Commit Graph

20608 Commits

Author SHA1 Message Date
Gerard Roudier
ec8146d60d - Use `bus space' primitives for IO and MMIO instead
of IO/MMIO legacy methods.
- Prepare the driver for big endian CPU support.
- Clarify memory and IO barriers needed by the driver.
2000-06-08 19:48:16 +00:00
Nick Hibma
6346a48ac0 Add the ID of the InSystem USB Cable (not really supported yet). 2000-06-08 19:27:21 +00:00
Nick Hibma
29c5a748a3 Regen. 2000-06-08 19:26:35 +00:00
Nick Hibma
608e876462 InSystem USB Cable (IDE adapter)
Submitted by:	"Sean O'Connell" <sean@stat.duke.edu>
2000-06-08 19:26:16 +00:00
Bruce Evans
129e169651 Always include the full symbol table (as specified by its start and
end values in bootinfo) in kernel space if it is loaded (i.e., if its
specified end address is nonzero), not just if it is loaded and DDB
is configured.  This may be used to fix kldsym(2) for booting without
/dev/loader; currently, in this case, it just fixes unused pointers
and wastes space consistently.  For booting in the normal way with
/boot/loader, the table is included and pointed to in a different way
and kldsym(2) works.
2000-06-08 17:53:43 +00:00
Dan Moschuk
9714563d83 Add tcpoptions to ipfw. This works much in the same way as ipoptions do.
It also squashes 99% of packet kiddie synflood orgies.  For example, to
rate syn packets without MSS,

ipfw pipe 10 config 56Kbit/s queue 10Packets
ipfw add pipe 10 tcp from any to any in setup tcpoptions !mss

Submitted by:  Richard A. Steenbergen <ras@e-gerbil.net>
2000-06-08 15:34:51 +00:00
Luigi Rizzo
5d3fe434f8 Implement WF2Q+ in dummynet. 2000-06-08 09:45:23 +00:00
John Baldwin
9369c9fb75 Enable USB in GENERIC on the Alpha.
Reviewed by:	deathly silence on -alpha
2000-06-08 01:17:51 +00:00
Daniel C. Sobral
e0d83caeed Put some version checking. 2000-06-07 22:19:49 +00:00
Daniel C. Sobral
a6a1d6e852 Bump loader version due to FICL (duh!) and copyin, copyout, setenv&cia. 2000-06-07 22:14:09 +00:00
Daniel C. Sobral
5ae8a644f6 Bump loader version due to copyin, copyout, setenv&cia. 2000-06-07 22:12:21 +00:00
Daniel C. Sobral
c1312289dd Modify boot-conf so it can take a kernel or directory name as
a parameter and dtrt.

Also, make boot-conf always unload first. There wasn't really any
point in not doing this, as the kernel _has_ to be loaded before
any other modules.

Tested by: dwhite
2000-06-07 22:10:05 +00:00
Daniel C. Sobral
f0b972df2f Add setenv, getenv, setenv?, unsetenv, copyin and copyout to FICL. 2000-06-07 22:07:01 +00:00
Daniel C. Sobral
14a7c31a0c Remove AGAIN definition, as FICL 2.04 provides it.
Add strlen, to help handling data generated by C code.

Add 2>r 2r>, because OO programming without them sucks.
2000-06-07 22:03:37 +00:00
Daniel C. Sobral
7015e7c9a1 Remove a bug that caused local variables declarations in the format
{ | internal -- } to be rejected.
2000-06-07 22:00:10 +00:00
Daniel C. Sobral
7632c12363 Place original builtins in a vocabulary called "builtins". This
is intended mainly for debuging purposes, but it can be used by
other words if done carefully.
2000-06-07 21:57:23 +00:00
Robert Watson
e812e4917d Dammit.
Trimmed an extra sysctl when I moved kern.suser_permitted from kern_mib.c
to kern_prot.c.  This commit should restore it, as well as fix the
resulting build problems.

Submitted by:	asmodai
2000-06-07 18:54:41 +00:00
Matt Jacob
5ce3b01ace Do an explicit getenv on boot_verbose. Now that we have a real FICL boot
loader for alpha (Yay!) we still need to explicitly look for boot_verbose-
I assume because the boothowto flags aren't passed to us at boot like x86.

Do some minor cosmetics as well.
2000-06-07 17:36:17 +00:00
Bill Paul
042c8f6ee1 When I tweaked if_dc.c to alter the polling interval for non-MII
21143 chips, I accidentally removed the DC_MII_REDUCED_POLL flag
for all 21143 cards. This caused problems with timer-instigated
TCP retransmits, which happened to occur at the same time as an
MII poll tick on MII-based cards (e.g. D-Link DFE-570TX). Fixed this,
plus made some other cleanups. The autoneg fixes for the non-MII
cards still work. Also tested the PNIC II now that I have one again.
2000-06-07 17:07:44 +00:00
Mitsuru IWASAKI
6b3f7b4cd3 Fix gdt pointer for the current cpu on SMP.
This will support power-off only.  Fix for suspend/resume will come later.
Also, MFC on this is shceduled on next week.

Submitted by:	sumitani@bd2.hnes.nec.co.jp
Reviewed by:	jlemon
2000-06-07 17:01:52 +00:00
Cameron Grant
1a50bd2e37 handle duplex properly in the AIOGCAP ioctl - this may (partially?) fix rat 2000-06-07 11:51:30 +00:00
Robert Watson
a996141f6e Introduce additional POSIX.1e-related stubs
o options CAPABILITIES
o kern/kern_cap.c -- syscall stubs returning ENOSYS

syscalls.master changes to follow

Obtained from:	TrustedBSD Project
2000-06-07 04:53:49 +00:00
Robert Watson
21d96c1df2 o Include file for POSIX.1e capabilities support
- Kernel and userland function calls
  - Struct describe capability set
  - Constants for individual capabilities (some POSIX.1e, some Linux,
    some BSD)

No supporting code to be committed yet, this commit allows dependent
development take place.

Reviewed by:	bde
Obtained from:	TrustedBSD Project
2000-06-07 03:40:55 +00:00
Greg Lehey
6b45806f44 start_object: Set the revive length correctly. 2000-06-07 03:34:18 +00:00
Daniel C. Sobral
7302acac1c Remove residual printf.
Prodded by: msmith
2000-06-07 03:33:12 +00:00
Greg Lehey
fe8b826551 revive_block:
Fix several instances of breakage in RAID-5 revive code.

   Tidy up code.

parityops:
   Don't attempt to do anything if the plex is degraded or worse.

parityrebuild:
   Add comments.
   Perform transfers in correct length.
2000-06-07 03:33:09 +00:00
Cameron Grant
24cd998f34 enable ds1 driver 2000-06-06 23:34:19 +00:00
Cameron Grant
2f9aa04e7f this driver does not support the cs4281 and probably never will, different code
will be required
2000-06-06 22:42:57 +00:00
Cameron Grant
dafad92c7d support recording 2000-06-06 22:34:09 +00:00
Cameron Grant
20cdda004b improve recording 2000-06-06 22:30:22 +00:00
Cameron Grant
9c3268206d don't panic if we try to add a channel we said we wouldn't 2000-06-06 22:24:53 +00:00
David E. O'Brien
b9b6854181 Properly spell "OSF/1". 2000-06-06 16:18:53 +00:00
Matthew Dillon
50ed7dfec0 INTR_TYPE_FAST / FAST_INTR interrupts (currently just serial interrupts)
have their own lock and do not need the MP lock.  The SMP cleanup was
    a little too conservative in MP locking fast interrupts but at least
    it's trivial to fix.  MFC soon.

Submitted by: bde
2000-06-06 15:28:00 +00:00
Joerg Wunsch
aaf8e08205 Mention that i4bisppp requires sppp; too many people use LINT as a
configuration guide and then miss this one.
2000-06-06 10:31:19 +00:00
KATO Takenori
e276b136e4 Merged from sys/i386/i386/machdep.c revision 1.394. 2000-06-06 08:21:59 +00:00
KATO Takenori
dc41b25cb0 Merged from sys/i386/isa/{clock.c,npx.c} revisions 1.151 and 1.82,
respectively.
2000-06-06 08:20:22 +00:00
KATO Takenori
7dca57550f Merged from sys/conf/Makefile.i386 revision 1.187. 2000-06-06 08:18:31 +00:00
KATO Takenori
031491c0a6 Merged from sys/i386/isa/npx.c revision 1.81. 2000-06-06 08:12:17 +00:00
Bill Paul
4d1f3470e3 - Call mii_pollstat() after we bring up the link on a 1000baseTX card
after autoneg so we make sure to set the link state and duplex mode
  correctly.
- Make sure to set the 'ignore pause frames' bit on the XMAC.
- Small linewrap fix.
2000-06-06 02:56:37 +00:00
Chris Costello
f574046378 Instead of completely disallowing VOP_SETATTR, just do it where there is
an underlying vnode.

Suggested by:	bde
2000-06-06 00:35:39 +00:00
Andrey A. Chernov
4d9a01eba4 Cosmetique: fix comments - don't use 'ansi' word for non-ansi (adapter) colors 2000-06-06 00:13:40 +00:00
David E. O'Brien
7a0e3a90cb Consistently protect f28 with noat/at pairs.
This may be be necessary.  But we are taking the conservative approach at
the moment.

Reviewed by:	mjacob, gallatin
2000-06-05 23:05:22 +00:00
Andrey A. Chernov
f9641ac41e Implement ANSI E[39m and E[49m to set fg and bg to initial (not to default!)
values. E[x is bad because set them to default values and should be used only
in reset sequence.
2000-06-05 22:16:11 +00:00
Bill Paul
b6a1416d3a Don't bother checking the link state in dcphy_status() if the interface
isn't up.
2000-06-05 19:37:15 +00:00
Robert Watson
579f4eb4cd o bde suggested moving the SYSCTL from kern_mib to the more appropriate
kern_prot, which cleans up some namespace issues
o Don't need a special handler to limit un-setting, as suser is used to
  protect suser_permitted, making it one-way by definition.

Suggested by:	bde
2000-06-05 18:30:55 +00:00
Robert Watson
0309554711 o Introduce kern.suser_permitted, a sysctl that disables the suser_xxx()
returning anything but EPERM.
o suser is enabled by default; once disabled, cannot be reenabled
o To be used in alternative security models where uid0 does not connote
  additional privileges
o Should be noted that uid0 still has some additional powers as it
  owns many important files and executables, so suffers from the same
  fundamental security flaws as securelevels.  This is fixed with
  MAC integrity protection code (in progress)
o Not safe for consumption unless you are *really* sure you don't want
  things like shutdown to work, et al :-)

Obtained from:	TrustedBSD Project
2000-06-05 14:53:55 +00:00
Robert Watson
192851dbff o Remove unneeded off_t variable to clean up compile warning
Obtained from:	TrustedBSD Project
2000-06-05 14:22:51 +00:00
Jeffrey Hsu
b10c4e187f Add missing increment of allocation counter. 2000-06-05 06:34:41 +00:00
Greg Lehey
f68de48880 parity ops: Correctly recognize the end of the plex. Previously we
were running off the end and generating worrying but harmless messages
about parity errors that wouldn't go away.
2000-06-05 03:01:07 +00:00
Duncan Barclay
5c0bff264f Cosmetic and capture a register dump _before_ I've downloaded values to
the card.
2000-06-04 21:14:57 +00:00