d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
49,647 Commits 6 Branches 133 Tags 2.6 GiB
c790e2240e
Commit Graph

56 Commits

Author SHA1 Message Date
Ollivier Robert
c790e2240e This is the patch to make my soundcard, a Creative Ensoniq AudioPCI (an 
es1371 chip, device id 0x58801274 rev 0x02).

Submitted by:	Kenneth Wayne Culver <culverk@wam.umd.edu>
 2000-07-02 14:17:41 +00:00
Cameron Grant
70776a9c0b add alpha-quality recording code and handle pci error interrupts - this may 
prevent the card generating an nmi on ecc systems.  for now a message is
printed on every pci error and it seems every time we start playng we get one
 2000-06-13 23:24:40 +00:00
Peter Wemm
83fc8b6d34 Unused includes: #include "pci.h", #include "pcm.h" 2000-06-10 07:15:15 +00:00
Dan Moschuk
7bf9834a55 Increase delay from 10mu to 1000mu when reading play control size. This 
allows the YMF744 to initialize properly.
 2000-06-09 16:44:30 +00:00
Cameron Grant
2f9aa04e7f this driver does not support the cs4281 and probably never will, different code 
will be required
 2000-06-06 22:42:57 +00:00
Cameron Grant
dafad92c7d support recording 2000-06-06 22:34:09 +00:00
Peter Wemm
3e0f102e57 With this evil hack the DS1 driver works on our Intel desktop 
motherboards that use YMF740's.  It has a strange subvendor and subdevice
ID and requires a disturbingly long delay after the ac97 codec init.
Cameron hasn't had this driver tested on another 740 yet, so we don't know
if this is a quirk of all 740's, or if its just something about the codec
that Intel used.
 2000-06-01 03:58:27 +00:00
Cameron Grant
e05327ee1b if we get bad values for playctrlsize, the firmware may not have initialised 
yet so retry.
 2000-06-01 01:29:05 +00:00
Cameron Grant
2176a9588a add a bit more diagnostic info for the bus_dmamap_load failure case 2000-05-31 19:04:12 +00:00
Cameron Grant
bd68ce8be9 yamaha ds1/ds1e pci sound driver - work in progress, mixer and playback only. 
tested on ymf724f only.

conf/files entry is commented out, enable it manually to test this code and
let me know results.
 2000-05-31 03:21:36 +00:00
Peter Wemm
4cbef178df Use the correct name for a mapping register, not the old FreeBSD 2.x 
compatability name.
 2000-05-28 15:15:14 +00:00
Cameron Grant
35f9e4a1db handle emulated dma reads 
don't try to get sample size from snd_dbuf
 2000-05-26 21:15:47 +00:00
Jake Burkholder
e39756439c Back out the previous change to the queue(3) interface. 
It was not discussed and should probably not happen.

Requested by:		msmith and others
 2000-05-26 02:09:24 +00:00
Jake Burkholder
740a1973a6 Change the way that the queue(3) structures are declared; don't assume that 
the type argument to *_HEAD and *_ENTRY is a struct.

Suggested by:	phk
Reviewed by:	phk
Approved by:	mdodd
 2000-05-23 20:41:01 +00:00
Yoshihiro Takahashi
d2fce85dba Oops, rman_get_bushandle() should be converted to rman_get_virtual() 
if resources are mapped to memory.
 2000-05-20 16:15:50 +00:00
Yoshihiro Takahashi
7c14268dbd Supported the mss on PC-98 and Sound Blaster 98. 
Submitted by:	"T.Yamaoka" <taka@windows.squares.net>
 2000-05-19 15:41:52 +00:00
Cameron Grant
35d9c60d76 repo-copied to sys/gnu/dev/sound/pci/emu10k1.h 2000-04-26 19:53:46 +00:00
Cameron Grant
0ffbc64fe6 update for new location of emu10k1.h under sys/gnu 2000-04-26 19:51:19 +00:00
Cameron Grant
19b6ac092e try the fix from creative bugzilla for nmi problem 
Obtained from:	creative labs bugzilla
 2000-04-18 19:11:38 +00:00
Cameron Grant
674c45bd04 make drivers start at beginning of buffer when triggered - improves mmap. 
not all tested.

not sure about aureal.c or csapcm.c
 2000-04-17 16:57:12 +00:00
Cameron Grant
2d3ce9d56e decrease buffer size to 4k 
use a seperate channel for generating irqs so we get a buffer-half-empty
interrupt, prevents repeating on underflow
 2000-04-05 02:14:26 +00:00
Cameron Grant
8b455f8d05 move buffer size definition to .c file for consistency, and reduce it to 4k 2000-04-05 00:38:00 +00:00
Cameron Grant
97b3c9d804 make the click on starting output go away 2000-04-04 02:16:15 +00:00
Cameron Grant
8046c76306 fix missing defines and prototype for emu_vdump() 2000-04-03 00:28:43 +00:00
Cameron Grant
c067afaa06 unfinished sblive driver, playback/mixer only for now - not enabled in 
conf/files

i don't seem to be clearing the cache right resulting in a short initial
burst of noise, despite doing the same as creative and alsa.  i'm committing
now so more eyes can pore over the code.
 2000-04-02 07:41:17 +00:00
Cameron Grant
e620d95952 fail in attach if we seem to have no ac97 codec 2000-04-01 22:24:03 +00:00
Cameron Grant
39004e693d update the ac97 layer: 
* add a callback for initialising the mixer interface
* support ac97 2.1 variable rate audio feature

fix ac97-using drivers for the above

add suspend/resume support for neomagic
 2000-03-20 15:30:50 +00:00
Peter Wemm
5775b1a2b6 Tidy up stray or bogus #if NFOO > 0 and #include "foo.h". 2000-01-29 18:48:30 +00:00
Seigo Tanimura
8f7076b8ff The pointer of the serial FIFO in the DSP seems to make an error 
upon starting/stopping the DSP. Correct the pointer in addition
to clearing the FIFO.
 2000-01-23 07:04:02 +00:00
Cameron Grant
03a00905d3 update ac97 layer to use device_printf when printing messages 2000-01-18 17:13:43 +00:00
Peter Wemm
615407b5a0 Some SB128's (ES1371) have a different PCI vendor id. Vendor == 0x3274 
instead of the normal 0x1274.

Tested by:	des
 2000-01-17 07:54:00 +00:00
Cameron Grant
0a12fe07e7 oops, best play format was set to unsigned 16 bit instead of signed 16 bit 
stereo.  remenant from testing.
 2000-01-16 12:05:07 +00:00
Cameron Grant
5b4c3f3ca0 be less verbose 2000-01-13 06:00:57 +00:00
Cameron Grant
e7fb32964c exclude chips with subdevices specified on a list of non-ac97 chips 2000-01-11 10:37:16 +00:00
Cameron Grant
10b23f4c02 don't complain about bad intrs unless we get 1000 of them consecutively 
whilst we are playing or recording.  since we should irq ~20 times/sec when
active, this should never trigger.  in theory.  if it never does trigger,
the check will be removed.
 2000-01-10 06:19:20 +00:00
Cameron Grant
4ee074718b return the sample rate set instead of 0. oops. mpg123 should now work. 2000-01-10 01:59:12 +00:00
Cameron Grant
d5fa8408e6 driver for neomagic 256av and 256zx 
Obtained from:	anonymous author, heavily derived
 2000-01-09 08:14:11 +00:00
Cameron Grant
ebb0b1f9bb set up the pci regs properly for busmastering. this makes the card work on 
my smp box.
 2000-01-05 02:03:55 +00:00
Seigo Tanimura
769309aaf2 Do not start/stop DMA transfer if it is already started/stopped. 2000-01-03 05:26:12 +00:00
Seigo Tanimura
f259d7eed5 - Handle an interrupt for csa primarily in the bridge driver, 
then invoke the children. As the value of HISR can be read
  only once, pass the HISR to the children via struct
  csa_bridgeinfo, stored in the ivars of them.
- Clear the contents of serial FIFO upon stopping the DMA for
  playing. This may eliminate buzz on playing. Experimental.
 2000-01-03 02:51:16 +00:00
Seigo Tanimura
f7e00c54d1 Correct the delay durations as in the sample sources provided by Crystal Semiconductor. 2000-01-01 09:07:03 +00:00
Cameron Grant
2635fee807 make es1373 chips with ac97 2.1 work on troublesome motherboards 
Submitted by:	Russell Cattelan <cattelan@thebarn.com>
 1999-12-29 05:44:17 +00:00
Cameron Grant
a0b57fb738 - latest 2ndbuffer patch 
- make chn_setdir work for rec on isa cards
- note: es1371 does not irq in smp

Submitted by:	tanimura
 1999-12-29 03:46:54 +00:00
Cameron Grant
d37a380ddb general tidyup 1999-12-19 17:51:32 +00:00
Cameron Grant
dedf4424a0 increase buffer size, reduce number of channels allocated since we only use 
1 at the moment
 1999-12-12 02:16:14 +00:00
Seigo Tanimura
7012990a73 Make the origins clear. 
Pointed out by:	Tatoku Ogaito <tacha@trap.fukui-med.ac.jp>
 1999-12-10 01:20:08 +00:00
Peter Wemm
c2af6f650c Update for pnp adjustments regarding NPNP. 
Also, optimize out a mess of #if's that were duplicating work already
done by config(8).  For example, if a file is marked as
"dev/sound/pci/foo.c optional pcm pci" then it's only added if pcm *and*
pci are present, so #if NPCM > 0 and #if NPCI > 0 are totally redundant.
A bit more work is still needed.

Discussed with: cg (a few weeks ago)
 1999-12-06 18:26:33 +00:00
Matthew N. Dodd
fe0d408987 Remove the 'ivars' arguement to device_add_child() and 
device_add_child_ordered().  'ivars' may now be set using the
device_set_ivars() function.

This makes it easier for us to change how arbitrary data structures are
associated with a device_t.  Eventually we won't be modifying device_t
to add additional pointers for ivars, softc data etc.

Despite my best efforts I've probably forgotten something so let me know
if this breaks anything.  I've been running with this change for months
and its been quite involved actually isolating all the changes from
the rest of the local changes in my tree.

Reviewed by:	peter, dfr
 1999-12-03 08:41:24 +00:00
Seigo Tanimura
125fdb9848 Comment out the newmidi stuff. 1999-11-22 10:28:05 +00:00
Seigo Tanimura
fe1a5d1c2f - Introduce the bridge drivers for Sound Blaser, GUS and Crystal 
Semiconductor CS461x/428x.
- Add support for GUS and CS461x/428x pcm.

Bridges reviewed by:			dfr, cg
GUS non-PnP support submitted by:	Ville-Pertti Keinonen <will@iki.fi>
GUS PnP support tested by:		Michiru Saito <mich@mtci.ne.jp>
 1999-11-22 06:07:49 +00:00