It is wrong to relate on __FreeBSD_version, either from
include/param.h, kernel, or libc, to check for rtld features.
Rtld might be from newer world than the running userspace.
Add special private symbols exported by rtld itself, to indicate the
changes in runtime behavior, and features that cannot be otherwise
detected or deduced at runtime.
Note that the symbols are not exported from libc, so they intentionally
cannot be linked against, and exported from the private namespace from rtld.
Consumers are required to use dlsym(3). For instance, for
_rtld_version_laddr_offset, user should do
ptr = dlsym(RTLD_DEFAULT, "_rtld_version_laddr_offset")
or even
ptr = dlvsym(RTLD_DEFAULT, "_rtld_version_laddr_offset",
"FBSDprivate_1.0");
Non-null ptr means that the change is present.
Also add _rtld_version__FreeBSD_version indicator to report the
headers version used at time of the rtld build.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D24982
Keep link_map l_addr binary layout compatible, rename l_addr to l_base
where rtld returns map base. Provide relocbase in newly added l_addr.
This effectively reverts the patch to the initial version of D24918.
Reported by: antoine (portmgr)
Reviewed by: jhb, markj
Tested by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D24946
It previously returned the object map base address, while all other
ELF operating systems return load offset, i.e. the difference between
map base and the link base.
Explain the meaning of the field in the man page.
Stop filling the mips-only l_offs member, which is apparently unused.
PR: 246561
Requested by: Damjan Jovanovic <damjan.jov@gmail.com>
Reviewed by: emaste, jhb, cem (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D24918
Prior to this change, using lagg to aggregate wired and wireless networks
was broken in the (relatively common) case where wifi drivers + firmware
are loaded by devmatch, since the interface didn't exist at the time when
the lagg interface was being created.
Suggested by: imp
MFC after: 3 days
Assume gcc is at least 6.4, the oldest xtoolchain in the ports tree.
Assume clang is at least 6, which was in 11.2-RELEASE. Drop conditions
for older compilers.
Reviewed by: imp (earlier version), emaste, jhb
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D24802
Clang10 may use FPU instructions for optimizing operations with
memory blocks. But we don't want to do lengthy save/restore of all
FPU registers across each rtld_start() call.
MFC after: 3 week
For PIE binaries, ldd(1) performs dlopen(RTLD_TRACE) on the binary.
It is legal for binary to use initial exec TLS mode, but when such
binary (actually dso) is dlopened, we might not have enough free space
in the finalized static TLS segment. Make ldd operational by skipping
TLS space allocation, we are not going to execute any code from the
dso anyway.
Reported by: tobik
PR: 245677
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
instead of MK_KERBEROS. The reason for this change is some users
prefer to build FreeBSD WITHOUT_KERBEROS, wanting to retain the
Kerberos rc scripts to start/stop MIT Kerberos or Heimdal from ports.
PR: 197337
Reported by: Adam McDougall <ebay at looksharp.net>
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D24252
This is continuation of D21163/r359634, which handled the alignment
for global mode.
Non-x86 arches are not handled, maintainers are welcomed.
Tested by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D24366
The sshd service is using ssh-keygen to generate missing SSH keys.
If ssh-keygen is missing, it prints the following message:
> /etc/rc.d/sshd: WARNING: /usr/bin/ssh-keygen does not exist.
It makes sense when the key is not generated yet and
cannot be created because ssh-keygen is missing.
The problem is that even if the key is present on the host,
the sshd service would still warn about missing ssh-keygen
(even though it does not need it).
Reviewed by: emaste
Approved by: emaste (src)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D23911
This is mostly two problems spread out far and wide:
- ypldap_process should be declared properly
- debug is defined differently in many programs
For the latter, just extern it and define it everywhere that actually needs
it. This mostly works out nicely for ^/libexec/ypxfr, which can remove the
assignment at the beginning of main in favor of defining it properly.
-fno-common will become the default in GCC10/LLVM11.
MFC after: 3 days
See https://sourceware.org/bugzilla/show_bug.cgi?id=24606 for the test case.
See https://reviews.llvm.org/D64930 for the background and more discussion.
Also this fixes another bug in malloc_aligned() where total size of
the allocated memory might be not enough to fit the aligned requested
block after the initial pointer is incremented by the pointer size.
Reviewed by: bdragon
Tested by: antoine (exp-run PR 244866), bdragon, emaste
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D21163
The bootstrap flua should not be used for REPL-like activities; exclude it
to save the dependency on libedit and not waste time with it.
X-MFC-With: r359453
rc scripts arent configuration files so use FILES instead of CONFS.
While here put rc scripts into related package (sendmail in the FreeBSD-sendmail
package, wpa_supplicant in the FreeBSD-wpa etc ...)
Reviewed by: bapt, emaste
Differential Revision: https://reviews.freebsd.org/D24177
On UFS with SU+J, sometimes fsck's default recovery from journal marks the
filesystem as clean but some errors remain.
With SU only, default fsck in preen mode sometimes thinks all errors have
been fixed but some still remain.
To address the issues above, this change adds a new config option:
fsck_flags. By default it's set to -p, but the user may change it to -y
or -f -y, for instance, to force a full fsck after a system crash.
Submitted by: jhibbits@ (original version)
Reviewed by: mckusick
Differential Revision: https://reviews.freebsd.org/D24087
nsswitch.conf for backward compatibility. This file was used
over 19 years ago, before introducing nsdispatch() in the
name-service lookup APIs.
MFC after: 3 days
The new liblua will be used in a forthcoming import of kyua.
Reviewed by: kevans
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24090
Lua does not provide a native way to change the permission of a file.
Submitted by: Yang Wang <2333@outlook.jp>
Reviewed by: kevans
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24036
autofs was introduced with FreeBSD 10.1 and is the supported method for
automounting filesystems. As of r296194 the amd man page claimed that it
is deprecated. Remove it from base now; the sysutils/am-utils port is
still available if necessary.
Discussed with: cy
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
r358556 added alignas() use to the functional tests, which isn't defined
until C11. Raise the -std to C11 to fix the build under freebsd-gcc{6,9}.
Reported by: mhorne, Jenkins/CI
The windowsize option permits multiple blocks to be transmitted
before the receiver sends an ACK improving throughput for larger
files.
Reviewed by: asomers
MFC after: 2 weeks
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23836
realpath(3) is used a lot e.g., by clang and is a major source of getcwd
and fstatat calls. This can be done more efficiently in the kernel.
This works by performing a regular lookup while saving the name and found
parent directory. If the terminal vnode is a directory we can resolve it using
usual means. Otherwise we can use the name saved by lookup and resolve the
parent.
See the review for sample syscall counts.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D23574
lld 10.0 seems to generate this relocation for rdtsc_mb() ifunc in our libc.
Reported, reviewed, and tested by: dim (amd64, previous version)
Discussed with: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D23652
This allows for rtld to not issue two sigprocmask(2) syscalls for each
symbol binding operation in single-threaded processes. Rtld needs to
block signals as part of locking to ensure signal safety of the bind
process, because signal handlers might need to lazily resolve symbol
references.
As result, number of syscalls issued on startup by simple programs not
using libthr, is typically reduced 2x. For instance, for hello world,
I see:
non-sigfastblock
# (truss ./hello > /dev/null) |& wc -l
63
sigfastblock
# (truss ./hello > /dev/null) |& wc -l
37
Tested by: pho
Disscussed with: cem, emaste, jilles
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D12773
It's faster and more reliable to wait_for_pids than to sleep 1.
cem@ suggested just to remove auditd_stop() and use the rc.subr default
stop action (SIGTERM instead of audit -t), which has a built-in
wait_for_pids. That may be a better solution.
Discussed with: cem
Reviewed by: asomers
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D23223
They were introduced to take care of ifunc, but right now no architecture
provides ifunc'ed variants. Since rtld uses memset extensively this results in
a pessmization. Should someone want to use ifunc here they should provide a
mandatory symbol (e.g., rtld_memset).
See the review for profiling data.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D23176
Move all MD statements into $MACHINE_ARCH/Makefile.inc.
Unconditionally apply version script to rtld, the interpreter is not
functional without it for long time.
Reviewed by: brooks, emaste
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D23083
The path is already absolute.
Noted and reviewed by: rstone
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D23121
instead of killing the process. The same behaviour of terminating
image activation if the $ORIGIN cannot be resolved for the main
object, is kept.
Reported by: Greg V <greg@unrelenting.technology>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D23053
We know the binary relative name and can reliably calculate cwd path.
Because realpath(3) was already linked into ld-elf.so.1, reuse it
there to resolve dots and dotdots making the path more canonical.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D23014
People use rc.conf inside vnet jails to configure networking setups.
Presumably because some sysctl were not virtualised up until r356527 the
script was not run for vnet jails leaving the rc.conf options without
effect for non-obvious reasons. Run the netoptions startup script also
for VNET jails now to make the rc.conf options work.
PR: 243193
MFC after: 2 weeks
binpath local was changed from char array to a char pointer, update
strlcpy/strlcat uses.
Reported by: Coverity through vangyzen
CID: 1412239 and 1412240
Reviewed by: emaste, imp, vangyzen
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D23090
