This option was added as a transition aide when symbol versioning was
first added. It was enabled by default in 2007 and is supported even
by the old GPLv2 binutils. Trying to disable it currently fails to
build in libc and at this point it isn't worth fixing the build.
Reported by: Michael Dexter
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D24637
A number of components require OpenSSL and fail to build if it is not
enabled. As a first phase force these off under WITHOUT_OPENSSL. A
second phase should make these more fine-grained, allowing the component
to build but without OpenSSL.
PR: 245931
Sponsored by: The FreeBSD Foundation
Gordon Bergling. Hook it up to the build by adding
it to the Makefile.
Submitted by: gbergling_gmail.com
Approved by: bcr
Differential Revision: https://reviews.freebsd.org/D24589
epoch(9).
In one instance, remove a trailing whitespace while here.
Submitted by: gbergling_gmail.com
Approved by: bcr
Differential Revision: https://reviews.freebsd.org/D24243
section, it would result in the following error:
"ngctl: send msg: Invalid argument"
The reason for this is the missing whitespace to
separate the arguments. When adding the whitespace,
the example works as intended.
Submitted by: lutz_donnerhacke.de
Approved by: bcr
Differential Revision: https://reviews.freebsd.org/D23773
- Add a new TCP_RXTLS_ENABLE socket option to set the encryption and
authentication algorithms and keys as well as the initial sequence
number.
- When reading from a socket using KTLS receive, applications must use
recvmsg(). Each successful call to recvmsg() will return a single
TLS record. A new TCP control message, TLS_GET_RECORD, will contain
the TLS record header of the decrypted record. The regular message
buffer passed to recvmsg() will receive the decrypted payload. This
is similar to the interface used by Linux's KTLS RX except that
Linux does not return the full TLS header in the control message.
- Add plumbing to the TOE KTLS interface to request either transmit
or receive KTLS sessions.
- When a socket is using receive KTLS, redirect reads from
soreceive_stream() into soreceive_generic().
- Note that this interface is currently only defined for TLS 1.1 and
1.2, though I believe we will be able to reuse the same interface
and structures for 1.3.
The sysctl output looks like this:
dev.hwpstate_intel.0.epp: 50
dev.hwpstate_intel.0.%parent: cpu0
dev.hwpstate_intel.0.%pnpinfo:
dev.hwpstate_intel.0.%location:
dev.hwpstate_intel.0.%driver: hwpstate_intel
dev.hwpstate_intel.0.%desc: Intel Speed Shift
but all the '%' got escaped in the manual page, un-escape them.
While here:
- Move the example of dev.hwpstate_intel.%d.%parent after the description to
align with others.
- Capitalize "CPU" (*)
Submitted by: danfe (*)
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D24520
The sole in-tree user of this flag has been retired, so remove this
complexity from all drivers. While here, add a helper routine drivers
can use to read the current request's IV into a local buffer. Use
this routine to replace duplicated code in nearly all drivers.
Reviewed by: cem
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D24450
instead of MK_KERBEROS. The reason for this change is some users
prefer to build FreeBSD WITHOUT_KERBEROS, wanting to retain the
Kerberos rc scripts to start/stop MIT Kerberos or Heimdal from ports.
PR: 197337
Reported by: Adam McDougall <ebay at looksharp.net>
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D24252
According to the upstream man page (which we don't install), none of
libauditd's symbols are intended to be public. Also, I can't find any
evidence for a port that uses libauditd. Therefore, we should treat it like
other such libraries and use PRIVATELIB.
Reported by: phk
Reviewed by: cem, emaste
MFC after: 2 weeks
It is not valid to pass BUS_SPACE_UNRESTRICTED to bus_dma_tag_create()'s
nsegments parameter as it is interpreted as a very large segment count.
Subsequent allocation operations on the tag will preallocate some multiple of
that count. BUS_SPACE_UNRESTRICTED therefore indicates something like:
malloc(infinity).
Discussed with: bcr, jhb (earlier version)
This change allows any downstream or otherwise consumer to easily override
the new -fno-common default on a temporary basis without having to hack into
src.sys.mk, and also makes it a bit easier to search for these specific
cases where -fno-common must be overridden with -fcommon or else the build
will fail.
The gdb build, the only program requiring -fcommon on head/, is switched
over as an example usage. It will need it on all branches, so this does not
harm future mergability.
MFC after: 3 days
on all major Linux distributions as well as NetBSD and OpenBSD.
Remove the undocumented ZONEINFO_OLD_TIMEZONES_SUPPORT and the deprecated
OLDTIMEZONES knobs as they are now the default.
Reviewed by: ngie, rgrimes
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24306
-fno-common will become the default in GCC10/LLVM11. Plenty of work has been
put in to make sure our world builds are no -fno-common clean, so let's slap
the build with this until it becomes the compiler default to ensure we don't
regress.
At this time, we will not be enforcing -fno-common on ports builds. I
suspect most ports will be or quickly become -fno-common clean as they're
naturally built against compilers that default to it, so this will hopefully
become a non-issue in due time. The exception to this, which is actually the
status quo, is that kmods built from ports will continue to build with
-fno-common.
As of the time of writing, I intend to also make stable/12 -fno-common
clean. What's been done will be MFC'd to stable/11 if it's easily applicable
and/or not much work to massage it into being functional, but I anticipate
adding -fcommon to stable/11 builds to maintain its ability to be built with
newer compilers for the rest of its lifetime instead of putting in a third
branch's worth of effort.
instead of sprinkling them out over many disjoint files. This is a follow-up
to achieve the same goal in an incomplete rev.348521.
Approved by: imp
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D20520
By using -nobuiltininc and adding the clang builtin headers resource dir
to the end of the compiler header search path, we can still find headers
such as immintrin.h but find the FreeBSD version of stddef.h/stdarg.h/..
first.
This is a workaround until we are able to settle on and complete a plan
to harmonize guard macros with LLVM. We've mostly worked out this on
FreeBSD systems by removing select headers from the installed set of
devel/llvm*, but that isn't a good solution for cross build.
Submitted by: arichardson
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17002
For head/, this will remain eternally default-on to maintain the status quo.
For stable/ branches, it should be flipped to default-off to maintain the
status quo.
There's value in being able to flip it one way or the other easily on head
or stable branches, whether you want to gain some performance back on head/
(for machines there's little chance you'll actually hit an assertion) or
potentially diagnose a problem with the version of llvm on an older branch.
Currently, stable branches get the CFLAGS+= -ndebug line uncommented; going
forward, they will instead have the default of LLVM_ASSERTIONS flipped.
Reviewed by: dim, emaste, re (gjb)
MFC after: 1 week
MFC note: flip the default of LLVM_ASSERTIONS
Differential Revision: https://reviews.freebsd.org/D24264
This driver hasn't been relevant in almost 15 years. It was for a product on the
shelves for about 6 months in 2003/2004. I've not updated the driver since then,
and have had nobody talk to me about it since maybe 2006 or 2007. It doesn't
implement a standard interface, and can be better done with libusb. All the
action has moved to webcamd for newer, more fully featured hardware. It makes no
appearances in the nycbug dmesg archive.
Relnotes: yes
MFC After: 3 days
I hope to extend this with some more detail in the future but it gives
a good starting point.
Thanks to 0mp for assistance with markup.
Reviewed by: jkoshy
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23982
If INTERNALLIB is defined we need PIE and bsd.incs.mk is
not included.
PR: 245189
Reviewed by: emaste
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org//D24233
Document the kernels and worlds targets. Document the TARGETS and EXTRA_TARGETS
variables.
Reviewed by: brooks, bdrewery, emaste (LGTM)
MFC After: 3 days
Differential Revision: https://reviews.freebsd.org/D24212
Add 'WITHOUT_WORLDS' and 'WITHOUT_KERNELS' as aliases for the inconsistently
named MAKE_JUST_KERNELS and MAKE_JUST_WORLDS respectively. I always forget the
MAKE_ part (or is it BUILD_), and it's inconsistent with everything
else. Document the new things, but leave speculation of any eventual MAKE_JUST_*
deprecation out of the manuals and comments.
Reviewed by: brooks, bdrewery, emaste (LGTM)
MFC After: 3 days
Differential Revision: https://reviews.freebsd.org/D24212
This is handy for making local hacks to an app
(eg to build it as tool for non-BSD host)
without making a mess of the code base.
Reviewed by: bdrewery
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org//D24101
for IPv4, enabled only for IPv6, and enabled for IPv4 and IPv6.
The current blackhole detection might classify a temporary outage as
an MTU issue and reduces permanently the MSS. Since the consequences of
such a reduction due to a misclassification are much more drastically
for IPv4 than for IPv6, allow the administrator to enable it for IPv6 only.
Reviewed by: bcr@ (man page), Richard Scheffenegger
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D24219
EINTEGRITY was previously documented as a UFS-specific error for
mount(2). This documents EINTEGRITY as a filesystem-independent error
that may be reported by the backing store of a filesystem.
While here, document EIO as a filesystem-independent error for both
mount(2) and posix_fadvise(2). EIO was previously only documented for
UFS for mount(2).
Reviewed by: mckusick
Suggested by: mckusick
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24168
I did add some more glyphs to provide box drawing and set of additional
glyphs to provide better support for some code pages. Still does not quite
match terminus.
In-tree gdb is essentially obsolete. We kept it for sparc64 (because
gdb in ports lacked sparc64 support) and as a fallback for crashinfo.
gdb was installed to /libexec on all archs other than sparc64, where the
WITHOUT_GDB_LIBEXEC option was default, with gdb installed to /usr/bin.
With sparc64's retirement WITH_GDB_LIBEXEC became the default for all
architectures, but it was still possible to set it off and install gdb
into /usr/bin.
As the next step in gdb's retirement, remove the option and install gdb
only into /libexec as the crashinfo fallback. We expect users to install
the gdb port or package for debugging. The in-tree gdb lacks support for
a number of supported architectures and does not support contemporary
DWARF debug info.
Reviewed by: jhb (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24227
net.inet.tcp.pmtud_blackhole_detection. Also remove three entries,
which are not sysctl variables but statistic counters for TCP.
Thanks to 0mp@ for suggesting an improvement.
Reviewed by: bcr@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D24216
- The linked list of cryptoini structures used in session
initialization is replaced with a new flat structure: struct
crypto_session_params. This session includes a new mode to define
how the other fields should be interpreted. Available modes
include:
- COMPRESS (for compression/decompression)
- CIPHER (for simply encryption/decryption)
- DIGEST (computing and verifying digests)
- AEAD (combined auth and encryption such as AES-GCM and AES-CCM)
- ETA (combined auth and encryption using encrypt-then-authenticate)
Additional modes could be added in the future (e.g. if we wanted to
support TLS MtE for AES-CBC in the kernel we could add a new mode
for that. TLS modes might also affect how AAD is interpreted, etc.)
The flat structure also includes the key lengths and algorithms as
before. However, code doesn't have to walk the linked list and
switch on the algorithm to determine which key is the auth key vs
encryption key. The 'csp_auth_*' fields are always used for auth
keys and settings and 'csp_cipher_*' for cipher. (Compression
algorithms are stored in csp_cipher_alg.)
- Drivers no longer register a list of supported algorithms. This
doesn't quite work when you factor in modes (e.g. a driver might
support both AES-CBC and SHA2-256-HMAC separately but not combined
for ETA). Instead, a new 'crypto_probesession' method has been
added to the kobj interface for symmteric crypto drivers. This
method returns a negative value on success (similar to how
device_probe works) and the crypto framework uses this value to pick
the "best" driver. There are three constants for hardware
(e.g. ccr), accelerated software (e.g. aesni), and plain software
(cryptosoft) that give preference in that order. One effect of this
is that if you request only hardware when creating a new session,
you will no longer get a session using accelerated software.
Another effect is that the default setting to disallow software
crypto via /dev/crypto now disables accelerated software.
Once a driver is chosen, 'crypto_newsession' is invoked as before.
- Crypto operations are now solely described by the flat 'cryptop'
structure. The linked list of descriptors has been removed.
A separate enum has been added to describe the type of data buffer
in use instead of using CRYPTO_F_* flags to make it easier to add
more types in the future if needed (e.g. wired userspace buffers for
zero-copy). It will also make it easier to re-introduce separate
input and output buffers (in-kernel TLS would benefit from this).
Try to make the flags related to IV handling less insane:
- CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv'
member of the operation structure. If this flag is not set, the
IV is stored in the data buffer at the 'crp_iv_start' offset.
- CRYPTO_F_IV_GENERATE means that a random IV should be generated
and stored into the data buffer. This cannot be used with
CRYPTO_F_IV_SEPARATE.
If a consumer wants to deal with explicit vs implicit IVs, etc. it
can always generate the IV however it needs and store partial IVs in
the buffer and the full IV/nonce in crp_iv and set
CRYPTO_F_IV_SEPARATE.
The layout of the buffer is now described via fields in cryptop.
crp_aad_start and crp_aad_length define the boundaries of any AAD.
Previously with GCM and CCM you defined an auth crd with this range,
but for ETA your auth crd had to span both the AAD and plaintext
(and they had to be adjacent).
crp_payload_start and crp_payload_length define the boundaries of
the plaintext/ciphertext. Modes that only do a single operation
(COMPRESS, CIPHER, DIGEST) should only use this region and leave the
AAD region empty.
If a digest is present (or should be generated), it's starting
location is marked by crp_digest_start.
Instead of using the CRD_F_ENCRYPT flag to determine the direction
of the operation, cryptop now includes an 'op' field defining the
operation to perform. For digests I've added a new VERIFY digest
mode which assumes a digest is present in the input and fails the
request with EBADMSG if it doesn't match the internally-computed
digest. GCM and CCM already assumed this, and the new AEAD mode
requires this for decryption. The new ETA mode now also requires
this for decryption, so IPsec and GELI no longer do their own
authentication verification. Simple DIGEST operations can also do
this, though there are no in-tree consumers.
To eventually support some refcounting to close races, the session
cookie is now passed to crypto_getop() and clients should no longer
set crp_sesssion directly.
- Assymteric crypto operation structures should be allocated via
crypto_getkreq() and freed via crypto_freekreq(). This permits the
crypto layer to track open asym requests and close races with a
driver trying to unregister while asym requests are in flight.
- crypto_copyback, crypto_copydata, crypto_apply, and
crypto_contiguous_subsegment now accept the 'crp' object as the
first parameter instead of individual members. This makes it easier
to deal with different buffer types in the future as well as
separate input and output buffers. It's also simpler for driver
writers to use.
- bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer.
This understands the various types of buffers so that drivers that
use DMA do not have to be aware of different buffer types.
- Helper routines now exist to build an auth context for HMAC IPAD
and OPAD. This reduces some duplicated work among drivers.
- Key buffers are now treated as const throughout the framework and in
device drivers. However, session key buffers provided when a session
is created are expected to remain alive for the duration of the
session.
- GCM and CCM sessions now only specify a cipher algorithm and a cipher
key. The redundant auth information is not needed or used.
- For cryptosoft, split up the code a bit such that the 'process'
callback now invokes a function pointer in the session. This
function pointer is set based on the mode (in effect) though it
simplifies a few edge cases that would otherwise be in the switch in
'process'.
It does split up GCM vs CCM which I think is more readable even if there
is some duplication.
- I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC
as an auth algorithm and updated cryptocheck to work with it.
- Combined cipher and auth sessions via /dev/crypto now always use ETA
mode. The COP_F_CIPHER_FIRST flag is now a no-op that is ignored.
This was actually documented as being true in crypto(4) before, but
the code had not implemented this before I added the CIPHER_FIRST
flag.
- I have not yet updated /dev/crypto to be aware of explicit modes for
sessions. I will probably do that at some point in the future as well
as teach it about IV/nonce and tag lengths for AEAD so we can support
all of the NIST KAT tests for GCM and CCM.
- I've split up the exising crypto.9 manpage into several pages
of which many are written from scratch.
- I have converted all drivers and consumers in the tree and verified
that they compile, but I have not tested all of them. I have tested
the following drivers:
- cryptosoft
- aesni (AES only)
- blake2
- ccr
and the following consumers:
- cryptodev
- IPsec
- ktls_ocf
- GELI (lightly)
I have not tested the following:
- ccp
- aesni with sha
- hifn
- kgssapi_krb5
- ubsec
- padlock
- safe
- armv8_crypto (aarch64)
- glxsb (i386)
- sec (ppc)
- cesa (armv7)
- cryptocteon (mips64)
- nlmsec (mips64)
Discussed with: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D23677
Now that LLD 10 is out, and required patches have landed, we are now ready
to finally switch away from the ancient in-tree ld.bfd.
Special thanks to Fangrui Song for many hours of work on getting the
32-bit powerpc lld ready for prime-time.
Reviewed by: emaste (earlier revision), jhibbits
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D24111
Original commit message:
bsd.lib.mk: Do not include bsd.incs.mk for INTERNALLIB
f we're building an internal lib do not bother including bsd.incs.mk so we
will not install the headers.
This also "solves" a problem with pkgbase where a libXXX-development package
is created and due to how packages are created we add a dependency to a
libXXX package that doesn't exists.
If we're building an internal lib do not bother including bsd.incs.mk so we
will not install the headers.
This also "solves" a problem with pkgbase where a libXXX-development package
is created and due to how packages are created we add a dependency to a
libXXX package that doesn't exists.
Reported by: pizzamig
Reviewed by: pizzamig bapt emaste
Differential Revision: https://reviews.freebsd.org/D24166
Having kyua in the base system will simplify automated testing in CI and
eliminates bootstrapping issues on new platforms.
The build of kyua is controlled by WITH(OUT)_TESTS_SUPPORT.
Reviewed by: emaste
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24103
It is added an INTERNALLIB and not installed. It will be used by kyua.
This is a preparatory commit for D24103.
Reviewed by: emaste
Obtained from: CheriBSD
Sponsored by: DARPA
MIPS was the last arch to use external toolchain by default but uses
in-tree Clang and lld as of r359233, and now no table entries reference
the footnote.
All FreeBSD archs now use an in-tree toolchain - Clang and ELF Tool
Chain everywhere, and lld everywhere but 32-bit PowerPC (which still
uses ld.bfd). No archs use external toolchain by default.
Sponsored by: The FreeBSD Foundation
Now that we have updated the in-tree version of LLVM to 10.0, we have all the
necessary LLVM changes to use Clang+LLD as the default toolchain for MIPS.
Relnotes: yes
Reviewed By: emaste, jhb, brooks, kevans
Differential Revision: https://reviews.freebsd.org/D23204
Use TARGET_ARCH and/or MACHINE_ARCH exclusively. Change all __TT uses to __T
with appropriate translations. MACHINE/TARGET is to be used only for kernel
things, and this fixes the last few stragglers.
The devices supported by these drivers are obsolete ISA cards, and the
sync serial protocols they supported are essentially obsolete too.
Sponsored by: The FreeBSD Foundation
Use TARGET_ARCH and/or MACHINE_ARCH exclusively. Change all __TT uses to __T
with appropriate translations. MACHINE/TARGET is to be used only for kernel
things.
Delete the conditions that forcibly disabled GOOGLETEST and LLDB for
pre-C++11 C++ compilers, since we no longer support such compilers.
Also delete the complicated method of defaulting LIBCPLUSPLUS to YES.
Prodded by: kevans
Sponsored by: The FreeBSD Foundation
We no longer support older C++ compilers, so do not need to explicitly
test for C++11 support.
After r339946 we stopped running `cc --version` during cleandir/obj
stages, so stopped setting COMPILER_FEATURES. This in turn meant
lib/libomp was excluded from the clean stage in a normal buildworld
(i.e., one without -DNO_CLEAN), and this is what caused recent build
failures with errors about missing ittnotify_static.c.
This commit should obviate the need for the workaround committed in
r359083. Thanks to bdrewery for the insight and for pushing for a
correct fix. There are more cleanups to be done, but this change is
a simplification and an improvement over r359083.
Sponsored by: The FreeBSD Foundation
This allows simplification of Makefiles where some SUBDIR entries depend
on two things (e.g. something that depends on C++ and some other knob).
Discussed with: imp, jhb
Obtained from: CheriBSD
MFC after: 3 days
Sponsored by: DARPA
The new liblua will be used in a forthcoming import of kyua.
Reviewed by: kevans
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24090
Escape sequences like "\n" have to be escaped twice in examples in our
mdoc(7)-based manual pages in order to be displayed properly. The problem
is that otherwise they are interpreted by mdoc(7), which results in:
printf("parent: received '%s'0, buf);
being shown to the user instead of:
printf("parent: received '%s'\n", buf);
Approved by: bcr (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24056
I intend to document FreeBSD's ELF notes (see review D23982), but start
with a section documenting the format of the note section itself.
Sponsored by: The FreeBSD Foundation
The vectx API, computes the hash for verifying a file as it is read.
This avoids the overhead of reading files twice - once to verify, then
again to load.
For doing an install via loader, avoiding the need to rewind
large files is critical.
This API is only used for modules, kernel and mdimage as these are the
biggest files read by the loader.
The reduction in boot time depends on how expensive the I/O is
on any given platform. On a fast VM we see 6% improvement.
For install via loader the first file to be verified is likely to be the
kernel, so some of the prep work (finding manifest etc) done by
verify_file() needs to be factored so it can be reused for
vectx_open().
For missing or unrecognized fingerprint entries, we fail
in vectx_open() unless verifying is disabled.
Otherwise fingerprint check happens in vectx_close() and
since this API is only used for files which must be verified
(VE_MUST) we panic if we get an incorrect hash.
Reviewed by: imp,tsoome
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org//D23827
Summary:
Allow src.conf to override the inferred COMPAT_ARCH and COMPAT_CPUTYPE
variables, such that a different CPU target can be specified explicitly
for the general target vs the compat target.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D23992
The aim is to reduce the boilerplate needed today to define and
initialize global counters. Also add SI_SUB_COUNTER to the sysinit
ordering.
Reviewed by: kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23977
It does extremely useful things like execute sendmail and spew dubiously
accurate factoids.
From the feedback, it seems like it is an essential utility in a modern unix
and not at all a useless bikeshed. How do those Linux people live without it?
Reverts r358561.
These support outdated or obsolete ISA WAN (T1/E1) sync serial cards,
and these drivers haven't really been touched (other than in tree-wide
sweeps to keep them building) for 15+ years.
Related PCI devices ce and cp are still in the tree, with deprecation
proposed in D23928.
MFC after: 1 week
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Now that we no longer have GCC 4.2.1 in the tree and can assume FreeBSD
is being built with a C++11 compiler available, we can use BSDL dtc
unconditionally and retire the GPL dtc.
GPL dtc now has FreeBSD CI support via Cirrus-CI to help ensure it
continues to build/work on FreeBSD and is available in the ports tree
if needed.
The copy of (copyfree licensed) libfdt that we actually use is in
sys/contrib/libfdt so the extra copy under contrib/dtc/libfdt can be
removed along with the rest of the GPL dtc.
Reviewed by: kevans, ian, imp, manu, theraven
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23192
With the retirement of GCC 4.2.1 we can assume the host compiler supports
C++11, and can simplify the Clang and LLD defaults. Clang and lld are now
enabled by default everywhere, and are used as the bootstrap compiler and
linker for all targets except MIPS.
Sponsored by: The FreeBSD Foundation
LLVM's libunwind is used on all FreeBSD-supported CPU architectures and
is a required component.
Reviewed by: brooks (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23123
As described in Warner's email message[1] to the FreeBSD-arch mailing
list we have reached GCC 4.2.1's retirement date. At this time all
supported architectures either use in-tree Clang, or rely on external
toolchain (i.e., a contemporary GCC version from ports).
GCC 4.2.1 was released July 18, 2007 and was imported into FreeBSD later
that year, in r171825. GCC has served us well, but version 4.2.1 is
obsolete and not used by default on any architecture in FreeBSD. It
does not support modern C and does not support arm64 or RISC-V.
Thanks to everyone responsible for maintaining, updating, and testing
GCC in the FreeBSD base system over the years.
So long, and thanks for all the fish.
[1] https://lists.freebsd.org/pipermail/freebsd-arch/2020-January/019823.html
PR: 228919
Reviewed by: brooks, imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23124
Binutils has already been reduced to installing ld only on powerpc32
and as only on amd64. (Also objdump on every arch supported by binutils
2.17.50.) Although BINUTILS_BOOTSTRAP serves no purpose on MIPS there
is no reason to have a special case for it.
Sponsored by: The FreeBSD Foundation
Make style.9 read as a current statement of C99 preferences, rather than a
description of ongoing changes to our preferred style. Alsu use the short
form "ISO C99" on the 2nd and later instances rather than repeating the
unwieldy `ISO/IEC 9899:1999 ("ISO C99")` each time.
Reviewed by: cem, imp, jhb, kib
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23648
Summary:
With COMPILER_FREEBSD_VERSION, we use a numeric value that we bump each
time we make a change that requires re-bootstrapping, but with the
linker variant, we instead take the entire part after "FreeBSD", as in
this example version output:
LLD 9.0.1 (FreeBSD c1a0a213378a458fbea1a5c77b315c7dce08fd05-1300006) (compatible with GNU linkers)
E.g., LINKER_FREEBSD_VERSION is currently being set to
"c1a0a213378a458fbea1a5c77b315c7dce08fd05-1300006". This means that
*any* new upstream lld version will cause re-bootstrapping.
We should only look at the numerical field we append after a dash
instead. This review attempts to make it so.
The only thing I am not happy about is the post-processing of awk output
in Makefile.inc1. I notice that our awk does not have gensub(), so it
can't substitute a numbered sub-regex with \1, \2, etc. Suggestions
welcome. :)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23691
environ(7) was in AT&T Version 7
ac(8): Add a HISTORY section
sa(8): Add a HISTORY section
sqrt(3): Add the actual sqrt function to the HISTORY section
Obtained from: OpenBSD
Submitted by: gbergling@gmail.com
Approved by: bcr@(mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23693
ACPI Control Method Batteries have a _BIF and/or _BIX object which
provide static properties of the battery. FreeBSD acpi_cmbat module
supported _BIF object only, which was deprecated as of ACPI 4.0.
_BIX is an extended version of _BIF defined in ACPI 4.0 or later.
As of writing, _BIX has two revisions. One is in ACPI 4.0 (rev.0) and
another is in ACPI 6.0 (rev.1). It seems that hardware vendors still
stick to _BIF only or _BIX rev.0 + _BIF for the maximum compatibility.
Microsoft requires _BIX rev.0 for Windows machines, so there are some
laptop machines with _BIX rev.0 only. In this case, FreeBSD does not
recognize the battery information.
After this change, the acpi_cmbat module gets battery information from
_BIX or _BIF object and internally uses _BIX rev.1 data structure as
the primary information store in the kernel. ACPIIO_BATT_GET_BI[FX]
returns an acpi_bi[fx] structure built by using information obtained
from a _BIF or a _BIX object found on the system. The revision number
field can be used to check which field is available. The acpiconf(8)
utility will show additional information if _BIX is available.
Although ABIs of ACPIIO_BATT_* were changed, the existing APIs for
userland utilities are not changed and the backward-compatible ABIs
are provided. This means that older versions of acpiconf(8) can also
work with the new kernel. The (union acpi_battery_ioctl_arg) was
padded to 256 byte long to avoid another ABI change in the future.
A _BIX object with its revision number >1 will be treated as
compatible with the rev.1 _BIX format.
Reviewed by: takawata
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23728
Japanese keyboards traditionally use 0x5c for
both Japanese yen sign key and backslash key.
While a Japanese yen sign is depicted on the keytop,
most of Japanese expect that the scan code 0x7d gives
a backslash (0x5c), not a Japanese yen sign (0xa5).
This is because JIS X 0201 encoding (aka ISO/IEC 646-JA,
an extended version of ASCII which is very popular
in Japan) has Japanese yen sign at 0x5c and
no backslash. On the other hand, ISO/IEC 8859-1
has Japanese yen sign at 0xa5. This difference has
caused a confusion after Unicode became popular since
ISO/IEC 10646 adopted 8859-1 for the plane 0.
MFC after: 1 week
Key and cookie management typically wants to
avoid information leaks by explicitly zeroing
before free. This routine simplifies that by
permitting consumers to do so without carrying
the size around.
Reviewed by: jeff@, jhb@
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D22790
The function allows to peek at the thread exit status and even see
return value, without joining (and thus finally destroying) the target
thread.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation (kib)
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D23676
Support for NO_CTF, NO_DEBUG_FILES, NO_INSTALLLIB, NO_MAN, NO_PROFILE,
and NO_WARNS as deprecated in 2014 with a warning added for each one
found. Turn these into error in preperation for removal of compatability
support before FreeBSD 13.
This was previously committed in r354909 and reverted in r355011 due to
unforseen impacts on ports. I've since corrected all amd64 and i386
ports reported in prior runs as well as instance of these variables I
found via grep.
It was saved from the initial purge of drivers in fcp-101 due to being
the onboard Ethernet device on a number of sparc64 machines. Now that
sparc64 is gone, it serves little purpose (PCI cards exist, but are rare
and are unlikely to have been deployed outside Sun systems).
MFC after: 3 days
As explained in the comment; GOOGLETEST cannot currently be compiled on any
mips variant at the moment due to the cross toolchain seemingly using the
wrong spec and not pulling in libgcc. We'll be fine when llvm 10 lands, at
which point this should be reverted most expeditiously.
libssp_nonshared.a defines one symbol, __stack_chk_fail_local. This
is used only on i386 and powerpc; other archs emit calls directly to
__stack_chk_fail. Simplify linking on other archs by omitting it.
PR: 242941 [exp-run]
simple_httpd was granted a reprieve from the picobsd removal based on having
some reported user; it turns out this user isn't actually using the version
in base and merging their changes would be difficult at this point, so the
version in base will simply continue to rot. Retire it now, it may make a
comeback to ports with the improved version.
No notice issued because its current visibility has only been for ~3
months, and a notice has been previously issued about picobsd removal.
This simplifies the driver's rx fast path as well as the bookkeeping
code that tracks various rx buffer sizes and layouts.
MFC after: 1 week
Sponsored by: Chelsio Communications
The ports framework recently grew support for installing dependencies with
a dedicated target called "install-missing-packages". Let's retire the
carefully constructed one-liner that was used for getting dependencies so
far and use the official ports target instead.
Reviewed by: bcr
Approved by: bcr (mentor)
Differential Revision: https://reviews.freebsd.org/D23485
"*-out" is a complex way of phrasing the fact, and it causes
confusion for people.
Submitted by: debdrup
Approved by: bcr (mentor)
Differential Revision: https://reviews.freebsd.org/D23482
The Parallel Port SCSI adapter was interesting for 100MB ZIP drives, but is no
longer used or maintained. Remove it from the tree.
The Parallel Port microsequencer (microseq.9) is now mostly unused in the tree,
but remains. PPI still refrences it, but doesn't use its full functionality.
Relnotes: Yes
Reviewed by: rgrimes@, Ihor Antonov
Discussed on: arch@
Differential Revision: https://reviews.freebsd.org/D23389
This driver has seen no real changes for almost 20 years. It's for
hardware that's 25 years old. It has no reports of active use, nor
has it been seen in the NYCBug dmesg database at all. Schedule
its removal for 13.0.
Reviewed by: rgrimes@ (earlier version)
Relnote: Yes
MFC After: 3 days
Differential Revision: https://reviews.freebsd.org/D23403
If package-level control is present, we default to using it. Per-core
software control may be enabled by setting the machdep.hwpstate_pkg_ctrl
tunable to "0" in loader.conf(5).
Disable new clang 10.0.0 warnings about misleading indentation in flex.
As this is contributed code with very messy indentation, which will
almost certainly never be upgraded, just disable the warning.
MFC after: 3 days
Work around two -Werror warning issues in googletest, which have been
solved upstream in the mean time.
The first issue is because one of googletest's generated headers contain
classes with a user-declared copy assignment operator, but rely on the
generation by the compiler of an implicit copy constructor, which is now
deprecated:
/usr/obj/usr/src/amd64.amd64/tmp/usr/include/private/gtest/internal/gtest-param-util-generated.h:5284:8: error: definition of implicit copy constructor for 'CartesianProductHolder3<testing::internal::ParamGenerator<bool>, testing::internal::ValueArray3<int, int, int>, testing::internal::ValueArray4<cache_mode, cache_mode, cache_mode, cache_mode> >' is deprecated because it has a user-declared copy assignment operator [-Werror,-Wdeprecated-copy]
void operator=(const CartesianProductHolder3& other);
^
/usr/obj/usr/src/amd64.amd64/tmp/usr/include/private/gtest/gtest-param-test.h:1277:10: note: in implicit copy constructor for 'testing::internal::CartesianProductHolder3<testing::internal::ParamGenerator<bool>, testing::internal::ValueArray3<int, int, int>, testing::internal::ValueArray4<cache_mode, cache_mode, cache_mode, cache_mode> >' first required here
return internal::CartesianProductHolder3<Generator1, Generator2, Generator3>(
^
/usr/src/tests/sys/fs/fusefs/io.cc:534:2: note: in instantiation of function template specialization 'testing::Combine<testing::internal::ParamGenerator<bool>, testing::internal::ValueArray3<int, int, int>, testing::internal::ValueArray4<cache_mode, cache_mode, cache_mode, cache_mode> >' requested here
Combine(Bool(), /* async read */
^
For now, silence the warning using -Wno-deprecated-copy.
The second issue is because one of the googlemock test programs attempts
to use "unsigned wchar_t" and "signed wchar_t", which are non-standard
and at best, hazily defined:
contrib/googletest/googlemock/test/gmock-actions_test.cc:111:37: error: 'wchar_t' cannot be signed or unsigned [-Wsigned-unsigned-wchar]
EXPECT_EQ(0U, BuiltInDefaultValue<unsigned wchar_t>::Get());
^
contrib/googletest/googlemock/test/gmock-actions_test.cc:112:36: error: 'wchar_t' cannot be signed or unsigned [-Wsigned-unsigned-wchar]
EXPECT_EQ(0, BuiltInDefaultValue<signed wchar_t>::Get());
^
For now, silence the warning using -Wno-signed-unsigned-wchar.
MFC after: 3 days
solved upstream in the mean time.
The first issue is because one of googletest's generated headers contain
classes with a user-declared copy assignment operator, but rely on the
generation by the compiler of an implicit copy constructor, which is now
deprecated:
/usr/obj/usr/src/amd64.amd64/tmp/usr/include/private/gtest/internal/gtest-param-util-generated.h:5284:8: error: definition of implicit copy constructor for 'CartesianProductHolder3<testing::internal::ParamGenerator<bool>, testing::internal::ValueArray3<int, int, int>, testing::internal::ValueArray4<cache_mode, cache_mode, cache_mode, cache_mode> >' is deprecated because it has a user-declared copy assignment operator [-Werror,-Wdeprecated-copy]
void operator=(const CartesianProductHolder3& other);
^
/usr/obj/usr/src/amd64.amd64/tmp/usr/include/private/gtest/gtest-param-test.h:1277:10: note: in implicit copy constructor for 'testing::internal::CartesianProductHolder3<testing::internal::ParamGenerator<bool>, testing::internal::ValueArray3<int, int, int>, testing::internal::ValueArray4<cache_mode, cache_mode, cache_mode, cache_mode> >' first required here
return internal::CartesianProductHolder3<Generator1, Generator2, Generator3>(
^
/usr/src/tests/sys/fs/fusefs/io.cc:534:2: note: in instantiation of function template specialization 'testing::Combine<testing::internal::ParamGenerator<bool>, testing::internal::ValueArray3<int, int, int>, testing::internal::ValueArray4<cache_mode, cache_mode, cache_mode, cache_mode> >' requested here
Combine(Bool(), /* async read */
^
For now, silence the warning using -Wno-deprecated-copy.
The second issue is because one of the googlemock test programs attempts
to use "unsigned wchar_t" and "signed wchar_t", which are non-standard
and at best, hazily defined:
contrib/googletest/googlemock/test/gmock-actions_test.cc:111:37: error: 'wchar_t' cannot be signed or unsigned [-Wsigned-unsigned-wchar]
EXPECT_EQ(0U, BuiltInDefaultValue<unsigned wchar_t>::Get());
^
contrib/googletest/googlemock/test/gmock-actions_test.cc:112:36: error: 'wchar_t' cannot be signed or unsigned [-Wsigned-unsigned-wchar]
EXPECT_EQ(0, BuiltInDefaultValue<signed wchar_t>::Get());
^
For now, silence the warning using -Wno-signed-unsigned-wchar.
MFC after: 3 days
Add a sysctl knob to allow users to re-enable it, and document the knob and
default in cpufreq.4. (While here, add a few unrelated updates to
cpufreq.4.)
It seems that the register value in some hardware simply reflects the
configured P-state. This results in an inadvertent and unintended outcome
where the P-state can only walk down, and then the driver becomes "stuck" in
the slowest possible P-state.
The Linux driver never consults this register, so that's some evidence that
ignoring the contents are relatively harmless.
PR: 234733
Reported by: sigsys AT gmail.com, Erich Dollanksy <freebsd.ed.lists AT
sumeritec.com>
After r355784 the td_oncpu field is no longer synchronized by the thread
lock, so the stack capture interrupt cannot be delievered precisely.
Fix this using a loop which drops the thread lock and restarts if the
wrong thread was sampled from the stack capture interrupt handler.
Change the implementation to use a regular interrupt instead of an NMI.
Now that we drop the thread lock, there is no advantage to the latter.
Simplify the KPIs. Remove stack_save_td_running() and add a return
value to stack_save_td(). On platforms that do not support stack
capture of running threads, stack_save_td() returns EOPNOTSUPP. If the
target thread is running in user mode, stack_save_td() returns EBUSY.
Reviewed by: kib
Reported by: mjg, pho
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23355
The device list hasn't aged well. All these devices are over a decade old. umass
supports thunb drives almost universally, and the list is too long to try to
list here.
Remove some obsolete advice as well. This isn't the place to talk about how to
create FAT filesystems, nor now to mount them. The only advice that's still
useful is the rescanning of a multi-slot flash adapater.
MFC After: 3 days
This should fix linker errors when building with clang+lld.
After this change the lib32 compat libraries are now buildt with
-mhard-float instead of -msoft-float
Reviewed By: brooks, jhb
Differential Revision: https://reviews.freebsd.org/D23229
ng_nat implements NAT for IPv4 traffic only. When connected to an
ng_ether node it erroneously handled IPv6 packets as well.
This change is not sufficient: ng_nat does not do any validation of IP
packets in this mode, even though they have not yet passed through
ip_input().
PR: 243096
Reported by: Robert James Hernandez <rob@sarcasticadmin.com>
Reviewed by: julian
Differential Revision: https://reviews.freebsd.org/D23080
Intel Speed Shift is Intel's technology to control frequency in hardware,
with hints from software.
Let's get a working version of this in the tree and we can refine it from
here.
Submitted by: bwidawsk, scottph
Reviewed by: bcr (manpages), myself
Discussed with: jhb, kib (earlier versions)
With feedback from: Greg V, gallatin, freebsdnewbie AT freenet.de
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D18028
/etc/termcap is a symlink to /usr/share/misc/termcap, which is in the
runtime package. Tag the symlink with the same package so that it is
handled correctly on pkgbase-installed/updated systems.
Sponsored by: The FreeBSD Foundation
and will slowly transition from /usr/local/man to it. To reflect this remove
the documentation of the manpages being an exception in the layout of /usr/local
Reported by: Dan Nelson <dnelson_1901@yahoo.com> (via IRC)
MFC after: 3 days
x86 needs bootstrap GNU as for assembling a few files, and powerpc needs
GNU ld.bfd for linking 32-bit objects. All other targets either fully
use in-tree Clang and lld, or rely on external toolchain.
Sponsored by: The FreeBSD Foundation
dma(8) depends on OpenSSL unconditionally.
Reported by: Michael Dexter's Build Options Survey run
MFC after: 1 weeks
Sponsored by: The FreeBSD Foundation
Filemon will add the ability to ignore the cookie if the installed file is
missing. Without filemon that's not possible though so if the cookie is present
an the command unchanged then the install wouldn't run.
Sponsored by: DellEMC
MFC after: 2 weeks
Most of the gpio controller cannot configure or get the configuration
of the pin muxing as it's usually handled in the pinctrl driver.
But they can know what is the pinmuxing driver either because they are
child of it or via the gpio-range property.
Add some new methods to fdt_pinctrl that a pin controller can implement.
Some methods are :
fdt_pinctrl_is_gpio: Use to know if the pin in the gpio mode
fdt_pinctrl_set_flags: Set the flags of the pin (pullup/pulldown etc ...)
fdt_pinctrl_get_flags: Get the flags of the pin (pullup/pulldown etc ...)
The defaults method returns EOPNOTSUPP.
Reviewed by: ian, bcr (manpages)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D23093
Profiling library archives are part of the development environment; they
don't need to be in separate -profile packages.
(In fact we can probably just eliminate the _p.a archives assuming that
profiling will be done using hwpmc etc., but that is a change for later.)
Discussed with: bapt, manu
Sponsored by: The FreeBSD Foundation
