6879 incorrect endianness swap for drr_spill.drr_length in libzfs_sendrecv.c
illumos/illumos-gate@20fea7a474https://github.com/illumos/illumos-gate/commit/20fea7a47472aceb64d3ed48cc2a3ea26
8bc4795
https://www.illumos.org/issues/6879
In libzfs_sendrecv, there's a typo:
case DRR_SPILL:
if (byteswap) {
drr->drr_u.drr_write.drr_length =
BSWAP_64(drr->drr_u.drr_spill.drr_length);
}
Instead of drr_write.drr_length, we should be assigning the result of the
byteswap to drr_spill.drr_length.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Dan Kimmel <dan.kimmel@delphix.com>
illumos/illumos-gate@4a20c933b1https://github.com/illumos/illumos-gate/commit/4a20c933b148de8a1c1d3538391c64284
e636653
https://www.illumos.org/issues/6111
If you create a zfs child folder, zfs send returns an error when a recursive
incremental send is done between two snapshots made prior to the folder
creation.
The problem can be reproduced with the following steps.
root@zfs:/# zfs create pool/test
root@zfs:/# zfs snapshot pool/test@snap1
root@zfs:/# zfs snapshot pool/test@snap2
root@zfs:/# zfs create pool/test/child
root@zfs:/# zfs send -R -I pool/test@snap1 pool/test@snap2 > /dev/null
WARNING: could not send pool/test/child@snap2: does not exist
WARNING: could not send pool/test/child@snap2: does not exist
root@zfs:/# echo $?
1
root@zfs:/# zfs snapshot -r pool/test@snap3
root@zfs:/# zfs send -R -I pool/test@snap1 pool/test@snap3 > /dev/null
root@zfs:/# echo $?
0
root@zfs:/# zfs send -R -I pool/test@snap2 pool/test@snap3 > /dev/null
root@zfs:/# echo $?
0
Since pool/test/child was created after snap2, zfs send should not expect snap2
to be in pool/test/child when doing a recursive send. It should examine the
compare the creation time of the snapshot and each child folder to decide if
the folder will be sent. The next incremental send between snap2 and snap3
would properly create the child folder and snap3 which first appears in the
child folder.
The problem is identical if '-i' is used instead of '-I'.
Reviewed by: Alex Aizman alex.aizman@nexenta.com
Reviewed by: Alek Pinchuk alek.pinchuk@nexenta.com
Reviewed by: Roman Strashkin roman.strashkin@nexenta.com
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Alex Deiter <alex.deiter@nexenta.com>
6902 speed up listing of snapshots if requesting name only and sorting by name
This was our change from the beginning, so just reduce the upstream diff.
6876 Stack corruption after importing a pool with a too-long name
illumos/illumos-gate@c971037baac971037baahttps://www.illumos.org/issues/6876
Calling dsl_dataset_name on a dataset with a 256 byte buffer is asking for
trouble. We should check every dataset on import, using a 1024 byte buffer and
checking each time to see if the dataset's new name is longer than 256 bytes.
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Paul Dagnelie <pcd@delphix.com>
Previously, ctf_member_info() would ignore members belonging to an
anonymous struct or union. This made it impossible to, for example, trace
the m_next field of an mbuf using DTrace.
Reported and tested by: gallatin
MFC after: 2 weeks
There are two cases where changing canmount should result in an action:
- canmount is set to off for a mounted filesystem
- canmount is set to on for an unmounted filesystem
Before r297521 we could unmount and re-mount a filesystem when that was
not necessary, but after r297521 we only handled the first of the above
cases.
MFC after: 5 days
Have it print the contents of aggregations, if any. Otherwise, one needs to
kill the running script to view the collected data, or add code to
periodically print it.
Discussed with: gnn
MFC after: 1 month
7085 add support for "if" and "else" statements in dtrace
illumos/illumos-gate@c3bd3abd88
Add syntactic sugar to dtrace: "if" and "else" statements. The sugar is
baked down to standard dtrace features by adding additional clauses with
the appropriate predicates.
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Bryan Cantrill <bryan@joyent.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 2 weeks
Relnotes: yes
This resolves a -Wformat issue when the value is used as a format width
precision specifier, i.e. %*s
MFC after: 1 month
Reported by: clang
Sponsored by: EMC / Isilon Storage Division
Note: conversion of the manual page change from roff to mdoc is mine.
illumos/illumos-gate@b702644a6eb702644a6ehttps://www.illumos.org/issues/7164
If the pool/dataset command-line argument is specified with a trailing
slash, for example, "tank/", we should interpret it as the topmost
dataset (rather than the whole pool)
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Tim Chase <tim@chase2k.com>
PR: 204661
MFC after: 1 week
Relnotes: yes
illumos/illumos-gate@ae24175b2bae24175b2bhttps://www.illumos.org/issues/6391
When using zdb with non-default SPA config file it is not convenient
to add -U <non-default-config-file-path> all the time. This commit
introduces support for setting/overriding SPA config location via
environment variable 'SPA_CONFIG_PATH'.
If -U flag is specified in the command line it will override any other
value as usual.
64d7b6cf75
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Richard Yao <ryao@gentoo.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Cyril Plisko <cyril.plisko@mountall.com>
MFC after: 1 week
The DTraceToolkit is part of the Open DTrace effort and is supported
on FreeBSD as a port (sysutils/DTraceToolkit) which has been updated
to properly track toolkit development upstream.
Sponsored by: DARPA, AFRL
illumos/illumos-gate@26455f9efc26455f9efchttps://www.illumos.org/issues/6052
At the moment type parameter of lzc_create() is of dmu_objset_type_t type.
That exposes an implementation detail and requires sys/fs/zfs.h to be included
in libzfs_core.h creating unnecessary coupling between libzfs_core interface
and ZFS internals.
I think that dmu_objset_type_t should be replaced with a libzfs_core
enumeration of supported dataset types.
For ABI reasons the new enumeration could be bit-compatible with
dmu_objset_type_t.
For example:
typedef enum {
LZC_DST_ZFS = 2,
LZC_DST_ZVOL
} lzc_dataset_type_t;
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Andriy Gapon <andriy.gapon@clusterhq.com>
MFC after: 2 weeks
Sponsored by: ClusterHQ
This allows one to enable DTrace probes relatively early during boot,
during SI_SUB_DTRACE_ANON, before dtrace(1) can invoked. The desired
enabling is created using dtrace -A, which writes a /boot/dtrace.dof
file and uses nextboot(8) to ensure that DTrace kernel modules are loaded
and that the DOF file describing the enabling is loaded by loader(8)
during the subsequent boot. The trace output can then be fetched with
dtrace -a.
With this commit, boot-time DTrace is only functional on i386 and amd64: on
other architectures, the high-resolution timer frequency is initialized
during SI_SUB_CLOCKS and is thus not available when the anonymous
tracing state is initialized. On x86, the TSC is used and is thus available
earlier.
MFC after: 1 month
Relnotes: yes
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Author: Will Andrews <will@firepipe.net>
Closes#83Closes#32openzfs/openzfs@9663688425
FreeBSD already had `zpool labelclear` functionality, so this is mostly
just a diff reduction.
MFC after: 1 month
Previously this operation tried to unmount and remount children.
Also see https://www.illumos.org/issues/6428.
MFC after: 2 weeks
X-Needs-Upstreaming: illumos
When force-receiving a filesystem that was already mounted the re-created
filesystem is mounted despite -u flag.
Also see https://www.illumos.org/issues/6412.
PR: 204705
Tested by: Vladimir Krstulja <vlad-fbsd@acheronmedia.com>
MFC after: 2 weeks
X-Needs-Upstreaming: illumos
6739 userland version of cv_timedwait_hires() always assumes absolute time
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: George Wilson <george.wilson@delphix.com>
illumos/illumos-gate@41c6413cb5
calloc(3) is faster and occasionally safer than malloc(3) + bzero(3).
In one case, pointed out by Mark[1], this also cleans up a calculation.
Reviewed by: markj [1]
MFC after: 1 week
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: Toomas Soome <tsoome@me.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Author: Joshua M. Clulow <jmc@joyent.com>
illumos/illumos-gate@b211eb9181
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Gerhard Roethlin <git@the-color-black.net>
illumos/illumos-gate@cb605c4d8a
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Igor Kozhukhov <ikozhukhov@gmail.com>
illumos/illumos-gate@c16bcc4577
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Prakash Surya <prakash.surya@delphix.com>
illumos/illumos-gate@97e8130957
Currently, zfs(8) and zpool(8) print "invalid type '(null)'" or similar
messages, if you pass in invalid types, sources or column names for "zfs
get", "zfs list" and "zpool get". This is because the commands use
getsubopt(3), and in case of failure, they print 'value', which is NULL
when sub options don't match.
They should print 'suboptarg' instead, which is the documented way to
get at the non-matching sub option value.
Reviewed by: smh
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D5365
exceeds refquota
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Gordon Ross <gordon.ross@nexenta.com>
Author: Dan McDonald <danmcd@omniti.com>
illumos/illumos-gate@5878fad70d
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Paul Dagnelie <pcd@delphix.com>
illumos/illumos-gate@68ecb2ec93
This allows to do a full (non-incremental send) and receive it as a clone
of an existing dataset. It can leverage nopwrite to share blocks with the
origin. This can be used to change the relationship of datasets on the
target. For example, maybe on the source you have:
A ---- B ---- C
And you have sent to the target a full of B, and the incremental B->C:
B ---- C
You later realize that you want to have A on the target. You will have to
do a full send of A, but nopwrite can save you space on the target if you
receive it as a clone of B, assuming that A and B have some blocks inxi
common:
B ---- C
\
A
If the zfs module is not present and not loadable, report an error
to the user instead of crashing
Reviewed by: mahrens
Sponsored by: Gandi.net
Differential Revision: https://reviews.freebsd.org/D4691
r281257 added support for lazyload mode by allowing dtrace(1) to register
a DOF section on behalf of a traced process. This was implemented by
having libdtrace copy the DOF section into a heap-allocated buffer and
passing its address to the ioctl handler. However, DTrace uses the DOF
section address as a lookup key in certain cases, so the ioctl handler
should be given the target process' DOF section address instead. This
change modifies the ADDDOF handler to copy the DOF section in from the
target process, rather than from dtrace(1).
