These tests query a running process for information related to the -b,
-c, -e, and -f flags; the -f testcase is largely stubbed out, pending
additional work to determine a good, deterministic descriptor.
Core file test support is coming soon--it requires a bit more effort
due to the fact that:
- coredumps can be disabled (kern.coredump=0).
- corefiles can be put in different directories than the current
directory, or be named something other than `<prog>.core`
(`kern.corefile`).
MFC after: 2 months
Sponsored by: Dell EMC Isilon
function (they used to say UMA_ZONE_NOFREE), so flag parameter goes away.
The zone_fini parameter also goes away. Previously no protocols (except
divert) supplied zone_fini function, so inpcb locks were leaked with slabs.
This was okay while zones were allocated with UMA_ZONE_NOFREE flag, but now
this is a leak. Fix that by suppling inpcb_fini() function as fini method
for all inpcb zones.
Implement simple separate ip module and fragment re-assembly.
The work is based on send and receive previously implemented in udp.c,
moved to ip.c and added the ip fragment re-assembly.
This change allows to specify larger tftp or nfs payload, such as:
tftp.blksize=4096 or nfs.read_size=4096
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D10631
The idle thread may process callouts while reloading the timer in
cpu_activeclock(). In this case, provide a representative value, &cpu_idle,
instead of 0 for args[0] so that the active thread can be more easily
identified from the probe.
This addresses intermittent failures of the profile-n/tst.argtest.d test.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D10651
operation after processor is configured to allow all required
features.
In particular, NX must be enabled in EFER, otherwise load of page
table element with nx bit set causes reserved bit page fault. Since
malloc uses direct mapping for small allocations, in particular for
the suspension pcbs, and DMAP is nx after r316767, this commit tripped
fault on resume path.
Restore complete state of EFER while wakeup code is still executing
with custom page table, before calling resumectx, instead of trying to
guess which features might be needed before resumectx restored EFER on
its own.
Bisected and tested by: trasz
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
The existing 'binary' test in netbsd-tests/ does a basic check of the
default treatment for binary behavior, but not much more than that.
Given some opportunity for breakage recently that did not trigger any
failures, add some tests to cover the three different binary file
behaviors (a, -I, -U) and their --binary-files= equivalent values.
Submitted by: Kyle Evans <kevans91@ksu.edu>
Reviewed by: cem, ngie
Differential Revision: https://reviews.freebsd.org/D10620
Bring in some bits from NetBSD and lift the restriction in uniq(1) that
-c cannot be used with the -d and -u options. This restriction seems
unnecessary and is supported at least by GNU, OpenBSD, and NetBSD. Lift
the restriction and simplify the show() logic a little bit to maintain
functionality when -c is provided with -d/-u.
Also with this change, -d and -u are now actually a mutually exclusive,
albeit valid, combination. Given that they both indicate opposite
behavior, uniq(1) will no longer output anything if both -d and -u are
supplied. This is in line with NetBSD as well as GNU.
Adjust the man page and usage() to reflect that -c is its own standalone
option.
PR: 200553
Submitted by: Kyle Evans <kevans91@ksu.edu>
Reviewed by: cem, emaste
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D10694
This is being done to avoid dereferencing a NULL pointer via strlcat,
obscuring the underlying issue with the getcwd(3) call.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Check if passed phdr is actually phdr of the interpreter itself, and
decide that this is the case of direct execution. In this case, the
binary to activate is specified in the argv[1]. After opening it,
shift down on-stack structure with argv, env and aux vectors to
emulate execution of the binary and not of the interpreter.
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D10701
If the mapped object is linked at specific address, we must obey it.
If AT_EXECFD is not used, only in-kernel ELF image activator needed to
keep the mapping address, since only binaries are linked at the fixed
address, and binaries are mapped by kernel in this case.
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
X-Differential revision: https://reviews.freebsd.org/D10701
_local_initshells did not reset cp to the beginning of the line buffer
for every iteration that it called fgets(3), leading to writing past the
end of line with fairly long /etc/shells or excessively long line
lengths. Correct this by properly resetting cp.
PR: 192528
Submitted by: Kyle Evans <kevans91@ksu.edu>
Reviewed by: cem, jilles
Differential Revision: https://reviews.freebsd.org/D10690
Previously, when given a negative -A/-B/-C argument bsdgrep would
overflow the respective context flag(s) and exhibited surprising
behavior.
Fix this by removing unsignedness of Aflag/Bflag and erroring out if
we're given a value < 0. Also adjust the type used to track 'tail'
context in procfile() so that it accurately reflects the Aflag value
rather than overflowing and losing trailing context.
This also fixes an inconsistency previously existing between -n and
-C "n" behavior. They are now both limited to LLONG_MAX, to be
consistent.
Add some test cases to make sure grep errors out properly for both
negative context values as well as non-numeric context values rather
than giving bogus matches.
Submitted by: Kyle Evans <kevans91@ksu.edu>
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D10675
If realpath() allocated memory for result and failed, the memory is
freed in each place where return is performed. More, the function
needs to track the allocation status, to not free user-supplied
buffer.
Consolidate the memory handling in the wrapper, freeing the buffer if
the actual worker failed.
Reviewed by: emaste (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D10670
- The statement "left_len -= s - left;" does not take the slash into
account if one was found. This results in the invariant
"left[left_len] == '\0'" being violated (and possible buffer
overflows). The patch replaces the variable "s" with a size_t
"next_token_len" for more clarity.
- "slen" from readlink(2) can be 0 when encountering empty
symlinks. Then, further down, "symlink[slen - 1]" underflows the
buffer. When slen == 0, realpath(3) should probably return ENOENT
(http://austingroupbugs.net/view.php?id=825,
https://lwn.net/Articles/551224/).
Some other minor issues:
- The condition "resolved_len >= PATH_MAX" cannot be true.
- Similarly, "s - left >= sizeof(next_token)" cannot be true, as long
as "sizeof(next_token) >= sizeof(left)".
- Return ENAMETOOLONG when a resolved symlink from readlink(2) is too
long for the symlink buffer (instead of just truncating it).
- "resolved_len > 1" below the call to readlink(2) is always true as
"strlcat(resolved, next_token, PATH_MAX);" always results in a
string of length > 1. Also, "resolved[resolved_len - 1] = '\0';" is
not needed; there can never be a trailing slash here.
- The truncation check for "strlcat(symlink, left, sizeof(symlink));"
should be against "sizeof(symlink)" (the third argument to strlcat)
instead of "sizeof(left)".
Submitted by: Jan Kokemц╪ller <jan.kokemueller@gmail.com>
PR: 219154
MFC after: 2 weeks
Two blocks in e1000_ich8lan.c are misaligned, causing noise with some
compilers (gcc 6).
Reviewed by: imp, erj
Differential Revision: https://reviews.freebsd.org/D10741
Previously, when the VI_TRYLOCK failed, we would spin under the mutex
that protects the vnode active list until we either succeeded or
noticed that we had hogged the CPU. Since we were violating the lock
order, this would guarantee that we would become a hog under any
deadlock condition (e.g. a race with vdrop(9) on the same vnode). In
the presence of many concurrent threads in sync(2) or vdrop etc, the
victim could hang for a long time.
Now, avoid spinning by dropping and reacquiring the locks in the
conventional lock order when the trylock fails. This requires a dance
with the vnode hold count.
Submitted by: Tom Rix <trix@juniper.net>
Tested by: pho
Differential revision: https://reviews.freebsd.org/D10692
pools, implement outputting of IPv6 addresses in the ippool debug list
of hash type pools (ippool -l -d -t hash). Currently IPv6 in ippool tree
type pool handling is mostly implemented.
This continues theseries of commits to remediate ippool.
This will be MFCed with a yet to be committed series of fixes to ippool
after it has been fully remediated.
PR: 218433
and Braswell eMMC and SDXC controllers share the same IDs. Like in
the PCI case, Braswell eMMC needs the SDHCI_QUIRK_DATA_TIMEOUT_1MHZ
quirk (see r311794 for the corresponding change to the sdhci(4) PCI
PCI front-end), though. However, due to the shared ACPI IDs, this
is trickier to do.
- Intel Apollo Lake eMMC and SDXC controllers are affected by the
APL18 ("Using 32-bit Addressing Mode With SD/eMMC Controller May
Lead to Unpredictable System Behavior") silicon bug [1]. When this
erratum hits, typically both SDHCI and XHCI controllers wedge.
According to Intel, using ADMA2 with 64-bit addressing and 96-bit
descriptors serves as a workaround. Until such times when sdhci(4)
has ADMA2 support, flag DMA as broken for affected interfaces.
This turns out to work around the problem, too, at the cost of
performance.
- In the sdhci(4) ACPI front-end, probe the Intel Apollo Lake eMMC
and SDXC controllers, too.
1: http://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/pentium-celeron-n-series-j-series-datasheet-spec-update.pdf
The _Noreturn attribute was added to placate Coverity and other static
analysis tools. The __printflike attribute was added to catch issues
with the calls related to printf(3) abuse.
- Modify the code to facilitate the __printflike attribute addition.
- Convert errf calls in to_mb(..) and to_mb_string(..) to warn(..) so
the calls will return instead of exiting, as the code suggests it
should.
Differential Revision: D10704
MFC after: 1 month
Reviewed by: pfg
Sponsored by: Dell EMC Isilon
It does not make much sense to generate the '-' in a pattern bracket
expression using arithmetic expansion, but it does not make sense to forbid
it either.
Try to avoid reprocessing the string if it is unnecessary.
The default values found in /etc/passwd and /etc/group are 65534, 65533.
In mountd.c, the defaults were -2, which was 65534 back when uid_t was 16bits.
Without this patch, a file created by root on an NFS exported volume without
the "-root=" export option will end up owned by uid 4**32 - 2.
When discussed on freebsd-current@, it seemed that users preferred the
values being changed to 65534/65533.
I have not added code to acquire these values from the databases, since
the mountd daemon might get "stuck" during startup waiting for a non-responsive
password database server.
Discussed on: freebsd-current
an inexact floating point exception. The variable cannot be eliminated,
unfortunately, otherwise the desired addition triggering the exception
will be emitted neither by clang, nor by gcc.
Reviewed by: Steve Kargl, bde
MFC after: 3 days
It does not make much sense to generate the '-' in a pattern bracket
expression using arithmetic expansion, but it does not make sense to forbid
it either.
This test already passes.
partially sort them by style(9). Move locals declarations from nested
blocks into the block at function start.
Discussed with: emaste
MFC after: 1 week
compiled into the kernel
This ensures that .iss_asm (the number of ASM listeners) isn't incorrectly
decremented for MLD-layer source datagrams when inspecting im*s_st[1]
(the second state in the structure).
MFC after: 2 months
PR: 217509 [1]
Reported by: Coverity (Isilon)
Reviewed by: ae ("This patch looks correct to me." [1])
Submitted by: Miles Ohlrich <miles.ohlrich@isilon.com>
Sponsored by: Dell EMC Isilon
VM_MEMATTR_WRITE_COMBINING in the kernel. This fixes a bug where Xorg would
use write back cached memory for its graphics buffers. This would produce
artifacts on the screen as cachelines were written to memory.
MFC after: 1 week
Sponsored by: DARPA, AFRL
src.conf(5) knobs
This will allow consumers of FreeBSD to use the unmodified configuration
files out of the box more than previously.
Both newsyslog.conf and syslog.conf:
- /var/log/lpd-errs (MK_LPR != no)
- /var/log/ppp.log (MK_PPP != no)
- /var/log/xferlog (MK_FTP != no)
newsyslog.conf:
- /var/log/amd.log (MK_AMD != no)
- /var/log/pflog (MK_PF != no)
- /var/log/sendmail.st (MK_SENDMAIL != no)
MFC after: 3 weeks
Sponsored by: Dell EMC Isilon
is blocked. The spurious wakeup might result in spurious EINTR.
The reschedule_signals() function is called when the calling thread
has the signal mask changed. For each newly blocked signal, we try to
find a thread which might have the signal not blocked. If no such
thread exists, sigtd() returns random thread, which must not be waken
up. I decided that re-checking, as suggested by PR submitter, is more
reasonable change than to change sigtd() interface, due to other uses
of sigtd(). signotify() already performs this check.
Submitted by: Duane <parakleta@darkreality.org>
PR: 219228
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Adjust notification points slightly to catch all auth failures,
rather than just the ones caused by bad usernames.
Modify notification point for bad usernames to send new type of
BLACKLIST_BAD_USER. (Support in libblacklist will be forthcoming soon.)
Add guards to allow library headers to expose the enum of action values.
Reviewed by: des
Approved by: des
Sponsored by: The FreeBSD Foundation
* This fixes cases where the group id of wide commands got lost, e.g. this
happened to the IWM_SCAN_ABORT_UMAC command.
Obtained from: dragonflybsd.git 71310fab0caca79bb5da43d9d642e77a4c27eea2
