Commit Graph

6074 Commits

Author SHA1 Message Date
Enji Cooper
c36a2f462d Add initial testcases for bin/ls
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
2015-09-28 03:36:15 +00:00
Adrian Chadd
ef4cd02bfa Enforce consistent limits of daemons run from rc.subr:
* Allow the user to configure the login class to use in rc.conf
  by using {daemon}_login_class, which;
* Use the daemon class by default;
* .. and then use 'limits' to set the login class so it works both
  via init at startup (which runs this in 'daemon' class) and via
  whichever root environment (eg command line, other daemons, etc.)

Reviewed by:	dteske
Differential Revision:	https://reviews.freebsd.org/D3630
2015-09-27 04:03:11 +00:00
Bryan Drewery
ec766071e3 META_MODE: Remove DEP_MACHINE from Makefile.depend files.
This has not been needed since r246865 in projects/bmake.

Sponsored by:	EMC / Isilon Storage Division
2015-09-25 19:44:01 +00:00
Bryan Drewery
54c7d75a06 META_MODE: Remove DEP_RELDIR from Makefile.depend files.
This has not been needed since r284171 in projects/bmake.

Sponsored by:	EMC / Isilon Storage Division
2015-09-25 19:26:08 +00:00
Ed Maste
05117b57a5 Install kernel debug data under /usr/lib/debug
This avoids needing a large boot partition / file system in order to
accommodate multiple kernels, and provides consistency with userland
debug. This also simplifies the process of moving kernel debug files
to a separate package and installing them on demand.

In addition, change kernel debug file extension to .debug, to match
userland debug files.

When using the supported kernel installation method the
/usr/lib/debug/boot/kernel directory will be renamed (to kernel.old)
as is done with /boot/kernel.

Developers wishing to maintain the historical behavior of installing
debug files in /boot/kernel/ can set KERN_DEBUGDIR="" in src.conf(5).

Reviewed by:	bdrewery, brooks, imp, markj
Relnotes:	yes
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D1006
2015-09-24 16:55:22 +00:00
Edward Tomasz Napierala
53639aebb7 The "automount" rc script should depend on "automountd", not the other
way around.

MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2015-09-18 06:54:52 +00:00
Hiroki Sato
65e59735e7 Use read to parse a line instead of set.
MFC after:	3 days
2015-09-10 06:56:56 +00:00
Hiroki Sato
657bbe97c1 - Add uid check.
- Report delay<0 as a warning.

MFC after:	3 days
2015-09-10 06:55:28 +00:00
Hiroki Sato
900905fdef Update only static routes when an interface is specified. This fixed
a bad side-effect reported in PR 202144.

PR:		202144
MFC after:	3 days
2015-09-10 06:47:23 +00:00
Gleb Smirnoff
7df2342225 Add iwm(4), that was missing in r287394.
Submitted by:	Shawn Webb
2015-09-02 14:38:16 +00:00
Gleb Smirnoff
e560791028 Fix dynamic attach/detach of 802.11 devices after r287197:
o In pccard_ether add code to start children of a 802.11
  device, that are configured in rc.conf.
o In devd.conf provide a regex matching all 802.11 devices,
  and on match run pccard_ether to spawn children.

PR:		202784
Submitted by:	<vidwer gmail.com>
In collaboration with:	"Oleg V. Nauman" <oleg opentransfer.com>
2015-09-02 12:46:42 +00:00
Peter Wemm
336318a8fa Fix a conversion error in rc.d/jail 2015-08-27 20:52:41 +00:00
Gleb Smirnoff
7a79cebfba Replay r286410. Change KPI of how device drivers that provide wireless
connectivity interact with the net80211 stack.

Historical background: originally wireless devices created an interface,
just like Ethernet devices do. Name of an interface matched the name of
the driver that created. Later, wlan(4) layer was introduced, and the
wlanX interfaces become the actual interface, leaving original ones as
"a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer
and a driver became a mix of methods that pass a pointer to struct ifnet
as identifier and methods that pass pointer to struct ieee80211com. From
user point of view, the parent interface just hangs on in the ifconfig
list, and user can't do anything useful with it.

Now, the struct ifnet goes away. The struct ieee80211com is the only
KPI between a device driver and net80211. Details:

- The struct ieee80211com is embedded into drivers softc.
- Packets are sent via new ic_transmit method, which is very much like
  the previous if_transmit.
- Bringing parent up/down is done via new ic_parent method, which notifies
  driver about any changes: number of wlan(4) interfaces, number of them
  in promisc or allmulti state.
- Device specific ioctls (if any) are received on new ic_ioctl method.
- Packets/errors accounting are done by the stack. In certain cases, when
  driver experiences errors and can not attribute them to any specific
  interface, driver updates ic_oerrors or ic_ierrors counters.

Details on interface configuration with new world order:
- A sequence of commands needed to bring up wireless DOESN"T change.
- /etc/rc.conf parameters DON'T change.
- List of devices that can be used to create wlan(4) interfaces is
  now provided by net.wlan.devices sysctl.

Most drivers in this change were converted by me, except of wpi(4),
that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing
changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann,
Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in
testing.

Reviewed by:	adrian
Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2015-08-27 08:56:39 +00:00
Marcel Moolenaar
d1a0d267b7 Upgrade libxo to 0.4.5.
Local changes incorporated by 0.4.5: r284340
Local changes retained: r276260, r282117

Obtained from:	https://github.com/Juniper/libxo
2015-08-24 16:26:20 +00:00
Alan Somers
d60f0f1c49 Add ATF functional tests for fstyp(8). No ZFS or GELI tests yet.
Reviewed by:	trasz, ngie
MFC after:	2 weeks
Sponsored by:	SpectraLogic
Differential Revision:	https://reviews.freebsd.org/D2801
2015-08-20 15:37:47 +00:00
Mark Felder
af588fdff7 etc/rc.d/hostname: permit setting hostname if already set
Approved by:	dteske
Differential Revision:	https://reviews.freebsd.org/D2577
2015-08-12 16:22:10 +00:00
Xin LI
e2870cb59a Disable building INDEX-9 and INDEX-10 because they are not useful for
users who uses only FreeBSD -CURRENT, and building these indexes are
only useful to those who share ports tree across different FreeBSD
releases, and system administrator with that need can always enable
this behavior.

MFC after:	2 weeks (only the principals, not actual change)
2015-08-11 22:43:28 +00:00
Adrian Chadd
3bce836420 Commit more of the reversion of r286410 . Sorry. 2015-08-10 06:12:24 +00:00
Adrian Chadd
86b6b0235b Finish reverting r286410 - sorry, I somehow missed this with svn commit. 2015-08-10 06:11:10 +00:00
Baptiste Daroussin
dadd8140c1 Properly sort 2015-08-09 14:46:18 +00:00
Baptiste Daroussin
6b1262b37f Add missing entry
Reported by:	antroine
2015-08-09 14:45:29 +00:00
Koop Mast
34c7eb57ed Add a new group named 'video' with the id of 44. And make drm create
devices in /dev/dri/ with this new group.

This will allow ports and users to more easily access to these devices
for OpenGL and OpenCL support.

Reviewed by:	dumbbell@
Approved by:	dumbbell@
Differential Revision:	https://reviews.freebsd.org/D1260
2015-08-09 12:58:56 +00:00
Gleb Smirnoff
79d2c5e857 Change KPI of how device drivers that provide wireless connectivity interact
with the net80211 stack.

Historical background: originally wireless devices created an interface,
just like Ethernet devices do. Name of an interface matched the name of
the driver that created. Later, wlan(4) layer was introduced, and the
wlanX interfaces become the actual interface, leaving original ones as
"a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer
and a driver became a mix of methods that pass a pointer to struct ifnet
as identifier and methods that pass pointer to struct ieee80211com. From
user point of view, the parent interface just hangs on in the ifconfig
list, and user can't do anything useful with it.

Now, the struct ifnet goes away. The struct ieee80211com is the only
KPI between a device driver and net80211. Details:

- The struct ieee80211com is embedded into drivers softc.
- Packets are sent via new ic_transmit method, which is very much like
  the previous if_transmit.
- Bringing parent up/down is done via new ic_parent method, which notifies
  driver about any changes: number of wlan(4) interfaces, number of them
  in promisc or allmulti state.
- Device specific ioctls (if any) are received on new ic_ioctl method.
- Packets/errors accounting are done by the stack. In certain cases, when
  driver experiences errors and can not attribute them to any specific
  interface, driver updates ic_oerrors or ic_ierrors counters.

Details on interface configuration with new world order:
- A sequence of commands needed to bring up wireless DOESN"T change.
- /etc/rc.conf parameters DON'T change.
- List of devices that can be used to create wlan(4) interfaces is
  now provided by net.wlan.devices sysctl.

Most drivers in this change were converted by me, except of wpi(4),
that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing
changes to at least 8 drivers. Thanks to Olivier Cochard, gjb@, mmoll@,
op@ and lev@, who also participated in testing. Details here:

https://wiki.freebsd.org/projects/ifnet/net80211

Still, drivers: ndis, wtap, mwl, ipw, bwn, wi, upgt, uath were not
tested. Changes to mwl, ipw, bwn, wi, upgt are trivial and chances
of problems are low. The wtap wasn't compilable even before this change.
But the ndis driver is complex, and it is likely to be broken with this
commit. Help with testing and debugging it is appreciated.

Differential Revision:	D2655, D2740
Sponsored by:	Nginx, Inc.
Sponsored by:	Netflix
2015-08-07 11:43:14 +00:00
Xin LI
9c354f41b3 Now that the portsnap buildbox is generating the raw bits for INDEX-11,
add it to the set of INDEX files built by portsnap.

MFC after:	2 weeks
2015-08-06 23:44:46 +00:00
Xin LI
f770ad4a26 Now that stable/8 is EOL, stop building INDEX-8.
MFC after:	1 week
2015-08-06 18:15:56 +00:00
Edward Tomasz Napierala
ebce46b2c6 Make rctl_enable rc variable actually work. To avoid breaking existing
setups that worked before, flip the default to "YES".  Most people don't
have /etc/rctl.conf, so they won't be affected in any way.

MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2015-08-05 17:38:02 +00:00
Enji Cooper
1b44fd7506 Update the comment about handling old-style rc(5) scripts
The old-style (*.sh) scripts in /etc/rc.d are explicitly ignored, whereas
other scripts ending in .sh are permitted
2015-08-05 03:03:57 +00:00
Jilles Tjoelker
738b6d4109 rc.subr: Allow rc.conf.d with multi-directory local_startup.
I also changed ${...%*/rc.d} to ${...%/rc.d} since the shortest match always
has an empty string for the asterisk.

PR:		201641
Submitted by:	Jamie Landeg-Jones (original version)
MFC after:	1 week
2015-08-01 22:00:25 +00:00
Marius Strobl
891c57d8a9 - Fix compilation after r285909 with USB_DEBUG defined.
- Regenerate usb.conf.
2015-07-27 14:43:14 +00:00
Baptiste Daroussin
c048a83f51 Replace GNU RCS ident with a BSD license ident
Rationale: ident(1) is useful out of RCS, lot of scripts are using ident(1) and
failing when base is built WITHOUT_RCS.

This version is:
- fully compatible with RCS 5.7 ident.
- fully compatible with RCS 5.9 ident.
- passes all ident test from GNU RCS 5.9 test suite

This version has support for: svn extension for the Keyword id (double colon and
# before last $)

Différences with GNU RCS ident:
- no long options as found in GNU RCS 5.9 (but not commented there).
- '-V' reports nothing but has been added for compatibility.

Differential Revision:	https://reviews.freebsd.org/D3200
Reviewed by:	pfg
2015-07-26 11:21:36 +00:00
Edward Tomasz Napierala
467fa589ce Remove a comment in the wrong place.
MFC after:	2 weeks
Sponsored by:	The FreeBSD Foundation
2015-07-18 12:25:47 +00:00
Jeremie Le Hen
29513c141f Allow again periodic scripts to be run from command-line.
PR:		188109
Submitted by:	Jason Unovitch
MFC after:	1 week
2015-07-13 10:15:01 +00:00
Mark Murray
4cbf30133e Address review.
Differential Revision: https://reviews.freebsd.org/D2924
2015-07-08 18:46:44 +00:00
Hiroki Sato
754f368cda - Add IPv6 support in quota(1). While rpc.rquotad has supported PF_INET6
for a long time, quota(1) utility supported only PF_INET.

- Clean up confusing changes in f_mntfromname.

- Add an entry for rquotad with rpc/udp6 to inetd.conf.

PR:	194084
2015-07-07 20:15:09 +00:00
Gregory Neil Shapiro
55c311792e Minor changes to force commit these files so new freebsd*.cf files are
built to use the new sendmail-8.15.2/cf tree.

MFC after:	3 days
2015-07-07 03:00:57 +00:00
Mark Murray
c4f9c760c9 Updated random(4) boot/shutdown scripting.
Fix the man pages as well.

Differential Revision: https://reviews.freebsd.org/D2924
Approved by: so (delphij)
2015-06-30 17:09:41 +00:00
Christian Brueffer
d1436e9708 Add CouchDB ports (5984 TCP/UDP).
PR:		193268
Submitted by:	yuri@rawbw.com
MFC after:	1 week
2015-06-29 15:38:34 +00:00
Julian Elischer
c2adbeaaac Slight tidy up of comments before MFC
MFC after:	2 days
2015-06-29 07:43:09 +00:00
Patrick Kelsey
821f1f1c9d Use correct flag in iovctl_start().
Differential Revision: https://reviews.freebsd.org/D2921
Reviewed by: rstone
Approved by: jmallett (mentor)
Sponsored by: Norse Corp, Inc.
2015-06-27 18:01:50 +00:00
Julian Elischer
ef52ea2155 remove 16 rules and replace by 2 by using a table
I've been doing this ever since there were tables
coudl make more efficient by using "in recv"  and "out xmit" instead of via
but I'll leave that.

MFC after:	1 week
2015-06-22 04:25:41 +00:00
Glen Barber
07a275ab32 Enable ttyu1, ttyu2, ttyu3 for arm installations.
This should make all consoles available, whether it
is VGA, HDMI, serial, or JTAG, but more importantly
enables all consoles when ttyu0 is not predictable.
For example, the Pandaboard ES apparently has three
consoles available, but the DB9/RS232 serial port is
ttyu2, so not available by default after the system
boots.

MFC after:	3 days
Sponsored by:	The FreeBSD Foundation
2015-06-21 19:50:02 +00:00
Hans Petter Selasky
266c631ac0 Regenerate usb.conf .
MFC after:	1 week
2015-06-19 09:37:37 +00:00
Simon J. Gerraty
ccfb965433 Add META_MODE support.
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.

Still need to add real targets under targets/ to build packages.

Differential Revision:       D2796
Reviewed by: brooks imp
2015-06-13 19:20:56 +00:00
Glen Barber
c426d0d1f7 Re-implement endian-aware services_mkdb(8) in the 'distribute'
target.  This effectively reverts r261142, which reverted both
r261031 and r261044.

Prodded by:	jhb
MFC after:	1 week
Sponsored by:	The FreeBSD Foundation
2015-06-04 15:02:05 +00:00
Baptiste Daroussin
1a31e4a637 After r283981 it is no more needed to specify endianness when generating the
passwd database
2015-06-04 08:05:44 +00:00
Simon J. Gerraty
98e0ffaefb Merge sync of head 2015-05-27 01:19:58 +00:00
Dimitry Andric
ef6fa9e26d Upgrade our copy of clang and llvm to 3.6.1 release.
This release contains the following cherry-picked revisions from
upstream trunk:

  226124 226151 226164 226165 226166 226407 226408 226409 226652
  226905 226983 227084 227087 227089 227208 227209 227210 227211
  227212 227213 227214 227269 227430 227482 227503 227519 227574
  227822 227986 227987 227988 227989 227990 228037 228038 228039
  228040 228188 228189 228190 228273 228372 228373 228374 228403
  228765 228848 228918 229223 229225 229226 229227 229228 229230
  229234 229235 229236 229238 229239 229413 229507 229680 229750
  229751 229752 229911 230146 230147 230235 230253 230255 230469
  230500 230564 230603 230657 230742 230748 230956 231219 231237
  231245 231259 231280 231451 231563 231601 231658 231659 231662
  231984 231986 232046 232085 232142 232176 232179 232189 232382
  232386 232389 232425 232438 232443 232675 232786 232797 232943
  232957 233075 233080 233351 233353 233409 233410 233508 233584
  233819 233904 234629 234636 234891 234975 234977 235524 235641
  235662 235931 236099 236306 236307

Please note that from 3.5.0 onwards, clang and llvm require C++11
support to build; see UPDATING for more information.
2015-05-25 13:43:03 +00:00
Peter Wemm
e9de8580dc Adjust default argument construction for -c to be getopt compliant for
consistency, even though unbound understood it.
2015-05-22 21:33:13 +00:00
Enji Cooper
7afb8adff3 Move all test integration pieces for etc/ from etc/ to tests/
This is being done to fix breakage with make distribution with read-only
source trees as make distribution doesn't use make obj like building
tests/ does in all cases

Reported by: Wolfgang Zenker <wolfgang@lyxys.ka.sub.org>
Suggested by: jhb
X-MFC with: r282059
MFC after: 1 week
2015-05-18 11:02:43 +00:00
Xin LI
1d79f30229 Revert r282672.
tr is in /usr and not available at the time hostid is run (must be run
before FILESYSTEMS).

Reported by:	def
2015-05-11 00:16:32 +00:00