When removing a boot environment iterate over the dependents and process the
snapshots by grabbing any clones. Promote the clones we found and then
remove the target environment.
This fixes the ability to destroy a boot environment when it has been used
to spawn one or more other boot environments.
PR: 242592
Submitted by: Wes Maag <jwmaag gmail com> (with changes by myself)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22953
Update a bunch of Makefile.depend files as
a result of adding Makefile.depend.options files
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22494
-o will force the origin to be destroyed unconditionally.
BE_DESTROY_AUTOORIGIN, on the other hand, will only destroy the origin if it
matches the format used by be_snapshot. This lets us clean up the snapshots
that are clearly not user-managed (because we're creating them) while
leaving user-created snapshots in place and warning that they're still
around when the BE created goes away.
This command simply returns 0 at the moment and explicitly takes no
arguments. This should be used by utilities wanting to see if bectl can
operate on the system they're running, or with a specific root (`bectl -r`).
It may grow more checks than "will libbe successfully init" in the future,
but for now this is enough as that checks for the dataset mounted at "/" and
that it looks capable of being a BE root (e.g. it's not a top-level dataset)
bectl commands can now specify if they want to be silent, and this will turn
off libbe_print_on_error so they can control the output as needed. This is
already used in `bectl check`, and may be turned on in the future for some
other commands where libbe errors are better suppressed as the failure mode
may be obvious.
Requested by: David Fullard
MFC after: 3 days
This turns into a warning in GCC 4.2 that 'reverse' may be used
uninitialized in this function. While I don't immediately see where it's
deciding this from (there's only two paths that make column != NULL, and
they both set reverse), initializing reverse earlier is good for clarity.
MFC after: 3 days
Allow 'bectl list' to sort output by a given property name. The property
name is passed in using a command-line flag, '-c' for ascending order and
'-C' for descending order. The properties allowed to sort by are:
- name (the default output, even if '-c' or '-C' are not used)
- creation
- origin
- used
- usedds
- usedsnap
- usedrefreserv
The default output for 'bectl list' is now ascending alphabetical order of
BE name.
To sort by creation time from earliest to latest, the command would be
'bectl list -c creation'
Submitted by: Rob Fairbanks <rob.fx907 gmail com>
Reviewed by: ler
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20818
bectl advertises that it has the ability to create recursive and
non-recursive boot environments. This patch implements that functionality
using the be_create_depth API provided by libbe. With this patch, bectl now
works as bectl(8) describes in regards to creating recursive/non-recursive
boot environments.
Submitted by: Rob Fairbanks <rob.fx907 gmail com> (with minor changes)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20240
CID 1400451: case 0 is missing a break/return and falling through to the
default case. waitpid(0, ...) makes little sense in the child, we likely
wanted to terminate immediately.
CID 1400453: size argument uses sizeof(char **) instead of sizeof(char *)
and is assigned to a char **; sizeof's match but "this isn't a portable
assumption".
CID: 1400451, 1400453
MFC after: 3 days
Fixed by r348215, bectl ujail first attempts the trivial fetch of a jid by
passing the first argument to 'ujail' to jail_getid(3) in case a jid/name
have been passed in instead of a BE name. For numerically named BEs, this
was doing the wrong thing: instead of failing to locate the jid specified
and falling back to mountpath search, jail_getid(3) would return the input
as-is.
While here, I've fixed bectl_jail_cleanup which still used a hard-coded pool
name that was overlooked w.r.t. other work that was in-flight around the
same time.
MFC after: 3 days
In commit r345845, a portion of documentation for the create subcommand was
removed. Specifically, for creating a snapshot of an existing boot
environment. bectl even has a test-case for this functionality.
Removing the sub-command description was discussed in PR 235850.
This patch brings back the second "create" description that was originally
in place. Albeit, with a few wording/clarifying changes.
Submitted by: Rob Fairbanks <rob.fx907 gmail com>
Reviewed by: kevans
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D20249
'be_destroy' can destroy a boot environment (by name) or a given snapshot.
If the target to be destroyed is a dataset, check if it's mounted. We don't
want to check if the origin dataset is mounted when destroying a snapshot.
PR: 236043
Submitted by: Rob Fairbanks <rob.fx907 gmail com>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D19650
The jail(8) command provides a variety of jail pseudo-parameters that are
useful to consumers of bectl, mount.devfs being the most-often-requested
paramater by bectl users.
command, exec.start, nopersist, and persist may not be specified via -o to
bectl. The command/exec.start remains passed as it always has at the end of
bectl, and persistence is dictated by -b/-U bectl jail arguments.
Submitted by: Wes Maag <jwmaag gmail com>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D19282
Set up zpools with a more unique name, stash the zpool name away in a file pointed
to by `$ZPOOL_NAME_FILE` (which is relative to a per-testcase generated temporary
directory), then remove the file based on `$ZPOOL_NAME_FILE` in the cleanup
routines.
This is a more concurrency-safe solution and will allow the testcases to be safely
executed in parallel.
Reviewed by: kevans, jtl
Approved by: jtl (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D19024
We can't predict when destruction of origin is needed, and currently we have
a precedent for not prompting for things. Leave the decision up to the user
of bectl(8) if they want the origin snapshot to be destroyed or not.
Emits a warning when -o isn't used and an origin snapshot is left to be
cleaned up, for the time being. This is handy when one drops the -o flag but
really did want to clean up the origin.
A couple of -e ignore's have been sprinkled around the test suite for places
that we don't care that the origin's not been cleaned up. -o functionality
tests will be added in the future, but are omitted for now to reduce
conflicts with work in flight to fix bits of the tests.
Reported by: Shawn Webb
MFC after: 1 week
This is a wild guess as to why bectl tests failed once upon a time in CI,
given no apparent way to see a transcript of cleanup routines with Kyua. The
bectl tests construct a new, clean zpool for every test. The failure
indicated was because of a mount that was leftover from a previous test, but
the previous test had succeeded so it's not clear how the mount remained
leftover unless the `zpool get health ${pool}` had somehow failed.
MFC after: 1 week
This set of changes is geared towards making bectl respect deep boot
environments when they exist and are mounted. The deep BE composition
functionality (`bectl add`) remains disabled for the time being. This set of
changes has no effect for the average user. but allows deep BE users to
upgrade properly with their current setup.
libbe(3): Open the target boot environment and get a zfs handle, then pass
that with the target mountpoint to be_mount_iter; If the BE_MNT_DEEP flag is
set call zfs_iter_filesystems and mount the child datasets.
Similar logic is employed when unmounting the datasets, save for children
are unmounted first.
bectl(8): Change bectl_cmd_jail to pass the BE_MNT_DEEP flag when
calling be_mount as well as call be_unmount when cleaning up after the
jail has exited instead of umount(2) directly.
PR: 234795
Submitted by: Wes Maag <jwmaag_gmail.com> (test additions by kevans)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18796
By default, bectl is setting the jail 'name' parameter to the boot
environment name, which causes an error when the boot environment name is
not a valid jail name. With the attached fix, when no name is supplied, the
default jail name will be the jail id - this is is the same behavior as the
jail command.
Additionally, this commit addresses two other bugs that prevented unjailing
in scenarios where the jail name does not match the boot environment name:
1. In 'bectl_locate_jail', 'mountpoint' is used to resolve the boot
environment path, but really 'mounted' should be used. 'mountpoint' is the
path where the zfs dataset will be mounted. 'mounted' is the path where
the dataset is actually mounted.
2. in 'bectl_search_jail_paths', 'jail_getv' would fail after the first
call. Which is fine, if the boot environment you're unjailing is the next
one up. According to 'man jail_getv', it's expecting name and value
strings. 'jail_getv' is being passed an integer for the lastjid, so amend
that to use a string instead.
Test cases have been amended to reflect the bugs found.
PR: 233637
Submitted by: Rob <rob.fx907_gmail.com>
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D18607
Those two manual pages are already referencing each other in the HISTORY
sections, which people might skip. Mention those manual pages explicitly in
the SEE ALSO sections. Also, remove a reference to be(1) from libbe(3).
Reviewed by: bcr
Approved by: krion (mentor, implicit), mat (mentor, implicit)
Differential Revision: https://reviews.freebsd.org/D18136
Observed in a CI test image, bectl_create test will run and be marked as
skipped because the module is not loaded. The first zpool invocation will
automagically load the module, but bectl_create is still skipped. Subsequent
tests all pass as expected because the module is now loaded and everything
is OK.
MFC after: 3 days
These tests operate on a file-backed zpool that gets created in the kyua
temp dir. root and ZFS support are both required for these tests. Current
tests cover create, destroy, export/import, jail, list (kind of), mount,
rename, and jail.
List tests should later be extended to cover formatting and the different
list flags, but for now only covers basic "are create/destroy actually
reflected properly"
MFC after: 3 days
Add an undocumented -r option preceding the bectl subcommand to specify a BE
root to operate out of. This will remain undocumented for now, as some
caveats apply:
- BEs cannot be activated in the pool that doesn't contain the rootfs
- bectl create cannot work out of the box without the -e option right now,
since it defaults to the rootfs and cross-pool cloning doesn't work like
that (IIRC)
Plumb the BE root through to libbe(3) so that some things -can- be done to
it, e.g.
bectl -r tank/ROOT create -e default upgrade
bectl -r tank/ROOT mount upgrade /mnt
this aides in some upgrade setups where rootfs is not necessarily ZFS, and
also makes it easier/possible to regression-test bectl when combined with a
file-backed zpool.
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D18029
vermaden (maintainer of beadm) points out the following inconsistencies:
- "missing command" is not printed prior to usage if the error is simply a
missing command; this should be obvious from the context
- "bectl rename" isn't using the "don't unmount" flag (zfs rename -u), so
the active BE can't be renamed. It doesn't make sense in our context to
*not* use -u, so use it.
Documentation updates reflect the above and note an inconsistency with the
'destroy' command that is consistent with other parts of the base system.
A fix for libbe(3) not properly being installed to /lib is included.
SHLIBDIR should have been added when it was moved in r337995.
Approved by: re (kib)
- Some overly-long lines
- Consistently using .Brq ({})
- Consistently using .Cm
- Not using .Ao/.Ac around .Ar
PR: 230576
Submitted by: Yuri Pankov (with a fair amount of rebasing pre-commit)
Add a -U flag to get back the old behavior. The new behavior is a little
more friendly to the common use cases, jail the BE and execute a script.
Having the jail torn down automatically when the script is finished, or when
you exit the shell, is a little more friendly than having to remember to
`bectl ujail`.
Batch mode (-b) will continue to leave the jail up, as it's assumed the
caller has other intentions.
Submitted by: Shawn Webb (partially)
Instead of always running /bin/sh, allow the user to specify the command
to run. The jail is not removed when the command finishes. Meaning,
`bectl unjail` will still need to be run.
For example:
```
bectl jail newBE pkg upgrade
bectl ujail newBE
```
Submitted by: Shawn Webb
Obtained from: HardenedBSD (8b451014ab)
Adding batch mode to the jail `bectl(8)` subcommand enables jailing of
ZFS Boot Environments in a scriptable fashion.
Submitted by: Shawn Webb
Obtained from: HardenedBSD (9e72d1c59a and ef7b6d9e1c with minor edit)
Previous iteration of this assumed that these won't fail because we've
already setup the jail param to this point, but the allocations could still
fail in pretty bad conditions.
Admit that it's possible and return (ENOENT, EINVAL, ENOMEM, or 0) when
deleting arguments. EINVAL shouldn't happen since we're passing optarg;
which may satisfy *optarg == '\0' but never optarg == NULL.
CID: 1394885, 1394901
These were previously necessary because the libnvpair and libzfs_core
includes were not installed into the SYSROOT, being a part of the copies
target in include/Makefile rather than being installed with the library.
This was fixed in r337696 and the headers are now installed properly, so we
may let go of the cruft.
Deleting the temp snapshot isn't immediately possible because it's the
origin of the newly imported boot environment. However, this is trivially
solved by opening the new boot environment and promoting it. The roles are
now reversed and the temp snapshot/dataset may be completely destroyed.
Remove the BUGS from libbe(3) and bectl(8).
- Missing include path
- Fully specify libzfs's dependencies (except for deps pulled in by other
deps) in Makefile.inc1
- Drop WARNS back down to 2 for libbe(3). I do this with much hesitation,
but the libzfs headers are apparently a hot warning-filled mess as far as
GCC 4.2 is concerned.
The mostly-undocumented 'add' functionality, from initial read-through, is
intended for construction of deep ("bdrewery style") boot environments.
However, it's mostly broken at this point. `#if SOON` it out on both sides
so that we're not exposing a broken API/feature.
Work will resume on it in due time.
- File names don't necessarily need to be repeated
- Add SPDX tags
- Add a missing copyright for Kyle Kneitinger in bectl.8, originally written
by him in GSoC 2017; his standard copyright notice has been copied from
other files within the same directory to remain consistent with how he
clearly wished to portray it
