Seigo Tanimura
ca6da1de5e
Add the logical ID of Avance Logic ALS100. The vendor ID is also
...
checked, which was introduced in 1.18.
PR: kern/16487
Submitted by: Oliver Fromme <oliver.fromme@heim3.tu-clausthal.de>
Approved by: jkh
2000-03-09 02:13:21 +00:00
Cameron Grant
1a7d73a130
Partial fix: the following patch correctly configures the card for dual
...
channel DMA. The problem was that the SDC bit (0x04) can only be set in
the MCE state.
PR: kern/16587
Submitted by: Matthew Reimer <mreimer@vpop.net>
Approved by: jkh (in person)
2000-03-05 15:51:09 +00:00
Cameron Grant
73bd6f4aab
fix ess end-of-buffer repeating
...
Submitted by: nhibma
Approved by: jkh
2000-02-14 23:37:02 +00:00
Peter Wemm
5775b1a2b6
Tidy up stray or bogus #if NFOO > 0 and #include "foo.h".
2000-01-29 18:48:30 +00:00
Peter Wemm
96e00123b4
Remove a rather bizzare set of #ifdefs and #defines that all worked out
...
to be a NO-OP.
2000-01-29 18:44:01 +00:00
Cameron Grant
a05382d9ae
differentiate cmi8330 and als100 pnp cards based on their vendor id. this
...
is a kludge for 4.0
2000-01-29 00:18:29 +00:00
Andrew Gallatin
de6d75328e
Add support for detection of the ESS 1688 found on my Dell Latitude LM
2000-01-28 04:28:11 +00:00
Cameron Grant
45248baa3c
handle simplex devices right
2000-01-26 20:27:45 +00:00
Peter Wemm
a3a2b1e1b2
Note the PnP id's for the NMX2210 next to the id's where they are used.
...
The pnpbios doesn't supply a description in the case we've seen so
supply one.
2000-01-23 13:17:03 +00:00
Seigo Tanimura
8f7076b8ff
The pointer of the serial FIFO in the DSP seems to make an error
...
upon starting/stopping the DSP. Correct the pointer in addition
to clearing the FIFO.
2000-01-23 07:04:02 +00:00
Cameron Grant
f2410ff244
kludge to fix the end-of-sample repeating bug. i don't know why it happens;
...
none of my hw does it, but this should fix it for now.
Tested by: wpaul
2000-01-18 18:59:03 +00:00
Cameron Grant
03a00905d3
update ac97 layer to use device_printf when printing messages
2000-01-18 17:13:43 +00:00
Peter Wemm
615407b5a0
Some SB128's (ES1371) have a different PCI vendor id. Vendor == 0x3274
...
instead of the normal 0x1274.
Tested by: des
2000-01-17 07:54:00 +00:00
Cameron Grant
9bc502089a
fix missing \n in sndstat output
2000-01-16 12:52:22 +00:00
Cameron Grant
0a12fe07e7
oops, best play format was set to unsigned 16 bit instead of signed 16 bit
...
stereo. remenant from testing.
2000-01-16 12:05:07 +00:00
Cameron Grant
724efc44ec
attach to non-ac97 neomagic chips and hope that ac97 ones do not have the
...
same pnpbios id
2000-01-13 06:11:32 +00:00
Cameron Grant
5b4c3f3ca0
be less verbose
2000-01-13 06:00:57 +00:00
Daniel Eischen
d404cb51ee
Add support for detection of the ESS 1878 chip.
2000-01-12 11:16:23 +00:00
Cameron Grant
e7fb32964c
exclude chips with subdevices specified on a list of non-ac97 chips
2000-01-11 10:37:16 +00:00
Cameron Grant
898cb2af53
make dsp_read() assert that it has a read channel, not a write channel
...
Submitted by: green
2000-01-10 07:05:15 +00:00
Cameron Grant
10b23f4c02
don't complain about bad intrs unless we get 1000 of them consecutively
...
whilst we are playing or recording. since we should irq ~20 times/sec when
active, this should never trigger. in theory. if it never does trigger,
the check will be removed.
2000-01-10 06:19:20 +00:00
Cameron Grant
9090c22ce7
general tidyup
2000-01-10 03:22:28 +00:00
Cameron Grant
4ee074718b
return the sample rate set instead of 0. oops. mpg123 should now work.
2000-01-10 01:59:12 +00:00
Cameron Grant
147d35e8b3
fix the premature termination of playback
2000-01-09 08:32:49 +00:00
Cameron Grant
d5fa8408e6
driver for neomagic 256av and 256zx
...
Obtained from: anonymous author, heavily derived
2000-01-09 08:14:11 +00:00
Cameron Grant
bf8ca271a3
modify sndstat output
2000-01-09 08:07:46 +00:00
Cameron Grant
833f702348
allow mixer-only devices - ie, devices with no play/rec channels
2000-01-06 04:11:36 +00:00
Cameron Grant
bbb5bf3d69
don't panic if channel init fails, report and fail gracefully
2000-01-05 20:44:41 +00:00
Cameron Grant
2abc85f0c0
argh, forgot the bus_dma_tag_creates.
...
also, panic if channel init fails instead of derefing null.
2000-01-05 04:01:34 +00:00
Cameron Grant
ebb0b1f9bb
set up the pci regs properly for busmastering. this makes the card work on
...
my smp box.
2000-01-05 02:03:55 +00:00
Cameron Grant
9d1671b8c2
allocate isa bounce buffers of the right size for ess/mss cards, fixes
...
panics reported
2000-01-05 00:39:20 +00:00
Seigo Tanimura
769309aaf2
Do not start/stop DMA transfer if it is already started/stopped.
2000-01-03 05:26:12 +00:00
Seigo Tanimura
f259d7eed5
- Handle an interrupt for csa primarily in the bridge driver,
...
then invoke the children. As the value of HISR can be read
only once, pass the HISR to the children via struct
csa_bridgeinfo, stored in the ivars of them.
- Clear the contents of serial FIFO upon stopping the DMA for
playing. This may eliminate buzz on playing. Experimental.
2000-01-03 02:51:16 +00:00
Cameron Grant
43607766d6
revert buffer size to 64k
2000-01-01 21:50:20 +00:00
Seigo Tanimura
f7e00c54d1
Correct the delay durations as in the sample sources provided by Crystal Semiconductor.
2000-01-01 09:07:03 +00:00
Peter Wemm
32ef0d3eb6
Attach the CS4610 PCI / CS4239 setup in isa compatability mode as CSC0100.
...
The PCI component is non-AC97 apparently.
PR: 15632
Submitted by: gibbs
1999-12-30 20:04:11 +00:00
Cameron Grant
69cbc772d9
make ess cards use a 64k buffer again, by implementing esschan_init()
1999-12-30 04:04:43 +00:00
Cameron Grant
2635fee807
make es1373 chips with ac97 2.1 work on troublesome motherboards
...
Submitted by: Russell Cattelan <cattelan@thebarn.com>
1999-12-29 05:44:17 +00:00
Peter Wemm
664a31e496
Change #ifdef KERNEL to #ifdef _KERNEL in the public headers. "KERNEL"
...
is an application space macro and the applications are supposed to be free
to use it as they please (but cannot). This is consistant with the other
BSD's who made this change quite some time ago. More commits to come.
1999-12-29 04:46:21 +00:00
Cameron Grant
a0b57fb738
- latest 2ndbuffer patch
...
- make chn_setdir work for rec on isa cards
- note: es1371 does not irq in smp
Submitted by: tanimura
1999-12-29 03:46:54 +00:00
Peter Wemm
7c361b70c5
Fix a mistake in the PNP EISA-encoding of the Avance ALS120 id.
...
Submitted by: Bryan Liesner <bleez@netaxs.com>
1999-12-26 10:51:47 +00:00
Doug Rabson
7e864cbf08
Don't pass u_int32_t pointers to BUS_READ_IVAR since it tends to make
...
alphas panic.
1999-12-24 16:22:45 +00:00
Peter Wemm
2996751a32
Collapse a bunch of unused MD_CS42nn tags into a single one. This saves
...
going to a lot of trouble to identify it and set the tag and then not use
it. Convert the pnp id matching to the preferred table based system.
@@@0001 (CMI8330 ldn 0) is a mss, not a SB.
1999-12-21 14:09:19 +00:00
Peter Wemm
93111ff410
Tidy up a few loose ends, including adding the pnp tags in comments.
...
Remove @@@0001 - it's an MSS, not a SB, at least according to the
original pre-sbc code and according to a pnpinfo report that Cameron has.
1999-12-21 14:04:14 +00:00
Peter Wemm
e9feccdcb4
Remove #if NISA > 0 - this is best done by the configuration process.
...
It had a heap of unreferenced stuff if there was no isa configured in the
system.
1999-12-21 13:55:46 +00:00
Cameron Grant
9035ec00a0
minor cleanup
...
Parts Submitted by: Ville-Pertti Keinonen <will@ztango.com>
1999-12-21 08:43:28 +00:00
Cameron Grant
637e117737
don't use the sbpro mic vol register during init on ess cards; it causes
...
feedback and we use the native one elsewhere.
1999-12-21 06:18:03 +00:00
Cameron Grant
a451ce1dad
minor cosmetics
1999-12-20 14:57:46 +00:00
Cameron Grant
71f78e06c6
make marcel's onboard ess1888 work
...
Submitted by: marcel
1999-12-20 14:55:56 +00:00
Cameron Grant
1ad869dbc6
allow (broken) apps to use mixer ioctls on dsp devices. eg: vmware
...
Submitted by: "Vladimir N. Silyaev" <vsilyaev@mindspring.com>
1999-12-20 00:56:51 +00:00