Commit Graph

39 Commits

Author SHA1 Message Date
Rafal Jaworowski
0ed948780c Initial support of loader(8) for ARM machines running U-Boot.
This uses the common U-Boot support lib (sys/boot/uboot, already used on
FreeBSD/powerpc), and assumes the underlying firmware has the modern API for
stand-alone apps enabled in the config (CONFIG_API).

Only netbooting is supported at the moment.

Obtained from:	Marvell, Semihalf
2008-10-14 10:11:14 +00:00
Marcel Moolenaar
e641a443f4 Add __elfN(relocation_offset). It holds the offset between the virtual
(link) address and the physical (load) address. Ideally, the mapping
between link and load addresses should be abstracted by the copyin(),
copyout() and readin() functions, so that we don't have to add kluges
in __elfN(loadimage)(). Then, we could also have paged virtual memory
for the kernel. This can be important under EFI, where you need to
allocate physical memory form the firmware if you want to work in all
scenarios.
2008-02-23 18:33:50 +00:00
Ruslan Ermilov
000a0f2a71 Unbreak compile with ELF_VERBOSE defined, and fix format warnings. 2006-11-02 17:52:43 +00:00
Ruslan Ermilov
593bbd2195 Revert the last change. Masking only 2 MSBs of the virtual address
to get the physical address doesn't work for all values of KVA_PAGES,
while masking 8 MSBs works for all values of KVA_PAGES that are
multiple of 4 for non-PAE and 8 for PAE.  (This leaves us limited
with 12MB for non-PAE kernels and 14MB for PAE kernels.)

To get things right, we'd need to subtract the KERNBASE from the
virtual address (but KERNBASE is not easy to figure out from here),
or have physical addresses set properly in the ELF headers.

Discussed with:	jhb
2006-11-02 17:28:38 +00:00
Ruslan Ermilov
da6d4298b7 Because the BTX mini-kernel now uses flat memory mode and clients
are no longer limited to a virtual address space of 16 megabytes,
only mask high two bits of a virtual address.  This allows to load
larger kernels (up to 1 gigabyte).  Not masking addresses at all
was a bad idea on machines with less than >3G of memory -- kernels
are linked at 0xc0xxxxxx, and that would attempt to load a kernel
at above 3G.  By masking only two highest bits we stay within the
safe limits while still allowing to boot larger kernels.

(This is a safer reimplmentation of sys/boot/i386/boot2/boot.2.c
rev. 1.71.)

Prodded by:	jhb
Tested by:	nyan (pc98)
2006-10-29 14:50:58 +00:00
John Baldwin
be5d6589e0 Remove more Alpha bits from the boot code including fixing several
stale comments.
2006-05-12 04:09:53 +00:00
Marcel Moolenaar
757686b115 Make our ELF64 type definitions match standards. In particular this
means:
o  Remove Elf64_Quarter,
o  Redefine Elf64_Half to be 16-bit,
o  Redefine Elf64_Word to be 32-bit,
o  Add Elf64_Xword and Elf64_Sxword for 64-bit entities,
o  Use Elf_Size in MI code to abstract the difference between
   Elf32_Word and Elf64_Word.
o  Add Elf_Ssize as the signed counterpart of Elf_Size.

MFC after: 2 weeks
2005-12-18 04:52:37 +00:00
Ian Dowse
45b8d7c46e Separate out the ELF relocation code from the ELF loader, and add
better relocation support for the amd64 and i386 platforms. This
should not result in any change in functionality, but moves a step
towards supporting the relocatable object file modules on amd64.

The same hack/trick as load_elf*.c uses is used here to simultaneously
support both elf32 and elf64 on amd64 and i386.
2004-08-28 23:03:05 +00:00
Ian Dowse
c0b43624d5 Add a few helper functions for zeroing kernel space and reading
from specified file offsets. Make use of these in load_elf.c.
2004-08-28 14:57:34 +00:00
Bruce Evans
754df37025 Fixed a misspelling of 0 as NULL. 2004-03-11 10:09:01 +00:00
David E. O'Brien
1809be3cd4 Use __FBSDID().
Also some minor style cleanups.
2003-08-25 23:30:41 +00:00
Peter Wemm
ab6859fd2f Fix lookup of module metadata on amd64 systems. While this is in
common code, the non-trivial part is #ifdef'ed and only executes when
loading amd64 kernels. The rest is trivial but needed for the the amd64
case. (Two variables changed from char ** to Elf_Addr).

Approved by:	re (amd64 "low-risk" stuff)
2003-05-12 05:48:09 +00:00
Peter Wemm
48a0b96a50 Enable the i386 loader to load and run an amd64 kernel. If this puts
things over floppy size limits, I can exclude it for release builds or
something like that.  Most of the changes are to get the load_elf.c file
into a seperate elf32_ or elf64_ namespace so that you can have two
ELF loaders present at once.  Note that for 64 bit kernels, it actually
starts up the kernel already in 64 bit mode with paging enabled.  This
is really easy because we have a known minimum feature set.

Of note is that for amd64, we have to pass in the bios int 15 0xe821
memory map because once in long mode, you absolutely cannot make VM86
calls.  amd64 does not use 'struct bootinfo' at all.  It is a pure loader
metadata startup, just like sparc64 and powerpc.  Much of the
infrastructure to support this was adapted from sparc64.
2003-05-01 03:56:30 +00:00
Poul-Henning Kamp
197e5e73ef Libdisk does not need to include <sys/diskslice.h> any more.
Move the remaining bits of <sys/diskslice.h> to <i386/include/bootinfo.h>

Move i386/pc98 specific bits from <sys/reboot.h> to
<i386/include/bootinfo.h> as well.

Adjust includes in sys/boot accordingly.
2003-04-04 16:35:16 +00:00
Jake Burkholder
a438ad0718 Fix module dependency (pre)loading on sparc64 by relocating the variables
read from the raw kld files.

Submitted by:	Hartmut Brandt <brandt@fokus.gmd.de>
PR:		46870
Tested on:	alpha (obrien), i386, sparc64
2003-01-21 05:46:46 +00:00
David E. O'Brien
54fd053e6c We don't need bootinfo any more, and sparc64 doesn't have it anyways. 2002-05-10 01:20:37 +00:00
Jake Burkholder
bb75d97e13 Fix another unsigned long used to index the symbol table which should be
Elf_Hashelt.
2002-04-09 00:05:46 +00:00
Peter Wemm
93b4f334b6 Use the correct elf hash table entry type. This matches a similar fix
in the kernel side of things some time ago.  The hash table entries are
always 32 bits wide, even on 64 bit machines.
2002-04-06 04:09:42 +00:00
Peter Wemm
505222d35f Implement the long-awaited module->file cache database. A userland
tool (kldxref(8)) keeps a cache of what modules and versions are inside
what .ko files.  I have tested this on both Alpha and i386.

Submitted by:	bp
2001-09-11 01:09:24 +00:00
David Malone
5e209ca776 Get rid of some constness warnings. 2001-06-24 12:08:47 +00:00
Peter Wemm
5c9321595d Convert the elf loader to the new linker set layout for elf files.
This should make dependencies at load time work like before.  Oops.

Noticed by:	markm
2001-06-19 07:41:07 +00:00
Peter Wemm
357f511a58 Fix some of the worst formatting bug (seperate commit) 2001-06-19 06:48:58 +00:00
John Baldwin
4ae4202e70 Cleanup warnings. Most of these are signed/unsigned warnings, as well as
some added const's.
2000-08-03 09:14:02 +00:00
Daniel C. Sobral
7302acac1c Remove residual printf.
Prodded by: msmith
2000-06-07 03:33:12 +00:00
Boris Popov
cf448cb2c9 long != int on Alphas. 2000-05-12 05:16:37 +00:00
Boris Popov
801e789e01 Update loader logic to distinguish modules vs. files.
Add support for module metadata. The old way of dependancy
handling will be supported for a while.

Reviewed by:	peter
2000-05-01 17:41:25 +00:00
Boris Popov
ce0d1c79c3 Fix the loader to handle module dependencies properly. More fixes
will be provided after modmetadata appears in the kernel.

Reviewed by:	msmith
Approved by:	jkh
2000-02-25 05:10:44 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Tor Egge
3d8befc22d Enable load of i386 ELF kernels with larger KVA range (e.g. starting at
0xe0100000u or 0xc0100000u instead of the usual 0xf0100000u).
1999-02-15 17:36:58 +00:00
Peter Wemm
717b58274a Don't forget a trailing \n when loading a kernel that has been stripped.
(This might make ELF_VERBOSE look funny, but I'm tempted to delete that
 anyway)
1999-01-04 18:37:41 +00:00
Peter Wemm
a6575097c6 Load the first page of the file and use the headers in it. This should
avoid the need to seek back to offset zero which is causing trouble on
the Alpha with a gzipped kernel.
1998-10-17 03:06:38 +00:00
Peter Wemm
3323768d99 "fix" the gzipped kernel load problem by having the loader check that it
can seek back to the first PT_LOAD and doing a close/reopen if it cannot.
This is because the first PT_LOAD section includes the ELF headers.
This fixes gzipped kernels on the i386, it should solve mike's problem
for the Alpha.
1998-10-16 03:04:15 +00:00
Doug Rabson
94bb328025 Change some printfs so that ELF_VERBOSE prints meaningful values on the alpha. 1998-10-15 21:56:47 +00:00
Peter Wemm
adf45b4bb5 Tweak the output one more time again. The kernel or module pathname
is useful, and usually fits all on one line with the load sizes.
1998-10-14 00:41:17 +00:00
Peter Wemm
21f1bf72d3 Make the ELF load messages cleaner. 1998-10-13 09:25:27 +00:00
Peter Wemm
2d636ab077 Only print kernel entry point during load.
Drastically quieten down the verbose load progress messages.  They were
more useful for debugging than anything, but are beyond a joke when loading
a few dozen modules.
Simplify the ELF extended symbol table load format.  Just take the main
symbol table and the string table that corresponds.  This is what we will
be getting local symbols from.  (needed for the alpha stack tracebacks).
Use the (optional) full symbol tables in lookups.  This means we have to
furhter distinguish between symbols that can come from the dynamic linking
table and the complete table.
The alpha boot code now needs to be adapted as ddb/db_elf.c cannot use
the simpler format.
I have not implemented loading the extended symbol tables from the syscall
interface yet, just for preloaded modules.
I am not sure about the symbol resolution.  I *think* it's possible that
a local symbol can be found in preference to a global, depending on the
search sequence and dependency tree.
1998-10-12 09:13:50 +00:00
Peter Wemm
376f525c56 Implement preloading for elf modules
- get dependency info from PT_DYNAMIC's DT_NEEDED tags.
 - store MODINFOMD_DYNAMIC for the kernel's later use
setenv kernelname when we have it
Fix firstaddr/lastaddr calculation (duh! :-)
Explicitly skip string table with section names in it.
1998-10-09 23:18:43 +00:00
Peter Wemm
2e06076f23 First shot at loading elf symbols. Things are a bit strange because
of the ..umm.. "wierd" way binutils lays out the file.  The section
headers are nearly at the end of the file and this is a problem when
loading from a .gz file which can't seek backwards (or has a limited
reverse seek, ~2K from memory).

This is intended to be compatable with the ddb/db_elf.c code and the
alpha/libalpha/elf_freebsd.c layout.  I've studied these (which are NetBSD
derived) but did it a bit differently.  Naturally the process is similar
since it's supposed to end up with the same result.
1998-10-02 08:04:56 +00:00
Peter Wemm
efca1dc5ee ELF loader, part 1. It works with ELF kernels generated on the i386
so far, and should probably be able to be made to work for the alpha
without too much trouble once it's connected up and my assumptions tested.

I think (but have not tested) it will also load "old" ELF kernels that
were not linked with DYNAMIC headers.

The module glue is yet to come. (oh fun.. :-)

It does not explicitly load symbols [yet].  The _DYNAMIC data contains a
runtime symbol set that ddb can use via ddb/db_kld.c.  It'll be missing
some detail that stabs normally provides (eg: number of args to a function,
line numbers, etc).  On the other hand, those minimal symbols will always
be available even on a stripped kernel.

This is mostly stolen from load_aout.c with some ideas from
alpha/libalpha/elf_freebsd.c.
1998-09-30 19:38:26 +00:00