o add net80211 support for a tdma vap that is built on top of the
existing adhoc-demo support
o add tdma scheduling of frame transmission to the ath driver; it's
conceivable other devices might be capable of this too in which case
they can make use of the 802.11 protocol additions etc.
o add minor bits to user tools that need to know: ifconfig to setup and
configure, new statistics in athstats, and new debug mask bits
While the architecture can support >2 slots in a TDMA BSS the current
design is intended (and tested) for only 2 slots.
Sponsored by: Intel
+ check a possible buffer overflow when creating a temp file,
submitted by Christoph Mallon
+ remove stale struct definitions
+ clarify the use of dflag and remove useless checks
MFC after: 3 days
typos and reference the kernel file which processes this info.
All in all, the content of this file should be moved to kldxref.c
or to the kld(4) manpage.
MFC after: 3 days
ARCHSTRING into the new MM_MAKE variable.
We only need to check for the presence of the target of $PAGER
if that variable is actually set. [1]
Pointed out by: Steve Kargl <sgk@troutmask.apl.washington.edu> [1]
====================
1. List the command line options in a more standard way
2. Improve the explanations of some of the arguments (-A, -D)
3. Add ARCHSTRING and MTREEDB to the example rc file
4. Re-sort some of the examples according to the existing distinction
of "has a command line version" vs. "does not have a command line version"
Document changes for r186678
===========================
1. /usr/src/etc -> /usr/src where needed [1]
2. Add IGNORE_FILES to the example rc [2] (and remove IGNORE_MOTD)
3. Update the EXIT STATUS section for [3] and [4]
Update Copyright and .Dd accordingly
PR: bin/96528 [1]
Submitted by: ru [1]
PR: bin/106642 [2]
Submitted by: Henrik Brix Andersen <henrik@brixandersen.dk>
PR: bin/122282 [3]
Submitted by: Eygene Ryabinkin <rea-fbsd@codelabs.ru> [3]
PR: bin/108183 [4]
Submitted by: Riccardo Torrini <riccardo@torrini.org> [4]
=======================
1. Various improvements to the mtree (-U) feature:
a. Seperate the notion of directory and file (user can override db path)
b. Only check for the existence of the mtree file if -U is set
c. Use mktemp to create the new version of the file
d. More safely install the new file
e. Standardize error messages a bit
2. Remove the last of the MAKEDEV stuff (RIP)
New Features
============
1. Switch to using the top level (e.g., /usr/src) Makefile, and specify
that we should use the *.mk files from the source directory instead of
the installed versions. [1][2] This allows easier cross builds and
simplifies (or in some cases permits) upgrading.
2. Check for the deprecated 'nodev' option in /etc/fstab [3]
3. Add support for the IGNORE_FILES variable [4] and deprecate IGNORE_MOTD
accordingly.
4. Before installing a file check to make sure that the target does not
already exist as a directory [5]
5. Check to be sure that the file installed and error out if not
PR: bin/96528 [1]
Submitted by: ru [1]
PR: bin/129639 [2]
Submitted by: sam [2]
PR: bin/122282 [3]
Submitted by: Eygene Ryabinkin <rea-fbsd@codelabs.ru> [3]
PR: bin/106642 [4]
Submitted by: Henrik Brix Andersen <henrik@brixandersen.dk> [4]
PR: bin/108183 [5]
Submitted by: Riccardo Torrini <riccardo@torrini.org> [5]
that differ only by VCS Id) for the following reasons:
1. It was added without my consent, review, or even a heads up
2. It is something that I've repeatedly said I do not want, and certainly
do not want as the default
3. It is poorly implemented (much too complex, produces false positives
e.g., /etc/mail/helpfile)
Given that this is a situation that comes up very infrequently (usually
only for a major version upgrade) and can usually be handled simply
enough on a one-off basis, I will once again point out that I think
this is a Bad Idea. I would be willing to consider a better implementation
as an option that is off by default.
is, consistently call it the boot manager, and switch the order the
options are presented so no boot manager is first in the list (and
hence more or less the default).
This area will probably be rototilled more before 8.0 comes out.
contrib/openbsm (svn merge) and src/sys/{bsm,security/audit} (manual
merge). Add libauditd build parts and add to auditd's linkage;
force libbsm to build before libauditd.
OpenBSM history for imported revisions below for reference.
MFC after: 1 month
Sponsored by: Apple Inc.
Obtained from: TrustedBSD Project
OpenBSM 1.1 alpha 4
- With the addition of BSM error number mapping, we also need to map the
local error number passed to audit_submit(3) to a BSM error number,
rather than have the caller perform that conversion.
- Reallocate user audit events to avoid collisions with Solaris; adopt a
more formal allocation scheme, and add some events allocated in Solaris
that will be of immediate use on other platforms.
- Add an event for Calife.
- Add au_strerror(3), which allows generating strings for BSM errors
directly, rather than requiring applications to map to the local error
space, which might not be able to entirely represent the BSM error
number space.
- Major auditd rewrite for launchd(8) support. Add libauditd library
that is shared between launchd and auditd.
- Add AUDIT_TRIGGER_INITIALIZE trigger (sent via 'audit -i') for
(re)starting auditing under launchd(8) on Mac OS X.
- Add 'current' symlink to active audit trail.
- Add crash recovery of previous audit trail file when detected on audit
startup that it has not been properly terminated.
- Add the event AUE_audit_recovery to indicated when an audit trail file
has been recovered from not being properly terminated. This event is
stored in the new audit trail file and includes the path of recovered
audit trail file.
- Mac OS X and FreeBSD dependent code in auditd.c is separated into
auditd_darwin.c and auditd_fbsd.c files.
- Add an event for the posix_spawn(2) and fsgetpath(2) Mac OS X system
calls.
- For Mac OS X, we use ASL(3) instead of syslog(3) for logging.
- Add support for NOTICE level logging.
OpenBSM 1.1 alpha 3
- Add two new functions, au_bsm_to_errno() and au_errno_to_bsm(), to map
between BSM error numbers (largely the Solaris definitions) and local
errno(2) values for 32-bit and 64-bit return tokens. This is required
as operating systems don't agree on some of the values of more recent
error numbers.
- Fix a bug how au_to_exec_args(3) and au_to_exec_env(3) calculates the
total size for the token. This buge.
- Deprecated Darwin constants, such as TRAILER_PAD_MAGIC, removed.
Now the NDISulator supports NDIS USB drivers that it've tested with
devices as follows:
- Anygate XM-142 (Conexant)
- Netgear WG111v2 (Realtek)
- U-Khan UW-2054u (Marvell)
- Shuttle XPC Accessory PN20 (Realtek)
- ipTIME G054U2 (Ralink)
- UNiCORN WL-54G (ZyDAS)
- ZyXEL G-200v2 (ZyDAS)
All of them succeeded to attach and worked though there are still some
problems that it's expected to be solved.
To use NDIS USB support, you should rebuild and install ndiscvt(8) and
if you encounter a problem to attach please set `hw.ndisusb.halt' to
0 then retry.
I expect no changes of the NDIS code for PCI, PCMCIA devices.
Obtained from: //depot/projects/ndisusb/...
1. The "route" command allows route insertion through the interface-direct
option "-iface". During if_attach(), an sockaddr_dl{} entry is created
for the interface and is part of the interface address list. This
sockaddr_dl{} entry describes the interface in detail. The "route"
command selects this entry as the "gateway" object when the "-iface"
option is present. The "arp" and "ndp" commands also interact with the
kernel through the routing socket when adding and removing static L2
entries. The static L2 information is also provided through the
"gateway" object with an AF_LINK family type, similar to what is
provided by the "route" command. In order to differentiate between
these two types of operations, a RTF_LLDATA flag is introduced. This
flag is set by the "arp" and "ndp" commands when issuing the add and
delete commands. This flag is also set in each L2 entry returned by the
kernel. The "arp" and "ndp" command follows a convention where a RTM_GET
is issued first followed by a RTM_ADD/DELETE. This RTM_GET request fills
in the fields for a "rtm" object, which is reinjected into the kernel by
a subsequent RTM_ADD/DELETE command. The entry returend from RTM_GET
is a prefix route, so the RTF_LLDATA flag must be specified when issuing
the RTM_ADD/DELETE messages.
2. Enforce the convention that NET_RT_FLAGS with a 0 w_arg is the
specification for retrieving L2 information. Also optimized the
code logic.
Reviewed by: julian
regenerated in libugidfw) rather than simply printing that the rule was
added with only the number. This makes ugidfw(8) behave a bit more like
ipfw(8), and also means that the administrator sees how the rule was
interpreted once uids/gids/etc were processed.
Obtained from: TrustedBSD Project
For example, ^C (SIGINT) may leave the drive spinning and locked.
This may also happen if you try to write a too-large image to a disc
and burncd(8) exits with an I/O error.
Add signal handling by doing a CDRIOCFLUSH ioctl to attempt to leave
burner in a sane state when burning is interrupted with SIGHUP, SIGINT,
SIGTERM, or in case an I/O error occurs during write.
Note, that blanking will still continue after interrupt but it seems to
finish correctly even after burncd(8) has quit.
Also, while I'm here bump WARNS to "6".
PR: 48730
Submitted by: Jaakko Heinonen <jh@saunalahti.fi>
