built without support for miibus PHYs. Most ed cards don't need
miibus support, so it's useful to be able to avoid the bloat of
all the mii devices for small fixed-purpose kernels.
then one can restart from a panic by resetting the panicstr variable to
NULL. This commit conditionalizes the previously committed functionality
on this variable. It also removes the __dead2 attribute from the panic()
function so that when one continues from a panic() the behavior will
be predictable.
information. The default limits only effect machines with > 1GB of ram
and can be overriden with two new kernel conf variables VM_SWZONE_SIZE_MAX
and VM_BCACHE_SIZE_MAX, or with loader variables kern.maxswzone and
kern.maxbcache. This has the effect of leaving more KVM available for
sizing NMBCLUSTERS and 'maxusers' and should avoid tripups where a sysad
adds memory to a machine and then sees the kernel panic on boot due to
running out of KVM.
Also change the default swap-meta auto-sizing calculation to allocate half
of what it was previously allocating. The prior defaults were way too high.
Note that we cannot afford to run out of swap-meta structures so we still
stay somewhat conservative here.
directories. When enabled via "options UFS_DIRHASH", in-core hash
arrays are maintained for large directories. These allow all
directory operations to take place quickly instead of requiring
long linear searches. For now anyway, dirhash is not enabled by
default.
The in-core hash arrays have a memory requirement that is approximately
half the size of the size of the on-disk directory file. A number
of new sysctl variables allow control over which directories get
hashed and over the maximum amount of memory that dirhash will use:
vfs.ufs.dirhash_minsize
The minimum on-disk directory size for which hashing should be
used. The default is 2560 (2.5k).
vfs.ufs.dirhash_maxmem
The system-wide maximum total memory to be used by dirhash data
structures. The default is 2097152 (2MB).
The current amount of memory being used by dirhash is visible
through the read-only sysctl variable vfs.ufs.dirhash_maxmem.
Finally, some extra sanity checks that are enabled by default, but
which may have an impact on performance, can be disabled by setting
vfs.ufs.dirhash_docheck to 0.
Discussed on: -fs, -hackers
1. Add SA_IO_TIMEOUT as an option (4 minutes default) to cover reads,
writes, wfm, test unit ready.
2. Add internal SCSIOP_TIMEOUT (e.g., for mode sense) at 1 minute. This
should not require an option, but is cleaner to parameterize.
MFC after: 1 week
This closes a minor information leak which allows a remote observer to
determine the rate at which the machine is generating packets, since the
default behaviour is to increment a counter for each packet sent.
Reviewed by: -net
Obtained from: OpenBSD
systems were repo-copied from sys/miscfs to sys/fs.
- Renamed the following file systems and their modules:
fdesc -> fdescfs, portal -> portalfs, union -> unionfs.
- Renamed corresponding kernel options:
FDESC -> FDESCFS, PORTAL -> PORTALFS, UNION -> UNIONFS.
- Install header files for the above file systems.
- Removed bogus -I${.CURDIR}/../../sys CFLAGS from userland
Makefiles.
If for some reason DEVFS is undesired, the "NODEVFS" option is
needed now.
Pending any significant issues, DEVFS will be made mandatory in
-current on july 1st so that we can start reaping the full
benefits of having it.
interfaces and functionality intended for use during correctness and
regression testing. Features enabled by "options REGRESSION" may
in and of themselves introduce security or correctness problems if
used improperly, and so are not intended for use in production
systems, only in testing environments.
Obtained from: TrustedBSD Project
Add simple "xlat" converter which performs 8to8 table based conversion.
Unicode converter will be added in the near future.
Reviewed by: silence on arch@
Files placement reviewed by: bde
Obtained from: smbfs
implementation is still experimental, and while fairly broadly tested,
is not yet intended for production use. Support for POSIX.1e ACLs on
UFS will not be MFC'd to RELENG_4.
This implementation works by providing implementations of VOP_[GS]ETACL()
for FFS, as well as modifying the appropriate access control and file
creation routines. In this implementation, ACLs are backed into extended
attributes; the base ACL (owner, group, other) permissions remain in the
inode for performance and compatibility reasons, so only the extended and
default ACLs are placed in extended attributes. The logic for ACL
evaluation is provided by the fs-independent kern/kern_acl.c.
o Introduce UFS_ACL, a compile-time configuration option that enables
support for ACLs on FFS (and potentially other UFS-based file systems).
o Introduce ufs_getacl(), ufs_setacl(), ufs_aclcheck(), which
respectively get, set, and check the ACLs on the passed vnode.
o Introduce ufs_sync_acl_from_inode(), ufs_sync_inode_from_acl() to
maintain access control information between inode permissions and
extended attribute data.
o Modify ufs_access() to load a file access ACL and invoke
vaccess_acl_posix1e() if ACLs are available on the file system
o Modify ufs_mkdir() and ufs_makeinode() to associate ACLs with newly
created directories and files, inheriting from the parent directory's
default ACL.
o Enable these new vnode operations and conditionally compiled code
paths if UFS_ACL is defined.
A few notes:
o This implementation is fairly widely tested, but still should be
considered experimental.
o Currently, ACLs are not exported via NFS, instead, the summarizing
file mode/etc from the inode is. This results in conservative
protection behavior, similar to the behavior of ACL-nonaware programs
acting locally.
o It is possible that underlying binary data formats associated with
this implementation may change. Consumers of the implementation
should expect to find their local configuration obsoleted in the
next few months, resulting in possible loss of ACL data during an
upgrade.
o The extended attributes interface and implementation is still
undergoing modification to address portable interface concerns, as
well as performance.
o Many applications do not yet correctly handle ACLs. In general,
due to the POSIX.1e ACL model, behavior of ACL-unaware applications
will be conservative with respects to file protection; some caution
is recommended.
o Instructions for configuring and maintaining ACLs on UFS will be
committed in the near future; in the mean time it is possible to
reference the README included in the last UFS ACL distribution
placed in the TrustedBSD web site:
http://www.TrustedBSD.org/downloads/
Substantial debugging, hardware, travel, or connectivity support for this
project was provided by: BSDi, Safeport Network Services, and NAI Labs.
Significant coding contributions were made by Chris Faulhaber. Additional
support was provided by Brian Feldman, Thomas Moestl, and Ilmar Habibulin.
Reviewed by: jedgar, keichii, mckusick, trustedbsd-discuss, freebsd-fs
Obtained from: TrustedBSD Project
very specific scenarios, and now that we have had net.inet.tcp.blackhole for
quite some time there is really no reason to use it any more.
(first of three commits)
options UFS_EXTATTR and UFS_EXTATTR_AUTOSTART respectively. This change
reflects the fact that our EA support is implemented entirely at the
UFS layer (modulo FFS start/stop/autostart hooks for mount and unmount
events). This also better reflects the fact that [shortly] MFS will also
support EAs, as well as possibly IFS.
o Consumers of the EA support in FFS are reminded that as a result, they
must change kernel config files to reflect the new option names.
Obtained from: TrustedBSD Project
"options FFS_EXTATTR". When extended attribute auto-starting
is enabled, FFS will scan the .attribute directory off of the
root of each file system, as it is mounted. If .attribute
exists, EA support will be started for the file system. If
there are files in the directory, FFS will attempt to start
them as attribute backing files for attributes baring the same
name. All attributes are started before access to the file
system is permitted, so this permits race-free enabling of
attributes. For attributes backing support for security
features, such as ACLs, MAC, Capabilities, this is vital, as
it prevents the file system attributes from getting out of
sync as a result of file system operations between mount-time
and the enabling of the extended attribute. The userland
extattrctl tool will still function exactly as previously.
Files must be placed directly in .attribute, which must be
directly off of the file system root: symbolic links are
not permitted. FFS_EXTATTR will continue to be able
to function without FFS_EXTATTR_AUTOSTART for sites that do not
want/require auto-starting. If you're using the UFS_ACL code
available from www.TrustedBSD.org, using FFS_EXTATTR_AUTOSTART
is recommended.
o This support is implemented by adding an invocation of
ufs_extattr_autostart() to ffs_mountfs(). In addition,
several new supporting calls are introduced in
ufs_extattr.c:
ufs_extattr_autostart(): start EAs on the specified mount
ufs_extattr_lookup(): given a directory and filename,
return the vnode for the file.
ufs_extattr_enable_with_open(): invoke ufs_extattr_enable()
after doing the equililent of vn_open()
on the passed file.
ufs_extattr_iterate_directory(): iterate over a directory,
invoking ufs_extattr_lookup() and
ufs_extattr_enable_with_open() on each
entry.
o This feature is not widely tested, and therefore may contain
bugs, caution is advised. Several changes are in the pipeline
for this feature, including breaking out of EA namespaces into
subdirectories of .attribute (this is waiting on the updated
EA API), as well as a per-filesystem flag indicating whether
or not EAs should be auto-started. This is required because
administrators may not want .attribute auto-started on all
file systems, especially if non-administrators have write access
to the root of a file system.
Obtained from: TrustedBSD Project
valid) if BPF is missing.
The netgraph_bpf node forced bpf to be present, reflect that in the
options.
Stop doing a 'count bpf' - we provide stubs.
Since a handful of drivers still refer to "bpf.h", provide a more accurate
indication that the API is present always. (eg: netinet6)
