I found out that the input format of the Boemler list was different
than what the code expected: The last two fields were interpreted
as one. Checking the csv version of the list it showed that there
was sometimes a chipset number in the column before the card
description.
This is a rewrite to use the CSV format of the Boemler list. The
output is differently formatted: Instead of the "chip description",
it is now "description (chip)"
o add (required) cmd line args to specify the set of ifnet's to monitor
for WDS discovery msgs; "any" is a wildcard
o change the default script run on wds vap create to the "null script"
o auto-daemonize; add -f option to force foreground operation
o add -P option for integration with rc.d (implementation missing, tba)
o use syslog; default to log up to LOG_INFO, -t (terse) gives you up to
LOG_ERR, and -v (verbose) gives you up to LOG_DEBUG
o scan for existing vaps on startup to recover existing state
o correct some types
because it means getdelim() returns -1 for both error and EOF, and
never returns 0. However, this is what the original GNU implementation
does, and POSIX inherited the bug.
Reported by: marcus@
Not only did these two drivers depend on IFF_NEEDSGIANT, they were
broken 7 months ago during the MPSAFE TTY import. if_ppp(4) has been
replaced by ppp(8). There is no replacement for if_sl(4).
If we see regressions in for example the ports tree, we should just use
__FreeBSD_version 800045 to check whether if_ppp(4) and if_sl(4) are
present. Version 800045 is used to denote the import of MPSAFE TTY.
Discussed with: rwatson, but also rwatson's IFF_NEEDSGIANT emails on the
lists.
driver in Linux 2.6. uscanner was just a simple wrapper around a fifo and
contained no logic, the default interface is now libusb (supported by sane).
Reviewed by: HPS
This tool creates large numbers of TCP connections, each of which will
transmit a fixed amount of data, between client and server hosts. tcpp can
use multiple workers (typically up to the number of hardware cores), and can
use multiple source IPs in order to use an expanded port/IP 4-tuple space to
avoid problems from reusing 4-tuples too quickly. Aggregate bandwidth use
will be reported after a client run.
While by no means a perfect tool, it has proven quite useful in generating
and optimizing TCP stack lock contention by easily generating high-intensity
workloads. It also proves surprisingly good at finding device driver bugs.
colliding upper case letters as the lower case letter with a '_' in
front.
MFC after: 3 days
Discussed with: ed
Spotted by: Michael David Crawford <mdc at prgmr.com>
o turn off a bunch of stuff that's unlikely to be used
o add flash support
o use mii instead of miibus to save space
o enable tdma support
o configure legacy usb as usb2 works only on 2348 w/ 64M configs
The function pow() in libmp(3) clashes with pow(3) in libm. We could
rename this single function, but we can just take the same approach as
the Solaris folks did, which is to prefix all function names with mp_.
libmp(3) isn't really popular nowadays. I suspect not a single
application in ports depends on it. There's still a chance, so I've
increased the SHLIB_MAJOR and __FreeBSD_version.
Reviewed by: deischen, rdivacky
It is only really necessary for open(2)'s third argument, which is optional and
obtained through stdarg(3). open(2)'s third argument is 32bit and we pass 64
bits. On little endian it works, because we take lower 32 bits, but on big
endian platforms we take upper 32 bits, so we end up with 0.
Reported by: Milan Čermák <Milan.Cermak@Sun.COM>
allocated in a fork(2)-inheritable way at the beginning or end of an
accept(2) system call. This test creates a test thread and blocks it
in accept(2), then forks a child process which tests to see if the
next available file descriptor is defined or not (EBADF vs EINVAL for
ftruncate(2)).
This detects a regression introduced during the network stack locking
work, in which a very narrow race during which fork(2) from one
thread during accept(2) in a second thread lead to an extra inherited
file descriptor turned into a very wide race ensuring that a
descriptor was leaked into the child even though it hadn't been
returned.
PR: kern/130348
- Print human readable time as a float with two digits of precision. Use
ns now as well since clock periods are well into the hundreds of
picoseconds now.
- Show the average duration in the stats frame. This is often more useful
than total duration.
about invalid timestamps. Nehalem CPUs seem to be synchronized but only
within a fraction of a microsecond.
- Make the Counter code more flexible to poor timestamps. In general we
now complain a lot but render as much as we can.
- Change the scaler behavior so it works better with very long and very
short traces. We now set the maximum scale such that it properly
displays the entire file by default and doesn't permit zooming out
beyond the file. This improves other awkward navigation behavior.
The interval is now set very small which can't be achieved by simply
dragging the mouse. Clicking to the left of or right of the scaler bar
will produce increments of a single, very small, interval now.
Sponsored by: Nokia
printing it to the terminal. Now only parse errors go to the terminal.
- Speedup drawing by raising and lowering tags only once everything has
been drawn. Surprisingly, it now takes a little longer to parse than
it does to draw.
- Parameterize the layout with X_ and Y_ defines that determine the sizes
of various things.
- Remove unnecessary tags.
optimized single pass function for each. This reduces the number of
tkinter calls required to the minimum.
- Add a right-click context menu for sources. Supported commands hide
the source, hide the whole group the source is in, and bring up a stat
window.
- Add a source stat frame that gives an event frequency table as well as
the total duration for each event type that has a duration. This can
be used to see, for example, the total time a thread spent running or
blocked by a wchan or lock.
quoth the README:
I have been running -current on my laptop since before FreeBSD 2.0 was
released and along the way developed this little trick to making the
task easier.
sysbuild.sh is a way to build a new FreeBSD system on a computer from
a specification, while leaving the current installation intact.
sysbuild.sh assume you have two partitions that can hold your rootfs
and can be booted, and roughly speaking, all it does is build a new
system into the one you don't use, from the one you do use.
A partition named /freebsd is assumed to be part of your layout, and
that is where the sources and ports will be found.
If you know how nanobsd works, you will find a lot of similarity.
displaying sources.
- Add functions to the main SchedGraph to facilitate source hiding. The
source is simply moved off screen and all other sources are moved to
compensate.
This no longer requires any custom classes or parsers to support new
event types.
- Add an optional command line argument for specifying the clock frequency
in ghz. This is useful for traces that do not include KTR_SCHED.
Sponsored by: Nokia
- Add support for sorting rows by clicking and dragging them to their new
position.
- Add support for configuring the cpu background colors.
- Improve the scaling so a better center is maintained as you zoom. This
is not perfect due to precision loss with floats used in the window
views.
- Add new colors and a random assignment for unknown event types. A table
is used for known event types. This is the only event specific
information.
The jot(1) regression tests directory contained two tests named `wx' and
`wX', which doesn't work on case insensitive filesystems. Rename `wX' to
`wX1'.
MFC after: 1 month
- Callwheels traced via KTR_CALLOUT. Each CPU is assigned a callwheel
source. The events on this source are the execution of individual callout
routines. Each routine shows up as a green rectangle while it is executed
and the event details include the function pointer and argument.
- Locks traced via KTR_LOCK. Currently, each lock name is assigned an event
source (since the existing KTR_LOCK traces only include lock names and
not pointers). This does mean that if multiple locks of the same name are
manipulated, the source line for that name may be confusing. However, for
many cases this can be useful. Locks are blue when they are held and
purple when contested. The contention support is a bit weak due to
limitations in the rw_rlock() and mtx_lock_spin() logging messages
currently. I also have not added support for contention on lockmgr,
sx, or rmlocks yet. What is there now can be profitably used to examine
activity on Giant however.
- Expand the width of the event source names column a bit to allow for some
of the longer names of these new source types.
(threads, CPU load counters, etc.). Each source is tagged with a group
and an order similar to the SYSINIT SI_SUB_* and SI_ORDER_*. After
the file is parsed, all the sources are then sorted. Currently, the only
affects of this are that the CPU loads are now sorted by CPU ID (so
CPU 0 is always first). However, this makes it easier to add new types
of event sources in the future and have them all clustered together
instead of intertwined with threads.
- Python lists perform insertions at the tail much faster than insertions
at the head. For a trace that had a lot of events for a single event
source, the constant insertions of new events to the head of the
per-source event list caused a noticable slow down. To compensate,
append new events to the end of the list during parsing and then
reverse the list prior to drawing.
- Somewhere in the tkinter internals the coordinates of a canvas are
stored in a signed 32-bit integer. As a result, if an the box for
an event spans 2^31, it would actually end up having a negative
X offset at one end. The result was a single box that covered the
entire event source. Kris worked around this for some traces by
bumping up the initial ticks/pixel ratio from 1 to 10. However, a
divisor of 10 can still be too small for large tracefiles (e.g.
with 4 million entries). Instead of hardcoding the initial scaling
ratio, calculate it from the time span of the trace file.
- Add support for using the mouse wheel to scroll the graph window
up and down.
o add net80211 support for a tdma vap that is built on top of the
existing adhoc-demo support
o add tdma scheduling of frame transmission to the ath driver; it's
conceivable other devices might be capable of this too in which case
they can make use of the 802.11 protocol additions etc.
o add minor bits to user tools that need to know: ifconfig to setup and
configure, new statistics in athstats, and new debug mask bits
While the architecture can support >2 slots in a TDMA BSS the current
design is intended (and tested) for only 2 slots.
Sponsored by: Intel
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
"A function can be preceded by one or more '!' characters, in which
case the function shall be applied if the addresses do not select
the pattern space."
from one parent directory to another, in addition to the usual access checks
one also needs write access to the subdirectory being moved.
Approved by: rwatson (mentor), pjd
and server. This replaces the RPC implementation of the NFS client and
server with the newer RPC implementation originally developed
(actually ported from the userland sunrpc code) to support the NFS
Lock Manager. I have tested this code extensively and I believe it is
stable and that performance is at least equal to the legacy RPC
implementation.
The NFS code currently contains support for both the new RPC
implementation and the older legacy implementation inherited from the
original NFS codebase. The default is to use the new implementation -
add the NFS_LEGACYRPC option to fall back to the old code. When I
merge this support back to RELENG_7, I will probably change this so
that users have to 'opt in' to get the new code.
To use RPCSEC_GSS on either client or server, you must build a kernel
which includes the KGSSAPI option and the crypto device. On the
userland side, you must build at least a new libc, mountd, mount_nfs
and gssd. You must install new versions of /etc/rc.d/gssd and
/etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf.
As long as gssd is running, you should be able to mount an NFS
filesystem from a server that requires RPCSEC_GSS authentication. The
mount itself can happen without any kerberos credentials but all
access to the filesystem will be denied unless the accessing user has
a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There
is currently no support for situations where the ticket file is in a
different place, such as when the user logged in via SSH and has
delegated credentials from that login. This restriction is also
present in Solaris and Linux. In theory, we could improve this in
future, possibly using Brooks Davis' implementation of variant
symlinks.
Supporting RPCSEC_GSS on a server is nearly as simple. You must create
service creds for the server in the form 'nfs/<fqdn>@<REALM>' and
install them in /etc/krb5.keytab. The standard heimdal utility ktutil
makes this fairly easy. After the service creds have been created, you
can add a '-sec=krb5' option to /etc/exports and restart both mountd
and nfsd.
The only other difference an administrator should notice is that nfsd
doesn't fork to create service threads any more. In normal operation,
there will be two nfsd processes, one in userland waiting for TCP
connections and one in the kernel handling requests. The latter
process will create as many kthreads as required - these should be
visible via 'top -H'. The code has some support for varying the number
of service threads according to load but initially at least, nfsd uses
a fixed number of threads according to the value supplied to its '-n'
option.
Sponsored by: Isilon Systems
MFC after: 1 month
it relies on non-portable flock(2) semantics. Not only is flock(2) not
portable, but on some OSes that do have it, it is implemented in terms
of fcntl(2) locks, which are per-process rather than per-descriptor.
will cause it to return 0, not EAGAIN.
Add UNIX domain socket support to udpzerobyte, which suggests this
regression test should be moved to the general sockets test area rather
than netinet.
possible to make NanoBSD output more quite or verbose. The default
output should remain mostly unchanged. [1]
- Add missing shift for -i.
- Clean up usage() so it's now (mostly) sorted alphabetically.
- Make command line argument handling more consistent in the code and
remove redundant semicolons.
Reviwed by: phk [1]
* Allow the image name to be renamed via NANO_IMGNAME.
* Propagate TARGET_ARCH into src top level make targets
explicitly to support cross-building.
* Increase the default size of NanoBSD media from 488MB to
584MB to accomodate a -CURRENT world.
Reviewed by: phk
control over the result of buildworld and installworld; this especially
helps packaging systems such as nanobsd
Reviewed by: various (posted to arch)
MFC after: 1 month
