FICL definitions not in ficl/ficl32 files broke this generally. This
makes that stuff conditional on BOOT_FORTH. Also, move definitions
related to the architecture (FICL_CPUARCH and friends) into
Makefile.ficl that all parts of the tree that include files with ficl
need to include (but only if MK_FORTH == yes). In addition, had to fix
library ordering issue with LIBSTAND to keep it last. Without boot
forth, there's no references to memset to bring in memset.o from
libstand.a to satisfy libgeliboot.a's use of it. Listing libstand last
solves this issue (and it's the proper place for libstand to boot).
* On arm64 we need to use the ${MACHINE_CPUARCH} subdirectory.
* env.c is only needed when using forth so only build it there.
Sponsored by: ABT Systems Ltd
environment variable to allow conditional compilation based on EFI
being present or not. Provide efi-setenv, efi-getenv, and
efi-unsetenv, though those need improvement. Move the efi definition
to libefi (but include a reference so they get included).
The feature flags chek is missing the corner case where we have valid pool
version, but feature flags are not enabled - as for example plain v28 pool.
This update does fix the boot support for such pools.
Reviewed by: avg, allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D8331
Summary:
The Freescale e500v2 PowerPC core does not use a standard FPU.
Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor
unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the
stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this.
Additionaly, the SPE opcodes overlap with Altivec, so these are mutually
exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was
created with the same function set as in powerpc/powerpc/altivec.c, so it
becomes effectively a drop-in replacement. setjmp/longjmp were modified to save
the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by
the SPE).
Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not
support double-precision floating point.
Also, without a new MACHINE_ARCH it would be impossible to provide binary
packages which utilize the SPE.
Additionally, no work has been done to support ports, work is needed for this.
This also means no newer gcc can yet be used. However, gcc's powerpc support
has been refactored which would make adding a powerpcspe-freebsd target very
easy.
Test Plan:
This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222
(P1022-based) board, compiled against the new ABI. Base system utilities
(/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot
multiuser.
Reviewed By: bdrewery, imp
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D5683
The exported functions will be used by
Alpine Ethernet driver.
Obtained from: Semihalf
Submitted by: Michal Stanek <mst@semihalf.com>
Sponsored by: Annapurna Labs
Reviewed by: wma
Differential Revision: https://reviews.freebsd.org/D7763
This patch adds support for MSI-X interrupts
on Annapurna Alpine platform. MSI-X on Alpine
work similarly to GICv2m, i.e. some range of
SPI interrupts is reserved in GIC and individual
SPIs can be triggered by MSI-X messages.
This SPI range is defined in FDT.
Obtained from: Semihalf
Submitted by: Michal Stanek <mst@semihalf.com>
Sponsored by: Annapurna Labs
Reviewed by: nwhitehorn, wma
Differential Revision: https://reviews.freebsd.org/D7579
When detaching device trees parent devices must be detached prior to
detaching its children. This is because parent devices can have
pointers to the child devices in their softcs which are not
invalidated by device_delete_child(). This can cause use after free
issues and panic().
Device drivers implementing trees, must ensure its detach function
detaches or deletes all its children before returning.
While at it remove now redundant device_detach() calls before
device_delete_child() and device_delete_children(), mostly in
the USB controller drivers.
Tested by: Jan Henrik Sylvester <me@janh.de>
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D8070
MFC after: 2 weeks
etc. can find out where the SMBIOS entry point is located. In pure
UEFI mode the BIOS is not mapped into the standard address space so the
SMBIOS table might not appear between 0xf0000 and 0xfffff. The
UEFI environment can report this the location of the anchor. If it is
reported then expose it as hint.smbios.0.mem. This can then be used
by other tools. However, we should make smbios(4) useful and have it
take this value and provide accesor function so ipmi(4) etc. don't
have to parse and figure things about the SMBIOS table. I have some
simple patches to smbios(4) to expose this address as sysctl and
for ipmi(4) to get the base address. However, the real fix is to
have ipmi(4) ask smbios(4) for what it wants and have smbios(4)
parse it out and return it. This would make smbios(4) useful and reduce
duplicated code. If this address doesn't point to the anchor then
finding SMBIOS info. will fail as if this didn't exist. So there should
be no harm.
With this change and the following hack, dmidecode works on a bunch of
UEFI machines that I tested:
if kenv hint.smbios.0.mem > /dev/null
then
mkdir -p /sys/firmware/efi
mount -t tmpfs -o size=8k tmpfs /sys/firmware/efi
echo "SMBIOS=`kenv hint.smbios.0.mem`" > /sys/firmware/efi/systab
fi
Linux exposes this information via the /sys/firmware/efi/systab file which
dmidecode looks at. We should update dmidecode to do this the FreeBSD
way when we determine what that is!
Reviewed by: jhb
functions to call at the appropriate time to register new forth
words. In the past we've done this with ifdef soup, but now if the
file is included in the build, we'll get the new forth words.
Use this new functionality to move the pci bios stuff out of loader.c
by moving it to biospci.c.
Move the pnp functionality to common/pnp.c.
Move the inb/outb forth words to the i386 sysdep.c file where their
implementation is defined.
Adjust the efi linker scripts and build machinery to cope.
his should be an invisible change to forth scripts and user
experience.
Differential Revision: https://reviews.freebsd.org/D8145
than to store the location of a forth word that is subsequently never
used. It was last used before the 2.03 ficl upgrade in r51786. It was
only used from r43614 (so Feb-Sept 1999) on head and in the 3.x branch
(merged r43715 3.1 -> EOL). Remove it since nobody cared enough to
report the bug in the last 18 years rather than fix it. It's need
seems to have passed in the 2.03 ficl update.
Differential Revision: https://reviews.freebsd.org/D8150
replaced by /boot/loader.rc for 3.1 (r42682). In May 2000, this was
documented as deprecated (r61942) (between FreeBSD 4.0 and
4.1). Remove it since it's not been the preferred method in 17 years
and has been deprecated for 16.
Differential Revision: https://reviews.freebsd.org/D8142
dev_net.c code.
The NETIF_OPEN_CLOSE_ONCE flag was added in r201932 to prevent that behaviour
on some architectures (sparc64 and powerpc64) the default was left to always
open and close the device for each open and close of a file by the loader
because it was necessary for u-boot on arm.
Since it has been added, the flag was turned on for every arches including the
u-boot loader for arm.
This also fixes netbooting on RPi3 (tested by gonzo@)
For the loader.efi it greatly speeds up netbooting
Reviewed by: emaste, gonzo, tsoome
Approved by: gonzo
MFC after: 1 month
Sponsored by: Gandi.net
Differential Revision: https://reviews.freebsd.org/D8230
R_AARCH64_RELATIVE relocation found on arm64. It would try to add the
contents of the memory location being relocated to the base address and
the relocation addend. This worked when the contents was zero, however
this now seems to be set to the value of the addend so we add this twice.
Fix this by just setting the memory to the computed value.
Reviewed by: emaste
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D8177
When tsoome@ added skein support to the ZFS boot code and zfsloader, it
resulted in an explosion in code size, running close to a number of
limits.
The default for the C version of skein is to unroll all loops for
skein-256 and 512
Disabling the loop unrolling saves 20-28kb from each binary
boot1.efi
gptzfsboot
loader.efi
userboot.so
zfsloader
Reviewed by: emaste, tsoome
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D7826
Usually there is some slack after the last partition due to 4k alignment
In the 10.3 EC2 images, there was not. EC2 seems to hang if you try to
read past the end of the disk in the loader, resulting in an unbootable
instance after upgrading to 11.0
PR: 213196
Reported by: Peter Ankerstal <peter@pean.org>
Tested by: cperciva
Reviewed by: tsoome
MFC after: 3 days
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D8144
1. Size returned for variable name is in bytes, not CHAR16 (the
UEFI standard is unclear on this, where it is clear on the size of
the variable).
2. Dynamically allocate the buffers so we can grow them if someone
defines a super-long variable name.
These two fixes allow me to examine all the variables in my BIOS and
also removes the repeated printing of variables.
Technically touchscreen chip is FT5406 but all hardware
communication is performed by VideCore and only final results
are presented to ARM part through memory region shared between
VC and ARM.
evdev is used as userland interface. FT5406 supports up to
10 touchpoints, but for now driver emulates single touch device
because I do not have GUI bits to test this functionality.
Driver is not enabled in default config for RPI and RPI2
Tested with: evdev-dump, tslib
The command interpreter does leave command_errmsg as is after printing its
content, assuming the next command will reset it in bf_command(). However,
in case the forth native word is defined as builtin, the bf_command is not
used and forth words will also end up the command_errmsg content printed.
Since command_errmsg is pointer to actual error message, which can be static
read only string, we can not just set *command_errmsg = '\0', instead we need
to reset the pointer itself.
Illumos issue: https://www.illumos.org/issues/7405
Reported by: Igor Kozhukhov.
Reviewed by: allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D8032
files and, in a number of these places, there were problems with how they
were declared.
Some used int return instead of time_t. On some architectures the bit
width of time_t did not naturally fit into an integer and could lead to
some unexpected behavior. (For example, 32-bit ARM builds uses a 64-bit
time_t.)
Make sure the function prototypes always specify void for the argument
list when they do not have any arguemnts, otherwise some compilers can
complain about the prototype.
Reported by: Kevin Zheng
Reviewed by: sjg
Approved by: sjg (mentor)
Obtained from: Juniper Networks, Inc.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D7463
There is no way to see anything about the faults occuring in
loader.efi. Some intel BIOSes do output a line into serial port at
115200/8/1 regardless of the current port settings with the EFI error
number, but this is too little, and not always available, esp. if the
user does not know where to look.
The patch adds a simple facility to grab exceptions and at least dump
generic registers and some exception details. Due to the relative
complexity of correctly taking over the BIOS IDT setup, only install
the facility on user request.
Two new commands, 'grab_faults' and 'ungrab_faults' are provided,
first one takes over, second undoes the first. It is supposed that
user would execute 'grab' by the developer direction of collecting the
debugging data. The 'fault' command generates exception to test the
setup.
Fault handlers use dedicated stack to improve chances of catching
stack/TSS exceptions. Due to this, BIOS IDT is duplicated into a
private copy, and debugger needs to find a free GDT slot for TSS. This
is done in somewhat complicated efi_redirect_exceptions().
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D7935
trampoline page table. Also do some style cleanup.
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D7934
The fill pattern was previously an ia64 instruction sequence. Presumably
ia64's linker script was copied as a starting point.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
This commit adds drivers for Alpine Cache Coherency Unit
and North Bridge Service whose task is to configure
the system fabric and enable cache coherency.
Obtained from: Semihalf
Submitted by: Michal Stanek <mst@semihalf.com>
Sponsored by: Annapurna Labs
Reviewed by: wma
Differential Revision: https://reviews.freebsd.org/D7565
This is required on my system, which loads nvidia, vmm, and zfs, and 48M is
no longer enough for that. nvidia-driver's recent update increased its size
by several megabytes.
Reviewed by: jhb
MFC after: 1 week
not page aligned. To do this, use the ld script gnu ld installs on my
system.
This is imperfect: LDFLAGS_BIN and LD_FLAGS_BIN describe different
things. The loader script could be better named and take into account
other architectures. And having two different mechanisms to do
basically the same thing needs study. However, it's blocking forward
progress on lld, so I'll work in parallel to sort these out.
Differential Revision: https://reviews.freebsd.org/D7409
Reviewed by: emaste
The linker script CONSTRUCTORS keyword is only meaningful "when linking
object file formats which do not support arbitrary sections, such as
ECOFF and XCOFF"[1] and is ignored for other object file formats.
LLVM's lld does not yet accept (and ignore) CONSTRUCTORS, so just remove
CONSTRUCTORS from the linker script as it has no effect.
[1] https://sourceware.org/binutils/docs/ld/Output-Section-Keywords.html
