C11 atomics now work on all the architectures. Have at least a single
piece of software in our base system that uses C11 atomics. This
somewhat makes it less likely that we break it because of LLVM imports,
etc.
Allow clang to build __clear_cache on ARM.
__clear_cache is special. It needs no signature, but is a real function in
compiler_rt or libgcc.
Patch by Andrew Turner.
This allows us to build the __clear_cache function in compiler-rt.
ensure all per-vnet related hhook initialisation is completed prior to any
virtualised hhook points attempting registration.
vnet_register_sysinit() requires that a stage later than SI_SUB_VNET be chosen.
There are no per-vnet initialisors in the source tree at this time which run
earlier than SI_SUB_INIT_IF. A quick audit of non-virtualised SYSINITs indicates
there are no subsystems pre SI_SUB_MBUF that would likely be interested in
registering a virtualised hhook point.
Settle on SI_SUB_MBUF as hhook's per-vnet initialisation stage as it's the first
overtly network-related initilisation stage to run after SI_SUB_VNET. If a
subsystem that initialises earlier than SI_SUB_MBUF ends up wanting to register
virtualised hhook points in future, hhook's use of SI_SUB_MBUF will need to be
revisited and would probably warrant creating a dedicated SI_SUB_HHOOK which
runs immediately after SI_SUB_VNET.
MFC after: 1 week
Emit native implementations of atomic operations on FreeBSD/armv6.
Just like on Linux, FreeBSD/armv6 assumes the system supports
ldrex/strex unconditionally. It is also used by the kernel. We can
therefore enable support for it, like we do on Linux.
While there, change one of the unit tests to explicitly test against
armv5 instead of armv7, as it actually tests whether libcalls are
emitted.
The atomic_load() and atomic_store() macros conflict with the equally
named macros from <stdatomic.h>. Remove them, as they are only used to
implement functions that are not present on any of the other
architectures.
Provide both __sync_*-style and __atomic_*-style functions that perform
the atomic operations on ARMv5 by using Restartable Atomic Sequences.
While there, clean up some pieces of code where it's sufficient to use
regular uint32_t to store register contents and don't need full reg_t's.
Also sync this back to the MIPS code.
hook functions into hhook points which register after the modules were loaded -
potentially useful during boot or if hhook points are dynamically registered.
MFC after: 1 week
only re-enable I/O when all reasons have cleared.
sys/dev/xen/blkfront/block.h:
In the block front driver softc, replace the boolean
XBDF_FROZEN flag with a count of commands and driver global
issues that freeze the I/O queue. So long xbd_qfrozen_cnt
is non-zero, I/O is halted.
Add flags to xbd_flags for tracking grant table entry and
free command resource shortages. Each of these classes can
increment xbd_qfrozen_cnt at most once.
Add a command flag (XBDCF_ASYNC_MAPPING) that is set whenever
the initial mapping attempt of a command fails with EINPROGRESS.
sys/dev/xen/blkfront/blkfront.c:
In xbd_queue_cb(), use new XBDCF_ASYNC_MAPPING flag to definitively
know if an async bus dmamap load has occurred.
Add xbd_freeze() and xbd_thaw() helper methods for managing
xbd_qfrozen_cnt and use them to implement all queue freezing logic.
Add missing "thaw" to restart I/O processing once grant references
become available.
Sponsored by: Spectra Logic Corporation
hhook_{add|remove}_hook_lookup() so that khelp (and other potential API
consumers) do not have to care when they attempt to (un)hook a particular hook
point identified by id and type.
Reviewed by: scottl
MFC after: 1 week
QEMU 1.4 made the descriptor requirement stricter - the size of buffer
descriptor must exactly match the number of MAC addresses provided.
PR: kern/178955
MFC after: 5 days
Move FreeBSD from interface version 0x00030204 to 0x00030208.
Updates are required to our grant table implementation before we
can bump this further.
sys/xen/hvm.h:
Replace the implementation of hvm_get_parameter(), formerly located
in sys/xen/interface/hvm/params.h. Linux has a similar file which
primarily stores this function.
sys/xen/xenstore/xenstore.c:
Include new xen/hvm.h header file to get hvm_get_parameter().
sys/amd64/include/xen/xen-os.h:
sys/i386/include/xen/xen-os.h:
Correctly protect function definition and variables from being
included into assembly files in xen-os.h
Xen memory barriers are now prefixed with "xen_" to avoid conflicts
with OS native primatives. Define Xen memory barriers in terms of
the native FreeBSD primatives.
Sponsored by: Spectra Logic Corporation
Reviewed by: Roger Pau Monné
Tested by: Roger Pau Monné
Obtained from: Roger Pau Monné (bug fixes)
Run hierarchy with WORLDTMP in the path so it works when it is invoked
directly. Such use is nearly alwasy wrong but appears to be common.[1]
PR: conf/178209 [0], conf/178547 [1]
Submitted by: Garrett Cooper <yaneurabeya@gmail.com> [0]
MFC after: 5 days
[ms-inline asm] Fix a crasher when we fail on a direct match.
The issue was that the MatchingInlineAsm and VariantID args to the
MatchInstructionImpl function weren't being set properly. Specifically, when
parsing intel syntax, the parser thought it was parsing inline assembly in the
at&t dialect; that will never be the case.
The crash was caused when the emitter tried to emit the instruction, but the
operands weren't set. When parsing inline assembly we only set the opcode, not
the operands, which is used to lookup the instruction descriptor.
rdar://13854391 and PR15945
Also, this commit reverts r176036. Now that we're correctly parsing the intel
syntax the pushad/popad don't match properly. I've reimplemented that fix using
a MnemonicAlias.
Pull in r183907 from llvm trunk:
X86: Make the cmov aliases work with intel syntax too.
These commits make a number of Intel-style inline assembly mnemonics
aliases (occurring in several ports) work properly, which could cause
assertions otherwise.
Reported by: kwm, bapt
should be processed. De-select each package as we "process" (actual
processing still pending) each package so that if we get an error, we can
return to an accurate state of selected packages.
KASSERT during TCP hhook registration at boot. Virtualised hook points only
require extra housekeeping and sanity checking when "options VIMAGE" is present.
Reported by: bdrewery,jh,dhw
Tested by: dhw
MFC after: 1 week
X-MFC with: 251732
scheme for defining inline command queuing functions.
Prefer enums to #defines.
sys/dev/xen/blkfront/block.h
Replace inline function generation performed by the
XBDQ_COMMAND_QUEUE() macro with single instances of each
inline function (init, enqueue, dequeue, remove). This was
made possible by using queue indexes instead of bit flags
in the command structure, and passing the index enum as
an argument to the functions.
Improve panic/assert messages in the queue functions.
Combine queue data and stats into a single data structure
and declare an array of them instead of each queue individually.
Convert command flags, softc state, and softc flags to enums.
sys/dev/xen/blkfront/blkfront.c
Mechanical adjustments for new queue api.
Sponsored by: Spectra Logic Corporation
MFC after: 1 week
so that job token pipe is passed to them.
To avoid surprising anyone, only add .MAKE to ${TGTS} when -n
has not been specified (at least for Makefile).
Reviewed by: obrien
But we don't want to set it to + for bmake since it breaks make -N
which is used to supress the normal handling of targets marked with .MAKE
(which seems broken in fmake and might be why _+_ was introduced).
Add some comments to explain what's gong on.
Reviewed by: obrien
- remove return statements from void function [1]
- include missing header
- use O_CLOEXEC instead of separate fcntl() calls
PR: docs/179459 [1]
MFC after: 1 week
This hasn't yet been tested as unfortunately the AR3012 I have doesn't
have the "real" firmware on it; it shipped with the cut down HCI firmware
that only understands enough to accept a new firmware image.
* Linux ath9k (GPIO constants)
NICs which have bluetooth coexistence enabled.
The WB225 NIC has the common antenna switch configuration set to 0x0 which
disables all external switch bit setting. This obviously won't work when
doing coexistence.
This value is a magic value from the windows .inf files. It _looks_ right
but I haven't yet verified it - unfortunately my AR9285+AR3012 BT combo
has an earlier BT device which doesn't actually _have_ firmware on it.
So I have to fix ath3kfw to handle loading in firmware into the newer
NICs before I can finish testing this.
This may not hold true for CUS198, which is another custom AR9485 board.
The bluetooth setup code actually does a channel lookup during setup,
even though we haven't yet programmed in a channel. Sigh.
Tested:
* WB225 (AR9485) + bluetooth
generic mii_phy_reset().
- Return the result of mii_mediachg() rather than blindly returning 0.
- on smsc(4), driver lock should be held to get current
mii_media_active/mii_media_status value.
Reviewed by: yongari
type and id, as compared to virtualised hook points which are now uniquely
identified by type, id and a vid (which for vimage is the pointer to the vnet
that the hhook resides in).
All hhook_head structs for both virtualised and non-virtualised hook points
coexist in hhook_head_list, and a separate list is maintained for hhook points
within each vnet to simplify some vimage-related housekeeping.
Reviewed by: scottl
MFC after: 1 week
* Add the LNA configuration table entries for AR933x/AR9485
* Add a chip-dependent LNA signal level delta in the startup path
* Add a TODO list for the stuff I haven't yet ported over but
I haven't.
Tested:
* AR9462 with LNA diversity enabled
In netif_free(), call ifmedia_removeall() after ether_ifdetach()
so that bpf listeners are detached, any link state processing
is completed, and there is no chance for external reference to media
information.
Suggested by: yongari
MFC after: 1 week
