pointer types, and remove a huge number of casts from code using it.
Change struct xfile xf_data to xun_data (ABI is still compatible).
If we need to add a #define for f_data and xf_data we can, but I don't
think it will be necessary. There are no operational changes in this
commit.
padding is not specific to non-i386 architectures. It is
caused by non-i386 specific alignment requirements of
fs_swuid,
o Add a CTASSERT to catch a change in the size of struct fs
at compile-time rather than run-time.
Ok'd: gordon
Tested on: i386 ia64
will be used to support volume names with the help of a GEOM module (to be
committed). uuid will be used to deal with conflicting volume names (which
doesn't work just yet).
Approved by: mckusick@
repeatedly truncate the same file. Each time the file is truncated,
a buffer is grabbed to store the indirect block numbers that need
to be freed. Those blocks cannot be freed until the inode claiming
them is written to disk. Thus, the number of buffers being held by
soft updates explodes and in extreme cases can run the kernel out
of buffers. The problem can be avoided by doing an fsync on the
file every debug.maxindirdep truncates (currently defaulted to 50).
The fsync causes the inode to be written so that the held buffers
can be freed. The check for excessive buffers is checked as part
of the existing hook for excessive dependencies (softdep_slowdown)
in the truncate code.
Reported by: David Schultz <dschultz@uclink.Berkeley.EDU>
Sponsored by: DARPA & NAI Labs.
MFC after: 3 weeks
to sort out disk-io from file-io in the vm/buffer/filesystem space.
The intent is to sort VOP_STRATEGY calls into those which operate
on "real" vnodes and those which operate on VCHR vnodes. For
the latter kind, the call will be changed to VOP_SPECSTRATEGY,
possibly conditionally for those places where dual-use happens.
Add a default VOP_SPECSTRATEGY method which will call the normal
VOP_STRATEGY. First time it is called it will print debugging
information. This will only happen if a normal vnode is passed
to VOP_SPECSTRATEGY by mistake.
Add a real VOP_SPECSTRATEGY in specfs, which does what VOP_STRATEGY
does on a VCHR vnode today.
Add a new VOP_STRATEGY method in specfs to catch instances where
the conversion to VOP_SPECSTRATEGY has not yet happened. Handle
the request just like we always did, but first time called print
debugging information.
Apart up to two instances of console messages per boot, this amounts
to a glorified no-op commit.
If you get any of the messages on your console I would very much
like a copy of them mailed to phk@freebsd.org
kern/vfs_defaults.c it is wrong for the individual filesystems to use
the std* functions as that prevents override of the default.
Found by: src/tools/tools/vop_table
this was causing filedesc work to be very painful.
In order to make this work split out sigio definitions to thier own header
(sigio.h) which is included from proc.h for the time being.
Remove the malloctype from the ufs mount structure, instead add a callback
to the storage method for freeing inodes: UFS_IFREE().
Add vfs_ifree() method function which frees an inode.
Unvariablelize the malloc type used for allocating inodes.
so as to work correctly on 64-bit platforms.
Reported-by: Jake Burkholder <jake@locore.ca>
Sponsored by: DARPA & NAI Labs.
Approved by: Ian Dowse <iedowse@maths.tcd.ie>
that were copied in all of the earlier snapshots, thus its precomputed
list must be used in the copyonwrite test. Using incomplete lists may
lead to deadlock. Also do not include the blocks used for the indirect
pointers in the indirect pointers as this may lead to inconsistent
snapshots.
Sponsored by: DARPA & NAI Labs.
Approved by: re
previously allocated block as the previous use of the block may
have fallen out of the cache. Failure to reread its contents cause
zeroed results to be written instead of the proper contents.
Conversely, when the block is going to be entirely filled in, it
is not necessary reread the old contents.
Sponsored by: DARPA & NAI Labs.
Approved by: re
converting from individual vnode locks to the snapshot
lock, be sure to pass any waiting processes along to the
new lock as well. This transfer is done by a new function
in the lock manager, transferlockers(from_lock, to_lock);
Thanks to Lamont Granquist <lamont@scriptkiddie.org> for
his help in pounding on snapshots beyond all reason and
finding this deadlock.
Sponsored by: DARPA & NAI Labs.
1) Release the snapshot file lock while suspending the system. Otherwise
a process trying to read the lock may block on its containing directory
preventing the suspension from completing. Thanks to Sean Kelly
<smkelly@zombie.org> for finding this deadlock.
2) Replace some bdwrite's with bawrite's so as not to fill all the
buffers with dirty data. The buffers could not be cleaned as the
snapshot vnode was locked hence the system could deadlock when
making snapshots of really massive filesystems. Thanks to
Hidetoshi Shimokawa <simokawa@sat.t.u-tokyo.ac.jp> for figuring
this out.
Sponsored by: DARPA & NAI Labs.
before using it to write the superblock. This is to guard against
accidentally trashing the disklabel if the superblock format missed
being upgraded by the new kernel.
Reported by: Sam Leffler <sam@errno.com>
Sponsored by: DARPA & NAI Labs.
Approved by: Murray Stokely <murray@FreeBSD.org>
the old 8-bit fs_old_flags to the new location the first time that the
filesystem is mounted by a new kernel. One of the unused flags in
fs_old_flags is used to indicate that the flags have been moved.
Leave the fs_old_flags word intact so that it will work properly if
used on an old kernel.
Change the fs_sblockloc superblock location field to be in units
of bytes instead of in units of filesystem fragments. The old units
did not work properly when the fragment size exceeeded the superblock
size (8192). Update old fs_sblockloc values at the same time that
the flags are moved.
Suggested by: BOUWSMA Barry <freebsd-misuser@netscum.dyndns.dk>
Sponsored by: DARPA & NAI Labs.
in half because of reports that under heavy load the kernel could
exhaust its memory pool. The limit is now (desiredvnodes * 4)
rather than (desiredvnodes * 8), so it will still scale with
larger systems, just not as quickly.
Sponsored by: DARPA & NAI Labs.
not have hit the disk and the dependencies cannot be unrolled.
In this case, the system will mark the buffer as dirty again so
that the write can be retried in the future. When the write
succeeds or the system gives up on the buffer and marks it as
invalid (B_INVAL), the dependencies will be cleared.
Sponsored by: DARPA & NAI Labs.
"refreshing" the label on the vnode before use, just get the label
right from inception. For single-label file systems, set the label
in the generic VFS getnewvnode() code; for multi-label file systems,
leave the labeling up to the file system. With UFS1/2, this means
reading the extended attribute during vfs_vget() as the inode is
pulled off disk, rather than hitting the extended attributes
frequently during operations later, improving performance. This
also corrects sematics for shared vnode locks, which were not
previously present in the system. This chances the cache
coherrency properties WRT out-of-band access to label data, but in
an acceptable form. With UFS1, there is a small race condition
during automatic extended attribute start -- this is not present
with UFS2, and occurs because EAs aren't available at vnode
inception. We'll introduce a work around for this shortly.
Approved by: re
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
check for and/or report I/O errors. The result is that a VFS_SYNC
or VOP_FSYNC called with MNT_WAIT could loop infinitely on ufs in
the presence of a hard error writing a disk sector or in a filesystem
full condition. This patch ensures that I/O errors will always be
checked and returned. This patch also ensures that every call to
VFS_SYNC or VOP_FSYNC with MNT_WAIT set checks for and takes
appropriate action when an error is returned.
Sponsored by: DARPA & NAI Labs.
the ffs_copyonwrite routine to avoid a deadlock between the syncer
daemon trying to sync out a snapshot vnode and the bufdaemon
trying to write out a buffer containing the snapshot inode.
With any luck this will be the last snapshot race condition.
Sponsored by: DARPA & NAI Labs.
a full filesystem. Previously, if the allocation failed, we had to
fsync the file before rolling back any partial allocation of indirect
blocks. Most block allocation requests only need to allocate a single
data block and if that allocation fails, there is nothing to unroll.
So, before doing the fsync, we check to see if any rollback will
really be necessary. If none is necessary, then we simply return.
This update eliminates the flurry of disk activity that got triggered
whenever a filesystem would run out of space.
Sponsored by: DARPA & NAI Labs.
that works in the new threaded kernel. It was commented out of
the disksort routine earlier this year for the reasons given in
kern/subr_disklabel.c (which is where this code used to reside
before it moved to kern/subr_disk.c):
----------------------------
revision 1.65
date: 2002/04/22 06:53:20; author: phk; state: Exp; lines: +5 -0
Comment out Kirks io-request priority hack until we can do this in a
civilized way which doesn't cause grief.
The problem is that it is not generally safe to cast a "struct bio
*" to a "struct buf *". Things like ccd, vinum, ata-raid and GEOM
constructs bio's which are not entrails of a struct buf.
Also, curthread may or may not have anything to do with the I/O request
at hand.
The correct solution can either be to tag struct bio's with a
priority derived from the requesting threads nice and have disksort
act on this field, this wouldn't address the "silly-seek syndrome"
where two equal processes bang the diskheads from one edge to the
other of the disk repeatedly.
Alternatively, and probably better: a sleep should be introduced
either at the time the I/O is requested or at the time it is completed
where we can be sure to sleep in the right thread.
The sleep also needs to be in constant timeunits, 1/hz can be practicaly
any sub-second size, at high HZ the current code practically doesn't
do anything.
----------------------------
As suggested in this comment, it is no longer located in the disk sort
routine, but rather now resides in spec_strategy where the disk operations
are being queued by the thread that is associated with the process that
is really requesting the I/O. At that point, the disk queues are not
visible, so the I/O for positively niced processes is always slowed
down whether or not there is other activity on the disk.
On the issue of scaling HZ, I believe that the current scheme is
better than using a fixed quantum of time. As machines and I/O
subsystems get faster, the resolution on the clock also rises.
So, ten years from now we will be slowing things down for shorter
periods of time, but the proportional effect on the system will
be about the same as it is today. So, I view this as a feature
rather than a drawback. Hence this patch sticks with using HZ.
Sponsored by: DARPA & NAI Labs.
Reviewed by: Poul-Henning Kamp <phk@critter.freebsd.dk>
_POSIX_MAC_PRESENT based on available mount flags, if the services are
available.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
of a file in chunks that are less then the filesystem block size, if the
data is not already cached the system will perform a read-before-write.
The problem is that it does this on a block-by-block basis, breaking up the
I/Os and making clustering impossible for the writes. Programs such
as INN using cyclic file buffers suffer greatly. This problem is only going
to get worse as we use larger and larger filesystem block sizes.
The solution is to extend the sequential heuristic so UFS[2] can perform
a far larger read and readahead when dealing with this case.
(note: maximum disk write bandwidth is 27MB/sec thru filesystem)
(note: filesystem blocksize in test is 8K (1K frag))
dd if=/dev/zero of=test.dat bs=1k count=2m conv=notrunc
Before: (note half of these are reads)
tty da0 da1 acd0 cpu
tin tout KB/t tps MB/s KB/t tps MB/s KB/t tps MB/s us ni sy in id
0 76 14.21 598 8.30 0.00 0 0.00 0.00 0 0.00 0 0 7 1 92
0 76 14.09 813 11.19 0.00 0 0.00 0.00 0 0.00 0 0 9 5 86
0 76 14.28 821 11.45 0.00 0 0.00 0.00 0 0.00 0 0 8 1 91
After: (note half of these are reads)
tty da0 da1 acd0 cpu
tin tout KB/t tps MB/s KB/t tps MB/s KB/t tps MB/s us ni sy in id
0 76 63.62 434 26.99 0.00 0 0.00 0.00 0 0.00 0 0 18 1 80
0 76 63.58 424 26.30 0.00 0 0.00 0.00 0 0.00 0 0 17 2 82
0 76 63.82 438 27.32 0.00 0 0.00 0.00 0 0.00 1 0 19 2 79
Reviewed by: mckusick
Approved by: re
X-MFC after: immediately (was heavily tested in -stable for 4 months)
is required to use EAs with UFS2, and that UFS2 is recommend for EA use
for a variety of reasons.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
note that UFS2 doesn't require explicit extended attribute configuration,
and is recommends for this and other reasons if you plan to use ACLs.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
