sleep, and perform the page allocations with VM_ALLOC_SYSTEM
class. Previously, the allocation was also allowed to completely drain
the reserve of the free pages, being translated to VM_ALLOC_INTERRUPT
request class for vm_page_alloc() and similar functions.
Allow the caller of malloc* to request the 'deep drain' semantic by
providing M_USE_RESERVE flag, now translated to VM_ALLOC_INTERRUPT
class. Previously, it resulted in less aggressive VM_ALLOC_SYSTEM
allocation class.
Centralize the translation of the M_* malloc(9) flags in the single
inline function malloc2vm_flags().
Discussion started by: "Sears, Steven" <Steven.Sears@netapp.com>
Reviewed by: alc, mdf (previous version)
Tested by: pho (previous version)
MFC after: 2 weeks
hypervisor. Apparently, hypervisors failed to filter out 'Standard
Extended Features' report from CPUID, but deliver #gp when
corresponding bit in %cr4 is toggled.
This shall be reconsidered later, after hypervisors correct the bug.
Reported and tested by: joel
Reviewed by: avg
MFC after: 2 weeks
%gs, when supported. Note that WRFSBASE and WRGSBASE are not very
useful on FreeBSD right now, because a return from the kernel mode to
userspace reloads the bases specified by the sysarch(2) syscall, most
likely.
Enable the Supervisor Mode Execution Prevention (SMEP) when
supported. Since the loader(8) performs hand-off to the kernel with
the page tables which contradict the SMEP, postpone enabling the SMEP
on BSP until pmap switched for the proper kernel tables.
Debugged with the help from: avg
Tested by: avg, Michael Moll <kvedulv@kvedulv.de>
MFC after: 1 month
introduced with the IvyBridge CPUs. Provide the definitions for new
bits in CR3 and CR4 registers.
Tested by: avg, Michael Moll <kvedulv@kvedulv.de>
MFC after: 2 weeks
AMD BKDG for CPU families 10h and later requires that the memory
mapped config is always read into or written from al/ax/eax register.
Discussed with: kib, alc
Reviewed by: kib (earlier version)
MFC after: 25 days
instruction loads/stores at its will.
The macro __compiler_membar() is currently supported for both gcc and
clang, but kernel compilation will fail otherwise.
Reviewed by: bde, kib
Discussed with: dim, theraven
MFC after: 2 weeks
r234247.
Use, instead, the static intializer introduced in r239923 for x86 and
sparc64 intr_cpus, unwinding the code to the initial version.
Reviewed by: marius
bits under #ifdef _KERNEL but leave definitions for various structures
defined by standards ($PIR table, SMAP entries, etc.) available to
userland.
- Consolidate duplicate SMBIOS table structure definitions in ipmi(4)
and smbios(4) in <machine/pc/bios.h> and make them available to
userland.
MFC after: 2 weeks
pmap_unmapdev()'s own direct efforts to destroy the page table entries are
redundant, so eliminate them.
Don't set PTE_W on the page table entry in pmap_kenter{,_attr}() on MIPS.
Setting PTE_W on MIPS is inconsistent with the implementation of this
function on other architectures. Moreover, PTE_W should not be set, unless
the pmap's wired mapping count is incremented, which pmap_kenter{,_attr}()
doesn't do.
MFC after: 10 days
generator, found on IvyBridge and supposedly later CPUs, accessible
with RDRAND instruction.
From the Intel whitepapers and articles about Bull Mountain, it seems
that we do not need to perform post-processing of RDRAND results, like
AES-encryption of the data with random IV and keys, which was done for
Padlock. Intel claims that sanitization is performed in hardware.
Make both Padlock and Bull Mountain random generators support code
covered by kernel config options, for the benefit of people who prefer
minimal kernels. Also add the tunables to disable hardware generator
even if detected.
Reviewed by: markm, secteam (simon)
Tested by: bapt, Michael Moll <kvedulv@kvedulv.de>
MFC after: 3 weeks
comment describing them. Both the function names and the comment had grown
stale. Quite some time has passed since these pmap implementations last
used the page's hold count to track the number of valid mapping within a
page table page. Also, returning TRUE from pmap_unwire_ptp() rather than
_pmap_unwire_ptp() eliminates a few instructions from callers like
pmap_enter_quick_locked() where pmap_unwire_ptp()'s return value is used
directly by a conditional statement.
- Move mwlfw from {amd64,i386}/conf/NOTES to sys/conf/NOTES (mwl(4) is
already present in sys/conf/NOTES).
- Remove duplicate mwl(4) entries from {amd64,i386}/conf/NOTES.
- While here, add a description to the sfxge line in amd64/conf/NOTES.
reason for generated trap. The dump of basic signal information and 8
bytes of the faulting instruction are printed on the controlling
terminal of the process, if the machdep.uprintf_signal syscal is
enabled.
The print is the only practical way to debug traps from a.out
processes I am aware of. Because I have to reimplement it each time I
debug an issue with a.out support on amd64, commit the hack to main
tree.
MFC after: 1 week
in long mode which transfers control to 32bit code segment. Unbreak
the lcall $7,$0 implementation on amd64 by putting the 64bit user code
segment' selector into call gate, and execute the 64bit trampoline
which converts the return frame into 32bit format and switches back to
32bit mode for executing int $0x80 trampoline.
Note that all jumps over the hoops are performed in the user mode.
MFC after: 1 week
It is not listed in the boot sequence in the MP specification (1.4),
and it is explicitly ignored on modern CPUs. It was only ever required
when bootstrapping systems with external APICs (that is, SMP machines
with 486s), which FreeBSD has never supported (and never will).
While here, tidy some comments and remove some banal ones.
matches the algorithm in the MP specification (1.4). Previously we
were sending out the deassert INIT IPI immediately after the initial
INIT IPI was sent.
typical hypervisor does not implement access to the required MSR,
causing #GP on boot.
Reported and tested by: olgeni
PR: amd64/170388
MFC after: 3 days
PTE's PG_M and PG_RW bits but not the physical page frame. First,
only perform vm_page_dirty() on a managed vm_page when the PG_M bit is
being cleared. If the updated PTE continues to have PG_M set, then
there is no requirement to perform vm_page_dirty(). Second, flush the
mapping from the TLB when PG_M alone is cleared, not just when PG_M
and PG_RW are cleared. Otherwise, a stale TLB entry may stop PG_M
from being set again on the next store to the virtual page. However,
since the vm_page's dirty field already shows the physical page as
being dirty, no actual harm comes from the PG_M bit not being set.
Nonetheless, it is potentially confusing to someone expecting to see
the PTE change after a store to the virtual page.
stopped threads. Implementation assumes that the thread's FPU context
is spilled into the PCB due to stop. This is mostly true, except when
FPU state for the thread is not initialized. Then the requests operate
on the garbage state which is currently left in the PCB, causing
confusion.
The situation is indeed observed after a signal delivery and before
#NM fault on execution of any FPU instruction in the signal handler,
since sendsig(9) drops FPU state for current thread, clearing
PCB_FPUINITDONE. When inspecting context state for the signal handler,
debugger sees the FPU state of the main program context instead of the
clear state supposed to be provided to handler.
Fix this by forcing clean FPU state in PCB user FPU save area by
performing getfpuregs(9) before accessing user FPU save area in
ptrace_machdep.c.
Note: this change will be merged to i386 kernel as well, where it is
much more important, since e.g. gdb on i386 uses PT_I386_GETXMMREGS to
inspect FPU context on CPUs that support SSE. Amd64 version of gdb
uses PT_GETFPREGS to inspect both 64 and 32 bit processes, which does
not exhibit the bug.
Reported by: bde
MFC after: 1 week
understands FPU hardware enough to catch SIGFPE and unmask exceptions
in control word, then it may as well properly handle return from
SIGFPE without causing an infinite loop of #MF exceptions due to
faulting instruction restart, when needed.
Clearing exceptions causes information loss for handlers which do
understand FPU hardware, and struct siginfo si_code member cannot be
considered adequate replacement for en_sw content due to translation.
Supposed reason for clearing the exceptions, which is IRQ13 handling
oddities, were never applicable to amd64.
Note: this change will be merged to i386 kernel as well, since we do
not support IRQ13 delivery of #MF notifications for some time.
Requested by: bde
MFC after: 1 week
amd64. It is implemented as __pure2 inline with non-volatile asm read
from pcpu, which allows a compiler to cache its results.
Convert most PCPU_GET(pcb) and curthread->td_pcb accesses into curpcb.
Note that __curthread() uses magic value 0 as an offsetof(struct pcpu,
pc_curthread). It seems to be done this way due to machine/pcpu.h
needs to be processed before sys/pcpu.h, because machine/pcpu.h
contributes machine-depended fields to the struct pcpu definition. As
result, machine/pcpu.h cannot use struct pcpu yet.
The __curpcb() also uses a magic constant instead of offsetof(struct
pcpu, pc_curpcb) for the same reason. The constants are now defined as
symbols and CTASSERTs are added to ensure that future KBI changes do
not break the code.
Requested and reviewed by: bde
MFC after: 3 weeks
occurs using the SSE math processor. Update comments describing the
handling of the exception status bits in coprocessors control words.
Remove GET_FPU_CW and GET_FPU_SW macros which were used only once.
Prefer to use curpcb to access pcb_save over the longer path of
referencing pcb through the thread structure.
Based on the submission by: Ed Alley <wea llnl gov>
PR: amd64/169927
Reviewed by: bde
MFC after: 3 weeks
