctl(8), systat(1), and vmstat(8)
when printing values of "struct vmmeter" in kilobytes as
they don't necessarily fit into 32 bits. (Fix sysctl(8)
reporting of a total virtual memory; it's in pages too.)
address learned by the bridge is made permanent, the address will not age out
and most importantly will not migrate to another interface.
This can be used to stop mac address poisoning or clients roaming in much the
same way as static entries without the hassle of preloading the table.
compatible, it would have to (at least):
- support the "compat-compat" -T option,
- *not* support the -l, -O, and -v options,
- default to soft updates being disabled.
Worse, the compatibility mode makes it impossible to mount_mfs(8)
a file system from fstab(5) with soft updates disabled (-S). [1]
Now, the only difference when called as "mount_mfs" or "mfs" (as
opposed to "mdmfs") is that the file mode of the mount point is
set by default to 01777. All options available to mdmfs(8) are
also available to mount_mfs(8); the -C option is still recognized
but ignored for backward compatibility.
PR: bin/98860 [1]
MFC after: 2 weeks
gmirror and graid3 in a way that it is not resynchronized after a
power failure or system crash.
It is safe when gjournal is running on top of gmirror/graid3.
RSTP provides faster spanning tree convergence, the protocol will exchange
information with neighboring switches to quickly transition to forwarding
without creating loops. The code will default to RSTP mode but will downgrade
any port connected to a legacy STP network so is fully backward compatible.
Reviewed by: syrinx
Tested by: syrinx
and -p flag was given perform fast file system checking (bascially only
garbage collecting of orphaned objects).
Rename bread() to blread() and bwrite() to blwrite() as we now link to
the libufs library, which also implement functions with that names.
Sponsored by: home.pl
in /etc/fstab.
This has been happening due to the priority inversion; options
specified on the command line should take precedence over options
from fstab over default "noro" option, but since both the default
"noro" and options specified on the command line (-w, -r, -o ...)
were put into the same "options" variable, "noro" took precedence
over fstab "ro" (this is easily visible with "mount -d").
PR: bin/100164
replace them with references to newfs(8) which documents them.
- Remove mentions of LFS support for which was retired in 1998.
- Regenerate an example output.
PR: docs/84913
MFC after: 3 days
gramatical tweaks along w/ sorting the list, and adding that serial is
available for USB....
PR: 85097
Submitted by: Fredrik Lindberg
MFC after: 1 week
read requests to its consumer. It has been developed to address
the problem of a horrible read performance of a 64k blocksize FS
residing on a RAID3 array with 8 data components, where a single
disk component would only get 8k read requests, thus effectively
killing disk performance under high load. Documentation will be
provided later. I'd like to thank Vsevolod Lobko for his bright
ideas, and Pawel Jakub Dawidek for helping me fix the nasty bug.
address, to avoid confusing the users that a full address is
always required.
Submitted by: Josh Paetzel <josh@tcbug.org> (through freebsd-doc)
MFC after: 3 days
partition size. On 32-bit platforms sizeof(long) < sizeof(off_t)
and using strtol(3) would prevent partitions larger than 4G
sectors or beyond 4G blocks.
PR: bin/103991
MFC after: 3 days
- Print proper error message when argument is specified twice.
Before the change it was detected properly, because of how
G_OPT_DONE() macro worked.
- Use err(3) functions where appropriate.
- Add some assertions.
- Bump version number, because G_TYPE_BOOL addition breaks API and ABI.
Changes: 98721,98722,98723,101360,106985
With the first part of my previous Summer of Code work, we get:
-made libalias modular:
-support for 'particular' protocols (like ftp/irc/etcetc) is no more
hardcoded inside libalias, but it's available through external
modules loadable at runtime
-modules are available both in kernel (/boot/kernel/alias_*.ko) and
user land (/lib/libalias_*)
-protocols/applications modularized are: cuseeme, ftp, irc, nbt, pptp,
skinny and smedia
-added logging support for kernel side
-cleanup
After a buildworld, do a 'mergemaster -i' to install the file libalias.conf
in /etc or manually copy it.
During startup (and after every HUP signal) user land applications running
the new libalias will try to read a file in /etc called libalias.conf:
that file contains the list of modules to load.
User land applications affected by this commit are ppp and natd:
if libalias.conf is present in /etc you won't notice any difference.
The only kernel land bit affected by this commit is ng_nat:
if you are using ng_nat, and it doesn't correctly handle
ftp/irc/etcetc sessions anymore, remember to kldload
the correspondent module (i.e. kldload alias_ftp).
General information and details about the inner working are available
in the libalias man page under the section 'MODULAR ARCHITECTURE
(AND ipfw(4) SUPPORT)'.
NOTA BENE: this commit affects _ONLY_ libalias, ipfw in-kernel nat
support will be part of the next libalias-related commit.
Approved by: glebius
Reviewed by: glebius, ru
length != BPF_WORDALIGN(length)
This meeans that it is possible for this to be true:
interface->rbuf_offset > interface->rbuf_len
Handle this case in the test for running out of packets. While
OpenBSD's solution of setting interface->rbuf_len to
BPF_WORDALIGN(length) is safe due to the size of the buffer, I think
this solution results in less hidden assumptions.
This should fix the problem of dhclient running away and consuming 100%
CPU.
PR: bin/102226
Submitted by: Joost Bekkers <joost at jodocus.org>
MFC after: 3 days
- after killing all attached providers, all providers are then detached
and operation is repeated for those who were attached,
- we don't want to remove keys for read-only attached providers, we only
want to detach them.
MFC after: 1 week
otherwise this command
ipfw add allow ipv6-icmp from any to 2002::1 icmp6types 1,2,128,129
turns into icmp6types 1,2,32,33,34,...94,95,128,129
PR: 102422 (part 1)
Submitted by: Andrey V. Elsukov <bu7cher at yandex.ru>
MFC after: 5 days
'ifconfig em0 tso' and 'ifconfig em0 -tso'. TSO for IPv4 and IPv6 is always
enabled or disabled together. The driver may enable only one if it doesn't
support both.
Document 'tso' and '-tso' in the ifconfig(8) man pages.
Sponsored by: TCP/IP Optimization Fundraise 2005
the BUGS section of the alloca(3) manpage. In particular, when
the number of TCP sockets is several tens of thousand, trying to
"sysctl -a" would SIGSEGV on the net.inet.tcp.pcblist entry (it
would exceed the stacksize ulimit, in an undetectable manner).
Reported by: Igor Sysoev
o Restore owner/group/mode/atime/mtime of symbolic links, rev. 1.30.
o Extract file flags of symbolic link, rev. 1.42.
o Call getfile() before altering file attributes.
Open file with mode 0600 instead of 0666 so that file won't remain
group or world readable/writable even if getfile() terminated.
Move skipfile() before altering file attributes in IF{CHR,BLK} and
IFIFO case for symmetry, rev. 1.32.
o Use file mode 0600 when creating special file or fifo, revs. 1.33, 1.34.
o Remove redundant -N check.
PR: bin/101660
Submitted by: Andrey V. Elsukov
Obtained from: NetBSD, enami@netbsd
MFC after: 6 weeks
REPORT LUNS command to a device.
camcontrol.[c8]: Implement reportluns. This tries to print the LUNs
out in a reasonable format. Only the periph
addressing method has been tested, since very little
hardware that I know of supports the other methods.
scsi_all.[ch]: Revamp the report luns CDB structure and helper
functions. This constitutes a little bit of an API
change, but since the old CDB length was 10 bytes,
and the REPORT LUNS CDB length is actually 12 bytes,
it's clear that no one was using this API in the
first place.
MFC After: 1 week
having trouble with the "me6" keyword. Also, we were using inet_pton on
the wrong variable in one place.
Reviewed by: mlaier (previous version of patch)
Obtained from: Sascha Blank (inet_pton change)
MFC after: 1 week
for example:
fwd tablearg ip from any to table(1)
where table 1 has entries of the form:
1.1.1.0/24 10.2.3.4
208.23.2.0/24 router2
This allows trivial implementation of a secondary routing table implemented
in the firewall layer.
I expect more work (under discussion with Glebius) to follow this to clean
up some of the messy parts of ipfw related to tables.
Reviewed by: Glebius
MFC after: 1 month
despite the interface link status.
Add dhclient_flags_iface and background_dhclient_iface rc.conf options.
(where iface is a specific interface). These can be used to give
interface specific flags to dhclient.
Reviewed by: brooks@
buildworld breakage.
Exclude loglevel.c from the build. It does not appear to be used by
anything in the tree and buildworld succeeds just fine without it.
unlinked as soon as the dump starts (and removed when the dump is
completed, and the dump process exits). Previous wording was confusing
because users might expect the snapshot to be visible in the .snap
subdirectory while dump is running.
MFC after: 1 week
output to setproctitle(3) in order to get rid of the ugly two-character
escape sequence "\n" in the ps(1) output of a dump(8) process:
<< [...] finished in 0:00 at Sat Aug 5 14:44:39 2006\n (dump)
>> [...] finished in 0:00 at Sat Aug 5 14:44:39 2006 (dump)
init(8), to avoid losing a race to them and dying before being able
to call reboot(2).
PR: bin/64664
Submitted by: maxim
Obtained from: NetBSD
MFC after: 30 days
code independent of the macro. This utility is just omitted
from the build as a whole by ../Makefile if MK_INET6 is set to false.
Pointed out by: ume
Tested with: cmp(1)
not be mounted unless the -l flag was specified.
Add an rc script, mountlate, which basically runs 'mount -a -l'. It runs
after DAEMON but before LOGIN.
This is useful for things like loopback mounts, because mountcritremote
runs before mountd / nfsd (since /usr might be a remote file system), so
an attempt to mount a loopback network file system in mountcritremote will
fail.
Also add a progress message to mountcritlocal, for the sake of symmetry
with similar messages in mountcritremote and mountlate.
Reviewed by: freebsd-rc
MFC after: 3 weeks
mechanism
o change vlan cloning to use callback and pass all vlan parameters
on create using the new SIOCREATE2 ioctl
o update vlan set logic to match existing practice
with NACK if I don't set it. Setting 'option dhcp-client-identifier' is
alternative but it is inconvenient because I have to keep the list of
all MAC addresses. As bin/94743 pointed out, it is always sent from
Windows clients and I found Mac OS X does the same.
OK'd by: brooks
order to - for example - apply firewall rules to a whole group of
interfaces. This is required for importing pf from OpenBSD 3.9
Obtained from: OpenBSD (with changes)
Discussed on: -net (back in April)
sector size, instead of later failing with an error about /boot/mbr
not being a multiple of the sector size (since we end up with an
assumed sector size of MAX_SEC_SIZE * 2).
- We query the sector size via an IOCTL anyway, so if that succeeds
use that instead of probing for it via read(2) calls. This fixes
the problem with fdisk failing to operate on at least graid3 and
md(4) devices on kernels with src/sys/geom/geom_dev.c before
rev. 1.90, due to fdisk failing to detect the sector size.
- When detecting the root device allow "/" characters in it, which
happens with e.g. gmirror devices.
Reviewed by: cperciva
MFC after: 1 week
- 'tag' & 'untag' action parameters.
- 'tagged' & 'limit' rule options.
Rule examples:
pipe 1 tag tablearg ip from table(1) to any
allow ip from any to table(2) tagged tablearg
allow tcp from table(3) to any 25 setup limit src-addr tablearg
sbin/ipfw/ipfw2.c:
1) new macros
GET_UINT_ARG - support of 'tablearg' keyword, argument range checking.
PRINT_UINT_ARG - support of 'tablearg' keyword.
2) strtoport(): do not silently truncate/accept invalid port list expressions
like: '1,2-abc' or '1,2-3-4' or '1,2-3x4'. style(9) cleanup.
Approved by: glebius (mentor)
MFC after: 1 month
keeping a flag to check whether we actually wanted to mount the filesystem
readonly, setup the options list so that we start off by assuming rw is what's
desired and let later flags change that.
to the init. This prevents zombies from being accumulated.
PR: bin/64198
Tested by: Eugene Grosbein <eugen at www svzserv kemerovo su>
Approved by: kan (mentor)
MFC after: 1 month
Now, encryption algorithm is given using '-e' option, not '-a'.
The '-a' option is now used to specify authentication algorithm.
Supported by: Wheel Sp. z o.o. (http://www.wheel.pl)
- remove call to getmntopts(), and just pass -o options to
nmount(). This removes some confusion as to what options
msdosfs can parse, by pushing the responsibility of option parsing
to the VFS and FS specific code in the kernel.
msdosfs_vfsops.c:
- add "force" and "sync" to msdosfs_opts. They used to be specified
in mount_msdosfs.c, so move them here. It's not clear whethere these
options should be placed into global_opts in vfs_mount.c or not.
Motivated by: marcus
Since tags are kept while packet resides in kernelspace, it's possible to
use other kernel facilities (like netgraph nodes) for altering those tags.
Submitted by: Andrey Elsukov <bu7cher at yandex dot ru>
Submitted by: Vadim Goncharov <vadimnuclight at tpu dot ru>
Approved by: glebius (mentor)
Idea from: OpenBSD PF
MFC after: 1 month
It is no longer needed, because "mount -t reiserfs" calls nmount(2)
directly to mount a ReiserFS file system without the use of
this external mount program.
Approved by: dumbbell
option if none is given in the config file. Also add #ifdefd out
support for sending a client ID based on our MAC address.
PR: bin/94743, bin/76401
Submitted by: Frank Behrens <frank at pinky dot sax dot de>
X-MFC after: 6.1-RELEASE
o Introduce -r and -w keys which allow to load and save a worklist.
o Replace README by man page.
PR: bin/96677
Submitted by: Ulrich Spoerlein
Approved by: phk
MFC after: 1 month
arguments so we do not coredump at "help foo", "back bar" and such.
o Be consistent and print argc - 1 as a command arguments number in
all cases.
PR: bin/37096
Submitted by: Joshua Goodall
MFC after: 1 month
Reset it to 1 for each devd config file so if the parser finds
a syntax error devd(8) will report a correct line number.
Submitted by: Niki Denev
MFC after: 2 weeks
to match the number of inodes on the disk. If we find a directory
entry with a crazy inode number in it, don't look beyond the end
of the bitmap to find that inode's state. Instead skip that directory
entry and print a warning.
Reviewed by: iedowse
MFC after: 3 weeks
wait time for a packet. This allows to:
- Count number of packets received before and after specified
time.
- Shorten time of execution of 'ping -c 1' scripts.
Submitted by: Lytochkin Boris <lytboris gmail.com>
device number at creation time with -u option. Together with XMLizing
mdconfig(8), I broke this functionality.
This change is temporary. Complete fix will be commited soon.
Approved by: cognet (mentor)
a problem with listing large number of md(4) devices. Either 'list' or
'query' mode uses XML.
Additionally, new functionality was introduced. It's possible to pass
multiple devices to -u:
# ./mdconfig -l -u md0,md1
Approved by: cognet (mentor)
- <netipx> headers [1]
- IPX library (libipx)
- IPX support in ifconfig(8)
- IPXrouted(8)
- new MK_NCP option
New MK_NCP build option controls:
- <netncp> and <fs/nwfs> headers
- NCP library (libncp)
- ncplist(1) and ncplogin(1)
- mount_nwfs(8)
- ncp and nwfs kernel modules
User knobs: WITHOUT_IPX, WITHOUT_IPX_SUPPORT, WITHOUT_NCP.
[1] <netsmb/netbios.h> unconditionally uses <netipx> headers
so they are still installed. This needs to be dealt with.
as both have been read from the command line. Still use the callback,
but this time only to verify that both vlan and vlandev have been
found on the command line.
This should allow for control over the relative order of processing
parameters, which is needed to satisfy some caveats of the if_vlan
driver. E.g., MTU cannot be changed on a vlan interface until it's
attached to its parent.
PR: bin/94028
Reviewed by: ru
MFC after: 3 days
As discussed on -current, there is no sensitive info in /sbin/init
to prevent reading it from non-privileged users, nor any reason to
remove the 'x' bit as the first thing the program does is check the
uid and exit if it is not run by root.
Instead (and this is why i make the change), mode 500 prevents
operation when exporting the partition without -maproot=0 to diskless
clients.
All previuos releases are affected by the same problem, so a merge
to RELENG_6 at least would be appropriate (after proper re@ approval
of course).
