is defined in sys/socket.h where it's defined as 28.
A bit of trivia: On NetBSD AF_INET6 is defined as 24. On Solaris it is
defined as 26. This is probably why Darren defaulted to 26, because
ipfilter was originally written for SunOS 4 and Solaris many moons ago.
MFC after: 2 weeks
The nvlist_append_{bool,number,string,nvlist,descriptor}_array() functions
allows to dynamically extend array stored in the nvlist.
Submitted by: Mindaugas Rasiukevicius <rmind@netbsd.org>
When we are removing element form the nvlist we should also clean parent,
because the array is not a part of the nvlist anymore.
Submitted by: Mindaugas Rasiukevicius <rmind@netbsd.org>
All information which are need for those operations is already stored in
the cookie.
We decided not to bump libnv version because this API is not used yet in the
base system.
Reviewed by: pjd
If we fail noise floor calibration then we may end up with a deaf NIC
which we can't recover without a full chip reset.
Earlier chips seem to get less stuck in this condition versus AR9280/later
and AR9300/later, but whilst here just fix up the AR5212 era chips to also
return NF calibration failures.
This HAL routine would only return failure if the channel was not configured.
This is a no-op until the driver side code for doing resets and the HAL
code for being told about the reset type (and then handling it!) is
implemented.
Tested:
* AR9280, STA mode
* AR2425, STA mode
* AR9380, STA mode
Plenty of allocation sites pass M_ZERO and sizes which are small and known
at compilation time. Handling them internally in malloc loses this information
and results in avoidable calls to memset.
Instead, let the compiler take the advantage of it whenever possible.
Discussed with: jeff
I'm in the process of reworking how the reset path works with an eye
to better recovery when the chips hang and/or go RF/PHY deaf.
This is the first step in a lot of unification and API changes.
* Change ena-com BIT macro to work on unsigned value.
To make the shifting operations safer, they should be working on
unsigned values.
* Fix a mutex not owned ASSERT panic in ENA control path.
A thread calling cv_broadcast()/cv_signal() must hold the mutex used for
cv_wait(). Fix the ENA control path code that has this problem.
Submitted by: Krishna Yenduri <kyenduri@brkt.com>
Reviewed by: Michal Krawczyk <mk@semihalf.com>
Tested by: Michal Krawczyk <mk@semihalf.com>
It should fix ck_pr_[load|store]_ptr on mips and riscv, make sure no
*fence instructions are used on i386, as older cpus don't support it, and
make sure we don't rely on gcc builtins that can lead to calls to
libatomic when linked with -O0.
MFC after: 1 week
Drop our local patch and restore full vanilla upstream code in
contrib/libb2.
No functional change intended. explicit_bzero() should continue to be used.
Obtained from: libb2 b4b241a34824b51956a7866606329a065d397525
Sponsored by: Dell EMC Isilon
Includes our local patch to conditionalize use of __builtin_clz(ll) on
Clang's __has_builtin() (which is just defined to false when building with
GCC).
The issue is tracked upstream at https://github.com/facebook/zstd/pull/884 .
Otherwise, these are vanilla Zstandard 1.3.4 files.
Reported by: allanjude, Yann Collet
Sponsored by: Dell EMC Isilon
The upstream repository is on github BLAKE2/libb2. Files landed in
sys/contrib/libb2 are the unmodified upstream files, except for one
difference: secure_zero_memory's contents have been replaced with
explicit_bzero() only because the previous implementation broke powerpc
link. Preferential use of explicit_bzero() is in progress upstream, so
it is anticipated we will be able to drop this diff in the future.
sys/crypto/blake2 contains the source files needed to port libb2 to our
build system, a wrapped (limited) variant of the algorithm to match the API
of our auth_transform softcrypto abstraction, incorporation into the Open
Crypto Framework (OCF) cryptosoft(4) driver, as well as an x86 SSE/AVX
accelerated OCF driver, blake2(4).
Optimized variants of blake2 are compiled for a number of x86 machines
(anything from SSE2 to AVX + XOP). On those machines, FPU context will need
to be explicitly saved before using blake2(4)-provided algorithms directly.
Use via cryptodev / OCF saves FPU state automatically, and use via the
auth_transform softcrypto abstraction does not use FPU.
The intent of the OCF driver is mostly to enable testing in userspace via
/dev/crypto. ATF tests are added with published KAT test vectors to
validate correctness.
Reviewed by: jhb, markj
Obtained from: github BLAKE2/libb2
Differential Revision: https://reviews.freebsd.org/D14662
Link __bswap[ds]i2() intrinsics in to libzstd for riscv, where the C runtime
apparently lacks such intrinsics.
Broken in r330894.
Reported by: asomers
Sponsored by: Dell EMC Isilon
Includes patch to conditionalize use of __builtin_clz(ll) on __has_builtin().
The issue is tracked upstream at https://github.com/facebook/zstd/pull/884 .
Otherwise, these are vanilla Zstandard 1.3.3 files.
Note that the 1.3.4 release should be due out soon.
Sponsored by: Dell EMC Isilon
Silence a Coverity warning about 'windowSize' being uninitialized.
(Yes, nothing that calls this routine actually uses the windowSize
value. Still, appeasing Coverity is pretty harmless in this case.)
Reported by: Coverity
Reviewed by: Yann Collet
Obtained from: zstd 606374269cf3485972c90b993fbb84dc20da032f
Sponsored by: Dell EMC Isilon
Rename ACPI_IVRS_HARDWARE_NEW to ACPI_IVRS_HARDWARE_EFRSUP, since new definitions add Extended Feature Register support. Use IvrsType to distinguish three types of IVHD - 0x10(legacy), 0x11 and 0x40(with EFR). IVHD 0x40 is also called mixed type since it supports HID device entries.
Fix 2 coverity bugs reported by cem.
Reported by:jkim, cem
Approved by:grehan
Differential Revision://reviews.freebsd.org/D14501
Defaulting to CK_MD_RMO has the unfortunate side effect of generating
memory barriers that are useless on those arches, and the even more
unfortunate side effect of generating lfence/sfence/mfence on i386, even
if older CPUs don't support it.
This should fix the panic reported when using IPFW on a Pentium 3.
Note that mfence and sfence might still be used in a few case, but that
shouldn't happen in FreeBSD right now, and should be fixed upstream first.
MFC after: 1 week
IVRS can have entry of type legacy and non-legacy present at same time for same AMD-Vi device. ivhd driver will ignore legacy if new IVHD type is present as specified in AMD-Vi specification. Earlier both of IVHD entries used and two ivhd devices were created.
Add support for new IVHD type 0x11 and 0x40 in ACPI. Create new struct of type acpi_ivrs_hardware_new for these new type of IVHDs. Legacy type 0x10 will continue to use acpi_ivrs_hardware.
Reviewed by: avg
Approved by: grehan
Differential Revision:https://reviews.freebsd.org/D13160
The definitions otherwise leak into anything that includes zstd.h,
which is not desirable for native FreeBSD code.
Reviewed by: allanjude, cem, imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D14352
Mechanically replace uses of MALLOC/FREE with appropriate invocations of
malloc(9) / free(9) (a series of sed expressions). Something like:
* MALLOC(a, b, ... -> a = malloc(...
* FREE( -> free(
* free((caddr_t) -> free(
No functional change.
For now, punt on modifying contrib ipfilter code, leaving a definition of
the macro in its KMALLOC().
Reported by: jhb
Reviewed by: cy, imp, markj, rmacklem
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14035
libfdt highlights since 1.4.3:
- fdt_property_placeholder added to create a property without specifying its
value at creation time
- stringlist helper functions added to libfdt
- Improved overlay support
- Various internal cleanup
Also switch stand/fdt over to using libfdt for overlay support with this
update. Our current overlay implementation works only for limited use cases
with overlays generated only by some specific versions of our dtc(1). Swap
it out for the libfdt implementation, which supports any properly generated
overlay being applied to a properly generated base.
This will be followed up fairly soon with an update to dtc(1) in tree to
properly generate overlays.
MFC note: the <stdlib.h> include this update introduces in libfdt_env.h is
apparently not necessary in the context we use this in. It's not immediately
clear to me the motivation for it being introduced, but it came in with
overlay support. I've left it in for the sake of accuracy and because it's
not harmful here on HEAD, but MFC'ing this to stable/11 will require
wrapping the #include in an `#ifndef _STANDALONE` block or else it will
cause build failures.
Tested on: Banana Pi-M3 (ARMv7)
Tested on: Pine64 (aarch64)
Tested on: PowerPC [nwhitehorn]
Reviewed by: manu, nwhitehorn
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D13893
This is in contrib code but since we only have mallocarray(9) in current
we will not upstream this.
This effectively brings back r327934, which was reverted to correct the
log message.
