protect all linker-related data structures including the contents of
linker file objects and the any linker class data as well. Considering how
rarely the linker is used I just went with the simple solution of
single-threading the whole thing rather than expending a lot of effor on
something more fine-grained and complex. Giant is still explicitly
acquired while registering and deregistering sysctl's as well as in the
elf linker class while calling kmupetext(). The rest of the linker runs
without Giant unless it has to acquire Giant while loading files from a
non-MPSAFE filesystem.
means:
o Remove Elf64_Quarter,
o Redefine Elf64_Half to be 16-bit,
o Redefine Elf64_Word to be 32-bit,
o Add Elf64_Xword and Elf64_Sxword for 64-bit entities,
o Use Elf_Size in MI code to abstract the difference between
Elf32_Word and Elf64_Word.
o Add Elf_Ssize as the signed counterpart of Elf_Size.
MFC after: 2 weeks
before dereferencing it. Certain corrupt kernel modules might not have
a valid hash table, and would cause a kernel panic when they were loaded.
Instead of panic'ing, the kernel now prints out a warning that it is
missing the symbol hash table.
Tested by: Benjamin Close Benjamin dot Close at clearchain dot com
MFC after: 1 week
While here, support up to four sections because it was trivial to do
and cheap. (One pointer per section).
For amd64 with "-fpic -shared" format .ko files, using a single PT_LOAD
section is important to avoid wasting about 1MB of KVM and physical ram
for the 'gap' between the two PT_LOAD sections. amd64 normally uses
.o format kld files and isn't affected normally. But -fpic -shared modules
are actually possible to produce and load... (And with a bugfix to
binutils, we can build and use plain -shared .ko files without -fpic)
i386 only wastes 4K per .ko file, so that isn't such a big deal there.
but vm_map_wire() fails, then a vm object, vm map entries, and kernel_map
free space is leaked and (2) unwiring is handled automatically by
vm_map_remove().
Suggested by: tegge
Add a MOD_QUIESCE event for modules. This should return error (EBUSY)
of the module is in use.
MOD_UNLOAD should now only fail if it is impossible (as opposed to
inconvenient) to unload the module. Valid reasons are memory references
into the module which cannot be tracked down and eliminated.
When kldunloading, we abandon if MOD_UNLOAD fails, and if -force is
not given, MOD_QUIESCE failing will also prevent the unload.
For backwards compatibility, we treat EOPNOTSUPP from MOD_QUIESCE as
success.
Document that modules should return EOPNOTSUPP for unknown events.
of kmupetext(). The declaration is misplaced in <machine/profile.h>
since it is not MD and not related to the lowest level of profiling.
It will be moved, but getting it via <sys/gmon.h> already works.
elf_reloc() backends for two reasons. First, to support the possibility
of there being two elf linkers in the kernel (eg: amd64), and second, to
pass the relocbase explicitly (for relocating .o format kld files).
- All those diffs to syscalls.master for each architecture *are*
necessary. This needed clarification; the stub code generation for
mlockall() was disabled, which would prevent applications from
linking to this API (suggested by mux)
- Giant has been quoshed. It is no longer held by the code, as
the required locking has been pushed down within vm_map.c.
- Callers must specify VM_MAP_WIRE_HOLESOK or VM_MAP_WIRE_NOHOLES
to express their intention explicitly.
- Inspected at the vmstat, top and vm pager sysctl stats level.
Paging-in activity is occurring correctly, using a test harness.
- The RES size for a process may appear to be greater than its SIZE.
This is believed to be due to mappings of the same shared library
page being wired twice. Further exploration is needed.
- Believed to back out of allocations and locks correctly
(tested with WITNESS, MUTEX_PROFILING, INVARIANTS and DIAGNOSTIC).
PR: kern/43426, standards/54223
Reviewed by: jake, alc
Approved by: jake (mentor)
MFC after: 2 weeks
metadata. This fixes module dependency resolution by the kernel linker on
sparc64, where the relocations for the metadata are different than on other
architectures; the relative offset is in the addend of an Elf_Rela record
instead of the original value of the location being patched.
Also fix printf formats in debug code.
Submitted by: Hartmut Brandt <brandt@fokus.gmd.de>
PR: 46732
Tested on: alpha (obrien), i386, sparc64
checks permit policy modules to augment the system policy for permitting
kld operations. This permits policies to limit access to kld operations
based on credential (and other) properties, as well as to perform checks
on the kld being loaded (integrity, etc).
Approved by: re
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
The primary reason for this is to allow MD code to process machine
specific attributes, segments or sections in the ELF file and
update machine specific state accordingly. An immediate use of this
is in the ia64 port where unwind information is updated to allow
debugging and tracing in/across modules. Note that this commit
does not add the functionality to the ia64 port. See revision 1.9
of ia64/ia64/elf_machdep.c.
Validated on: alpha, i386, ia64
link_elf_init(), link_elf_link_preload_finish() and
link_elf_load_file() to link_elf_link_common_finish().
Since link_elf_init() did initializations as a side-effect
of doing the common actions, keep the initialization in
that function. Consequently, link_elf_add_gdb() is now also
called to insert the very first link_map() (ie the kernel).
Move link_elf_add_gdb(), link_elf_delete_gdb() and link_elf_error()
near the top of the file. The *_gdb() functions are moved inside
the #ifdef DDB already present there.
cannot allocate ef->object, we freed ef before bailing out with
an error. This is wrong because ef=lf and when we have an error
and lf is non-NULL (which holds if we try to alloc ef->object),
we free lf and thus ef as part of the bailing-out.
were improperly relocated due to faulty logic in lookup_fdesc()
in elf_machdep.c. The symbol index (symidx) was bogusly used for
load modules other than the one the relocation applied to. This
resulted in bogus bindings and consequently runtime failures.
The fix is to use the symbol index only for the module being
relocated and to use the symbol name for look-ups in the
modules in the dependent list. As such, we need a function to
return the symbol name given the linker file and symbol index.
sparc v9 ABI. The Elf_Rela records for local symbols appear to already
have the symbol's value added in to the addend field, even though the ABI
specifies we need to lookup the symbol and add its value too. This breaks
text relocations in klds because the symbol's value is added twice, and
the resulting address points off into nowhere land, so for now just use
the addend.
Tested by: rwatson
under way to move the remnants of the a.out toolchain to ports. As the
comment in src/Makefile said, this stuff is deprecated and one should not
expect this to remain beyond 4.0-REL. It has already lasted WAY beyond
that.
Notable exceptions:
gcc - I have not touched the a.out generation stuff there.
ldd/ldconfig - still have some code to interface with a.out rtld.
old as/ld/etc - I have not removed these yet, pending their move to ports.
some includes - necessary for ldd/ldconfig for now.
Tested on: i386 (extensively), alpha
a pointer to a symbol is given and we have to find the containing symbol
table. We do this by bounds checking. For some strange reason (ie I
haven't found the root cause) the first test succeeded for said symbol,
implying that the symbol came from the .dynsym table. In reality however
the symbol actually resided in the .symtab table. Needless to say that
all that was returned was junk.
The upper bounds check was: (symptr - baseptr) < symtab_size
This has been rewritten to: symptr < (baseptr + symtab_size)
As a side-effect, slightly more optimal (and still correct :-) code can
be generated on ia64.
make a series of modifications to the credential arguments relating
to file read and write operations to cliarfy which credential is
used for what:
- Change fo_read() and fo_write() to accept "active_cred" instead of
"cred", and change the semantics of consumers of fo_read() and
fo_write() to pass the active credential of the thread requesting
an operation rather than the cached file cred. The cached file
cred is still available in fo_read() and fo_write() consumers
via fp->f_cred. These changes largely in sys_generic.c.
For each implementation of fo_read() and fo_write(), update cred
usage to reflect this change and maintain current semantics:
- badfo_readwrite() unchanged
- kqueue_read/write() unchanged
pipe_read/write() now authorize MAC using active_cred rather
than td->td_ucred
- soo_read/write() unchanged
- vn_read/write() now authorize MAC using active_cred but
VOP_READ/WRITE() with fp->f_cred
Modify vn_rdwr() to accept two credential arguments instead of a
single credential: active_cred and file_cred. Use active_cred
for MAC authorization, and select a credential for use in
VOP_READ/WRITE() based on whether file_cred is NULL or not. If
file_cred is provided, authorize the VOP using that cred,
otherwise the active credential, matching current semantics.
Modify current vn_rdwr() consumers to pass a file_cred if used
in the context of a struct file, and to always pass active_cred.
When vn_rdwr() is used without a file_cred, pass NOCRED.
These changes should maintain current semantics for read/write,
but avoid a redundant passing of fp->f_cred, as well as making
it more clear what the origin of each credential is in file
descriptor read/write operations.
Follow-up commits will make similar changes to other file descriptor
operations, and modify the MAC framework to pass both credentials
to MAC policy modules so they can implement either semantic for
revocation.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
the symbol index defined by the relocation. The elf_lookup() support
function is to be used by elf_reloc() when symbol lookups need to be
done. The elf_lookup() function operates on the symbol index and
will do a symbol name based lookup when such is required, otherwise
it uses the symbol index directly. This solves the problem seen on
ia64 where the symbol hash table does not contain local symbols and
a symbol name based lookup would fail for those symbols.
Don't pass the symbol name to elf_reloc(), as it isn't used any more.
the DT_PLTGOT value. On ia64 this is the value of GP. We need this
to construct function descriptors, but the elf file structure is
not exported to MD code.
Note that the name of the function is based on the meaning that
DT_PLTGOT has on ia64. This may differ on other architectures. As
such, link_elf_get_gp() has a high level of MD to it. Renaming the
function to describe what DT_* value is returned makes it generic,
but also makes the MD code less clear and if we only need this on
ia64, then a general name for a specific function doesn't help.
In short: I don't know what is "right" at this time, so I'll go
with what I have.
function symbols in the kernel in a list of C strings, with an extra
nul-termination at the end.
This sysctl requires addition of a new linker operation. Now,
linker_file_t's need to respond to "each_function_name" to export
their function symbols.
Note that the sysctl doesn't currently allow distinguishing multiple
symbols with the same name from different modules, but could quite
easily without a change to the linker operation. This will be a nicety
to have when it can be used.
Obtained from: NAI Labs CBOSS project
Funded by: DARPA
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.
Sorry john! (your next MFC will be a doosie!)
Reviewed by: peter@freebsd.org, dillon@freebsd.org
X-MFC after: ha ha ha ha
and I still dont know why, this was not failing on the non-kse kernel.
It certainly should have since things were using linker_kernel_file
unconditionally. This has highlighted a different problem though that
means that trying to do a kldload on a non-dynamic kernel will implode.
structure is always free()ed yet only sometimes malloc()ed. In particular,
it was simply set to point to l_filename from the a linker_file_t in
link_elf_link_preload_finish(). The l_filename had been malloc()ed inside
the kern_linker.c module and was being free()ed twice: once by
link_elf_unload_file() and again by linker_file_unload(), leading to
a panic.
How to duplicate the problem:
- Pre-load a kernel module from the loader, i.e. if_sis.ko
- Boot system
- Attempt to unload module with kldunload if_sis
- Bewm
The problem here is that the case where the module was loaded with kldload
after system boot would work correctly, so this bug went unnoticed until
I stubbed my toe on it just now. (Also, you can only trip this bug if
you compile a kernel with options DDB, but that's the default now.)
Fix: remember to malloc() a separate copy of the module name for the
l_name member of the gdb linkage structure in three places where the
linkage structure can be initialized.
filename passed in via the module loader functions in the GDB
"sharedlibrary" support structures. This isn't good, since the pointer
would become stale in almost every case (not the pre-loaded case, of
course).
Change this to malloc()ed copy of the string and finally fix the reason
that gdb -k's "sharedlibrary" command stopped working.
Obtained from: LOMAC/FreeBSD (cf. NAI Labs)
dynamic symbol table buckets and chains. The sparc64 toolchain uses 32
bit .hash entries, unlike other 64 bits architectures (alpha), which use
64 bit entries.
Discussed with: dfr, jdp
