I have no idea what this does (and until now that it even existed), but
apparently it needs this entry changed for the MSG_TLSAPPDATA, since
it is kernel only.
Modern debuggers and process tracers use ptrace() rather than procfs
for debugging. ptrace() has a supserset of functionality available
via procfs and new debugging features are only added to ptrace().
While the two debugging services share some fields in struct proc,
they each use dedicated fields and separate code. This results in
extra complexity to support a feature that hasn't been enabled in the
default install for several years.
PR: 244939 (exp-run)
Reviewed by: kib, mjg (earlier version)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D23837
Attempting to use ioctls on /proc/<pid>/mem to control a process will
trigger warnings on the console. The <sys/pioctl.h> include file will
also now emit a compile-time warning when used from userland.
Reviewed by: emaste
MFC after: 1 week
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D23822
Any SHM_* flag here is (and likely will continue to be) a shmflag that may
be passed to shm_open2(), with exception to SHM_ANON. This is a prereq to
adding appropriate support to truss/kdump.
Reviewed by: kaktus (slightly earlier version)
Differential Revision: https://reviews.freebsd.org/D23733
I've been advised that the model that uses these are fairly resilient, but
we do know the proper path to use (or remove, in the case of ^/targets/...),
so go ahead and update them to reflect that.
Update a bunch of Makefile.depend files as
a result of adding Makefile.depend.options files
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22494
The default package use to be FreeBSD-runtime but it should only contain
binaries and libs enough to boot to single user and repair the system, it
is also very handy to have a package that can be tranform to a small mfsroot.
So create a new package named FreeBSD-utilities and make it the default one.
Also move a few binaries and lib into this package when it make sense.
Reviewed by: bapt, gjb
Differential Revision: https://reviews.freebsd.org/D21506
r349369 removed IP_MIN_MEMBERSHIPS and IPV6_MIN_MEMBERSHIPS, and r349893
removed TCP_RACK_SESS_CWV. libsysdecode lacked dependencies to trigger a
rebuild of tables.h.
Add explicit dependencies as a workaround to address these specific
cases; a holistic solution is still needed.
Sponsored by: The FreeBSD Foundation
There was an additional + after the {6} which is apparently ignored by the
FreeBSD regex implementation but was giving me an error when compiling on
MacOS.
While changing this also make sure that tables.h is not created if mktables
fails. The current rule would create a partial tables.h which causes following
incremental builds to use that broken file and fail with an unrelated
compilation error or even succeed even though they shouldn't.
Approved By: jhb (mentor)
Differential Revision: https://reviews.freebsd.org/D17069
Using find -s will not work with the Linux or MacOS find command. We pipe
to sort instead since the only real requirement here is that the order
stays the same. While I am touching this file I also fixed a `==` construct
which is not supported by POSIX sh but appears to work on FreeBSD.
Reviewed By: imp
Approved By: jhb (mentor)
Differential Revision: https://reviews.freebsd.org/D14246
This driver supports legacy, 32-bit PCI devices, and had an ambiguous
license. Supported devices were already reported to be rare in 2003
(when an earlier version of the driver was removed in r123201).
Reviewed by: rgrimes
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15245
In order to let truss(8) support tracing of 32-bit CloudABI
applications, we need to add a new ABI type to libsysdecode. We can
reuse the existing errno mapping table. Also link in the cloudabi32
system call table to translate system call names.
While there, remove all of the architecture ifdefs. There are not
needed, as the CloudABI data types and system call tables build fine on
any architecture. Building this unconditionally will make it easier to
do tracing for different compat modes, emulation, etc.
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D13516
- Add a new KTR_STRUCT_ARRAY ktrace record type which dumps an array of
structures.
The structure name in the record payload is preceded by a size_t
containing the size of the individual structures. Use this to
replace the previous code that dumped the kevent arrays dumped for
kevent(). kdump is now able to decode the kevent structures rather
than dumping their contents via a hexdump.
One change from before is that the 'changes' and 'events' arrays are
not marked with separate 'read' and 'write' annotations in kdump
output. Instead, the first array is the 'changes' array, and the
second array (only present if kevent doesn't fail with an error) is
the 'events' array. For kevent(), empty arrays are denoted by an
entry with an array containing zero entries rather than no record.
- Move kevent decoding tables from truss to libsysdecode.
This adds three new functions to decode members of struct kevent:
sysdecode_kevent_filter, sysdecode_kevent_flags, and
sysdecode_kevent_fflags.
kdump uses these helper functions to pretty-print kevent fields.
- Move structure definitions for freebsd11 and freebsd32 kevent
structures to <sys/event.h> so that they can be shared with userland.
The 32-bit structures are only exposed if _WANT_KEVENT32 is defined.
The freebsd11 structures are only exposed if _WANT_FREEBSD11_KEVENT is
defined. The 32-bit freebsd11 structure requires both.
- Decode freebsd11 kevent structures in truss for the compat11.kevent()
system call.
- Log 32-bit kevent structures via ktrace for 32-bit compat kevent()
system calls.
- While here, constify the 'void *data' argument to ktrstruct().
Reviewed by: kib (earlier version)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D12470
Previously we'd have an assertion failure in cap_rights_is_set if
sysdecode_cap_rights is called with an invalid cap_rights_t, so test for
validity first.
PR: 222258
Reviewed by: cem
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12391
Move tables that were previously in truss over to libsysdecode. truss
output is unchanged, but kdump has been updated to decode these fields.
In addition, sysdecode_sysarch_number() should support all platforms
whereas the old table in truss only supported x86.
Only filter out the PF ioctls if we're building without pf support.
Until now those were always filtered out, so truss did not show symbolic
names for pf ioctls.
Differential Revision: https://reviews.freebsd.org/D11629
This was originally added so that only one of diskmbr.h or diskpc98.h
was chosen and is no longer needed after PC98's removal. However, the
special handling was also broken as it effectively prevented the decoding
of ioctls declared in other headers such as <sys/disk.h> or
<sys/disklabel.h>.
This also avoids an error from egrep when a header is missing. This can happen
with something like WITHOUT_BLUETOOTH set when searching for
$include_dir/netgraph/bluetooth/include/ng_btsocket.h. The warning was
not an error (from set -e) due to being on the left side of a pipe. Now the
all_headers list is only filled with existing headers.
Reviewed by: ngie
MFC after: 3 days
Sponsored by: Dell EMC Isilon
Since buildenv exports SYSROOT all of these uses will now look in
WORLDTMP by default.
sys/boot/efi/loader/Makefile
A LIBSTAND hack is no longer required for buildenv.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
The reboot() system call accepts a mode (RB_AUTOBOOT, RB_HALT, RB_POWEROFF,
or RB_REROOT) as well as zero or more optional flags in 'howto'.
However, RB_AUTOBOOT was only displayed if 'howto' was exactly 0.
Combinations like 'RB_AUTOBOOT | RB_DUMP' were decoded as 'RB_DUMP'.
Instead, imply that RB_AUTOBOOT was specified if none of the other "mode"
flags were specified.
Add a new sysdecode_getrusage_who() which decodes the RUSAGE_* constant
passed as the first argument to getrusage(). Use this function in both
kdump and truss to decode the first argument to getrusage().
PR: 215448
Submitted by: Anton Yuzhaninov <citrin+pr@citrin.ru>
MFC after: 1 month
Decoding of the third argument depends on the first one. For doing this,
add a corresponding function to libsysdecode.
Thanks to jhb@ for suggesting this.
