adds a lock to ensure only a single device is accessing the hardware. A
reference count is added to only enable when we start to use the clock,
and to disable after we have finished needing the clock.
This was extracted from a larger review to add OHCI support to the
Allwinner SoCs.
Submitted by: Emmanuel Vadot <manu@bidouilliste.com>
Reviewed by: jmcneill
X-Differential Revision: https://reviews.freebsd.org/D5481
This mistakenly removed the SUBDIR_PARALLEL but even worse is that the install
(and build) order is not correct due to the lack of SUBDIR_DEPEND on the
most critical libraries. The only reason they build correctly now is because
buildworld's 'make libraries' orders them properly.
Pointyhat to: bdrewery
Sponsored by: EMC / Isilon Storage Division
Remove building of the legacy makewhatis(1) since it was only needed for
6.0 upgrades.
On my 2.2 GHz system libsqlite3 takes 60-100 seconds to build, which due to
its serialized nature can hold up the build waiting on it to finish in
bootstrap-tools.
makewhatis(1) was only required to be a build tool to support upgrades
from 6.0 which was properly removed in r208324 but later reverted due to
installworld using it. The installworld issue was fixed in r275622
when it was added to ITOOLS. A BOOTSTRAPPING check was missed when
makewhatis(1) was replaced with mandoc in r283777.
Sponsored by: EMC / Isilon Storage Division
The only relevant change here is the support for IPv6 in the config
file. The previous version of this supported IPv6 but not in the
config. The change for that ended up removing __sdp_sockaddr_to_sdp
which the IPV4 config code required; the IPv6 fix resolved the lack of
that symbol.
Note that the ChangeLog was lacking entries for which we already had the
changes for, which itself was an upstream bug.
Obtained from: https://www.openfabrics.org/downloads/libsdp/libsdp-1.1.108-0.17.ga6958ef.tar.gz
Sponsored by: EMC / Isilon Storage Division
There is no good way to guess if any of these will be needed but
they commonly are and add no extra overhead so just stage them.
Sponsored by: EMC / Isilon Storage Division
When not using NO_ROOT the DESTDIR is implicitly created by the
distrib-dirs call. However with NO_ROOT it is trying to write
to the METALOG right away before running distrib-dirs which
may fail.
Sponsored by: EMC / Isilon Storage Division
The defines for xdr_rpc* in xdr.h are wrong. It could be
very well that Solaris did strip the '_t' from xdr_u_int32_t,
but Solaris has a xdr_u_int32 function, we don't have this.
So all of this defines will lead to an unresolved symbol.
This explains why we do not use these functions in FreeBSD
while they are used in Illumos/Solaris.
Obtained from: linux libtirpc (git 7864122e61ffe4db1aa8ace89117358a1e3a391b)
MFC after: 3 weeks
For hz=1000 any number, greater than 4194 causes integer overflow;
this change casts the number to uint64_t before operating with it.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D5268
An empty debug link target previously returned a confusing and incorrect
error like "objcopy: fread failed: No error: 0". Now, return an explicit
error.
GNU objcopy allows an empty file as the debug link target. However,
that case is nonsensical so diverging from GNU behaviour is fine.
Reviewed by: bdrewery
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5541
filesystem to the nullfs mount.
MNTK_NO_IOPF must be present on the nullfs struct mount so that struct
file fo_read and fo_write fops operate in the mode requested by the
lower mount.
MNTK_UNMAPPED_BUFS allows VOP_GETPAGES() to use unmapped buffers. It
does not matter for VOP_GETPAGES() calls from vm_fault() since handle
of the vm_object always points to the lower vnode. But it may be
useful for other situations where VOP_GETPAGES() is used.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Avoid casting gymnastics that lead to pointer aliasing by introducing an
inline function as done in NetBSD (but without #if0'd WIP code).
Obtained from: NetBSD (CVS Rev. 1.24, 1.25)
update to the latest internal shared code.
- Add a chip_params structure to keep track of hardware constants for
all generations of Terminators handled by cxgbe.
- Update t4_hw_pci_read_cfg4 to work with T6.
- Update the hardware debug sysctls (hidden within dev.<tNnex>.<n>.misc.*) to
work with T6. Most of the changes are in the decoders for the CIM
logic analyzer and the MPS TCAM.
- Acquire the regwin lock around indirect register accesses.
Obtained from: Chelsio Communications
Sponsored by: Chelsio Communications
Each channel contains one RX ring and one TX ring. And we
try to distribute the channels to different evenly.
Note: Currently we don't have enough information to extract
the RSS type and RSS hash value from the received packets.
This greatly improves the TX/RX performance for 8 virtual CPU
Hyper-V over 10Ge: it can max out 10Ge for TCP when multiple
RX/TX rings are enabled.
This almost doubles the TX/RX performance for locally connected
Hyper-Vs: was 6Gbps w/ 128 TCP streams, now 11Gbps w/ multiple
RX/TX rings enabled.
It is not enabled by default; it will be switched on after more
tests.
Collaborated with: Hongjiang Zhang <honzhan microsoft com>
MFC after: 2 week
Sponsored by: Microsoft OSTC
Very similar to the A10 RTC controller with a few register offsets changed
and a different location for the LOSC switch status.
Submitted by: Emmanuel Vadot <manu@bidouilliste.com>
Reviewed by: jmcneill
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D5500
Do not use ic_macaddr as a storage for current BSSID;
it may be reused in vap creation procedure;
similar to r288619.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D5513
This warning is irrelevant, since user can execute
'ifconfig wlan0 down' (or turn off card via rfkill switch) at any time.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D5511
Currently the base.txz distribution does not get the BSD.debug.dist mtree
extracted into it. So if you start from that and then try to build a 3rd-party
application outside of buildworld it will by-default try installing the
debug files into a missing directory if they are being installed into /usr/lib.
Check for the existence before forcing the directory to be created rather than
the older way of running a shell command with test -d || mkdir -p always.
Reported by: HardenedBSD (https://github.com/HardenedBSD/secadm/issues/23)
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D5411
for output and drop; connect didn't always fire a user probe
some probes were missing in fastpath
Submitted by: Hannes Mehnert
Sponsored by: REMS, EPSRC
Differential Revision: https://reviews.freebsd.org/D5525
SunRPC is using xp_sock in SVCXPRT, while TI-RPC is using
xp_fd. Add a compatibility define.
Illumos has something similar for the non-kernel case.
Obtained from: linux-nfs project (git 0d94036c3a0d4c24d22bf6a8c40ac6625d972c29)
