Improve compatibility with BSD/OS, and also more accurately reflect that
IP aliases aren't really any different than the primary IP address on an
interface.
Reviewed by: dcs
Approved by: jkh
-Open socket() at first and then setuid() to actual user.
-Allow ping6 preload option only for root.
Approved by: jkh
Submitted by: Neil Blakey-Milner <nbm@mithrandr.moria.org>
Kirk argees that the comment about corruption caused by switching the flags
on an already mounted manpage are bogus, it doesn't happen.
Ok by: mckusick
256 bytes) caused it to break on many devices.
The SCSI spec says that for commands with 8-bit length fields, a value of 0
means 256 bytes. As it turns out, many devices don't deal with that
properly. Some interpret the 0 as 0, and return no data. Others return
more than 256 bytes of data, and cause an overrun.
The fix is to tell the device we've only allocated SHORT_INQUIRY_LENGTH (36
bytes) of inquiry data, instead of sizeof(struct scsi_inquiry_data).
camcontrol.c: Change inq_len in the call to scsi_inquiry() to
SHORT_INQUIRY_LENGTH, and add a long comment
explaining the reason for the change.
scsi_all.h: Add a comment above the definitinon of
SHORT_INQUIRY_LENGTH alerting people that it is
both the initial probe inquiry length, and the
minimum amount of data needed for scsi_print_inquiry()
to function.
scsi_all.c: Add a comment about SHORT_INQUIRY_LENGTH being the
minimum amount of data needed for
scsi_print_inquiry() to function.
Reviewed by: gibbs
Approved by: jkh
Reported by: "John W. DeBoskey" <jwd@unx.sas.com>
Sorry for the flapping, but no change will be done for 4.0 anymore.
Official standard will be published around April or later.
If different format would be adopted at that time, then support for
the new format will be added to the succeeding FreeBSD 4.x.
Approved by: jkh
include a copy of the 3.0.1 firmware for the PCA200E card in the fore_dnld
program.
There are various and subtle compatibility issues between the hfa driver and
the microcode, this version is belived to work best.
If a file is specified on the command line it will be used instead of the
embedded image.
Approved by: jkh
IPv6 scoped addr display is not yet supported by ifconfig
and route. Now almost of IPv6 apps support it, so its support
in ifconfig and route is important to keep consisetncy, and
to avoid user confusion.
Approved by: jkh
Yes it is almost code freeze, but as the result of many thought, now I
think this should be added before 4.0...
make world check, kernel build check is done.
Reviewed by: green
Obtained from: KAME project
add an upper limit to -t
match the types of return values and the variables they are stuffed in
make the man page and usage() a little more consistantly ugly
less obfuscation.
Submitted by: adrian, billf
Changes are:
- rpc.umntall is called at the right places now in /etc/rc*
- rpc.umntall timeout has been lowered from two days (too high) to one
- verbose messages in rpc.umntall have been clarified
- kill double entries in /var/db/mounttab when rpc.umntall is invoked
- ${early_nfs_mounts} has been removed from /etc/rc
- patched mount(8) -p to print different pass/dump values for ufs filesystems.
(last patch recieved from dan <bugg@bugg.strangled.net>)
Submitted by: Martin Blapp <mbr@imp.ch>, dan <bugg@bugg.strangled.net>
Also, in addition to the previous log message, the last change had a fix
for the case where where f.mntfromname is a relative path like da0a.
Submitted by: bde
