According to information found on the internet the following products
use exactly the same hardware but probably different USB IDs:
- Edimax EW-7811Un V2 (v2)
- Edimax EW-7811GLN 2.0A (v2)
I am not adding them as I cannot verify.
PR: 254280
MFC after: 1 week
This is a MAC policy module that grants scheduling privileges based on
group membership. Users or processes in the group realtime (gid 47) are
allowed to run threads and processes with realtime scheduling priority.
For timing-sensitive, low-latency software like audio/jack, running with
realtime priority helps to avoid stutter and gaps.
PR: 239125
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D33191
The inclusion of 0a0f748641 broke the build with the -DNO_ROOT option.
Specifically, that commit adds some relative paths (with `..`) to METALOG
that make other tools using that log, fail afterwards (tar, makefs...).
It's been argued[1] if this is really something mtree(8) should handle more
graciously. In the meantime, fix the breakage but changing the order in which
the links are created: first in the parent directory, then in the
architecture-specific one.
We keep the architecture-specific directories an the links to the parent
directories. This is something that we might want to change in the future.
This commit is based on a concept patch by avg@.
[1] https://lists.freebsd.org/archives/dev-commits-src-all/2021-November/index.html
Reported by: bapt@, emaste@
Approved by: avg@
Fixes: 0a0f748641
Differential Revision: https://reviews.freebsd.org/D33126
Belatedly remove twa(4). It was supposed to go before 13.0, but was
overlooked.
Sponsored by: Netflix
Relnotes: yes
Reviewed by: scottl
Differential Revision: https://reviews.freebsd.org/D33114
Belatedly remove esp(4). It was tagged as gone in 13, but was overlooked
until now.
Sponsored by: Netflix
Reviewed by: scottl
Differential Revision: https://reviews.freebsd.org/D33115
Belatedly remove amr(4). It was slated to depart before 13.0 but was
overlooked until now.
Sponsored by: Netflix
Relnotes: yes
Reviewed by: scottl
Differential Revision: https://reviews.freebsd.org/D33113
Belatedly remove iir(4). It was slated to go before 13, but was
overlooked.
Sponsored by: Netflix
Relnotes: yes
Reviewed by: scottl
Differential Revision: https://reviews.freebsd.org/D33112
We'd said this was going away in 13, but was overlooked. Belatedly
remove.
Sponsored by: Netflix
Relnotes: yes
Reviewed by: scottl
Differential Revision: https://reviews.freebsd.org/D33111
This adds a new ng_device command, NGM_DEVICE_ETHERALIGN, which has no
associated args. After the command arrives, the device begins adjusting all
packets sent out its hook to have ETHER_ALIGN bytes of padding at the
beginning of the packet. The ETHER_ALIGN padding is added only when
running on an architecture that requires strict alignment of IP headers
(based on the __NO_STRICT_ALIGNMENT macro, which is only #define'd on
x86 as of this writing).
This also adds ascii <-> binary command translation to ng_device, both for
the existing NGM_DEVICE_GET_DEVNAME and the new ETHERALIGN command.
This also gives a name to every ng_device node when it is constructed, using
the cdev device name (ngd0, ngd1, etc). This makes it easier to address
command msgs to the device using ngctl(8).
Reviewed by: donner, ray, adrian
Differential Revision: https://reviews.freebsd.org/D32905
MFC after: 1 week
Drop packets arriving from the network that have our source IPv6
address. If maliciously crafted they can create evil effects
like an RST exchange between two of our listening TCP ports.
Such packets just can't be legitimate. Enable the tunable
by default. Long time due for a modern Internet host.
Reviewed by: melifaro, donner, kp
Differential revision: https://reviews.freebsd.org/D32915
Drop packets arriving from the network that have our source IP
address. If maliciously crafted they can create evil effects
like an RST exchange between two of our listening TCP ports.
Such packets just can't be legitimate. Enable the tunable
by default. Long time due for a modern Internet host.
Reviewed by: donner, melifaro
Differential revision: https://reviews.freebsd.org/D32914
This very questionable feature was enabled in FreeBSD for a very short
time. It was disabled very soon upon merging to RELENG_4 - 23d7f14119.
And in HEAD was also disabled pretty soon - 4bc37f9836.
The tunable has very vague name. Check interface for what? Given that
it was never documented and almost never enabled, I think it is fine
to rename it together with documenting it.
Also, count packets dropped by this tunable as ips_badaddr, otherwise
they fall down to ips_cantforward counter, which is misleading, as
packet was not supposed to be forwarded, it was destined locally.
Reviewed by: donner, kp
Differential revision: https://reviews.freebsd.org/D32912
NOTE: HEADS UP read the note below if your kernel config is not including GENERIC!!
This patch does a bit of cleanup on TCP congestion control modules. There were some rather
interesting surprises that one could get i.e. where you use a socket option to change
from one CC (say cc_cubic) to another CC (say cc_vegas) and you could in theory get
a memory failure and end up on cc_newreno. This is not what one would expect. The
new code fixes this by requiring a cc_data_sz() function so we can malloc with M_WAITOK
and pass in to the init function preallocated memory. The CC init is expected in this
case *not* to fail but if it does and a module does break the
"no fail with memory given" contract we do fall back to the CC that was in place at the time.
This also fixes up a set of common newreno utilities that can be shared amongst other
CC modules instead of the other CC modules reaching into newreno and executing
what they think is a "common and understood" function. Lets put these functions in
cc.c and that way we have a common place that is easily findable by future developers or
bug fixers. This also allows newreno to evolve and grow support for its features i.e. ABE
and HYSTART++ without having to dance through hoops for other CC modules, instead
both newreno and the other modules just call into the common functions if they desire
that behavior or roll there own if that makes more sense.
Note: This commit changes the kernel configuration!! If you are not using GENERIC in
some form you must add a CC module option (one of CC_NEWRENO, CC_VEGAS, CC_CUBIC,
CC_CDG, CC_CHD, CC_DCTCP, CC_HTCP, CC_HD). You can have more than one defined
as well if you desire. Note that if you create a kernel configuration that does not
define a congestion control module and includes INET or INET6 the kernel compile will
break. Also you need to define a default, generic adds 'options CC_DEFAULT=\"newreno\"
but you can specify any string that represents the name of the CC module (same names
that show up in the CC module list under net.inet.tcp.cc). If you fail to add the
options CC_DEFAULT in your kernel configuration the kernel build will also break.
Reviewed by: Michael Tuexen
Sponsored by: Netflix Inc.
RELNOTES:YES
Differential Revision: https://reviews.freebsd.org/D32693
Recent firmwares have more leeway in FEC selection and there is a need
to track the FECs requested by the driver separately from the FEC in use
on the link. The existing dev.<port>.<inst>.fec sysctl can read both but
its behavior depends on the link state and it is sometimes hard to find
out what was requested when the link is up.
Split the fec sysctl into two (requested_fec and link_fec) to get access
to both pieces of information regardless of the link state.
MFC after: 1 week
Sponsored by: Chelsio Communications
AES-CBC OpenSSL assembly is used underneath.
The glue layer(ossl_aes.c) is based on CHACHA20 implementation.
Contrary to the SHA and CHACHA20, AES OpenSSL assembly logic
does not have a fallback implementation in case CPU doesn't
support required instructions.
Because of that CPU caps are checked during initialization and AES
support is advertised only if available.
The feature is available on all architectures that ossl supports:
i386, amd64, arm64.
The biggest advantage of this patch over existing solutions
(aesni(4) and armv8crypto(4)) is that it supports SHA,
allowing for ETA operations.
Sponsored by: Stormshield
Obtained from: Semihalf
Reviewed by: jhb (previous version)
Differential revision: https://reviews.freebsd.org/D32099
AES-CBC OpenSSL assembly is used underneath.
The glue layer(ossl_aes.c) is based on CHACHA20 implementation.
Contrary to the SHA and CHACHA20, AES OpenSSL assembly logic
does not have a fallback implementation in case CPU doesn't
support required instructions.
Because of that CPU caps are checked during initialization and AES
support is advertised only if available.
The feature is available on all architectures that ossl supports:
i386, amd64, arm64.
The biggest advantage of this patch over existing solutions
(aesni(4) and armv8crypto(4)) is that it supports SHA,
allowing for ETA operations.
Sponsored by: Stormshield
Obtained from: Semihalf
Reviewed by: jhb
Differential revision: https://reviews.freebsd.org/D32099
You can wire da, ada and nda device units to serial numbers. sdda cannot
be wired like this because SD and MMC cards lack serial numbers (or at
the very least CAMMMC does not query or retain them).
Sponsored by: Netflix
Reviewed by: bcr
Differential Revision: https://reviews.freebsd.org/D32825
Unwired units start with the first avaialble unit that hasn't been
wired, not one greater than the largest wired unit. wired units are
skipped when assigning unwired units a number.
Sponsored by: Netflix
Reviewed by: bcr
Differential Revision: https://reviews.freebsd.org/D32824
Allow users to set a number on rules which will be exposed as part of
the pflog header.
The intent behind this is to allow users to correlate rules across
updates (remember that pf rules continue to exist and match existing
states, even if they're removed from the active ruleset) and pflog.
Obtained from: pfSense
MFC after: 3 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D32750
I made a mistaking in merging the final commits for the devctl changes. This
adds the 'hushed' variable and has the correct dates for the manuals.
Pointy hat to: imp
Generate VT events when the bell beeps. When coupled with disabling the
bell,this allows custom bells to be rung when we'd otherwise beep.
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D32656
In most cases blackholing for locally originated packets is undesired,
leads to different kind of lags and delays. Provide sysctls to enforce
it, e.g. for debugging purposes.
Reviewed by: rrs
Differential revision: https://reviews.freebsd.org/D32718
The new iSCSI initiator iscsi(4) was introduced with FreeBSD 10.0, and
the old intiator was marked obsolete shortly thereafter (in commit
d32789d95c, MFC'd to stable/10 in ba54910169). Remove it now.
Reviewed by: jhb, mav
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32673
The last two drivers that required sppp are cp(4) and ce(4).
These devices are still produced and can be purchased
at Cronyx <http://cronyx.ru/hardware/wan.html>.
Since Roman Kurakin <rik@FreeBSD.org> has quit them, they no
longer support FreeBSD officially. Later they have dropped
support for Linux drivers to. As of mid-2020 they don't even
have a developer to maintain their Windows driver. However,
their support verbally told me that they could provide aid to
a FreeBSD developer with documentaion in case if there appears
a new customer for their devices.
These drivers have a feature to not use sppp(4) and create an
interface, but instead expose the device as netgraph(4) node.
Then, you can attach ng_ppp(4) with help of ports/net/mpd5 on
top of the node and get your synchronous PPP. Alternatively
you can attach ng_frame_relay(4) or ng_cisco(4) for HDLC.
Actually, last time I used cp(4) back in 2004, using netgraph(4)
instead of sppp(4) was already the right way to do.
Thus, remove the sppp(4) related part of the drivers and enable
by default the negraph(4) part. Further maintenance of these
drivers in the tree shouldn't be a big deal.
While doing that, remove some cruft and enable cp(4) compilation
on amd64. The ce(4) for some unknown reason marks its internal
DDK functions with __attribute__ fastcall, which most likely is
safe to remove, but without hardware I'm not going to do that, so
ce(4) remains i386-only.
Reviewed by: emaste, imp, donner
Differential Revision: https://reviews.freebsd.org/D32590
See also: https://reviews.freebsd.org/D23928
rarpd.c was modified in r19859 to use REVARP_REQUEST instead of
ARPOP_REVREQUEST.
PR: 183333
MFC after: 3 days
Reported by: pluknet <pluknet@gmail.com>
Add 'ivlen' and 'maclen' fields to the structure used for CIOGSESSION2
to specify the explicit IV/nonce and MAC/tag lengths for crypto
sessions. If these fields are zero, the default lengths are used.
This permits selecting an alternate nonce length for AEAD ciphers such
as AES-CCM which support multiple nonce leengths. It also supports
truncated MACs as input to AEAD or ETA requests.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32107
The FreeBSD nvme driver has reset the nvme controller twice on attach to
address a theoretical issue assuring the hardware is in a known
state. However, exierence has shown the second reset is unnecessary and
increases the time to boot. Eliminate the second reset. Should there be
a situation when you need a second reset (for buggy or at least somewhat
out of the mainstream hardware), the hardware option NVME_2X_RESET will
restore the old behavior. Document this in nvme(4).
If there's any trouble at all with this, I'll add a sysctl tunable to
control it.
Sponsored by: Netflix
Reviewed by: cperciva, mav
Differential Revision: https://reviews.freebsd.org/D32241
The ng_h4 module was disconnected 13 years ago when the tty later was
locked by Ed. It completely fails to compile, and has a number of false
positives for Giant use. Remove it for lack of interest. Bluetooth has
largely (completely?) moved on from bluetooth over UART transport.
OK'd by: emax
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D31846
It supports the following Microchip devices:
LAN7430 PCIe Gigabit Ethernet controller with PHY
LAN7431 PCIe Gigabit Ethernet controller with RGMII interface
The driver has a number of caveats and limitations, but is functional.
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Be explicit that the driver has caveats and limitations, and remove the
note about not being connected to the build: I plan to connect it soon.
(Also the note serves no real purpose in a man page that is not
installed.)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
