Use the Toeplitz hash value as source for the flowid. This makes the
hash value more suitable for so-called hash bucket algorithms which
are used in the FreeBSD's TCP/IP stack when RSS is enabled.
Sponsored by: Mellanox Technologies
MFC after: 1 week
ipoib module.
The bpfdetach() function is trying to turn off promiscious mode on the
network interface it is attached to while holding a mutex. The fix
consists of ignoring any further calls to the ipoib_ioctl() function
when the network interface is going to be detached. The ipoib_ioctl()
function might sleep.
Sponsored by: Mellanox Technologies
MFC after: 1 week
- Add some new hlist macros.
- Update existing hlist macros removing the need for a temporary
iteration variable.
- Properly define the RCU hlist macros to be SMP safe with regard
to RCU.
- Safe list macro arguments by adding a pair of parentheses.
- Prefix the _list_add() and _list_splice() functions with "linux"
to reflect they are LinuxKPI internal functions.
Obtained from: Linux
MFC after: 1 week
Sponsored by: Mellanox Technologies
The iWARP Connection Manager (CM) on FreeBSD creates a TCP socket to
represent an iWARP endpoint when the connection is over TCP. For
servers the current approach is to invoke create_listen callback for
each iWARP RNIC registered with the CM. This doesn't work too well for
INADDR_ANY because a listen on any TCP socket already notifies all
hardware TOEs/RNICs of the new listener. This patch fixes the server
side of things for FreeBSD. We've tried to keep all these modifications
in the iWARP/TCP specific parts of the OFED infrastructure as much as
possible.
Submitted by: Krishnamraju Eraparaju @ Chelsio (with design inputs from Steve Wise)
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D4801
The only piece of information that is required is rt_flags subset.
In particular, if_loop() requires RTF_REJECT and RTF_BLACKHOLE flags
to check if this particular mbuf needs to be dropped (and what
error should be returned).
Note that if_loop() will always return EHOSTUNREACH for "reject" routes
regardless of RTF_HOST flag existence. This is due to upcoming routing
changes where RTF_HOST value won't be available as lookup result.
All other functions require RTF_GATEWAY flag to check if they need
to return EHOSTUNREACH instead of EHOSTDOWN error.
There are 11 places where non-zero 'struct route' is passed to if_output().
For most of the callers (forwarding, bpf, arp) does not care about exact
error value. In fact, the only place where this result is propagated
is ip_output(). (ip6_output() passes NULL route to nd6_output_ifp()).
Given that, add 3 new 'struct route' flags (RT_REJECT, RT_BLACKHOLE and
RT_IS_GW) and inline function (rt_update_ro_flags()) to copy necessary
rte flags to ro_flags. Call this function in ip_output() after looking up/
verifying rte.
Reviewed by: ae
sbappendstream() does. Although, M_NOTREADY may appear only on SOCK_STREAM
sockets, due to sendfile(2) supporting only the latter, there is a corner
case of AF_UNIX/SOCK_STREAM socket, that still uses records for the sake
of control data, albeit being stream socket.
Provide private version of m_clrprotoflags(), which understands PRUS_NOTREADY,
similar to m_demote().
Add if_requestencap() interface method which is capable of calculating
various link headers for given interface. Right now there is support
for INET/INET6/ARP llheader calculation (IFENCAP_LL type request).
Other types are planned to support more complex calculation
(L2 multipath lagg nexthops, tunnel encap nexthops, etc..).
Reshape 'struct route' to be able to pass additional data (with is length)
to prepend to mbuf.
These two changes permits routing code to pass pre-calculated nexthop data
(like L2 header for route w/gateway) down to the stack eliminating the
need for other lookups. It also brings us closer to more complex scenarios
like transparently handling MPLS nexthops and tunnel interfaces.
Last, but not least, it removes layering violation introduced by flowtable
code (ro_lle) and simplifies handling of existing if_output consumers.
ARP/ND changes:
Make arp/ndp stack pre-calculate link header upon installing/updating lle
record. Interface link address change are handled by re-calculating
headers for all lles based on if_lladdr event. After these changes,
arpresolve()/nd6_resolve() returns full pre-calculated header for
supported interfaces thus simplifying if_output().
Move these lookups to separate ether_resolve_addr() function which ether
returs error or fully-prepared link header. Add <arp|nd6_>resolve_addr()
compat versions to return link addresses instead of pre-calculated data.
BPF changes:
Raw bpf writes occupied _two_ cases: AF_UNSPEC and pseudo_AF_HDRCMPLT.
Despite the naming, both of there have ther header "complete". The only
difference is that interface source mac has to be filled by OS for
AF_UNSPEC (controlled via BIOCGHDRCMPLT). This logic has to stay inside
BPF and not pollute if_output() routines. Convert BPF to pass prepend data
via new 'struct route' mechanism. Note that it does not change
non-optimized if_output(): ro_prepend handling is purely optional.
Side note: hackish pseudo_AF_HDRCMPLT is supported for ethernet and FDDI.
It is not needed for ethernet anymore. The only remaining FDDI user is
dev/pdq mostly untouched since 2007. FDDI support was eliminated from
OpenBSD in 2013 (sys/net/if_fddisubr.c rev 1.65).
Flowtable changes:
Flowtable violates layering by saving (and not correctly managing)
rtes/lles. Instead of passing lle pointer, pass pointer to pre-calculated
header data from that lle.
Differential Revision: https://reviews.freebsd.org/D4102
vtophys() when loading mbufs for transmission and reception. While at
it all pointer arithmetic and cast qualifier issues were fixed, mostly
related to transmission and reception.
MFC after: 1 week
Sponsored by: Mellanox Technologies
Differential Revision: https://reviews.freebsd.org/D4284
- Added support for dumping the SFP EEPROM content to dmesg.
- Fixed handling of network interface capability IOCTLs.
- Fixed race when loading and unloading the mlxen driver by applying
appropriate locking.
- Removed two unused C-files.
MFC after: 1 week
Submitted by: Mark Bloch <markb@mellanox.com>
Sponsored by: Mellanox Technologies
Differential Revision: https://reviews.freebsd.org/D4283
using GCC for 32-bit platforms. The integer size in this case is
hardcoded 64-bit while the pointer size is 32-bit.
Sponsored by: Mellanox Technologies
MFC after: 2 weeks
- Move all files related to the LinuxKPI into sys/compat/linuxkpi and
its subfolders.
- Update sys/conf/files and some Makefiles to use new file locations.
- Added description of COMPAT_LINUXKPI to sys/conf/NOTES which in turn
adds the LinuxKPI to all LINT builds.
- The LinuxKPI can be added to the kernel by setting the
COMPAT_LINUXKPI option. The OFED kernel option no longer builds the
LinuxKPI into the kernel. This was done to keep the build rules for
the LinuxKPI in sys/conf/files simple.
- Extend the LinuxKPI module to include support for USB by moving the
Linux USB compat from usb.ko to linuxkpi.ko.
- Bump the FreeBSD_version.
- A universe kernel build has been done.
Reviewed by: np @ (cxgb and cxgbe related changes only)
Sponsored by: Mellanox Technologies
- Remove redundant NBLONG macro and use BIT_WORD()
and BIT_MASK() instead.
- Correctly define BIT_MASK() according to Linux and
update all users of this macro.
- Add missing GENMASK() macro.
- Remove all comments deriving from Linux.
Sponsored by: Mellanox Technologies
- Redefine DIV_ROUND_UP as a function macro taking two arguments
instead of none.
- Implement more Linux kernel functions related to various forms
of DELAY() and basic mathematical operations.
Sponsored by: Mellanox Technologies
- Define the kref structure identical to the one found in Linux.
- Update clients referring inside the kref structure.
- Implement kref_sub() for FreeBSD.
Reviewed by: np @
Sponsored by: Mellanox Technologies
- Reimplement ktime header file to distinguish more from Linux.
- Add new time header file to handle time related Linux functions.
Sponsored by: Mellanox Technologies
- Avoid using PAGE_MASK, because Linux defines it differently.
Use (PAGE_SIZE - 1) instead.
- Add support for for_each_sg_page() and sg_page_iter_dma_address().
Sponsored by: Mellanox Technologies
- Added support for multiple new Linux functions.
- Properly implement DEFINE_WAIT() and init_waitqueue_head() macros.
- Removed FreeBSD specific __wait_queue_head structure definition.
Sponsored by: Mellanox Technologies
