d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
168,296 Commits 6 Branches 133 Tags 2.6 GiB
cfa5ef068f
Commit Graph

5 Commits

Author SHA1 Message Date
Justin T. Gibbs
2ca7463bc7 Properly handle suspend/resume events in the Xen device 
framework.

Sponsored by:	BQ Internet

sys/xen/xenbus/xenbusb.c:
	o In xenbusb_resume(), publish the state transition of the
	  resuming device into XenbusStateIntiailising so that the
	  remote peer can see it.  Recording the state locally is
	  not sufficient to trigger a re-connect sequence.
	o In xenbusb_resume(), defer new-bus resume processing until
	  after the remote peer's XenStore address has been updated.
	  The drivers may need to refer to this information during
	  resume processing.

sys/xen/xenbus/xenbusb_back.c:
sys/xen/xenbus/xenbusb_front.c:
	Register xenbusb_resume() rather than bus_generic_resume()
	as the handler for device_resume events.

sys/xen/xenstore/xenstore.c:
	o Fix grammer in a comment.
	o In xs_suspend(), pass suspend events on to the child
	  devices (e.g. xenbusb_front/back, that are attached
	  to the XenStore.

Approved by:	re
MFC after:	1 week
 2011-09-20 23:44:34 +00:00
Attilio Rao
a38f1f263b Remove pc_cpumask and pc_other_cpus usage from MI code. 
Tested by:	pluknet
 2011-06-13 13:28:31 +00:00
Justin T. Gibbs
283d6f7287 Monitor and emit events for XenStore changes to XenBus trees 
of the devices we manage.  These changes can be due to writes
we make ourselves or due to changes made by the control domain.
The goal of these changes is to insure that all state transitions
can be detected regardless of their source and to allow common
device policies (e.g. "onlined" backend devices) to be centralized
in the XenBus bus code.

sys/xen/xenbus/xenbusvar.h:
sys/xen/xenbus/xenbus.c:
sys/xen/xenbus/xenbus_if.m:
	Add a new method for XenBus drivers "localend_changed".
	This method is invoked whenever a write is detected to
	a device's XenBus tree.  The default implementation of
	this method is a no-op.

sys/xen/xenbus/xenbus_if.m:
sys/dev/xen/netfront/netfront.c:
sys/dev/xen/blkfront/blkfront.c:
sys/dev/xen/blkback/blkback.c:
	Change the signature of the "otherend_changed" method.
	This notification cannot fail, so it should return void.

sys/xen/xenbus/xenbusb_back.c:
	Add "online" device handling to the XenBus Back Bus
	support code.  An online backend device remains active
	after a front-end detaches as a reconnect is expected
	to occur in the near future.

sys/xen/interface/io/xenbus.h:
	Add comment block further explaining the meaning and
	driver responsibilities associated with the XenBus
	Closed state.

sys/xen/xenbus/xenbusb.c:
sys/xen/xenbus/xenbusb.h:
sys/xen/xenbus/xenbusb_back.c:
sys/xen/xenbus/xenbusb_front.c:
sys/xen/xenbus/xenbusb_if.m:
	o Register a XenStore watch against the local XenBus tree
	  for all devices.
	o Cache the string length of the path to our local tree.
	o Allow the xenbus front and back drivers to hook/filter both
	  local and otherend watch processing.
	o Update the device ivar version of "state" when we detect
	  a XenStore update of that node.

sys/dev/xen/control/control.c:
sys/xen/xenbus/xenbus.c:
sys/xen/xenbus/xenbusb.c:
sys/xen/xenbus/xenbusb.h:
sys/xen/xenbus/xenbusvar.h:
sys/xen/xenstore/xenstorevar.h:
	Allow clients of the XenStore watch mechanism to attach
	a single uintptr_t worth of client data to the watch.
	This removes the need to carefully place client watch
	data within enclosing objects so that a cast or offsetof
	calculation can be used to convert from watch to enclosing
	object.

Sponsored by:	Spectra Logic Corporation
MFC after:	1 week
 2011-06-11 04:59:01 +00:00
Attilio Rao
71a19bdc64 Commit the support for removing cpumask_t and replacing it directly with 
cpuset_t objects.
That is going to offer the underlying support for a simple bump of
MAXCPU and then support for number of cpus > 32 (as it is today).

Right now, cpumask_t is an int, 32 bits on all our supported architecture.
cpumask_t on the other side is implemented as an array of longs, and
easilly extendible by definition.

The architectures touched by this commit are the following:
- amd64
- i386
- pc98
- arm
- ia64
- XEN

while the others are still missing.
Userland is believed to be fully converted with the changes contained
here.

Some technical notes:
- This commit may be considered an ABI nop for all the architectures
  different from amd64 and ia64 (and sparc64 in the future)
- per-cpu members, which are now converted to cpuset_t, needs to be
  accessed avoiding migration, because the size of cpuset_t should be
  considered unknown
- size of cpuset_t objects is different from kernel and userland (this is
  primirally done in order to leave some more space in userland to cope
  with KBI extensions). If you need to access kernel cpuset_t from the
  userland please refer to example in this patch on how to do that
  correctly (kgdb may be a good source, for example).
- Support for other architectures is going to be added soon
- Only MAXCPU for amd64 is bumped now

The patch has been tested by sbruno and Nicholas Esborn on opteron
4 x 12 pack CPUs. More testing on big SMP is expected to came soon.
pluknet tested the patch with his 8-ways on both amd64 and i386.

Tested by:	pluknet, sbruno, gianni, Nicholas Esborn
Reviewed by:	jeff, jhb, sbruno
 2011-05-05 14:39:14 +00:00
Justin T. Gibbs
ff662b5c98 Improve the Xen para-virtualized device infrastructure of FreeBSD: 
o Add support for backend devices (e.g. blkback)
 o Implement extensions to the Xen para-virtualized block API to allow
   for larger and more outstanding I/Os.
 o Import a completely rewritten block back driver with support for fronting
   I/O to both raw devices and files.
 o General cleanup and documentation of the XenBus and XenStore support code.
 o Robustness and performance updates for the block front driver.
 o Fixes to the netfront driver.

Sponsored by: Spectra Logic Corporation

sys/xen/xenbus/init.txt:
	Deleted: This file explains the Linux method for XenBus device
	enumeration and thus does not apply to FreeBSD's NewBus approach.

sys/xen/xenbus/xenbus_probe_backend.c:
	Deleted: Linux version of backend XenBus service routines.  It
	was never ported to FreeBSD.  See xenbusb.c, xenbusb_if.m,
	xenbusb_front.c xenbusb_back.c for details of FreeBSD's XenBus
	support.

sys/xen/xenbus/xenbusvar.h:
sys/xen/xenbus/xenbus_xs.c:
sys/xen/xenbus/xenbus_comms.c:
sys/xen/xenbus/xenbus_comms.h:
sys/xen/xenstore/xenstorevar.h:
sys/xen/xenstore/xenstore.c:
	Split XenStore into its own tree.  XenBus is a software layer built
	on top of XenStore.  The old arrangement and the naming of some
	structures and functions blurred these lines making it difficult to
	discern what services are provided by which layer and at what times
	these services are available (e.g. during system startup and shutdown).

sys/xen/xenbus/xenbus_client.c:
sys/xen/xenbus/xenbus.c:
sys/xen/xenbus/xenbus_probe.c:
sys/xen/xenbus/xenbusb.c:
sys/xen/xenbus/xenbusb.h:
	Split up XenBus code into methods available for use by client
	drivers (xenbus.c) and code used by the XenBus "bus code" to
	enumerate, attach, detach, and service bus drivers.

sys/xen/reboot.c:
sys/dev/xen/control/control.c:
	Add a XenBus front driver for handling shutdown, reboot, suspend, and
	resume events published in the XenStore.  Move all PV suspend/reboot
	support from reboot.c into this driver.

sys/xen/blkif.h:
	New file from Xen vendor with macros and structures used by
	a block back driver to service requests from a VM running a
	different ABI (e.g. amd64 back with i386 front).

sys/conf/files:
	Adjust kernel build spec for new XenBus/XenStore layout and added
	Xen functionality.

sys/dev/xen/balloon/balloon.c:
sys/dev/xen/netfront/netfront.c:
sys/dev/xen/blkfront/blkfront.c:
sys/xen/xenbus/...
sys/xen/xenstore/...
	o Rename XenStore APIs and structures from xenbus_* to xs_*.
	o Adjust to use of M_XENBUS and M_XENSTORE malloc types for allocation
	  of objects returned by these APIs.
	o Adjust for changes in the bus interface for Xen drivers.

sys/xen/xenbus/...
sys/xen/xenstore/...
	Add Doxygen comments for these interfaces and the code that
	implements them.

sys/dev/xen/blkback/blkback.c:
	o Rewrite the Block Back driver to attach properly via newbus,
	  operate correctly in both PV and HVM mode regardless of domain
	  (e.g. can be in a DOM other than 0), and to deal with the latest
	  metadata available in XenStore for block devices.

	o Allow users to specify a file as a backend to blkback, in addition
	  to character devices.  Use the namei lookup of the backend path
	  to automatically configure, based on file type, the appropriate
	  backend method.

	The current implementation is limited to a single outstanding I/O
	at a time to file backed storage.

sys/dev/xen/blkback/blkback.c:
sys/xen/interface/io/blkif.h:
sys/xen/blkif.h:
sys/dev/xen/blkfront/blkfront.c:
sys/dev/xen/blkfront/block.h:
	Extend the Xen blkif API: Negotiable request size and number of
	requests.

	This change extends the information recorded in the XenStore
	allowing block front/back devices to negotiate for optimal I/O
	parameters.  This has been achieved without sacrificing backward
	compatibility with drivers that are unaware of these protocol
	enhancements.  The extensions center around the connection protocol
	which now includes these additions:

	o The back-end device publishes its maximum supported values for,
	  request I/O size, the number of page segments that can be
	  associated with a request, the maximum number of requests that
	  can be concurrently active, and the maximum number of pages that
	  can be in the shared request ring.  These values are published
	  before the back-end enters the XenbusStateInitWait state.

	o The front-end waits for the back-end to enter either the InitWait
	  or Initialize state.  At this point, the front end limits it's
	  own capabilities to the lesser of the values it finds published
	  by the backend, it's own maximums, or, should any back-end data
	  be missing in the store, the values supported by the original
	  protocol.  It then initializes it's internal data structures
	  including allocation of the shared ring, publishes its maximum
	  capabilities to the XenStore and transitions to the Initialized
	  state.

	o The back-end waits for the front-end to enter the Initalized
	  state.  At this point, the back end limits it's own capabilities
	  to the lesser of the values it finds published by the frontend,
	  it's own maximums, or, should any front-end data be missing in
	  the store, the values supported by the original protocol.  It
	  then initializes it's internal data structures, attaches to the
	  shared ring and transitions to the Connected state.

	o The front-end waits for the back-end to enter the Connnected
	  state, transitions itself to the connected state, and can
	  commence I/O.

	Although an updated front-end driver must be aware of the back-end's
	InitWait state, the back-end has been coded such that it can
	tolerate a front-end that skips this step and transitions directly
	to the Initialized state without waiting for the back-end.

sys/xen/interface/io/blkif.h:
	o Increase BLKIF_MAX_SEGMENTS_PER_REQUEST to 255.  This is
	  the maximum number possible without changing the blkif
	  request header structure (nr_segs is a uint8_t).

	o Add two new constants:
	  BLKIF_MAX_SEGMENTS_PER_HEADER_BLOCK, and
	  BLKIF_MAX_SEGMENTS_PER_SEGMENT_BLOCK.  These respectively
	  indicate the number of segments that can fit in the first
	  ring-buffer entry of a request, and for each subsequent
	  (sg element only) ring-buffer entry associated with the
          "header" ring-buffer entry of the request.

	o Add the blkif_request_segment_t typedef for segment
	  elements.

	o Add the BLKRING_GET_SG_REQUEST() macro which wraps the
	  RING_GET_REQUEST() macro and returns a properly cast
	  pointer to an array of blkif_request_segment_ts.

	o Add the BLKIF_SEGS_TO_BLOCKS() macro which calculates the
	  number of ring entries that will be consumed by a blkif
	  request with the given number of segments.

sys/xen/blkif.h:
	o Update for changes in interface/io/blkif.h macros.

	o Update the BLKIF_MAX_RING_REQUESTS() macro to take the
	  ring size as an argument to allow this calculation on
	  multi-page rings.

	o Add a companion macro to BLKIF_MAX_RING_REQUESTS(),
	  BLKIF_RING_PAGES().  This macro determines the number of
	  ring pages required in order to support a ring with the
	  supplied number of request blocks.

sys/dev/xen/blkback/blkback.c:
sys/dev/xen/blkfront/blkfront.c:
sys/dev/xen/blkfront/block.h:
	o Negotiate with the other-end with the following limits:
	      Reqeust Size:   MAXPHYS
	      Max Segments:   (MAXPHYS/PAGE_SIZE) + 1
	      Max Requests:   256
	      Max Ring Pages: Sufficient to support Max Requests with
	                      Max Segments.

	o Dynamically allocate request pools and segemnts-per-request.

	o Update ring allocation/attachment code to support a
	  multi-page shared ring.

	o Update routines that access the shared ring to handle
	  multi-block requests.

sys/dev/xen/blkfront/blkfront.c:
	o Track blkfront allocations in a blkfront driver specific
	  malloc pool.

	o Strip out XenStore transaction retry logic in the
	  connection code.  Transactions only need to be used when
	  the update to multiple XenStore nodes must be atomic.
	  That is not the case here.

	o Fully disable blkif_resume() until it can be fixed
	  properly (it didn't work before this change).

	o Destroy bus-dma objects during device instance tear-down.

	o Properly handle backend devices with powef-of-2 sector
	  sizes larger than 512b.

sys/dev/xen/blkback/blkback.c:
	Advertise support for and implement the BLKIF_OP_WRITE_BARRIER
	and BLKIF_OP_FLUSH_DISKCACHE blkif opcodes using BIO_FLUSH and
	the BIO_ORDERED attribute of bios.

sys/dev/xen/blkfront/blkfront.c:
sys/dev/xen/blkfront/block.h:
	Fix various bugs in blkfront.

       o gnttab_alloc_grant_references() returns 0 for success and
	 non-zero for failure.  The check for < 0 is a leftover
	 Linuxism.

       o When we negotiate with blkback and have to reduce some of our
	 capabilities, print out the original and reduced capability before
	 changing the local capability.  So the user now gets the correct
	 information.

	o Fix blkif_restart_queue_callback() formatting.  Make sure we hold
	  the mutex in that function before calling xb_startio().

	o Fix a couple of KASSERT()s.

        o Fix a check in the xb_remove_* macro to be a little more specific.

sys/xen/gnttab.h:
sys/xen/gnttab.c:
	Define GNTTAB_LIST_END publicly as GRANT_REF_INVALID.

sys/dev/xen/netfront/netfront.c:
	Use GRANT_REF_INVALID instead of driver private definitions of the
	same constant.

sys/xen/gnttab.h:
sys/xen/gnttab.c:
	Add the gnttab_end_foreign_access_references() API.

	This API allows a client to batch the release of an array of grant
	references, instead of coding a private for loop.  The implementation
	takes advantage of this batching to reduce lock overhead to one
	acquisition and release per-batch instead of per-freed grant reference.

	While here, reduce the duration the gnttab_list_lock is held during
	gnttab_free_grant_references() operations.  The search to find the
	tail of the incoming free list does not rely on global state and so
	can be performed without holding the lock.

sys/dev/xen/xenpci/evtchn.c:
sys/dev/xen/evtchn/evtchn.c:
sys/xen/xen_intr.h:
	o Implement the bind_interdomain_evtchn_to_irqhandler API for HVM mode.
	  This allows an HVM domain to serve back end devices to other domains.
	  This API is already implemented for PV mode.

	o Synchronize the API between HVM and PV.

sys/dev/xen/xenpci/xenpci.c:
	o Scan the full region of CPUID space in which the Xen VMM interface
	  may be implemented.  On systems using SuSE as a Dom0 where the
	  Viridian API is also exported, the VMM interface is above the region
	  we used to search.

	o Pass through bus_alloc_resource() calls so that XenBus drivers
	  attaching on an HVM system can allocate unused physical address
	  space from the nexus.  The block back driver makes use of this
	  facility.

sys/i386/xen/xen_machdep.c:
	Use the correct type for accessing the statically mapped xenstore
	metadata.

sys/xen/interface/hvm/params.h:
sys/xen/xenstore/xenstore.c:
	Move hvm_get_parameter() to the correct global header file instead
	of as a private method to the XenStore.

sys/xen/interface/io/protocols.h:
	Sync with vendor.

sys/xeninterface/io/ring.h:
	Add macro for calculating the number of ring pages needed for an N
	deep ring.

	To avoid duplication within the macros, create and use the new
	__RING_HEADER_SIZE() macro.  This macro calculates the size of the
	ring book keeping struct (producer/consumer indexes, etc.) that
	resides at the head of the ring.

	Add the __RING_PAGES() macro which calculates the number of shared
	ring pages required to support a ring with the given number of
	requests.

	These APIs are used to support the multi-page ring version of the
	Xen block API.

sys/xeninterface/io/xenbus.h:
	Add Comments.

sys/xen/xenbus/...
	o Refactor the FreeBSD XenBus support code to allow for both front and
	  backend device attachments.

	o Make use of new config_intr_hook capabilities to allow front and back
	  devices to be probed/attached in parallel.

	o Fix bugs in probe/attach state machine that could cause the system to
	  hang when confronted with a failure either in the local domain or in
	  a remote domain to which one of our driver instances is attaching.

	o Publish all required state to the XenStore on device detach and
	  failure.  The majority of the missing functionality was for serving
	  as a back end since the typical "hot-plug" scripts in Dom0 don't
	  handle the case of cleaning up for a "service domain" that is not
	  itself.

	o Add dynamic sysctl nodes exposing the generic ivars of
	  XenBus devices.

	o Add doxygen style comments to the majority of the code.

	o Cleanup types, formatting, etc.

sys/xen/xenbus/xenbusb.c:
	Common code used by both front and back XenBus busses.

sys/xen/xenbus/xenbusb_if.m:
	Method definitions for a XenBus bus.

sys/xen/xenbus/xenbusb_front.c:
sys/xen/xenbus/xenbusb_back.c:
	XenBus bus specialization for front and back devices.

MFC after:	1 month
 2010-10-19 20:53:30 +00:00