This is mostly an exercise to set variables to NULL/0 when declared, but
one was ensuring a string variable was set before printing it.
We should never see "<unknown>" in a printed rule; if we do then this code
definitely has some bugs that need addressing.
command to simplify firewall reloading.
The `missing` option suppresses EEXIST error code, but does check that
existing table has the same parameters as new one. The `or-flush` option
implies `missing` option and additionally does flush for table if it
is already exist.
Submitted by: lev
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D18339
Properly pass down is_all to table_show_list(). This restores the behavior
before r272840 so that only 'ipfw table all list' shows the headers.
MFC after: 2 weeks
Relnotes: yes
The lookup_host() helper subroutine emits a struct in_addr value in network
byte order via caller passed pointer. However, the table value is expected
to be stored in host byte order. On little-endian machines, this produced a
reversed endian table value for Legacy or IPv4 table types when the value
was a hostname (instead of a plain IP address).
Fix by using ntohl() on the output 32-bit address.
While here, avoid some aliasing violations by storing the lookup_host()
output in an intermediate object of the correct type.
PR: 226429
Reported by: bugs.freebsd.org AT mx.zzux.com (also: Tested by)
Security: ipfw hostname table rules could potentially not act as admin intended
Sponsored by: Dell EMC Isilon
The module works together with ipfw(4) and implemented as its external
action module.
Stateless NAT64 registers external action with name nat64stl. This
keyword should be used to create NAT64 instance and to address this
instance in rules. Stateless NAT64 uses two lookup tables with mapped
IPv4->IPv6 and IPv6->IPv4 addresses to perform translation.
A configuration of instance should looks like this:
1. Create lookup tables:
# ipfw table T46 create type addr valtype ipv6
# ipfw table T64 create type addr valtype ipv4
2. Fill T46 and T64 tables.
3. Add rule to allow neighbor solicitation and advertisement:
# ipfw add allow icmp6 from any to any icmp6types 135,136
4. Create NAT64 instance:
# ipfw nat64stl NAT create table4 T46 table6 T64
5. Add rules that matches the traffic:
# ipfw add nat64stl NAT ip from any to table(T46)
# ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96
6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96
via NAT64 host.
Stateful NAT64 registers external action with name nat64lsn. The only
one option required to create nat64lsn instance - prefix4. It defines
the pool of IPv4 addresses used for translation.
A configuration of instance should looks like this:
1. Add rule to allow neighbor solicitation and advertisement:
# ipfw add allow icmp6 from any to any icmp6types 135,136
2. Create NAT64 instance:
# ipfw nat64lsn NAT create prefix4 A.B.C.D/28
3. Add rules that matches the traffic:
# ipfw add nat64lsn NAT ip from any to A.B.C.D/28
# ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96
4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96
via NAT64 host.
Obtained from: Yandex LLC
Relnotes: yes
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D6434
so when user did `ipfw table N flush` it always worked, but now
when table N doesn't exist the kernel returns ESRCH error.
This isn't fatal error for flush and destroy commands. Do not
call err(3) when errno is equal to ESRCH. Also warn only when
quiet mode isn't enabled. This fixes a regression in behavior,
when old rules are loaded from file.
Also use correct value for switch in the table_swap().
Reported by: Kevin Oberman
MFC after: 3 days
It allows implementing loadable kernel modules with new actions and
without needing to modify kernel headers and ipfw(8). The module
registers its action handler and keyword string, that will be used
as action name. Using generic syntax user can add rules with this
action. Also ipfw(8) can be easily modified to extend basic syntax
for external actions, that become a part base system.
Sample modules will coming soon.
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
Currently we have different table key types which can easily interfere
with each other (numbers and IPv4 address, interface names and hostnames,
flows and hostnames/addresses).
This conflicts are solved by [auto-]creating _typed_ tables, so after
table is created, only keys of given type can be inserted to that table.
ipfw(8) consults with kernel about key/value type for particular table so
it knows key/value interpretation.
However, we have 2 cases (adding entries to non-existing table and
parsing configuration file via `ipfw -n`) when kernel is unable to
provide us table info we need. Fix the latter case by partially importing
old `table_fill_xentry()` parse function responsible for guessing key type.
Sponsored by: Yandex LLC
to obtain IPv4 next hop address in tablearg case.
Add `fwd tablearg' support for IPv6. ipfw(8) uses INADDR_ANY as next hop
address in O_FORWARD_IP opcode for specifying tablearg case. For IPv6 we
still use this opcode, but when packet identified as IPv6 packet, we
obtain next hop address from dedicated field nh6 in struct table_value.
Replace hopstore field in struct ip_fw_args with anonymous union and add
hopstore6 field. Use this field to copy tablearg value for IPv6.
Replace spare1 field in struct table_value with zoneid. Use it to keep
scope zone id for link-local IPv6 addresses. Since spare1 was used
internally, replace spare0 array with two variables spare0 and spare1.
Use getaddrinfo(3)/getnameinfo(3) functions for parsing and formatting
IPv6 addresses in table_value. Use zoneid field in struct table_value
to store sin6_scope_id value.
Since the kernel still uses embedded scope zone id to represent
link-local addresses, convert next_hop6 address into this form before
return from pfil processing. This also fixes in6_localip() check
for link-local addresses.
Differential Revision: https://reviews.freebsd.org/D2015
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
This is the last major change in given branch.
Kernel changes:
* Use 64-bytes structures to hold multi-value variables.
* Use shared array to hold values from all tables (assume
each table algo is capable of holding 32-byte variables).
* Add some placeholders to support per-table value arrays in future.
* Use simple eventhandler-style API to ease the process of adding new
table items. Currently table addition may required multiple UH drops/
acquires which is quite tricky due to atomic table modificatio/swap
support, shared array resize, etc. Deal with it by calling special
notifier capable of rolling back state before actually performing
swap/resize operations. Original operation then restarts itself after
acquiring UH lock.
* Bump all objhash users default values to at least 64
* Fix custom hashing inside objhash.
Userland changes:
* Add support for dumping shared value array via "vlist" internal cmd.
* Some small print/fill_flags dixes to support u32 values.
* valtype is now bitmask of
<skipto|pipe|fib|nat|dscp|tag|divert|netgraph|limit|ipv4|ipv6>.
New values can hold distinct values for each of this types.
* Provide special "legacy" type which assumes all values are the same.
* More helpers/docs following..
Some examples:
3:41 [1] zfscurr0# ipfw table mimimi create valtype skipto,limit,ipv4,ipv6
3:41 [1] zfscurr0# ipfw table mimimi info
+++ table(mimimi), set(0) +++
kindex: 2, type: addr
references: 0, valtype: skipto,limit,ipv4,ipv6
algorithm: addr:radix
items: 0, size: 296
3:42 [1] zfscurr0# ipfw table mimimi add 10.0.0.5 3000,10,10.0.0.1,2a02:978:2::1
added: 10.0.0.5/32 3000,10,10.0.0.1,2a02:978:2::1
3:42 [1] zfscurr0# ipfw table mimimi list
+++ table(mimimi), set(0) +++
10.0.0.5/32 3000,0,10.0.0.1,2a02:978:2::1
* Since there seems to be lack of consensus on strict value typing,
remove non-default value types. Use userland-only "value format type"
to print values.
Kernel changes:
* Add IP_FW_XMODIFY to permit table run-time modifications.
Currently we support changing limit and value format type.
Userland changes:
* Support IP_FW_XMODIFY opcode.
* Support specifying value format type (ftype) in tablble create/modify req
* Fine-print value type/value format type.
Kernel changes:
* Add opcode IP_FW_TABLE_XSWAP
* Add support for swapping 2 tables with the same type/ftype/vtype.
* Make skipto cache init after ipfw locks init.
Userland changes:
* Add "table X swap Y" command.
Kernel changes:
* Add TEI_FLAGS_DONTADD entry flag to indicate that insert is not possible
* Support given flag in all algorithms
* Add "limit" field to ipfw_xtable_info
* Add actual limiting code into add_table_entry()
Userland changes:
* Add "limit" option as "create" table sub-option. Limit modification
is currently impossible.
* Print human-readable errors in table enry addition/deletion code.
* Add "flow:hash" algorithm
Kernel changes:
* Add O_IP_FLOW_LOOKUP opcode to support "flow" lookups
* Add IPFW_TABLE_FLOW table type
* Add "struct tflow_entry" as strage for 6-tuple flows
* Add "flow:hash" algorithm. Basically it is auto-growing chained hash table.
Additionally, we store mask of fields we need to compare in each instance/
* Increase ipfw_obj_tentry size by adding struct tflow_entry
* Add per-algorithm stat (ifpw_ta_tinfo) to ipfw_xtable_info
* Increase algoname length: 32 -> 64 (algo options passed there as string)
* Assume every table type can be customized by flags, use u8 to store "tflags" field.
* Simplify ipfw_find_table_entry() by providing @tentry directly to algo callback.
* Fix bug in cidr:chash resize procedure.
Userland changes:
* add "flow table(NAME)" syntax to support n-tuple checking tables.
* make fill_flags() separate function to ease working with _s_x arrays
* change "table info" output to reflect longer "type" fields
Syntax:
ipfw table fl2 create type flow:[src-ip][,proto][,src-port][,dst-ip][dst-port] [algo flow:hash]
Examples:
0:02 [2] zfscurr0# ipfw table fl2 create type flow:src-ip,proto,dst-port algo flow:hash
0:02 [2] zfscurr0# ipfw table fl2 info
+++ table(fl2), set(0) +++
kindex: 0, type: flow:src-ip,proto,dst-port
valtype: number, references: 0
algorithm: flow:hash
items: 0, size: 280
0:02 [2] zfscurr0# ipfw table fl2 add 2a02:6b8::333,tcp,443 45000
0:02 [2] zfscurr0# ipfw table fl2 add 10.0.0.92,tcp,80 22000
0:02 [2] zfscurr0# ipfw table fl2 list
+++ table(fl2), set(0) +++
2a02:6b8::333,6,443 45000
10.0.0.92,6,80 22000
0:02 [2] zfscurr0# ipfw add 200 count tcp from me to 78.46.89.105 80 flow 'table(fl2)'
00200 count tcp from me to 78.46.89.105 dst-port 80 flow table(fl2)
0:03 [2] zfscurr0# ipfw show
00200 0 0 count tcp from me to 78.46.89.105 dst-port 80 flow table(fl2)
65535 617 59416 allow ip from any to any
0:03 [2] zfscurr0# telnet -s 10.0.0.92 78.46.89.105 80
Trying 78.46.89.105...
..
0:04 [2] zfscurr0# ipfw show
00200 5 272 count tcp from me to 78.46.89.105 dst-port 80 flow table(fl2)
65535 682 66733 allow ip from any to any
Kernel changes:
* s/IPFW_TABLE_U32/IPFW_TABLE_NUMBER/
* Force "lookup <port|uid|gid|jid>" to be IPFW_TABLE_NUMBER
* Support "lookup" method for number tables
* Add number:array algorihm (i32 as key, auto-growing).
Userland changes:
* Support named tables in "lookup <tag> Table"
* Fix handling of "table(NAME,val)" case
* Support printing "number" table data.
* Rewrite interface tables to use interface indexes
Kernel changes:
* Add generic interface tracking API:
- ipfw_iface_ref (must call unlocked, performs lazy init if needed, allocates
state & bumps ref)
- ipfw_iface_add_ntfy(UH_WLOCK+WLOCK, links comsumer & runs its callback to
update ifindex)
- ipfw_iface_del_ntfy(UH_WLOCK+WLOCK, unlinks consumer)
- ipfw_iface_unref(unlocked, drops reference)
Additionally, consumer callbacks are called in interface withdrawal/departure.
* Rewrite interface tables to use iface tracking API. Currently tables are
implemented the following way:
runtime data is stored as sorted array of {ifidx, val} for existing interfaces
full data is stored inside namedobj instance (chained hashed table).
* Add IP_FW_XIFLIST opcode to dump status of tracked interfaces
* Pass @chain ptr to most non-locked algorithm callbacks:
(prepare_add, prepare_del, flush_entry ..). This may be needed for better
interaction of given algorithm an other ipfw subsystems
* Add optional "change_ti" algorithm handler to permit updating of
cached table_info pointer (happens in case of table_max resize)
* Fix small bug in ipfw_list_tables()
* Add badd (insert into sorted array) and bdel (remove from sorted array) funcs
Userland changes:
* Add "iflist" cmd to print status of currently tracked interface
* Add stringnum_cmp for better interface/table names sorting
* Add resize callbacks for upcoming table-based algorithms.
Kernel changes:
* s/ipfw_modify_table/ipfw_manage_table_ent/
* Simplify add_table_entry(): make table creation a separate piece of code.
Do not perform creation if not in "compat" mode.
* Add ability to perform modification of algorithm state (like table resize).
The following callbacks were added:
- prepare_mod (allocate new state, without locks)
- fill_mod (UH_WLOCK, copy old state to new one)
- modify (UH_WLOCK + WLOCK, switch state)
- flush_mod (no locks, flushes allocated data)
Given callbacks are called if table modification has been requested by add or
delete callbacks. Additional u64 tc->'flags' field was added to pass these
requests.
* Change add/del table ent format: permit adding/removing multiple entries
at once (only 1 supported at the moment).
Userland changes:
* Auto-create tables with warning
* Bump table dump format preserving old ABI.
Kernel size:
* Add IP_FW_TABLE_XFIND to handle "lookup" request from userland.
* Add ta_find_tentry() algorithm callbacks/handlers to support lookups.
* Fully switch to ipfw_obj_tentry for various table dumps:
algorithms are now required to support the latest (ipfw_obj_tentry) entry
dump format, the rest is handled by generic dump code.
IP_FW_TABLE_XLIST opcode version bumped (0 -> 1).
* Eliminate legacy ta_dump_entry algo handler:
dump_table_entry() converts data from current to legacy format.
Userland side:
* Add "lookup" table parameter.
* Change the way table type is guessed: call table_get_info() first,
and check value for IPv4/IPv6 type IFF table does not exist.
* Fix table_get_list(): do more tries if supplied buffer is not enough.
* Sparate table_show_entry() from table_show_list().
