Commit Graph

2040 Commits

Author SHA1 Message Date
Warner Losh
95b56c0eb8 Use a macro to create the names for the library path names. This will
allow later substitution at run time instead of compile time of the
environment variable name prefix.

Differential Review: https://reviews.freebsd.org/D2718
2015-12-27 23:04:12 +00:00
Ed Maste
18010b98c2 rtld: remove old XXX comment missed in r35529
Sponsored by:	The FreeBSD Foundation
2015-12-24 18:53:17 +00:00
Ruslan Bukin
4b1859c0e9 Add support for RISC-V architecture.
Reviewed by:	andrew, kib
Sponsored by:	DARPA, AFRL
Sponsored by:	HEIF5
Differential Revision:	https://reviews.freebsd.org/D4679
2015-12-24 15:47:51 +00:00
Ed Maste
66963b3cef rtld: Use common NT_FREEBSD_* note types introduced in r291909
Sponsored by:	The FreeBSD Foundation
2015-12-21 22:40:29 +00:00
Warner Losh
d1e1c4de15 Use variable names that aren't as prone to dyslexic confusion.
Suggested by: jmallet@
2015-12-18 05:45:49 +00:00
Bryan Drewery
eacae6dc66 Fix LDADD/DPADD that should be LIBADD.
Sponsored by:	EMC / Isilon Storage Division
2015-12-04 03:17:47 +00:00
Nathan Whitehorn
4cce0e9868 Follow-on to r291666: use -ffreestanding instead of -fno-builtin.
Requested by:	kib
2015-12-03 21:25:59 +00:00
Nathan Whitehorn
29ba9b6124 Provide support for ELFv2 userland if using a newer compiler (recent clang
or gcc) and binutils >= 2.24. Not enabled by default.
2015-12-03 00:10:57 +00:00
Nathan Whitehorn
50ea11fc87 Fix build on GCC 5.2 where, at least on PPC64, the compiler would "optimize"
the malloc() + memset() in the local implementation of calloc() into a call
to calloc(), helpfully turning it into an infinite loop. Clean up some
unneeded flags on PPC64 while here.

MFC after:	1 month
2015-12-03 00:06:59 +00:00
Bryan Drewery
056b7d85a4 Fix build after r291620.
"don't know how to make /Versions.def. Stop"

This was trying to define a target in bsd.symver.mk based on LIBCDIR which was
not yet defined.  Switching the order of inclusion of bsd.prog.mk and
bsd.symver.mk fixes it and seems fine.

Pointyhat to:	bdrewery
Sponsored by:	EMC / Isilon Storage Division
2015-12-01 22:50:32 +00:00
Bryan Drewery
3c89d6b0e3 Don't override LIB*DIR variables from src.libnames.mk.
In some cases switch to the LIB*SRCDIR value.

These recently were defined in r291327 and r291619.

Sponsored by:	EMC / Isilon Storage Division
2015-12-01 22:20:04 +00:00
Bryan Drewery
b1f92fa229 META MODE: Update dependencies with 'the-lot' and add missing directories.
This is not properly respecting WITHOUT or ARCH dependencies in target/.
Doing so requires a massive effort to rework targets/ to do so.  A
better approach will be to either include the SUBDIR Makefiles directly
and map to DIRDEPS or just dynamically lookup the SUBDIR.  These lose
the benefit of having a userland/lib, userland/libexec, etc, though and
results in a massive package.  The current implementation of targets/ is
very unmaintainable.

Currently rescue/rescue and sys/modules are still not connected.

Sponsored by:	EMC / Isilon Storage Division
2015-12-01 05:23:19 +00:00
Bryan Drewery
cf990407e1 Update dependencies after r291406 added libelf to libkvm.
Unfortunately filemon/meta mode tracks all indirect dependencies here
since ld(1) is reading libelf when linking in libkvm.  Churn would be
reduced if this was able to be limited to direct dependencies.

Sponsored by:	EMC / Isilon Storage Division
2015-12-01 05:18:48 +00:00
Bryan Drewery
7fdd45b091 Use LIBEXECDIR for /usr/libexec.
MFC after:	1 week
Sponsored by:	EMC / Isilon Storage Division
2015-11-26 01:14:40 +00:00
Bryan Drewery
93e779a26c META MODE: These need object directories to handle staging.
Sponsored by:	EMC / Isilon Storage Division
2015-11-26 01:14:27 +00:00
Bryan Drewery
b791fbe630 META MODE: Don't create .meta files when symlinking sources into the obj directory.
Tracking these leads to situations where meta mode will consider the
file to be out of date if /bin/sh or /bin/ln are newer than the source
file.  There's no reason for meta mode to do this as make is already
handling the rebuild dependency fine.

Sponsored by:	EMC / Isilon Storage Division
2015-11-25 19:44:43 +00:00
Bryan Drewery
6a270e17f3 Remove unneeded libutil dependency for sendmail.
It included libutil.h for setproctitle(3), which was moved from libutil to libc
in r65353 in 2000.

Reviewed by:	gshapiro [sendmail change]
Sponsored by:	EMC / Isilon Storage Division
Differential Revision:	https://reviews.freebsd.org/D4261
2015-11-24 04:19:55 +00:00
Warner Losh
3deca56f3f Rather than using the #define for path names, indirect through a char *
variable that could change for different executable types detected.
2015-10-31 04:39:55 +00:00
Warner Losh
b2a4014cbb Move all the paths into a new path.h to centralize them. 2015-10-31 04:39:28 +00:00
Bryan Drewery
7eda8fb9ad Add Makefile.depend 2015-10-27 01:24:57 +00:00
Konstantin Belousov
bd56d410c4 Allow PT_NOTES segments to be located anywhere in the executable
image.

The dynamic linker still requires that program headers of the
executable or dso are mapped by a PT_LOAD segment.

Reviewed by:	emaste, jhb
Sponsored by:	The FreeBSD Foundation
MFC after:	2 weeks
Differential revision:	https://reviews.freebsd.org/D3871
2015-10-14 18:29:21 +00:00
Enji Cooper
b2d48be1bc Refactor the test/ Makefiles after recent changes to bsd.test.mk (r289158) and
netbsd-tests.test.mk (r289151)

- Eliminate explicit OBJTOP/SRCTOP setting
- Convert all ad hoc NetBSD test integration over to netbsd-tests.test.mk
- Remove unnecessary TESTSDIR setting
- Use SRCTOP where possible for clarity

MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Divison
2015-10-12 08:16:03 +00:00
Baptiste Daroussin
f98f68bd50 Use existing CONFDIR instead of adding a new CONFIGDIR
Reported by:	jbeich
2015-10-11 19:25:39 +00:00
Baptiste Daroussin
e56bad4a94 Update Dragonfly Mail Agent to v0.10 2015-10-10 23:31:47 +00:00
Baptiste Daroussin
2c9976e37e Install bsd.confs.mk
Rename ETCDIR into CONFIGDIR to avoid conflicts with the ports tree
2015-10-10 10:48:09 +00:00
Baptiste Daroussin
4b3d93d38a Rename the dma directory into dmagent to avoid collision on unclean oject
directory where an old dma binary can remain
2015-10-09 23:19:29 +00:00
Baptiste Daroussin
8f008e6907 Add missing Makefile 2015-10-09 22:10:54 +00:00
Baptiste Daroussin
855ff27c8c Move all the dma(8) components into one single directory
Simplifying maintainance and options (only one place to deal with MK_DMAGENT)

This also makes packaging base less intrusive by getting a single point where
to add tags.
2015-10-09 22:09:44 +00:00
Alexander Kabaev
b3ac02ca48 Remove some trailing space. 2015-10-09 18:39:52 +00:00
Konstantin Belousov
96cdb0ab9d Annotate arm userspace assembler sources stating their tolerance to
the non-executable stack.

Reviewed by:	andrew
Sponsored by:	The FreeBSD Foundation
2015-09-29 16:09:58 +00:00
Bryan Drewery
ec766071e3 META_MODE: Remove DEP_MACHINE from Makefile.depend files.
This has not been needed since r246865 in projects/bmake.

Sponsored by:	EMC / Isilon Storage Division
2015-09-25 19:44:01 +00:00
Bryan Drewery
54c7d75a06 META_MODE: Remove DEP_RELDIR from Makefile.depend files.
This has not been needed since r284171 in projects/bmake.

Sponsored by:	EMC / Isilon Storage Division
2015-09-25 19:26:08 +00:00
Bryan Drewery
1508ab98e5 META_MODE: No need to fix the link in this case.
The exists(${DESTDIR}...) check runs with DESTDIR being blank.  When the
target runs it does have DESTDIR=${STAGE_OBJTOP} via bsd.sys.mk.  This
results in the first execution warning that the symlink is missing.  The
second run does run fine.  However, this chflags is not needed at all
for META_MODE/STAGING since we never had this path being a schg file
while using META_MODE.

Sponsored by:	EMC / Isilon Storage Division
2015-09-18 23:12:38 +00:00
Andrew Turner
7c81294224 Fix how we place each objects thread local data. The code used was based
on the Variant II code, however arm64 uses Variant I. The former placed the
thread pointer after the data, pointing at the thread control block, while
the latter places these before said data.

Because of this we need to use the size of the previous entry to calculate
where to place the current entry. We also need to reserve 16 bytes at the
start for the thread control block.

This also fixes the value of TLS_TCB_SIZE to be correct. This is the size
of two unsigned longs, i.e. 2 * 8 bytes.

While here remove the bogus adjustment of the pointer in the
R_AARCH64_TLS_TPREL64 case. It should be the offset of the data relative
to the thread pointer, including the thread control block.

Sponsored by:	ABT Systems Ltd
2015-09-01 15:57:03 +00:00
Andrew Turner
878165d2ef Ensure we use calculate_first_tls_offset, even if the main program doesn't
have TLS program header. This is needed on architectures with Variant I
tls, that is arm, arm64, mips, and powerpc. These place the thread control
block at the start of the buffer and, without this, this data may be
trashed.

This appears to not be an issue on mips or powerpc as they include a second
adjustment to move the thread local data, however this is on arm64 (with a
future change to fix placing this data), and should be on arm. I am unable
to trigger this on arm, even after changing the code to move the data
around to make it more likely to be hit. This is most likely because my
tests didn't use the variable in offset 0.

Reviewed by:	kib
MFC after:	1 week
Sponsored by:	ABT Systems Ltd
2015-09-01 15:43:56 +00:00
Xin LI
34a8cde09d Don't assign 'ptr' without using it.
Reported by:	clang static analyzer
MFC after:	2 weeks
2015-08-30 08:38:59 +00:00
Marcel Moolenaar
d1a0d267b7 Upgrade libxo to 0.4.5.
Local changes incorporated by 0.4.5: r284340
Local changes retained: r276260, r282117

Obtained from:	https://github.com/Juniper/libxo
2015-08-24 16:26:20 +00:00
Eric van Gyzen
ddab052725 Disable SSE in libthr
Clang emits SSE instructions on amd64 in the common path of
pthread_mutex_unlock.  If the thread does not otherwise use SSE,
this usage incurs a context-switch of the FPU/SSE state, which
reduces the performance of multiple real-world applications by a
non-trivial amount (3-5% in one application).

Instead of this change, I experimented with eagerly switching the
FPU state at context-switch time.  This did not help.  Most of the
cost seems to be in the read/write of memory--as kib@ stated--and
not in the #NM handling.  I tested on machines with and without
XSAVEOPT.

One counter-argument to this change is that most applications already
use SIMD, and the number of applications and amount of SIMD usage
are only increasing.  This is absolutely true.  I agree that--in
general and in principle--this change is in the wrong direction.
However, there are applications that do not use enough SSE to offset
the extra context-switch cost.  SSE does not provide a clear benefit
in the current libthr code with the current compiler, but it does
provide a clear loss in some cases.  Therefore, disabling SSE in
libthr is a non-loss for most, and a gain for some.

I refrained from disabling SSE in libc--as was suggested--because
I can't make the above argument for libc.  It provides a wide variety
of code; each case should be analyzed separately.

https://lists.freebsd.org/pipermail/freebsd-current/2015-March/055193.html

Suggestions from:	dim, jmg, rpaulo
Approved by:	kib (mentor)
MFC after:	2 weeks
Sponsored by:	Dell Inc.
2015-08-05 12:53:55 +00:00
Marcelo Araujo
033af09de1 Staticfy and constify some variables and clean up the code a bit to make it
more readable. No functional change.

Differential Revision:	D3166
Reviewed by:		kib
Sponsored by:		gandi.net
2015-07-28 02:32:40 +00:00
Andrew Turner
3cf00397ad Add on the addend when in the R_AARCH64_ABS64 and R_AARCH64_GLOB_DAT cases.
This fixes at least sshd, and some of the boehm-gc tests.

Sponsored by:	ABT Systems Ltd
2015-07-05 11:42:01 +00:00
Mariusz Zaborski
c36e54bb32 Let the nv.h and dnv.h includes be only in sys directory.
Change consumers to include those files from sys.
Add duplicated files to ObsoleteFiles.

Approved by:	pjd (mentor)
2015-07-02 21:58:10 +00:00
Andrew Turner
aeb8eeb590 Save & restore the floating-pont argument registers before calling
_rtld_bind. The compiler may generate code using these registers and not
save them. Unfortunately, as we make use of libc, we are unable to disallow
rtld from using floating-point register without also doing the same for the
parts of libc we use, or by limiting what _rtld_bind is able to call.

Obtained from:	ABT Systems Ltd
Sponsored by:	The FReeBSD Foundation
2015-07-02 14:00:07 +00:00
Andrew Turner
ff8a3cb6e2 Also save x8. It may be passed into a function as the indirect result
location pointer when the return value doesn't fit in a register, e.g. when
returning a struct.

Obtained from:	ABT Systems Ltd
Sponsored by:	The FreeBSD Foundation
2015-06-23 10:32:26 +00:00
Warren Block
d33daab934 Call /etc/crontab the "system crontab", not "root's crontab". While
here, fix some other wording issues

PR:		201048
Submitted by:	teksimian@gmail.com
MFC after:	1 week
2015-06-22 20:24:59 +00:00
Andrew Turner
65706c12b2 Add a workaround to correctly align the stack before calling into C code.
When enough time has passed for users to update their userland the kernel
fix will be applied. This will change the ABI to have x0 point to the args
and sp be correctly aligned.

It is expected this compatibility code can be removed when the kernel and
qemu usermode emulation have both been updated for the new ABI.

This fixes clang failures, and most likely other crashes.

Obtained from:	ABT Systems Ltd
Sponsored by:	The FreeBSD Foundation
2015-06-22 19:43:08 +00:00
Simon J. Gerraty
2ef6d5a7b9 new depends 2015-06-16 23:37:19 +00:00
Simon J. Gerraty
c55c82f669 Needs libxo 2015-06-14 03:31:23 +00:00
Simon J. Gerraty
ccfb965433 Add META_MODE support.
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.

Still need to add real targets under targets/ to build packages.

Differential Revision:       D2796
Reviewed by: brooks imp
2015-06-13 19:20:56 +00:00
Simon J. Gerraty
5b381db8cc Remove NO_OBJ
For meta mode we will want objdirs.

Differential Revision:	D2748
Reviewed by:	brooks imp
2015-06-11 04:22:17 +00:00
Marcel Moolenaar
2f0ae7721d Fix build after converting ls(1) to use libxo(3). 2015-06-10 13:17:41 +00:00