sbin/fsck_msdosfs/fat.c:
- readfat:
* Only truncate out-of-range cluster pointers (1, or greater than
NumClusters but smaller than CLUST_RSRVD), as the current cluster
may contain some data. We can't fix reserved cluster pointers at
this pass, because we do no know the potential cluster preceding
it.
* Accept valid cluster for head bitmap. This is a no-op, and mainly
to improve code readability, because the 1 is already handled in
the previous else if block.
- truncate_at: absorbed into checkchain.
- checkchain: save the previous node we have traversed in case that we
have a chain that ends with a special (>= CLUST_RSRVD) cluster, or is
free. In these cases, we need to truncate at the cluster preceding the
current cluster, as the current cluster contains a marker instead of
a next pointer and can not be changed to CLUST_EOF (the else case can
happen if the user answered "no" at some point in readfat()).
- clearchain: correct the iterator for next cluster so that we don't
stop after clearing the first cluster.
- checklost: If checkchain() thinks the chain have no cluster, it
doesn't make sense to reconnect it, so don't bother asking.
Reviewed by: kevlo
MFC after: 24 days
X-MFC-With: r356313
Differential Revision: https://reviews.freebsd.org/D23065
In the code we used NumClusters as the upper (non-inclusive) boundary
of valid cluster number, so the actual value was 2 (CLUST_FIRST) more
than the real number of clusters. This causes a FAT16 media with
65524 clusters be treated as FAT32 and might affect FAT12 media with
4084 clusters as well.
To fix this, we increment NumClusters by CLUST_FIRST after the type
determination.
PR: 243179
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D23082
This is a re-apply r356249 with changes to make GCC happy.
This utility was initially written for FAT12/16, which were inherently
small. When FAT32 support was added, the old data structure and
algorithms remain used with minimal changes.
With growing size of FAT32 media, the current data structure that
requires 4 32-bit variables per each FAT32 table entry would consume up
to 4 GiB of RAM, which can be too big for systems with limited RAM
available.
Address this by taking a different approach of validating the FAT.
The FAT is essentially a set of linked lists of chains that was
referenced by directory entries, and the checker needs to make sure that
the linked chains of clusters do not have cross-linked chains, and every
chain were referenced by one and only one directory entry. Instead of
keeping track of the chain's 'head' cluster number, the size of the
chain, the used status of the chain and the "next" pointer which is
content of the FAT table, we create accessors for the FAT table data
for the "next" pointer, and keep only one bit to indicate if the
current cluster is a 'head' node of a cluster chain, in a bitmap.
We further overhaul the FAT checker to find out the possible head nodes
by excluding ones that are not (in other words, nodes that have some
other nodes claiming them as the next node) instead of marking the head
nodes for each node on the chain. This approach greatly reduced the
complexiety of computation from O(N^2) worst case, to an O(N) scan for
worst case. The file (cluster chain) length is not useful for the FAT
checker, so don't bother to calculate them in the FAT checker and
instead leave the task to the directory structure check, at which point
we would have non-crossed cluster chains, and we are guaranteed that
each cluster will be visited for at most one time.
When checking the directory structures, we use the head node indicator
to as the visited (used) flag: every cluster chain can only be
referenced by one directory entry, so we clear them when calculating
the length of the chain, and we can immediately tell if there are
anomalies in the directory entry.
As a result, the required RAM size is now 1 bit per each entry of
the FAT table, plus memory needed to hold the FAT table in memory,
instead of 16 bytes (=128 bits) per each entry. For FAT12 and FAT16,
we will load the whole FAT table into memory as they are smaller than
128KiB, and for FAT32, we first attempt to mmap() it into memory, and
when that fails, we would fall back to a simple LRU cache of 4 MiB of
RAM.
sbin/fsck_msdosfs/boot.c:
- Added additional sanity checks for valid FAT32/FAT16/FAT12 cluster
number.
- FAT32: check if root directory starts with a valid cluster number,
moved from dir.c. There is no point to proceed if the filesystem
is already damaged beyond repair.
sbin/fsck_msdosfs/check.c:
- Combine phase 1 and phase 2, now that the readfat() is able to
detect cross chains.
sbin/fsck_msdosfs/dir.c:
- Refactor code to use FAT accessor instead of accessing the internal
representation of FAT table.
- Make use of the cluster chain head bitmap.
- Clarify and simplify directory entry check, remove unnecessary
checks that are would be done at a later time (for example, whether
the directory's second cluster is a valid one, which is examined
more throughly in a later checkchain() and does not prevent us
from proceeding further).
sbin/fsck_msdosfs/dosfs.h:
- Remove internal representation of FAT table, which is replaced by
the head bitmap that is opaque to other code.
- Added a special CLUST_DEAD cluster type to indicate errors.
sbin/fsck_msdosfs/ext.h:
- Added a flag that overrides mmap(2) setting. The corresponding
command line option, -M is intentionally undocumented as we do not
expect users to need it.
- Added accessors for FAT table and convert existing interface to use
it.
sbin/fsck_msdosfs/fat.c:
- Added head bitmap to represent whether a cluster is a head cluster.
- Converted FAT internal representation to accessors.
- Implemented a LRU cache for FAT32 when mmap(2) should not or can not
be used.
- _readfat: Attempt a mmap(2) and fall back to regular read for
non-FAT32 file systems; use the LRU cache for FAT32 and prepopulate
the cache with the first 4MiB of the entries.
- readfat: Added support of head bitmap and use the population scan to
detect bogus chains.
- clusterdiff: removed, FATs are copied from the checked copy via
writefat()/copyfat().
- checkchain: calculates the length of a cluster chain and make sure
that it ends with a valid EOF marker.
- clearchain: follow and clear a chain and maintain the free cluster
count.
- checklost: convert to use head bitmap. At the end of all other scans,
the remaining 'head' nodes are leaders of lost cluster chains.
sbin/fsck_msdosfs/fat.c:
- Added a new -M option which is intentionally undocumented, to disable
the use of mmap().
Reviewed by: kevlo
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D22965
This utility was initially written for FAT12/16, which were inherently
small. When FAT32 support was added, the old data structure and
algorithms remain used with minimal changes.
With growing size of FAT32 media, the current data structure that
requires 4 32-bit variables per each FAT32 table entry would consume up
to 4 GiB of RAM, which can be too big for systems with limited RAM
available.
Address this by taking a different approach of validating the FAT.
The FAT is essentially a set of linked lists of chains that was
referenced by directory entries, and the checker needs to make sure that
the linked chains of clusters do not have cross-linked chains, and every
chain were referenced by one and only one directory entry. Instead of
keeping track of the chain's 'head' cluster number, the size of the
chain, the used status of the chain and the "next" pointer which is
content of the FAT table, we create accessors for the FAT table data
for the "next" pointer, and keep only one bit to indicate if the
current cluster is a 'head' node of a cluster chain, in a bitmap.
We further overhaul the FAT checker to find out the possible head nodes
by excluding ones that are not (in other words, nodes that have some
other nodes claiming them as the next node) instead of marking the head
nodes for each node on the chain. This approach greatly reduced the
complexiety of computation from O(N^2) worst case, to an O(N) scan for
worst case. The file (cluster chain) length is not useful for the FAT
checker, so don't bother to calculate them in the FAT checker and
instead leave the task to the directory structure check, at which point
we would have non-crossed cluster chains, and we are guaranteed that
each cluster will be visited for at most one time.
When checking the directory structures, we use the head node indicator
to as the visited (used) flag: every cluster chain can only be
referenced by one directory entry, so we clear them when calculating
the length of the chain, and we can immediately tell if there are
anomalies in the directory entry.
As a result, the required RAM size is now 1 bit per each entry of
the FAT table, plus memory needed to hold the FAT table in memory,
instead of 16 bytes (=128 bits) per each entry. For FAT12 and FAT16,
we will load the whole FAT table into memory as they are smaller than
128KiB, and for FAT32, we first attempt to mmap() it into memory, and
when that fails, we would fall back to a simple LRU cache of 4 MiB of
RAM.
sbin/fsck_msdosfs/boot.c:
- Added additional sanity checks for valid FAT32/FAT16/FAT12 cluster
number.
- FAT32: check if root directory starts with a valid cluster number,
moved from dir.c. There is no point to proceed if the filesystem
is already damaged beyond repair.
sbin/fsck_msdosfs/check.c:
- Combine phase 1 and phase 2, now that the readfat() is able to
detect cross chains.
sbin/fsck_msdosfs/dir.c:
- Refactor code to use FAT accessor instead of accessing the internal
representation of FAT table.
- Make use of the cluster chain head bitmap.
- Clarify and simplify directory entry check, remove unnecessary
checks that are would be done at a later time (for example, whether
the directory's second cluster is a valid one, which is examined
more throughly in a later checkchain() and does not prevent us
from proceeding further).
sbin/fsck_msdosfs/dosfs.h:
- Remove internal representation of FAT table, which is replaced by
the head bitmap that is opaque to other code.
- Added a special CLUST_DEAD cluster type to indicate errors.
sbin/fsck_msdosfs/ext.h:
- Added a flag that overrides mmap(2) setting. The corresponding
command line option, -M is intentionally undocumented as we do not
expect users to need it.
- Added accessors for FAT table and convert existing interface to use
it.
sbin/fsck_msdosfs/fat.c:
- Added head bitmap to represent whether a cluster is a head cluster.
- Converted FAT internal representation to accessors.
- Implemented a LRU cache for FAT32 when mmap(2) should not or can not
be used.
- _readfat: Attempt a mmap(2) and fall back to regular read for
non-FAT32 file systems; use the LRU cache for FAT32 and prepopulate
the cache with the first 4MiB of the entries.
- readfat: Added support of head bitmap and use the population scan to
detect bogus chains.
- clusterdiff: removed, FATs are copied from the checked copy via
writefat()/copyfat().
- checkchain: calculates the length of a cluster chain and make sure
that it ends with a valid EOF marker.
- clearchain: follow and clear a chain and maintain the free cluster
count.
- checklost: convert to use head bitmap. At the end of all other scans,
the remaining 'head' nodes are leaders of lost cluster chains.
sbin/fsck_msdosfs/fat.c:
- Added a new -M option which is intentionally undocumented, to disable
the use of mmap().
Reviewed by: kevlo
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D22965
The following checks are now being enforced:
- bpbBytesPerSec: only accept 512, 1024, 2048 and 4096.
- bpbSecPerClust: only accept 1, 2, 4, 8, 16, 32, 64 and 128.
- bpbResSectors: require non-zero.
- bpbFATs: require non-zero.
- bpbSectors: require zero for FAT32.
- bpbFATsmall: require zero for FAT32.
- bpbHugeSectors: require non-zero for FAT32.
Bail out if the BPB contained values that do not meet these requirements.
We also require FATsecs * FATsecs to not overflow 32-bit unsigned
integer.
Check for backup boot block was removed because the checker does not take
corrective action, and msdosfs driver ignores it too.
We do not have code to fix this situation, and the mismatch does not
prevent the kernel driver from consuming the file system, and some factory
formatted SD cards seem to have a garbage backup block.
This makes the code match to its comments (replacing pfatal with pwarn).
Inspired by: NetBSD r1.13
Inspired by: b47b16353f
MFC after: 2 weeks
This can happen when the fsinfo signature is invalid, and the
user have choose to fix it, in which case the code would return
FSBOOTMOD (not FSOK but not FSFATAL either).
All other (fatal) cases would return FSFATAL.
Obtained from: Android Open Source Project
Obtained from: d8775a29ea
MFC after: 2 weeks
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
- convert boot1.efi to corrrectly calculate the lba for what the
media reports and convert the size based on what FreeBSD uses.
The existing code would use the 512 byte lba and convert the
size using 4K byte size.
- make fsck_msdosfs read the boot block as 4K so the read doesn't
fail on a 4Kn drive since FreeBSD will error out parition reads
of a block. Make the bpbBytesPerSec check a multiple of 512 since
it can be 512 or 4K depending on the disk. This allows fsck to
pass checking the EFI partition on a 4Kn disk.
To create the EFI file system I used:
newfs_msdos -F 32 -S 4096 -c 1 -m 0xf8 <partition>
This works for booting 512 and 4Kn disks.
Caveat is that loader.efi cannot read the 4Kn EFI partition. This isn't
critical right now since boot1.efi will read loader.efi from the ufs
partition. It looks like loader.efi can be fixed via making some of the
512 bytes reads more flexible. loader.efi doesn't have trouble reading
the ufs partition. This is probably a simple fix.
I now have FreeBSD installed on a system with 4Kn drives and tested the
same code works on 512.
MFC after: 1 week
