gzip(1). gdb doesn't understand these, but then again it didn't
understand compressed crashdumps either.
* Change a stray lseek() into a Lseek()
* Remove the extraneous prototype for log() which has apparently never
existed in FreeBSD's sources
Obtained from: NetBSD (partially)
MFC after: 2 weeks
COPTS towards the end of final CFLAGS so that it can be used to
override Makefile and other defaults. Using it in Makefiles risks
having options set using it clobbered when somebody uses it on the
command line.
Approved by: bde
where the headers should live, as the code references both "ip_fil.h" and
"netinet/ip_fil.h" (among others). As a consequence, put both
sys/contrib/ipfilter and sys/contrib/ipfilter/netinet to the include path
so either variant works.
PR: 29384
Pointed out by: Thomas.Quinot@Cuivre.FR.EU.ORG
Allow non-superuser to open, listen to, and send safe commands on the
routing socket. Superuser priviledge is required for all commands
but RTM_GET.
Lose `setuid root' bit of route(8).
Reviewed by: wollman, dd
At the times, restore(8) and rrestore(8) were the different
utilities. rrestore(8) was installed setuid `root', while
restore(8) with usual ownership and privileges. Later on,
on August 28, 1991 (what a coincidence!), rrestore(8) code
was merged with restore(8). The setgid `tty' bit then was
accidentally put.
default if the executable is named (called as) "mount_*", or can be
enabled with the -C option. This allows users to leave their old
fstab entires unchanged (modulo symlink'ing mdmfs to mount(md|mfs))
and have things behave the way they should (by emulating mount_mfs
silliness), while still allowing mdmfs to be used as a generic
make-an-md-and-mount-it type thing.
Right now, the only effects of this option is to set the mount-point
mode to 01777 as if "-p 1777" was given, and to complain about getting
command-line options that mount_mfs didn't take (e.g., -X, -L, et al).
The latter is mostly to try to catch operator errors.
Also implement -U, which turns on soft-updates. It's redundant (since
softdep is the default), but implement it anyway for compatibility.
bypass some extra anti-foot-shooting measures. Currently, its only
effect is to allow detaching a device while it's still open (e.g.,
mounted). This is useful for testing how the system reacts to a disk
suddenly going away, which can happen with some removeable media.
At this point, the force option is only checked on detach, so it
would've been possible to allow the option to be passed with the
MDIOCDETACH operation. This was not done to allow the possibility of
having the force flag influence other tests in the future, which may
not necessarily deal with detaching the device.
Reviewed by: sobomax
Approved by: phk
Avoid using parenthesis enclosure macros (.Pq and .Po/.Pc) with plain text.
Not only this slows down the mdoc(7) processing significantly, but it also
has an undesired (in this case) effect of disabling hyphenation within the
entire enclosed block.
into sadb_x_sa2_sequence from sadb_x_sa2_reserved3 in the sadb_x_sa2
structure. Also the output of setkey is changed. sequence number
of the sadb is replaced to the end of the output.
Obtained from: KAME
pointed out by bde:
- Ask for user confirmation before adjusting to a head/cylinder
boundary (only when running interactively), and separate this
adjustment from the automatic calculation of c/h/s parameters.
- In sanitize_partition, don't change any values in the slice until
we know that the automatic adjustment will succeed.
- When auto-adjusting, ignore unused slices and give an appropriate
error for other zero-size slices depending on the cause.
- Change dos() to do all of the c/h/s calculations for a whole slice;
this fixes a bug where the ending c/h/s of an unused slice was set
incorrectly.
- When changing the active slice, detect the currently active slice
number instead of always defaulting to slice 4.
- Call fflush(stdout) before calling fgets().
- Test for fgets() returning NULL so we don't loop on EOF.
Reviewed by: bde
1.) prefix all functions in the library with devstat_ (compatability
functions are available for all functions that were chaned in an
incompatible way, but are deprecated).
2.) Add a pointer to a kvm_t as the first argument to functions that
used to get their information via sysctl; they behave the same
as before when NULL is passed as this argument, otherwise, the
information is obtained via libkvm using the supplied handle.
3.) Add a new function, devstat_compute_statistics(), that is intended
to replace the old compute_stats() function. It offers more
statistics data, and has a more flexible interface.
libdevstat does now require libkvm; a library depedency is added, so
that libkvm only needs to be explicitely specified for statically linked
programs.
The library major version number is bumped.
Submitted by: Sergey A. Osokin <osa@freebsd.org.ru>, ken (3)
Reviewed by: ken
- Declare mtabhead as an extern in mounttab.h and define it only in
mounttab.c.
- Remove shared global `verbose' and instead pass it as a parameter.
- Remove the `mtabp' argument to read_mtab(). It served no purpose
whatsoever, although read_mtab() did use it as a temporary local
variable.
- Don't check for impossible conditions when parsing mounttab, and
do detect zero-length fields.
- Correctly test for strtoul() failures - just testing ERANGE is wrong.
- Include a field name in syslog errors, and avoid passing NULL to
a syslog %s field.
- Don't test if arrays are NULL.
- If there are duplicates when writing out mounttab, keep the last
entry instead of the first, as it will have a later timestamp.
- Fix a few formatting issues.
Update rpc.umntall and umount to match the mounttab interface changes.
information for any command line error, the actual error message
almost always (and sometimes irretrievably) lost scrolling off the top
of the screen. Now just print the error. Give ipfw(8) no arguments for
the old usage summary.
Thanks to Lyndon Nerenberg <lyndon@orthanc.ab.ca> for the patch and
PR, but I had already done this when ru pointed out the PR.
PR: bin/28729
Approved by: ru
MFC after: 1 week
immediately if a host specified by the -h flag cannot be parsed
instead of attempting to unmount all NFS filesystems, which was
bad.
Add a missing return statement at the end of checkname(); this
could result in a non-zero exit status in some cases even if the
unmount succeeded.
Group two separate NFS-related operations into one block to make
it more obvious that a variable (hostp) is not dereferenced when
uninitialised. Initialise it to NULL anyway to avoid a warning.
Pass in the read_mtab()'s bogus argument as NULL instead of messing
with a local variable to achieve the same effect. A later commit
will clean up this mounttab interface.
forever by default. This matches what mount_nfs did before revision
1.40, and it is the generally expected behaviour for NFS mounts.
Document the current defaults near the start of the man page and
mention the options that can be used to change them.
Discussed on: -hackers
to give up after one attempt unless a background mount is requested.
Background mounts would retry 10000 times (at least 7 days) before
giving up.
For some situations such as diskless terminals, an NFS filesystem
may be critical to the boot process, so neither the "try once" nor
background mounts are appropiate. To cater for this situation,
unbreak the -R (retry count) parameter so that it also works in
the non-background case. Interpret a zero retry count as "retry
forever".
The defaults are now "try once" for non-background mounts and "retry
forever" for background mounts; both can be overridden via -R.
Add a description of this behaviour to the manpage.
device search code i introduce nearly six years ago in rev 1.8. Bruce
suggested to rather use the device name of the root filesystem instead
which is certainly the most sensible default. Since there are many
possible cases for a root filesystem name (device with and without
slices, consider /dev/vinum/root even though it currently could not
work as such), there's some heuristic using a RE in order to find out
the canonical device name from the mounted name. This probably won't
quite fit for a NFS root (can't test that right now), but then,
there's hard to find a good default for those machines anyway. ;-)
This unbreaks the functionality of rev 1.2 i once broke in 1.8. :)
to use 0xffffffff (INADDR_NONE) as a netmask value. The fix
is to use inet_addr(3) which doesn't suffer from this problem.
PR: bin/28873
Also, while here, fixed the bug when netmask value was ignored
(RTF_HOST flag was set) if the "destination gateway netmask"
syntax is used, e.g. ``route add 1.2.3.4 127.1 255.255.255.255''.
The original code was certainly broken; it knows that whereto is
to be used for a sockaddr_in, so it should be declared as such.
To support multiple protocols, there is also a sockaddr_storage
struct that can be used; I don't think struct sockaddr is supposed
to be used anywhere other than for casts and pointers.
Submitted by: Ian Dowse <iedowse@maths.tcd.ie>
MFC after: 3 weeks
This one is strange and goes against my rusty compiler knowledge.
The global declaration
struct sockaddr whereto;
produces for both i386 && alpha:
.comm whereto,16,1
which means common storage, byte aligned. Ahem. I though structs
were supposed to be ALDOUBLE always? I mean, w/o pragma packed?
Later on, this address is coerced to:
to = (struct sockaddr_in *)&whereto;
Up until now, we've been fine on alpha because the address
just ended up aligned to a 4 byte boundary. Lately, though,
it end up as:
0000000120027b0f B whereto
And, tra la, you get unaligned access faults. The solution I picked, in
lieu of understanding what the compiler was doing, is to put whereto
as a union of a sockaddr and sockaddr_in. That's more formally correct
if somewhat awkward looking.
prematurely terminate the search for a usable disk. ENOENT is quite
normal in particulare now with the advent of devfs.
While being here, also remove /dev/wd0 and /dev/od0 from the list of
disks to search since we don't have them anymore.
MFC after: 1 week
backslash as nothing, treat it like a space so that adjacent lines
aren't glued together.
PR: 8479
Submitted by: Adrian Filipi-Martin <adrian@ubergeeks.com>
user runs with privilege, allowing the sending of icmp packets with
larger size (up to 48k, the default receive buffer size in ping),
which is useful for network driver development testing, as well
as experimentation with fragmentation.
Reviewed by: wpaul
ensure that we never proceed with the mount() syscall if the server
is replying from the wrong source address. Previously the userland
RPC call to the remote nfsd would succeed, but the kernel uses
connect() so it would not see the replies, resulting in a hung
mount.
NQNFS code is ancient, bug-ridden, and should probably be removed).
The wording here was very confusing; it was easy to get the impression
that NQNFS is an extension to NFSv3 when in fact it just uses some
NFSv3-like extensions on top of NFSv2. As witnessed by the mailing
lists and PRs, some people were reading the description and deciding
that NQNFS was what they wanted to use.
MFC after: 1 week
driver itself obviously won't configure such a disk, but the error
returned (EDOM) is more cryptic to the average user than it should be.
Also assert that the argument to -u is in fact a valid unit; don't
just accept any string to mean 0.
Approved by: phk
in revision 1.48. It is pretty valid and often feasible to use
a non-point-to-point interface as the gateway. One might, for
example, use this to route some hosts through an ARP on a local
interface, without having to assign an additional IP address:
Script started on Tue Jun 12 16:16:09 2001
# ifconfig rl0 inet
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.4.115 netmask 0xffffff00 broadcast 192.168.4.255
# netstat -arn -finet | grep -w rl0
192.168.4 link#1 UC 3 0 rl0 =>
192.168.4.65 0:d0:b7:16:9c:c6 UHLW 1 0 rl0 1197
# route add -net 192.168.100 -iface rl0
add net 192.168.100: gateway rl0
# ping 192.168.100.1
PING 192.168.100.1 (192.168.100.1): 56 data bytes
64 bytes from 192.168.100.1: icmp_seq=0 ttl=255 time=0.551 ms
64 bytes from 192.168.100.1: icmp_seq=1 ttl=255 time=0.268 ms
^C
--- 192.168.100.1 ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max/stddev = 0.268/0.410/0.551/0.142 ms
# netstat -arn -finet | grep -w rl0
192.168.4 link#1 UC 3 0 rl0 =>
192.168.4.65 0:d0:b7:16:9c:c6 UHLW 1 0 rl0 1165
192.168.100 link#1 UCSc 1 0 rl0 =>
192.168.100.1 0:d0:b7:16:9c:c6 UHLW 1 4 rl0 1192
Script done on Tue Jun 12 16:17:12 2001
This is needed to pick up the right headers. Wrong headers from
src/contrib/ipfilter are used otherwise.
The right fix would be to fix contrib/ipfilter C sources to pick up
headers from <sys/netinet>.
Noticed by: peter
This work was based on kame-20010528-freebsd43-snap.tgz and some
critical problem after the snap was out were fixed.
There are many many changes since last KAME merge.
TODO:
- The definitions of SADB_* in sys/net/pfkeyv2.h are still different
from RFC2407/IANA assignment because of binary compatibility
issue. It should be fixed under 5-CURRENT.
- ip6po_m member of struct ip6_pktopts is no longer used. But, it
is still there because of binary compatibility issue. It should
be removed under 5-CURRENT.
Reviewed by: itojun
Obtained from: KAME
MFC after: 3 weeks
the individual options to increment argv and decrement argc. This
caused the -T option to swallow an extra argument.
PR: 27982
Submitted by: Samuel Greear <sgreear@vsni.com>
a route to the gateway and caches it in the route structure.
It may happen (if the routing table is screwed) that the gateway
route is the same route as the one being modified, in which case
a kernel reports EDQUOT. Be more verbose about this:
# route add -net 10 192.168.4.65
add net 10: gateway 192.168.4.65
# netstat -rn -finet
Routing tables
Internet:
Destination Gateway Flags Refs Use Netif Expire
default 192.168.4.65 UGSc 1 7 rl0
10 192.168.4.65 UGSc 0 0 rl0
127.0.0.1 127.0.0.1 UH 0 178 lo0
192.168.4 link#1 UC 2 0 rl0 =>
192.168.4.65 0:d0:b7:16:9c:c6 UHLW 2 0 rl0 1123
Before:
# route change -net 10 10.0.0.1
route: writing to routing socket: Disc quota exceeded
change net 10: gateway 10.0.0.1: Disc quota exceeded
After:
# ./route change -net 10 10.0.0.1
route: writing to routing socket: Disc quota exceeded
change net 10: gateway 10.0.0.1: gateway uses the same route
PR: bin/1093, misc/26833
blackhole(4), except that blackhole(4) uses sysctl's. This xref
obviously isn't appropriate unless we want to xref all the other man
pages which mention sysctls, which we obviously don't (we may want to
list those sysctls, but that's another story).
PR: 27937
Submitted by: yar
PR: bin/12489
- Use inet_ntoa(3) where it should have been used. This
part of code simply wasn't converted to the "new" style
after the routename() function was converted from the
protocol-generic version to protocol-specific version
in CSRG revision 5.6.
MFC after: 1 week
but list them if -d was specified).
Avoid listing expired dynamic rules unless the (new) -e option was specified.
If specific rule numbers were listed on the command line, and the -d flag was
specified, only list dynamic rules that match the specified rule numbers.
Try to partly clean up the bleeding mess this file has become. If there is
any justice in this world, the responsible parties (you know who you are!)
should expect to wake up one morning with a horse's head in their bed. The
code still looks like spaghetti, but at least now it's *properly intented*
spaghetti (hmm? did somebody say "tagliatelle"?).
when comparing with the alternate superblock. These fields are used
for temporary in-core information only. This should fix the "VALUES
IN SUPER BLOCK DISAGREE WITH THOSE IN FIRST ALTERNATE" error from
fsck_ffs that has been seen a lot recently.
attempting to remove nonexistant exports with MNT_DELEXPORT returns
an error; before this change it always succeeded. This caused
mountd(8) to log "can't delete exports for /whatever" warnings.
Change the error code from EINVAL to a more specific ENOENT, and
make mountd ignore this error when deleting the export list. I
could have just restored the previous behaviour of returning success,
but I think an error return is a useful diagnostic.
Reviewed by: phk
printed on a single, very long, and generally unreadable line. This
isn't very useful. It's also really ugly and most of the time you don't
care what media is supported anyway.
PR: 27701
Submitted by: Brooks Davis <brooks@one-eyed-alien.net>
- introduce a -o option that displays opaque variables.
- introduce a -x option that displays opaque variables in full.
- deprecate -A in favor of -ao and -X in favor of -ax.
- remove -A and -X from usage() and SYNOPSIS (but not from DESCRIPTION).
- ignore -a if one or more variables were listed on the command line.
- deprecate -w, it is not needed to determine the user's intentions.
- some language and style cleanup in the man page.
This commit should not break any existing scripts.
MFC after: 4 weeks
despite the fact that most people want to set exactly the same settings
regardless of which card they have. It has been repeatidly suggested
that this configuration should be done via ifconfig. This patch
implements the required functionality in ifconfig and add support to the
wi and an drivers. It also provides partial, untested support for the
awi driver.
PR: 25577
Submitted by: Brooks Davis <brooks@one-eyed-alien.net>
systems were repo-copied from sys/miscfs to sys/fs.
- Renamed the following file systems and their modules:
fdesc -> fdescfs, portal -> portalfs, union -> unionfs.
- Renamed corresponding kernel options:
FDESC -> FDESCFS, PORTAL -> PORTALFS, UNION -> UNIONFS.
- Install header files for the above file systems.
- Removed bogus -I${.CURDIR}/../../sys CFLAGS from userland
Makefiles.
if the kernel module is built that way.
Remove the gross debug device/non-debug device hack used to recognize
whether the kernel module was in sync with the userland module.
vinum_mirror, vinum_raid4, vinum_raid5.
Correct typos.
Show new output of the 'list' and 'ls' commands.
Update examples to use 279 kB stripe sizes instead of 256 kB.
Clarify some text.
Remove the description of the 'invalid ioctl' messages which now no
longer occur.
Add a description of the 'retryerrors' keyword.
to avoid including the kernel headers.
Move a number of definitions of userland functions from
dev/vinum/vinumext.h.
Desired by: bde
This commit is the first of a general cleanup of the header files..
It won't be enough to make bde happy.
Remove vinum_perror and associated DEVBUG definition.
Use userland expurgated versions of kernel structures, since that's
what the ioctls return now.
Remove vinum_perror.
main: Check kernel version with userland version in _vinum_conf. This
field is a constant which gets incremented every time the
kernel-userland interface changes. This enables vinum(8) to
check for the correct kernel version and to produce a useful
message if it doesn't match. For previous versions, which don't
have a version number, the length of the structure is different,
so we can recognize it via the EINVAL return from ioctl.
Supply count parameter to tokenize().
Change method of recognizing active devfs: replace devfs_is_active
with (complemented) no_devfs.
make_devices: remove references to devfs. If we're running devfs, we
don't need to call make_devices at all.
vinum_makedev (user command 'makedev'): Print a warning message if
devfs is running and don't do anything else.
Remove vinum_perror.
Modify 'list' brief printout to fit in 80 columns.
Modify 'ls' brief printout to show the drive to which the subdisk
before instead of the plex offset, which is usually less interesting.
The verbose printout remains unchanged.
Use userland expurgated versions of kernel structures, since that's
what the ioctls return now.
Move checkupdates here to simplify header file mess.
Remove 'vinum_perror'.
Only call make_devices if we're not running devfs.
Use userland expurgated versions of kernel structures, since that's
what the ioctls return now.
Update help list, which was lagging behind reality.
checkupdates: move to list.c to simplify header file mess.
vinum_stripe, vinum_mirror, vinum_raid4, vinum_raid5: change the
default stripe size from 256 k to 279 k, thus hopefully spreading
superblocks more evenly.
rules. Also, don't show dynamic rules if you only asked to see a
certain rule number.
PR: 18550
Submitted by: Lyndon Nerenberg <lyndon@orthanc.ab.ca>
Approved by: luigi
MFC after: 2 weeks
page with *all* the permissible values.
This should really be spelt ipencap (as /etc/protocols does),
but a precedent has already been set by the ipproto array in
setkey.c.
It would be nice if /etc/protocols was parsed for the upperspec
field, but I don't do yacc/lex...
This change allows policies that only encrypt the encapsulated
packets passing between the endpoints of a gif tunnel. Setting
such a policy means that you can still talk directly (and
unencrypted) between the public IP numbers with (say) ssh.
MFC after: 1 week
function; we now handle unknown protocols more gracefully.
- Cache the return from getnetconfigent() so that we don't have to
remember to call freenetconfigent() each time. This fixes a memory
leak that would cause retrying background mount_nfs processes to
slowly increase their memory usage.
longer includes machine/elf.h.
* consumers of elf.h now use the minimalist elf header possible.
This change is motivated by Binutils 2.11.0 and too much clashing over
our base elf headers and the Binutils elf headers.
least in -w's case, simply unsetting the correct bit in init_flags was not
enough. The bit may be reset later if, say, the filesystem is marked `ro'
in fstab. The command line option should override the fstab setting, but
did not. The implementation of -r was changed for consistency.
PR: 26886
Reviewed by: archie
