(TF_OPENED_CONS) were broken in r188147 by adding TF_OPENED_CONS
without updating the string. It was especially confusing to display
OPENED_CONS as GONE and BYPASS as ZOMBIE. 2 flags at the end were
not updated in r188487.
Don't print an extra 0x prefix for %p in a ddb command. In the rest
of the kernel there are more than 6000 lines with %p and only about
40 with this bug.
Print a non-extra 0x prefix for %b in a ddb command. In the rest
of the kernel, there are approx. 180 lines with %b and 2/3 of them
have this bug.
Submitted by: bde
MFC after: 2 weeks
Rename gic_v3_ instances to simply use 'gic' and 'its'.
The information about the controller's revision is printed
in the device announcement during boot anyway.
The intention behind this change is to avoid somewhat misleading
GIC instances naming such as:
gic_v30
gic_v31
...
etc.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5016
Avoid probing GICv2m to any parent bus/driver. Instead, match
GICv2m driver with FDT complatible strings as not every GIC
has a MSI controller in the form of GICv2m extension.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5015
Currently when the OF_getprop() function returns with error,
the caller (OF_getencprop()) still changes the buffer endiannes.
This may destroy the default value passed in the input buffer if
used on a Little Endian platform.
Reviewed by: mmel
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Obtained from: Semihalf
Sponsored by: Cavium
Even if data cache maintenance was done by IO code, the relocation
fixup process creates dirty cache entries that we must write back
before doing icache sync.
Reported by: Thiagarajan Venkatasubramanian <tvenkata at juniper.net>
Reviewed by: ian
pmap implementations on ARM. This way minidump code can be used without
any platform specific modification.
Also, this is the last piece missing for ARM_NEW_PMAP.
Differential Revision: https://reviews.freebsd.org/D5023
There are number of radix consumers in kernel land (pf,ipfw,nfs,route)
with different requirements. In fact, first 3 don't have _any_ requirements
and first 2 does not use radix locking. On the other hand, routing
structure do have these requirements (rnh_gen, multipath, custom
to-be-added control plane functions, different locking).
Additionally, radix should not known anything about its consumers internals.
So, radix code now uses tiny 'struct radix_head' structure along with
internal 'struct radix_mask_head' instead of 'struct radix_node_head'.
Existing consumers still uses the same 'struct radix_node_head' with
slight modifications: they need to pass pointer to (embedded)
'struct radix_head' to all radix callbacks.
Routing code now uses new 'struct rib_head' with different locking macro:
RADIX_NODE_HEAD prefix was renamed to RIB_ (which stands for routing
information base).
New net/route_var.h header was added to hold routing subsystem internal
data. 'struct rib_head' was placed there. 'struct rtentry' will also
be moved there soon.
The page information array could contain up to 32 elements (i.e. 512B).
And on network side w/ TSO, 11+ (176B+) elements, i.e. ~44K TSO packet,
in the page information array is quite common.
This saves us some cpu cycles.
Reviewed by: adrian, delphij
Approved by: adrian (mentor)
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D4992
According to all available information, VMSWITCH always does the
TCP segment checksum verification before sending the segment to
guest.
Reviewed by: adrian, delphij, Hongjiang Zhang <honzhan microsoft com>
Approved by: adrian (mentor)
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D4991
All used fields are setup one by one, so there is no need to zero
out this large struct.
While I'm here, move the stack variable near its usage.
Reviewed by: adrian, delphij, Jun Su <junsu microsoft com>
Approved by: adrian (mentor)
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D4978
While I'm here, move stack variables near their usage.
Reviewed by: adrian, delphij, Jun Su <junsu microsoft com>
Approved by: adrian (mentor)
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D4977
- Avoid unnecessary malloc/free on transmission path.
- busdma(9)-fy transmission path.
- Properly handle IFF_DRV_OACTIVE. This should fix the network
stalls reported by many.
- Properly setup TSO parameters.
- Properly handle bpf(4) tapping. This 5 times the performance
during TCP sending test, when there is one bpf(4) attached.
- Allow size of chimney sending be tuned on a running system.
Default value still needs more test to determine.
Reviewed by: adrian, delphij
Approved by: adrian (mentor)
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D4972
STT_SPARC_REGISTER is a SPARC-specific symbol type specified by the
Sparcv9 ABI to provide some information on register use by the object.
Also rework st_info type lookup to avoid out-of-bounds array access.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
* Use the ARM PLATFORM framework
* Use ARM_INTRNG on teh A20 as it has a GICv2
* Add a method to find which Allwinner SoC we are running on
Differential Revision: https://reviews.freebsd.org/D5059
Use malloc(9) for
- struct ieee80211req_wpaie2 (518 bytes, used in
ieee80211_ioctl_getwpaie())
- struct ieee80211_scan_req (128 bytes, used in setmlme_assoc_adhoc()
and ieee80211_ioctl_scanreq())
Also, drop __noinline workarounds; stack overflow is not reproducible
with recent compilers.
Tested with Clang 3.7.1, GCC 4.2.1 (from 9.3-RELEASE) and 4.9.4
(with -fstack-usage flag)
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D5041
Do not duplicate code between IEEE80211_IOC_WPAIE and IEEE80211_IOC_WPAIE2
switch cases.
Approved by: adrian (mentor)
Differential Revision: D5041 (part)
In general we don't trust any of the extended timestamps unless the
EXT2F_ROCOMPAT_EXTRA_ISIZE feature is set. However, in the case where
we freshly allocated a new inode the information is valid and it is
better to pass it along instead of leaving the value undefined.
This should have no practical effect but should reduce the amount of
garbage if EXT2F_ROCOMPAT_EXTRA_ISIZE is set, like in cases where the
filesystem is converted from ext3 to ext4.
MFC after: 4 days
Forbid (temporary or permanent) modifications of the strings in NARG nodes
during expansion.
Tilde expansion now needs to copy the username for the terminating '\0'.
by application closing its stdin (i.e. STDIN_FILENO) prior to
calling readpassphrase WITHOUT setting RPP_STDIN. What happens
then is that the readpassphrase would open /dev/tty, and since
file descriptors are reused, the call would return first unused
fd, which is 0 which is also STDIN_FILENO. Then due to the usage
of "input != STDIN_FILENO" in the code to do its logic, that
would result in noecho flags not set on that file descriptor,
which was original issue I've been trying to fix.
In addition to that, the readpassphrase() would leak file
descriptor on its way out, so fix that one as well.
This problem can be tested with:
$ ssh-add - < /tmp/myprivate.key
The password will not be hidden as it should and ktrace will
show:
53326 ssh-add CALL open(0x80142443c,0x100002<O_RDWR|O_CLOEXEC>,<unused>0x165f030)
53326 ssh-add NAMI "/dev/tty"
53326 ssh-add RET open 0
53326 ssh-add CALL sigprocmask(SIG_SETMASK,0x802eb1324,0x7fffffffd5e0)
53326 ssh-add RET sigprocmask 0
53326 ssh-add CALL sigaction(SIGALRM,0x7fffffffd630,0x7fffffffd610)
Instead of:
57690 ssh-add CALL open(0x80142443c,0x100002<O_RDWR|O_CLOEXEC>,<unused>0x165f030)
57690 ssh-add NAMI "/dev/tty"
57690 ssh-add RET open 4
57690 ssh-add CALL ioctl(0x4,TIOCGETA,0x7fffffffd860)
57690 ssh-add RET ioctl 0
57690 ssh-add CALL ioctl(0x4,TIOCSETAF,0x7fffffffd680)
57690 ssh-add RET ioctl 0
57690 ssh-add CALL sigprocmask(SIG_SETMASK,0x802eb1324,0x7fffffffd620)
57690 ssh-add RET sigprocmask 0
57690 ssh-add CALL sigaction(SIGALRM,0x7fffffffd670,0x7fffffffd650)
For the case when the key is read from the file.
Technically this can also be workaround'ed at the application side
by not closing the STDIN_FILENO in the first place, but readpassphrase(3)
doesn't need to make any assumptions about that. Plus the file descriptor
leak confirms that this is an oversight, rather than a deliberate behaviour.
MFC after: 1 week
support frameworks (i.e. regulators/phy/tsensors/fuses...).
It provides simple unified consumers interface for manipulations with
on-chip resets.
Reviewed by: ian, imp (paritaly)
support frameworks(i.e. reset/regulators/phy/tsensors/fuses...).
The clock framework significantly simplifies handling of complex clock
structures found in modern SoCs. It provides the unified consumers
interface, holds and manages actual clock topology, frequency and gating.
It's tested on three different ARM boards (Nvidia Tegra TK1, Inforce 6410 and
Odroid XU2) and on one MIPS board (Creator Ci20) by kan@.
The framework is still far from perfect and probably doesn't have stable
interface yet, but we want to start testing it on more real boards and
different architectures.
Reviewed by: ian, kan (earlier version)
Directory index was introduced in ext3. We don't always use the
prefix to denote the ext2 variant they belong to but when we
do we should try to be accurate.
We use i_flag to carry some flags like IN_E4INDEX which newer
ext2fs variants uses internally.
fsck.ext3 rightfully complains after our implementation tags
non-directory inodes with INDEX_FL.
Initializing i_flag during allocation removes the noise factor
and quiets down fsck.
Patch from: Damjan Jovanovic
PR: 206530
Per POSIX, 'cd -' should use the OLDPWD shell variable, not internal state.
This variable is normally exported.
Also, if OLDPWD is not set, fail 'cd -' instead of changing to the current
directory.