When refill_fl() fails to allocate large (9/16KB) mbuf cluster, it
falls back to safe (4KB) ones. But it still saved into sd->zidx
the original fl->zidx instead of fl->safe_zidx. It caused problems
with the later use of that cluster, including memory and/or data
corruption.
While there, make refill_fl() to use the safe zone for all following
clusters for the call, since it is unlikely that large succeed.
MFC after: 3 days
Sponsored by: iXsystems, Inc.
Reviewed by: np, jhb
Differential Revision: https://reviews.freebsd.org/D28716
FreeBSD when running as a dom0 under Xen is not supposed to access the
run time services directly, and instead should proxy the calls through
Xen using an hypercall interface that exposes access to selected run
time services.
Implement the efirt interface on top of the Xen provided hypercalls.
Sponsored by: Citrix Systems R&D
Reviewed by: kib
Differential revision: https://reviews.freebsd.org/D28621
Introduce a set of hooks for MI EFI public functions, so that a new
implementation can be done. This will be used to implement the Xen PV
EFI interface that's used when running FreeBSD as a Xen dom0 from UEFI
firmware. Also make the efi_status_to_errno non-static since it will
be used to evaluate status return values from the PV interface.
No functional change indented.
Sponsored by: Citrix Systems R&D
Reviewed by: kib, imp
Differential revision: https://reviews.freebsd.org/D28620
Locking the second lock which causes the LOR, can be skipped because
the code updating the shared variables is always executing from the
same USB thread.
lock order reversal:
1st 0xfffff80005cc3840 pcm7:play:dsp7.p0 (pcm play channel, sleep mutex)
@ usb_transfer.c:2342
2nd 0xfffff80005cc3860 pcm7:record:dsp7.r0 (pcm record channel, sleep mutex)
@ uaudio.c:2317
lock order pcm record channel -> pcm play channel established at:
witness_checkorder+0x461
__mtx_lock_flags+0x98
dsp_mmap_single+0x151
vm_mmap_cdev+0x65
devfs_mmap_f+0x143
kern_mmap_req+0x594
sys_mmap+0x46
amd64_syscall+0x12e
fast_syscall_common+0xf8
lock order pcm play channel -> pcm record channel attempted at:
witness_checkorder+0xd82
__mtx_lock_flags+0x98
uaudio_chan_play_callback+0xeb
usbd_callback_wrapper+0x7ec
usb_command_wrapper+0x7e
usb_callback_proc+0x8e
usb_process+0xf3
fork_exit+0x80
fork_trampoline+0xe
Found by: Stefan Ehmann <shoesoft@gmx.net>
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
defined by hardware rather than cached one to match HIDIOCGRDESC ioctl.
This fixes errors reported by hid-tools being run against /dev/hidraw#
device node belonging to driver which overloads report descriptor.
MFC after: 1 week
Ignore fantom keyboard state reports entirelly rather than ignore
RollOver states for each key separatelly. Latter results in spurious
release/push pairs of events on each fantom keyboard state report.
Reported by: Jan Martin Mikkelsen <janm_AT_transactionware_DOT_com>
Submitted by: Jan Martin Mikkelsen (initial version)
PR: 253249
MFC after: 1 week
Ignore fantom keyboard state reports entirelly rather than ignore
RollOver states for each key separatelly. Latter results in spurious
release/push pairs of events on each fantom keyboard state report.
Reported by: Jan Martin Mikkelsen <janm_AT_transactionware_DOT_com>
Submitted by: Jan Martin Mikkelsen (initial version)
PR: 253249
MFC after: 1 week
Previously, iscsi_poll() just panicked. This meant if you got a panic
on a box when using the iSCSI initiator, the attempt to shutdown would
trigger a nested panic and never write out a core. Now, CCB's sent to
iSCSI devices (such as the sychronize-cache request in dashutdown())
just fail with a timeout during a panic shutdown.
Reviewed by: scottl, mav
MFC after: 2 weeks
Sponsored by: Chelsio
Differential Revision: https://reviews.freebsd.org/D28455
Since commit 8fa6abb6f4f64f ("Expose clang's alignment builtins and use
them for roundup2/rounddown2"), clang emits warnings for several
alignment operations in these drivers because the operation is a no-op.
The compiler is arguably being too strict here, but in the meantime
let's silence the warnings by conditionally compiling the alignment
operations.
Reviewed by: arichardson, hselasky
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D28576
My YOGA requires a minimum of 7 to parse w/o an error. Since the memory savings
are trivial and the yoga a popular system, bump the default up to 8. There's no
API/ABI issues in doing this. This hid_item struct isn't exported to userland
and the one libusbhid has is different and only shares a name...
MFC After: 3 days
Reviewed by: wulf@
Differential Revision: https://reviews.freebsd.org/D28543
It appears that production versions of EPYC firmware get the _STA method right
for these nodes. In fact, this workaround breaks on production hardware by
including too many uart nodes. This work around was for pre-release hardware
that wound up not having a large deployment. Move this work around to a kernel
option since the machines that needed it have been powered off and are difficult
to resurrect. Should there be a more significant deployment than is understood,
we can restrict it based on smbios strings.
Discussed with: mmacy@, seanc@, jhb@
MFC After: 3 days
This adds a new sysctl to Wellspring Touchpad driver for controlling
Z-Axis (2-finger vertical scroll) direction "hw.usb.wsp.z_invert".
Submitted by: James Wright <james.wright_AT_digital-chaos_DOT_com>
Reviewed by: wulf
PR: 253321
Differential revision: https://reviews.freebsd.org/D28521
vt is using static buffers for on screen data, the buffer size is
calculated based on maximum supported screen size and 8x16 font.
When using hi-res graphics and very smaller than 8x16 font, we
need to be careful not to overflow static buffers in vt.
Testing: I did test by building smaller buffers than vt currently is using,
royger was testing on actual 4k capable hardware.
MFC after: 1 week
Tested by: royger
X700 family of controllers has limited number of available VLAN
HW filters. Driver did not handle properly a case when user
assigned more VLANs to the interface which had all filters
already in use. Fix that by disabling HW filtering when
it is impossible to create filters for all requested VLANs.
Keep track of registered VLANs using bitstring to be able
to re-enable HW filtering when number of requested VLANs
drops below the limit.
Also switch all allocations to use M_IXL malloc type
to ease detecting memory leaks in the driver.
Reviewed by: erj
Tested by: gowtham.kumar.ks@intel.com
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28137
Add endiannes conversions in order to support big-endian platforms
Submitted by: Andre Fernando da Silva <andre.silva@eldorado.org.br>
Reviewed by: luporl, alfredo, kadesai (on email)
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D26531
- limit maximum segment size to 2048 bytes. Although dwmmc supports a buffer
fragment with a maximum length of 4095 bytes, use the nearest lower power
of two as the maximum fragment size. Otherwise, busdma create excessive
buffer fragments.
- fix off by one error in computation of the maximum data transfer length.
- in addition, reserve two DMA descriptors that can be used by busdma
bouncing. The beginning or end of the buffer can be misaligned.
- Don’t ignore errors passed to bus_dmamap_load() callback function.
- In theory, a DMA engine may be running at time when next dma descriptor is
constructed. Create a full DMA descriptor before OWN bit is set.
MFC after: 2 weeks
This fixes an issue where a private key contained bits that should
have been cleared by the clamping process, but were passed through
to the scalar multiplication routine and resulted in an invalid
public key.
Issue diagnosed (and an initial fix proposed) by shamaz.mazum in
PR 252894.
This fix suggested by Jason Donenfeld.
PR: 252894
Reported by: shamaz.mazum
Reviewed by: dch
MFC after: 3 days
DataSN for solicited Data-Out is per-R2T. Since we handle whole R2T
in one go, we don't need to store it anywhere, especially in global
per-command structure. This may allow us to handle multiple R2T per
command at once, if we decide, or may be relax locking.
Rename the second use of that field to io_referenced_task_tag.
MFC after: 1 month
As we get started with no memory allocator, we set up static font data
for font passed by loader (if there is any). At this time, we also must
set refcount 1, and refcount will get incremented in cnprobe() callback.
At some point the memory allocator will be available, and we will set up
properly allocated font data, but we should not disturb the refcount.
PR: 253147
Memory and PCI resources are freed with no particular order. This could
cause use-after-frees when detaching following a failed attach. For
instance, iflib_tx_structures_free() frees ctx->ifc_txqs[] but
iflib_tqg_detach() attempts to access this array. Similarly, adapter
queues gets freed by IFDI_QUEUES_FREE() but IFDI_DETACH() attempts to
access adapter queues to free PCI resources.
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D27634
- The behavior implemented in r362905 resulted in delayed transmission
of packets in some cases, causing performance issues. Use a different
heuristic to predict tx requests.
- Add a tunable/sysctl (hw.cxgbe.tx_coalesce) to disable tx coalescing
entirely. It can be changed at any time. There is no change in
default behavior.
Investigation of iSCSI target data corruption reports brought me to
discovery that cxgb(4) expects mbufs to be physically contiguous, that
is not true after I've started using m_extaddref() in software iSCSI
for large zero-copy transmissions. In case of fragmented memory the
driver transmitted garbage from pages following the first one due to
simple use of pmap_kextract() for the first pointer instead of proper
bus_dmamap_load_mbuf_sg(). Seems like it was done as some optimization
many years ago, and at very least it is wrong in a world of IOMMUs.
This patch just removes that optimization, plus limits packet coalescing
for mbufs crossing page boundary, also depending on assumption of one
segment per packet.
MFC after: 3 days
Sponsored by: iXsystems, Inc.
Reviewed by: mmacy, np
Differential revision: https://reviews.freebsd.org/D28428
Originally IFCAP_NOMAP meant that the mbuf has external storage pointer
that points to unmapped address. Then, this was extended to array of
such pointers. Then, such mbufs were augmented with header/trailer.
Basically, extended mbufs are extended, and set of features is subject
to change. The new name should be generic enough to avoid further
renaming.
newer controller have a sparce bus space that can be figured
out by probing the HW. This gives the starting bus number.
When reading the PCI config. space behind the VMD controller,
the offset of the starting bus needs to be subtracted from
the bus being read.
Fixed a bug in which in which not all of the devices
directly attached to the VMD controller would be probed.
On my initial test HW, a switch was found at bus 0, slot 0
and function 0. All of the NVME drives were behind that
switch. Now scan for all slots and functions attached to
bus 0. If a something was found then run attach after the
scan. On detach also go through all slots and functions
on bus 0.
Tested with device ID's: 0x201d & 0x9a0b
Tested by: nc@
MFC after: 7 days
PR: 252253
Move software iSCSI tunables/sysctls into kern.icl.soft subtree.
Replace several hardcoded length constants there with variables.
While there, stretch the limits to better match Linux' open-iscsi
and our own initiator with new MAXPHYS of 1MB. Our CTL target is
also optimized for up to 1MB I/Os, so there is also a match now.
For Windows 10 and VMware 6.7 initiators at default settings it
should make no change, since previous limits were sufficient there.
Tests of QD1 1MB writes from FreeBSD over 10GigE link show throughput
increase by 29% on idle connection and 132% with concurrent QD8 reads.
MFC after: 3 days
Sponsored by: iXsystems, Inc.
This is a regression issue after the new UAR API was introduced
by f8f5b459d21e .
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
It's rather confusing when adapter->hw and hw are mixed and matched
within a particular function.
Some of this was missed in cd1cf2fc1d49c509ded05dcd41b7600a5957fb9a
and r353778 respectively.
nids(4) was a clever idea in the early 2000's when the market was
flooded with 10/100 NICs with Windows-only drivers, but that hasn't been
the case for ages and the driver has had no meaningful maintenance in
ages. It only supports Windows-XP era drivers.
Also remove:
- ndis support from wpa_supplicant
- ndiscvt(8)
Reviewed By: emaste, bcr (manpages)
Differential Revision: https://reviews.freebsd.org/D27609
RFC 7143 (11.2.1.8):
An ITT value of 0xffffffff is reserved and MUST NOT be assigned for a
task by the initiator. The only instance in which it may be seen on
the wire is in a target-initiated NOP-In PDU (Section 11.19) and in
the initiator response to that PDU, if necessary.
MFC after: 1 month
This reverts commit aa37baf3d7cf51da92fd367476182802e71838ae.
The reverted commit was motivated by a problem observed on stable/12,
but it turns out that a better solution was committed in r348309 but not
MFCed. So, revert this change since it is unnecessary and not really
correct: it assumes that the order in which module metadata records is
defined determines their order in the output linker set. While this
seems to hold in my testing, it is not guaranteed.
Reported by: cem
Discussed with: imp
MFC after: 3 days
By default, axgbe driver does a receiver reset after predefined number
of retries for the link to come up. However, this receiver reset
doesn't always suffice, due to an hardware issue.
In that case, as a workaround, a complete phy reset is necessary.
This patch introduces a sysctl that can be set to 1 to let the driver
reset the phy completely, rather than just doing receiver reset.
The workaround will be removed once the issue is fixed by means
of firmware update.
This patch also fixes the handling of the direct attach cables
properly.
Submitted by: rajesh1.kumar_amd.com
Differential Revision: https://reviews.freebsd.org/D28266
Handle the case of a tagged command arriving when there's an untagged
one still outstanding gracefully instead of panicing.
While at it:
- Replace fancy arithmetics with a simple assignment as busy_itl can
only ever be either 0 or 1.
- Fix a comment typo in sym_free_ccb().
- In ___dma_getp(), remove dead code. [1]
- In sym_sir_bad_scsi_status(), add missing FALLTHROUGH. [2]
While at it:
- For getbaddrcb(), remove __unused from the nseg argument as it's in
fact used when compiling with INVARIANTS.
- In sym_int_sir(), ensure in all branches that cp is not NULL before
using it.
Reported by: Coverity
CID: 1008861 [1], 114996 [2]
PNP info definitions currently have an unfortunate requirement in that
they must follow the associated module definition in the module metadata
linker set. Otherwise devmatch can segfault while processing the linker
hints file since kldxref maintains the order in the linker set.
A number of drivers violate this requirement. In some cases this can
cause devmatch(8) to segfault when processing the linker hints file.
Work around the problem for now simply by adjusting the drivers.
Reviewed by: imp
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D28260
For hardware offload solicited data may potentially be handled more
efficiently than unsolicited due to direct data placement. Or there
can be some unsolicited write buffering limitations. It may create
situations where FirstBurstLength limit is really useful.
Software driver though has no those factors, having to do memcopy()
any way and having no so hard limit on the temporary storage. Same
time more active use of unsolicited transfers allows to avoid some
of Ready To Transfer (R2T) PDU round-trip times and processing.
This change effectively doubles from 64KB to 128KB the maximum size
of write command that can be transferred within one link RTT. Tests
of (64KB, 128KB] QD1 writes mixed with simultaneous QD8 reads over
the same connection, increasing RTT, shows almost double write speed
and half latency, while we should be able to afford few megabytes of
RAM for additional buffering on a target these days.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
This was blindly moved in r360722 but the variable being printed is not
yet initialised. It's of little use and can easily be added back in the
right place if needed by someone debugging, so just delete it.
Reported by: bryanv
Rather than have every device register itself for both virtio_pci and
virtio_mmio, provide a VIRTIO_DRIVER_MODULE wrapper to declare both,
merge VIRTIO_SIMPLE_PNPTABLE with VIRTIO_SIMPLE_PNPINFO and make the
latter register for both buses. This also has the benefit of abstracting
away the available transports and their names.
Reviewed by: bryanv
Differential Revision: https://reviews.freebsd.org/D28073
