Except for the case where we use the cloner library (clone_create() and
friends), there is no reason to enforce a unique device minor number
policy. There are various drivers in the source tree that allocate unr
pools and such to provide minor numbers, without using them themselves.
Because we still need to support unique device minor numbers for the
cloner library, introduce a new flag called D_NEEDMINOR. All cdevsw's
that are used in combination with the cloner library should be marked
with this flag to make the cloning work.
This means drivers can now freely use si_drv0 to store their own flags
and state, making it effectively the same as si_drv1 and si_drv2. We
still keep the minor() and dev2unit() routines around to make drivers
happy.
The NTFS code also used the minor number in its hash table. We should
not do this anymore. If the si_drv0 field would be changed, it would no
longer end up in the same list.
Approved by: philip (mentor)
than checking whether audit is enabled globally, instead check whether
the current thread has an audit record. This avoids entering the audit
code to collect argument data if auditing is enabled but the current
system call is not of interest to audit.
MFC after: 1 week
Sponsored by: Apple, Inc.
exit requires entering the audit code. The result is much the same,
but they mean different things.
MFC afer: 3 days
Submitted by: Diego Giagio <dgiagio at gmail dot com>
explicitly select write locking for all use of the inpcb mutex.
Update some pcbinfo lock assertions to assert locked rather than
write-locked, although in practice almost all uses of the pcbinfo
rwlock main exclusive, and all instances of inpcb lock acquisition
are exclusive.
This change should introduce (ideally) little functional change.
However, it lays the groundwork for significantly increased
parallelism in the TCP/IP code.
MFC after: 3 months
Tested by: kris (superset of committered patch)
after each SYSINIT() macro invocation. This makes a number of
lightweight C parsers much happier with the FreeBSD kernel
source, including cflow's prcc and lxr.
MFC after: 1 month
Discussed with: imp, rink
returns EINVAL. Right now we return 0 or success for invalid commands,
which could be quite problematic in certain conditions.
MFC after: 1 week
Discussed with: rwatson
a queue entry field, just copy out the unsigned int that is the trigger
message. In practice, auditd always requested sizeof(unsigned int), so
the extra bytes were ignored, but copying them out was not the intent.
MFC after: 1 month
global audit mutex and condition variables, with an sx lock which protects
the trail vnode and credential while in use, and is acquired by the system
call code when rotating the trail. Previously, a "message" would be sent
to the kernel audit worker, which did the rotation, but the new code is
simpler and (hopefully) less error-prone.
Obtained from: TrustedBSD Project
MFC after: 1 month
This makes sure that process tokens credentials with un-initialized
audit contexts are handled correctly. Currently, when invariants are
enabled, this change fixes a panic by ensuring that we have a valid
termid family. Also, this fixes token generation for process tokens
making sure that userspace is always getting a valid token.
This is consistent with what Solaris does when an audit context is
un-initialized.
Obtained from: TrustedBSD Project
MFC after: 1 week
"BSM conversion requested for unknown event 43140"
It should be noted that we need to audit the fd argument for this system
call.
Obtained from: TrustedBSD Project
MFC after: 1 week
conjuction with 'thread' argument passing which is always curthread.
Remove the unuseful extra-argument and pass explicitly curthread to lower
layer functions, when necessary.
KPI results broken by this change, which should affect several ports, so
version bumping and manpage update will be further committed.
Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
Remove this argument and pass curthread directly to underlying
VOP_LOCK1() VFS method. This modify makes the code cleaner and in
particular remove an annoying dependence helping next lockmgr() cleanup.
KPI results, obviously, changed.
Manpage and FreeBSD_version will be updated through further commits.
As a side note, would be valuable to say that next commits will address
a similar cleanup about VFS methods, in particular vop_lock1 and
vop_unlock.
Tested by: Diego Sardina <siarodx at gmail dot com>,
Andrea Di Pasquale <whyx dot it at gmail dot com>
supports the removal of hard-coded audit class constants in OpenBSM
1.0. All audit classes are now dynamically configured via the
audit_class database.
Obtained from: TrustedBSD Project
This change introduces audit_proc_coredump() which is called by coredump(9)
to create an audit record for the coredump event. When a process
dumps a core, it could be security relevant. It could be an indicator that
a stack within the process has been overflowed with an incorrectly constructed
malicious payload or a number of other events.
The record that is generated looks like this:
header,111,10,process dumped core,0,Thu Oct 25 19:36:29 2007, + 179 msec
argument,0,0xb,signal
path,/usr/home/csjp/test.core
subject,csjp,csjp,staff,csjp,staff,1101,1095,50457,10.37.129.2
return,success,1
trailer,111
- We allocate a completely new record to make sure we arent clobbering
the audit data associated with the syscall that produced the core
(assuming the core is being generated in response to SIGABRT and not
an invalid memory access).
- Shuffle around expand_name() so we can use the coredump name at the very
beginning of the coredump call. Make sure we free the storage referenced
by "name" if we need to bail out early.
- Audit both successful and failed coredump creation efforts
Obtained from: TrustedBSD Project
Reviewed by: rwatson
MFC after: 1 month
from Mac OS X Leopard--rationalize naming for entry points to
the following general forms:
mac_<object>_<method/action>
mac_<object>_check_<method/action>
The previous naming scheme was inconsistent and mostly
reversed from the new scheme. Also, make object types more
consistent and remove spaces from object types that contain
multiple parts ("posix_sem" -> "posixsem") to make mechanical
parsing easier. Introduce a new "netinet" object type for
certain IPv4/IPv6-related methods. Also simplify, slightly,
some entry point names.
All MAC policy modules will need to be recompiled, and modules
not updates as part of this commit will need to be modified to
conform to the new KPI.
Sponsored by: SPARTA (original patches against Mac OS X)
Obtained from: TrustedBSD Project, Apple Computer
state is stored in an extended subject token now. Make sure
that we are using the extended data. This fixes the termID
for process tokens.
Obtained from: TrustedBSD Project
Discussed with: rwatson
MFC after: 1 week
to kproc_xxx as they actually make whole processes.
Thos makes way for us to add REAL kthread_create() and friends
that actually make theads. it turns out that most of these
calls actually end up being moved back to the thread version
when it's added. but we need to make this cosmetic change first.
I'd LOVE to do this rename in 7.0 so that we can eventually MFC the
new kthread_xxx() calls.
on multiple different audit pipes. The old method used cv_signal()
which would result in only one thread being woken up after we
appended a record to it's queue. This resulted in un-timely wake-ups
when processing audit records real-time.
- Assign PSOCK priority to threads that have been sleeping on a read(2).
This is the same priority threads are woken up with when they select(2)
or poll(2). This yields fairness between various forms of sleep on
the audit pipes.
Obtained from: TrustedBSD Project
Discussed with: rwatson
MFC after: 1 week
and replace with software-testable sysctl node (security.audit) that
can be used to detect kernel audit support.
Obtained from: TrustedBSD Project
Approved by: re (kensmith)
- In audit_bsm.c, make sure all the arguments: ARG_AUID, ARG_ASID, ARG_AMASK,
and ARG_TERMID{_ADDR} are valid before auditing their arguments. (This is done
for both setaudit and setaudit_addr.
- Audit the arguments passed to setaudit_addr(2)
- AF_INET6 does not equate to AU_IPv6. Change this in au_to_in_addr_ex() so the
audit token is created with the correct type. This fixes the processing of the
in_addr_ex token in users pace.
- Change the size of the token (as generated by the kernel) from 5*4 bytes to
4*4 bytes (the correct size of an ip6 address)
- Correct regression from ucred work which resulted in getaudit() not returning
E2BIG if the subject had an ip6 termid
- Correct slight regression in getaudit(2) which resulted in the size of a pointer
being passed instead of the size of the structure. (This resulted in invalid
auditinfo data being returned via getaudit(2))
Reviewed by: rwatson
Approved by: re@ (kensmith)
Obtained from: TrustedBSD Project
MFC after: 1 month
mpo_check_proc_setaudit_addr to be used when controlling use of
setaudit_addr(), rather than mpo_check_proc_setaudit(), which takes a
different argument type.
Reviewed by: csjp
Approved by: re (kensmith)
embedded storage in struct ucred. This allows audit state to be cached
with the thread, avoiding locking operations with each system call, and
makes it available in asynchronous execution contexts, such as deep in
the network stack or VFS.
Reviewed by: csjp
Approved by: re (kensmith)
Obtained from: TrustedBSD Project
argument from being file descriptor index into the pointer to struct file:
part 2. Convert calls missed in the first big commit.
Noted by: rwatson
Pointy hat to: kib
remove associated comments.
Slip audit_file_rotate_wait assignment in audit_rotate_vnode() before
the drop of the global audit mutex.
Obtained from: TrustedBSD Project
inline it when needed already, and the symbol is also required outside of
audit.c. This silences a new gcc warning on the topic of using __inline__
instead of __inline.
MFC after: 3 days
calls. Add MAC Framework entry points and MAC policy entry points for
audit(), auditctl(), auditon(), setaudit(), aud setauid().
MAC Framework entry points are only added for audit system calls where
additional argument context may be useful for policy decision-making; other
audit system calls without arguments may be controlled via the priv(9)
entry points.
Update various policy modules to implement audit-related checks, and in
some cases, other missing system-related checks.
Obtained from: TrustedBSD Project
Sponsored by: SPARTA, Inc.
tokens. Currently, we do not support the set{get}audit_addr(2) system
calls which allows processes like sshd to set extended or ip6
information for subject tokens.
The approach that was taken was to change the process audit state
slightly to use an extended terminal ID in the kernel. This allows
us to store both IPv4 IPv6 addresses. In the case that an IPv4 address
is in use, we convert the terminal ID from an struct auditinfo_addr to
a struct auditinfo.
If getaudit(2) is called when the subject is bound to an ip6 address,
we return E2BIG.
- Change the internal audit record to store an extended terminal ID
- Introduce ARG_TERMID_ADDR
- Change the kaudit <-> BSM conversion process so that we are using
the appropriate subject token. If the address associated with the
subject is IPv4, we use the standard subject32 token. If the subject
has an IPv6 address associated with them, we use an extended subject32
token.
- Fix a couple of endian issues where we do a couple of byte swaps when
we shouldn't be. IP addresses are already in the correct byte order,
so reading the ip6 address 4 bytes at a time and swapping them results
in in-correct address data. It should be noted that the same issue was
found in the openbsm library and it has been changed there too on the
vendor branch
- Change A_GETPINFO to use the appropriate structures
- Implement A_GETPINFO_ADDR which basically does what A_GETPINFO does,
but can also handle ip6 addresses
- Adjust get{set}audit(2) syscalls to convert the data
auditinfo <-> auditinfo_addr
- Fully implement set{get}audit_addr(2)
NOTE: This adds the ability for processes to correctly set extended subject
information. The appropriate userspace utilities still need to be updated.
MFC after: 1 month
Reviewed by: rwatson
Obtained from: TrustedBSD
and flags with an sxlock. This leads to a significant and measurable
performance improvement as a result of access to shared locking for
frequent lookup operations, reduced general overhead, and reduced overhead
in the event of contention. All of these are imported for threaded
applications where simultaneous access to a shared file descriptor array
occurs frequently. Kris has reported 2x-4x transaction rate improvements
on 8-core MySQL benchmarks; smaller improvements can be expected for many
workloads as a result of reduced overhead.
- Generally eliminate the distinction between "fast" and regular
acquisisition of the filedesc lock; the plan is that they will now all
be fast. Change all locking instances to either shared or exclusive
locks.
- Correct a bug (pointed out by kib) in fdfree() where previously msleep()
was called without the mutex held; sx_sleep() is now always called with
the sxlock held exclusively.
- Universally hold the struct file lock over changes to struct file,
rather than the filedesc lock or no lock. Always update the f_ops
field last. A further memory barrier is required here in the future
(discussed with jhb).
- Improve locking and reference management in linux_at(), which fails to
properly acquire vnode references before using vnode pointers. Annotate
improper use of vn_fullpath(), which will be replaced at a future date.
In fcntl(), we conservatively acquire an exclusive lock, even though in
some cases a shared lock may be sufficient, which should be revisited.
The dropping of the filedesc lock in fdgrowtable() is no longer required
as the sxlock can be held over the sleep operation; we should consider
removing that (pointed out by attilio).
Tested by: kris
Discussed with: jhb, kris, attilio, jeff
system calls now enter without Giant held, and then in some cases, acquire
Giant explicitly.
Remove a number of other MPSAFE annotations in the credential code and
tweak one or two other adjacent comments.
(due to an early reset or the like), remember to unlock the socket lock.
This will not occur in 7-CURRENT, but could in theory occur in 6-STABLE.
MFC after: 1 week
manipulation is visible to the subject process. Remove XXX comments
suggesting this.
Convert one XXX on a difference from Darwin into a note: it's not a
bug, it's a feature.
Obtained from: TrustedBSD Project
- Replace XXX with Note: in several cases where observations are made about
future functionality rather than problems or bugs.
- Remove an XXX comment about byte order and au_to_ip() -- IP headers must
be submitted in network byte order. Add a comment to this effect.
- Mention that we don't implement select/poll for /dev/audit.
Obtained from: TrustedBSD Project
specific privilege names to a broad range of privileges. These may
require some future tweaking.
Sponsored by: nCircle Network Security, Inc.
Obtained from: TrustedBSD Project
Discussed on: arch@
Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri,
Alex Lyashkov <umka at sevcity dot net>,
Skip Ford <skip dot ford at verizon dot net>,
Antoine Brodin <antoine dot brodin at laposte dot net>
sockaddr_storage. This structure is defined in RFC 2553 and is a more
semantically correct structure for holding IP and IP6 sockaddr information.
struct sockaddr is not big enough to hold all the required information for
IP6, resulting in truncated addresses et al when auditing IP6 sockaddr
information.
We also need to assume that the sa->sa_len has been validated before the call to
audit_arg_sockaddr() is made, otherwise it could result in a buffer overflow.
This is being done to accommodate auditing of network related arguments (like
connect, bind et al) that will be added soon.
Discussed with: rwatson
Obtained from: TrustedBSD Project
MFC after: 2 weeks
not trust jails enough to execute audit related system calls. An example of
this is with su(1), or login(1) within prisons. So, if the syscall request
comes from a jail return ENOSYS. This will cause these utilities to operate
as if audit is not present in the kernel.
Looking forward, this problem will be remedied by allowing non privileged
users to maintain and their own audit streams, but the details on exactly how
this will be implemented needs to be worked out.
This change should fix situations when options AUDIT has been compiled into
the kernel, and utilities like su(1), or login(1) fail due to audit system
call failures within jails.
This is a RELENG_6 candidate.
Reported by: Christian Brueffer
Discussed with: rwatson
MFC after: 3 days
written to the audit trail file:
- audit_record_write() now returns void, and all file system specific
error handling occurs inside this function. This pushes error handling
complexity out of the record demux routine that hands off to both the
trail and audit pipes, and makes trail behavior more consistent with
pipes as a record destination.
- Rate limit kernel printfs associated with running low on space. Rate
limit audit triggers for low space. Rate limit printfs for fail stop
events. Rate limit audit worker write error printfs.
- Document in detail the types of limits and space checks we perform, and
combine common cases.
This improves the audit subsystems tolerance to low space conditions by
avoiding toasting the console with printfs are waking up the audit daemon
continuously.
MFC after: 3 days
Obtained from: TrustedBSD Project
when allocating the record in the first place, allocate the final buffer
when closing the BSM record. At that point, more size information is
available, so a sufficiently large buffer can be allocated.
This allows the kernel to generate audit records in excess of
MAXAUDITDATA bytes, but is consistent with Solaris's behavior. This only
comes up when auditing command line arguments, in which case we presume
the administrator really does want the data as they have specified the
policy flag to gather them.
Obtained from: TrustedBSD Project
MFC after: 3 days
audit pipes. If the kernel record was not selected for the trail or the pipe,
any user supplied record attached to it would be tossed away, resulting in
otherwise selected events being lost.
- Introduce two new masks: AR_PRESELECT_USER_TRAIL AR_PRESELECT_USER_PIPE,
currently we have AR_PRESELECT_TRAIL and AR_PRESELECT_PIPE, which tells
the audit worker that we are interested in the kernel record, with
the additional masks we can determine if either the pipe or trail is
interested in seeing the kernel or user record.
- In audit(2), we unconditionally set the AR_PRESELECT_USER_TRAIL and
AR_PRESELECT_USER_PIPE masks under the assumption that userspace has
done the preselection [1].
Currently, there is work being done that allows the kernel to parse and
preselect user supplied records, so in the future preselection could occur
in either layer. But there is still a few details to work out here.
[1] At some point we need to teach au_preselect(3) about the interests of
all the individual audit pipes.
This is a RELENG_6 candidate.
Reviewed by: rwatson
Obtained from: TrustedBSD Project
MFC after: 1 week
Add the argument auditing functions for argv and env.
Add kernel-specific versions of the tokenizer functions for the
arg and env represented as a char array.
Implement the AUDIT_ARGV and AUDIT_ARGE audit policy commands to
enable/disable argv/env auditing.
Call the argument auditing from the exec system calls.
Obtained from: TrustedBSD Project
Approved by: rwatson (mentor)
audit record size at run-time, which can be used by the user
process to size the user space buffer it reads into from the audit
pipe.
Perforce change: 105098
Obtained from: TrustedBSD Project
progress the kernel audit code in CVS is considered authoritative.
This will ease $P4$-related merging issues during the CVS loopback.
Obtained from: TrustedBSD Project
- Correct audit_arg_socketaddr() argument name from so to sa.
- Assert arguments are non-NULL to many argument capture functions
rather than testing them. This may trip some bugs.
- Assert the process lock is held when auditing process
information.
- Test currecord in several more places.
- Test validity of more arguments with kasserts, such as flag
values when auditing vnode information.
Perforce change: 98825
Obtained from: TrustedBSD Project
whether we have an IPv6 address. Write the term ID as 4 or
16 bytes depending on address type. This change matches the recent
OpenBSM change, and what Solaris does.
Obtained from: TrustedBSD Project
Approved by: rwatson (mentor)
get a consistent snapshot, as well as get consistent values (i.e.,
that p_comm is properly nul-terminated).
Perforce CID: 98824
Obtained from: TrustedBSD Project
process was sucessfully audited. Otherwise, generate the PID
token. This change covers the pid < 0 cases, and pid lookup
failure cases.
Submitted by: wsalamon
Obtained from: TrustedBSD Project
