In particular: Changed Namespace List, Commands Supported and Effects,
Reservation Notification, Sanitize Status.
Add few new arguments to `nvmecontrol log` subcommand.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
While very useful by itself, it also makes `nvmecontrol` not depend on
hardcoded device names parsing, that in its turn makes simple to take
nvdX (and potentially any other) device names as arguments.
Also added IOCTL bypass from nvdX to respective nvmeYnsZ makes them
interchangeable for management purposes.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
The timeout field in the CAPS register is defined to be 8 bits, so its type was
uint8_t. We recently started adding 1 to it to cope with rogue devices that
listed 0 timeout time (which is impossible). However, in so doing, other devices
that list 0xff (for a 2 minute timeout) were broken when adding 1
overflowed. Widen the type to be uint32_t like its source register to avoid the
issue.
Reported by: bapt@
These macros make places where we extract these easier to read. The shift and
mask stuff is also a bit tedious and error prone. Start with the CAP_LO and
CAP_HI registers since their scope is somewhat constrained. This is style
chagne only, no functional changes.
Reviewed by: chuck
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20979
Neither the 1.3 or 1.4 standards say this number is 1's based, but adding 1
costs little and copes with those NVMe drives that report '0' in this field
cheaply. This is consistent with what the Linux driver does as well.
Maintain symmetry with nvme_ctrlr_create_qpairs, making it easier to
match init/uninit scenarios.
Signed-off-by: John Meneghini <johnm@netapp.com>
Submitted by: Michael Hordijk <hordijk@netapp.com>
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D19781
retries.
When resetting the controller, we abort I/O. Prior to this fix, we
printed a ton of abort messages for I/O that we're going to
retry. This imparts no useful information. Stop printing them unless
our retry count is exhausted. Clarify code for when we don't retry,
and remove useless arg to a routine that's always called with it
as 'true'. All the other debug is still printed (including multiple
reset messages if we have multiple timeouts before the taskqueue
runs the actual reset) so that we know when we reset.
Reviewed by: jimharris@, chuck@
Differential Revision: https://reviews.freebsd.org/D19431
supporting older kernels. However, all supported versions of FreeBSD
have unmapped I/Os (as do several that have gone EOL), remove it. It's
unlikely the driver would work on the older kernels anyway at this
point.
o In vm_pager_bufferinit() create pbuf_zone and start accounting on how many
pbufs are we going to have set.
In various subsystems that are going to utilize pbufs create private zones
via call to pbuf_zsecond_create(). The latter calls uma_zsecond_create(),
and sets a limit on created zone. After startup preallocate pbufs according
to requirements of all pbuf zones.
Subsystems that used to have a private limit with old allocator now have
private pbuf zones: md(4), fusefs, NFS client, smbfs, VFS cluster, FFS,
swap, vnode pager.
The following subsystems use shared pbuf zone: cam(4), nvme(4), physio(9),
aio(4). They should have their private limits, but changing that is out of
scope of this commit.
o Fetch tunable value of kern.nswbuf from init_param2() and while here move
NSWBUF_MIN to opt_param.h and eliminate opt_swap.h, that was holding only
this option.
Default values aren't touched by this commit, but they probably should be
reviewed wrt to modern hardware.
This change removes a tight bottleneck from sendfile(2) operation, that
uses pbufs in vnode pager. Other pagers also would benefit from faster
allocation.
Together with: gallatin
Tested by: pho
The original NVMe API used bit-fields to represent fields in data
structures defined by the specification (e.g. the op-code in the command
data structure). The implementation targeted x86_64 processors and
defined the bit fields for little endian dwords (i.e. 32 bits).
This approach does not work as-is for big endian architectures and was
changed to use a combination of bit shifts and masks to support PowerPC.
Unfortunately, this changed the NVMe API and forces #ifdef's based on
the OS revision level in user space code.
This change reverts to something that looks like the original API, but
it uses bytes instead of bit-fields inside the packed command structure.
As a bonus, this works as-is for both big and little endian CPU
architectures.
Bump __FreeBSD_version to 1200081 due to API change
Reviewed by: imp, kbowling, smh, mav
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D16404
- Remove layering violation, when NVMe SIM code accessed CAM internal
device structures to set pointers on controller and namespace data.
Instead make NVMe XPT probe fetch the data directly from hardware.
- Cleanup NVMe SIM code, fixing support for multiple namespaces per
controller (reporting them as LUNs) and adding controller detach support
and run-time namespace change notifications.
- Add initial support for namespace change async events. So far only
in CAM mode, but it allows run-time namespace arrival and departure.
- Add missing nvme_notify_fail_consumers() call on controller detach.
Together with previous changes this allows NVMe device detach/unplug.
Non-CAM mode still requires a lot of love to stay on par, but at least
CAM mode code should not stay in the way so much, becoming much more
self-sufficient.
Reviewed by: imp
MFC after: 1 month
Sponsored by: iXsystems, Inc.
Admin pass-through requests took controller lock before the queue lock,
but in case of request submission to a failed controller controller lock
was taken after the queue lock. Fix that by reducing the lock scopes and
switching to mtx_pool locks to track pass-through request completion.
Sponsored by: iXsystems, Inc.
This change allows clean device detach on attach failures and driver unload,
while previous code tried to talk to already shut down controller, or even
accessed resources failed to allocate.
Sponsored by: iXsystems, Inc.
The NVME standard has required in section 7.2.6, since at least 1.1,
that a clean shutdown is signalled by deleting the subission and the
completion queues before setting the shutdown bit in CC. The 1.0
standard, apparently, did not and many of the early Intel cards didn't
care. Some newer cards care, at least one whose beta firmware can
scramble the card on an unclean shutdown. Linux has done this for some
time. To make it possible to move forward with an evaluation of this
pre-release card with wonky firmware, delete the queues on the card
when we delete the qpair structures.
Sponsored by: Netflix
Remove bitfields from defined structures as they are not portable.
Instead use shift and mask macros in the driver and nvmecontrol application.
NVMe is now working on powerpc64 host.
Submitted by: Michal Stanek <mst@semihalf.com>
Obtained from: Semihalf
Reviewed by: imp, wma
Sponsored by: IBM, QCM Technologies
Differential revision: https://reviews.freebsd.org/D13916
optimize away these loops. Change boolean to int to match what atomic
API supplies. Remove wmb() since the atomic_store_rel() on status.done
ensure the prior writes to status. It also fixes the fact that there
wasn't a rmb() before reading done. This should also be more efficient
since wmb() is fairly heavy weight.
Sponsored by: Netflix
Reviewed by: kib@, jim harris
Differential Revision: https://reviews.freebsd.org/D14053
bug that requires 'hands off' for a period of time (2.3s) before we
check the RDY bit. Sicne this is a very odd quirk for a very limited
selection of drives, do this as a quirk. This prevented a successful
reset of the card when the card wedged.
Also, make sure that we comply with the advice from section 3.1.5 of
the 1.3 spec says that transitioning CC.EN from 0 to 1 when CSTS.RDY
is 1 or transitioning CC.EN from 1 to 0 when CSTS.RDY is 0 "has
undefined results". Short circuit when EN == RDY == desired state.
Finally, fail the reset if the disable fails. This will lead to a
failed device, which is what we want. (note: nda device needs
work for coping with a failed device).
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D13389
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
1/4 of the number of queues times queue entries is too limiting. It
works up to about 4k IOPS / 3.0GB/s for hardware that can do
4.4k/3.2GB/s with nvd. 3/4 works better, though it highlights issues
in the fairness of nda's choice of TRIM vs READ. That will be fixed
separately.
Provided a better estimate for the number of transactions that can be
pending at one time. This will be number of queues * number of
trackers / 4, as suggested by Jim Harris. This gives a better estimate
of the number of transactions that CAM should queue before applying
back pressure. This should be revisted when we have real multi-queue
support in CAM and the upper layers of the I/O stack.
Sponsored by: Netflix
Some drives sometimes have errors for things like setting the number
of queue entries in the submission queue. The error paths taken for
these drives ensure a panic dereferencing uninialized data.
Sponsored by: Netflix
Fix assumptions about name spaces in NVME driver. First, it assumes
cdata.nn is the number of configured devices. However, it is the
number of supported name spaces. Second, it assumes that there will
never be more than 16 name spaces supported, but a certain drive I'm
testing reports 1024. It assumes that name spaces are a tightly packed
namespace, but the standard seems to indicate otherwise. Finally, it
assumes that an error would be generated when quearying an
unconfigured namespace. Instead, it succeeds but the identify data is
all zeros.
Fix these by limiting the number of name spaces we probe to 16. Remove
aborting when we find one in error. When the size of the name space is
zero, ignore it.
This is admittedly a bandaide. The long term fix will be to
participate in the enumeration and name space change protocols
definfed in the NVNe standard.
Sponsored by: Netflix
This was a regression from r293328, which deferred allocation
of the controller's ioq array until after interrupts are enabled
during boot.
PR: 207432
Reported and tested by: Andy Carrel <wac@google.com>
MFC after: 3 days
Sponsored by: Intel
nvme(4) issues a SET_NUM_QUEUES command during device
initialization to ensure enough I/O queues exists for each
of the MSI-X vectors we have allocated. The SET_NUM_QUEUES
command is then issued again during nvme_ctrlr_start(), to
ensure that is properly set after any controller reset.
At least one NVMe drive exists which fails this second
SET_NUM_QUEUES command during device initialization. So
change nvme_ctrlr_start() to only issue its SET_NUM_QUEUES
command when it is coming out of a reset - avoiding the
duplicate SET_NUM_QUEUES during device initialization.
Reported by: gallatin
MFC after: 3 days
Sponsored by: Intel
Due to FreeBSD system-wide limits on number of MSI-X vectors
(https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=199321),
it may be desirable to allocate fewer than the maximum number
of vectors for an NVMe device, in order to save vectors for
other devices (usually Ethernet) that can take better
advantage of them and may be probed after NVMe.
This tunable is expressed in terms of minimum number of CPUs
per I/O queue instead of max number of queues per controller,
to allow for a more even distribution of CPUs per queue. This
avoids cases where some number of CPUs have a dedicated queue,
but other CPUs need to share queues. Ideally the PR referenced
above will eventually be fixed and the mechanism implemented
here becomes obsolete anyways.
While here, fix a bug in the CPUs per I/O queue calculation to
properly account for the admin queue's MSI-X vector.
Reviewed by: gallatin
MFC after: 3 days
Sponsored by: Intel
Previously nvme(4) would revert to a signle I/O queue if it could not
allocate enought interrupt vectors or NVMe submission/completion queues
to have one I/O queue per core. This patch determines how to utilize a
smaller number of available interrupt vectors, and assigns (as closely
as possible) an equal number of cores to each associated I/O queue.
MFC after: 3 days
Sponsored by: Intel
Instead just use num_io_queues to make this determination.
This prepares for some future changes enabling use of multiple
queues when we do not have enough queues or MSI-X vectors
for one queue per CPU.
MFC after: 3 days
Sponsored by: Intel
- Use pointer assignment rather than a combination of pointers and
flags to switch buffers between unmapped and mapped. This eliminates
multiple flags and generally simplifies the logic.
- Eliminate b_saveaddr since it is only used with pager bufs which have
their b_data re-initialized on each allocation.
- Gather up some convenience routines in the buffer cache for
manipulating buf space and buf malloc space.
- Add an inline, buf_mapped(), to standardize checks around unmapped
buffers.
In collaboration with: mlaier
Reviewed by: kib
Tested by: pho (many small revisions ago)
Sponsored by: EMC / Isilon Storage Division
Previously, if per-CPU MSI-X vectors could not be allocated,
nvme(4) would fall back to INTx with a single I/O queue pair.
This change will still fall back to a single I/O queue pair, but
allocate MSI-X vectors instead of reverting to INTx.
MFC after: 1 week
Sponsored by: Intel
controller initialization.
The spec says OS drivers should send this command after controller
initialization completes successfully, but other NVMe OS drivers are
not sending this command. This change will therefore reduce differences
between the FreeBSD and other OS drivers.
Sponsored by: Intel
MFC after: 3 days
the spoofed identify data into the user buffer rather than issuing the
command to the controller, since Chatham IDENTIFY data is always spoofed.
While here, fix a bug in the spoofed data for Chatham submission and
completion queue entry sizes.
Sponsored by: Intel
MFC after: 3 days
