To workaround buggy firmware that sets this flag when there's actually
a VGA present.
Reported and tested by: Yasuhiro KIMURA <yasu@utahime.org>
Sponsored by: Citrix Systems R&D
Reviewed by: kib
Differential revision: https://reviews.freebsd.org/D16003
than assigning spigen device names in order of creation, this uses a device
name that corresponds to the owning spibus and chip-select index.
Example: /dev/spigen0.1 would be a child of spibus0, and use cs = 1
The intent is for systems like Raspberry Pi to have a consistent way of
using an SPI interface with a specific cs value from a user application.
Otherwise, there is no consistent way of knowing which cs pin will be
assigned to a particular spigen device. The alternative is to specify
everything in "the right order" in an overlay file, which is less than
ideal. Additionally, this duplicates (to some extent) the way Linux handles
a similar situation with their 'spidev' device, so it would be somewhat
familiar to those who also use Linux.
A new kernel config option, SPIGEN_LEGACY_CDEVNAME, causes the driver to
also create /dev/spigenN device name aliases, with N incrementing in the
order of device instantiation. This is provided to ease the transition
for existing systems using the original naming convention (particularly
when these changes are MFC'd to stable branches).
Differential Revision: https://reviews.freebsd.org/D15301
Without a call to check_free_callbacks() clients waiting for grant
references would not be woken up even when there are sufficient grant
references available.
The check was likely left out as a mistake when the function was first
added.
Note that other functions used to free grant references already call
check_free_callbacks.
Submitted by: pratyush
Reviewed by: royger
Differential review: https://reviews.freebsd.org/D15899
Summary: In order to use cpufreq(4), a dev.cpu attachment must be created. If
the IBM property is found denoting SMT, attach only to the first thread setup,
so that a cpufreq device can bind.
Reviewed by: nwhitehorn
Differential Revision: https://reviews.freebsd.org/D15921
The veriexec device features the following ioctl commands:
VERIEXEC_ACTIVE
Activate veriexec functionality
VERIEXEC_DEBUG_ON
Enable debugging mode and increment or set the debug level
VERIEXEC_DEBUG_OFF
Disable debugging mode
VERIEXEC_ENFORCE
Enforce veriexec fingerprinting (and acitvate if not already)
VERIEXEC_GETSTATE
Get current veriexec state
VERIEXEC_LOCK
Lock changes to veriexec meta-data store
VERIEXEC_LOAD
Load veriexec fingerprint if secure level is not raised (and passes the
checks for VERIEXEC_SIGNED_LOAD)
VERIEXEC_SIGNED_LOAD
Load veriexec fingerprints from loader that supports signed manifest
(and thus we can be more lenient about secure level being raised.)
Fingerprints can be loaded if the meta-data store is not locked. Also
securelevel must not have been raised or some fingerprints must have
already been loaded, otherwise it would be dangerous to allow loading.
(Note: this assumes that the fingerprints in the meta-data store at
least cover the fingerprint loader.)
Reviewed by: jtl
Obtained from: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D8561
can time out if it's backed up due to a non-stop deluge of PAUSE frames
from a misbehaving peer. Detect this situation and toggle MPS TxEn
to allow forward progress.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Add macros for R12A_RXDMA_PRO register (descriptions were seen in the
RTL8822B vendor driver) and merge 2 r21au_init_burstlen() copies.
No functional change intended.
Update the driver to use iflib in order to bring performance,
maintainability, and (hopefully) stability benefits to the driver.
The driver currently isn't completely ported; features that are missing:
- VF driver (ixlv)
- SR-IOV host support
- RDMA support
The plan is to have these re-added to the driver before the next FreeBSD release.
Reviewed by: gallatin@
Contributions by: gallatin@, mmacy@, krzysztof.galazka@intel.com
Tested by: jeffrey.e.pieper@intel.com
MFC after: 1 month
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D15577
Add a few intermediate casts to intptr_t to suppress "cast to pointer
from integer of different size" warnings from gcc. In this case, the
'arg2' part of SYSCTL_HANDLER_ARGS is used to pass in a pointer, via an
intermediate intmax_t, so no information is lost.
Reviewed by: avg
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D15725
For most regulators, the regulator_stop() method can be transformed to
regulator disable. But, in some cases, we needs to maintain shared data
across multiple regulators (e.g. single GPIO pin which works as enable
for multiple regulates). In this case, the implementation of regulator
should perform his own enable counting therefore it is necessary to
distinguish between the regulator enable/disable method (which
increments/decrements enable counter for shared resource) and regulator
stop method (which don't affect it).
So:
- add regnode_stop() method to regulator framework and default it to
regnode_enable(..., false, ...)
- implement it in regulator_fixed with proper enable counting.
While I'm in, also fix handling of always_on property. If any of regulators
sharing same GPIO pin have it enabled, then none of them can disable regulator.
Tested by: kevans
MFC after: 3 weeks
of descriptors processed. Add the ability to gather a certain maximum
number of frames in the driver's rx before waking up netmap rx. If
there aren't enough frames then netmap rx will be woken up as usual.
hw.cxgbe.nm_rx_nframes
Sponsored by: Chelsio Communications
Summary:
Newer OPAL device trees, such as those on POWER9 systems, use 'pciex' for
device_type, not 'pci'. Rather than enumerating all possible variants, just
check for a 'pci' prefix.
Reviewed by: nwhitehorn, breno.leitao_gmail.com
Differential Revision: https://reviews.freebsd.org/D15817
The driver assumes the list can change (even though it does't right now)
and queries it every time the sysctl runs.
sysctl dev.<nexus>.<inst>.local_cpus
sysctl dev.<nexus>.<inst>.intr_cpus
sysctl dev.t6nex.0.local_cpus
sysctl dev.t6nex.0.intr_cpus
Sponsored by: Chelsio Communications
These are represented as booleans on the kernel-side, but were being exposed
as int. This was causing some funky things to happen when read later with
sysctl(8), e.g. randomly reading super-high when the value was actually
'0'/false.
Reviewed by: manu
original initialization, so we don't miss few registers to
configure.
This fixes vtnet(4) operation with QEMU's virtio-net-device.
Tested in QEMU with FreeBSD/RISC-V.
Reviewed by: bryanv
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15821
This was the wrong solution to the problem; regulator_shutdown invokes
regnode_stop. regulator_stop is not a refcounting method, but it invokes
regnode_enable, which is.
mmel@ has a proposed patch/solution to instead provide regnode_fixed_stop
behavior that properly takes shared GPIO pins into account.
Only the first device will print
coretemp0: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu0
instead of all hyper threads
Submitted by: kbowling
Reviewed by: imp, sbruno
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15727
regnode::enable_cnt is generally used to refcount regulator nodes. For
GPIOs, the refcount was done on the gpio_entry since more than one regulator
can share a GPIO.
GPIO regulators were not taking part in the node refcount, since they had
their own mechanism. This caused some fallout after manu started disabling
everybody's unused regulators in r331989.
Refcount it.
Glanced over by: manu
Mark the PNP table, but still need to handle the CLASS / SUBCLASS /
REVID matching.
Reviewed by: imp, chuck
Submitted by: Lakhan Shiva Kamireddy <lakhanshiva@gmail.com>
Sponsored by: Google, Inc. (GSoC 2018)
to call into the firmware in a similar way to the existing PSCI, and used
PSCI to detect when SMCCC is enabled.
There is a function ID space we can use. Currently we only support 3
functions in the ARM Architecture Calls region, however it is expected we
will expend these in the future.
Sponsored by: DARPA, AFRL
Some casts from pointers to uint64_t and back in lio_main.c cause base
gcc on i386 to warn "cast from pointer to integer of different size",
and vice versa. Add additional casts to uintptr_t to suppress these.
Reviewed by: sbruno
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D15754
Generating the pnp info have the side effect to include all nodes even
if the status isn't "okay".
That means that loading the module will load but not attach as it checks
the status in the probe function.
On pine64 before :
root@pine64-lts:~ # devmatch -u
unattached on ofwbus pnpinfo name=memory
unattached on ofwbus pnpinfo name=chosen
unattached on ofwbus pnpinfo name=sound_spdif compat=simple-audio-card
unattached on ofwbus pnpinfo name=spdif-out compat=linux,spdif-dit
unattached on simplebus pnpinfo name=dma-controller@1c02000 compat=allwinner,sun50i-a64-dma
unattached on simplebus pnpinfo name=mmc@1c10000 compat=allwinner,sun50i-a64-mmc
unattached on simplebus pnpinfo name=usb@1c19000 compat=allwinner,sun8i-a33-musb
unattached on simplebus pnpinfo name=spdif@1c21000 compat=allwinner,sun50i-a64-spdif
unattached on simplebus pnpinfo name=i2s@1c22000 compat=allwinner,sun50i-a64-i2s
unattached on simplebus pnpinfo name=i2s@1c22400 compat=allwinner,sun50i-a64-i2s
unattached on simplebus pnpinfo name=serial@1c28400 compat=snps,dw-apb-uart
unattached on simplebus pnpinfo name=serial@1c28800 compat=snps,dw-apb-uart
unattached on simplebus pnpinfo name=serial@1c28c00 compat=snps,dw-apb-uart
unattached on simplebus pnpinfo name=serial@1c29000 compat=snps,dw-apb-uart
unattached on simplebus pnpinfo name=i2c@1c2ac00 compat=allwinner,sun6i-a31-i2c
unattached on simplebus pnpinfo name=i2c@1c2b000 compat=allwinner,sun6i-a31-i2c
unattached on simplebus pnpinfo name=i2c@1c2b400 compat=allwinner,sun6i-a31-i2c
unattached on ofwbus pnpinfo name=aliases
unattached on ofwbus pnpinfo name=symbols
All simplebus node are disabled
After :
root@pine64-lts:~ # devmatch -u
unattached on ofwbus pnpinfo name=memory
unattached on ofwbus pnpinfo name=chosen
unattached on ofwbus pnpinfo name=sound_spdif compat=simple-audio-card
unattached on ofwbus pnpinfo name=spdif-out compat=linux,spdif-dit
unattached on simplebus pnpinfo name=dma-controller@1c02000 compat=allwinner,sun50i-a64-dma
unattached on simplebus pnpinfo name=usb@1c19000 compat=allwinner,sun8i-a33-musb
unattached on ofwbus pnpinfo name=aliases
unattached on ofwbus pnpinfo name=symbols
Reviewed by: imp (with some objection)
Differential Revision: https://reviews.freebsd.org/D15770
This is in preperation for supporting newer smccc functions that also use
the same call method.
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D15745
It was needed only for ia64 where it was implemented as a call to
bswapXX, which was always a real function. htobeXX with a constant
argument is calculated at compile-time everywhere else.
MFC after: 1 week
Sponsored by: Chelsio Communications
lan78xx_eeprom_read just checked for EEPROM presence then called
lan78xx_eeprom_read_raw if present, and had only one caller. Introduce
lan78xx_eeprom_present to check for EEPROM presence, and use it in the
one place it is needed.
This is used by r334964, which was accidentally committed out-of-order
from my work tree.
Reported by: markj
Sponsored by: The FreeBSD Foundation
Differences between LAN7800 and LAN7850 from the driver's perspective:
* The LAN7800 muxes EEPROM signals with LEDs, so LED mode needs to be
disabled when reading/writing EEPROM. The EEPROM is not muxed on the
LAN7850.
* The Linux driver enables automatic duplex and speed detection when
there is no EEPROM, for the LAN7800 only. With this FreeBSD driver
LAN7850-based adapters without a configuration EEPROM fail to link
(with or without the automatic duplex and speed detection code), so
I have just followed the example of the Linux driver for now.
Sponsored by: The FreeBSD Foundation
Sponsored by: Microchip (hardware)
Casting from rman_res_t to a pointer results in "cast to pointer from
integer of different size" warnings with base gcc on i386, so print
these without casting. The kva field of struct bxe_bar is of type
vm_offset_t, which can be 32 or 64 bit, so cast it to uintmax_t before
printing.
Reviewed by: markj
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D15733
Base gcc fails to compile sys/dev/drm2/i915/intel_display.c for i386,
with the following -Werror warnings:
cc1: warnings being treated as errors
/usr/src/sys/dev/drm2/i915/intel_display.c:8884: warning:
initialization from incompatible pointer type
This is due to https://gcc.gnu.org/bugzilla/show_bug.cgi?id=36432, which
incorrectly interprets the [] as a flexible array member.
Because base gcc does not have a -W flag to suppress this particular
warning, it requires a rather ugly cast. To not influence any other
compiler, put it in a #if/#endif block.
Reviewed by: kib
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D15744
Add a few intermediate casts to uintptr_t to suppress "cast to pointer
from integer of different size" warnings from gcc. Also remove a few
incorrect casts.
Reviewed by: ram
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D15747
These ioctls are not documented and only stubbed in a few drivers: mse(4),
psm(4) and syscon's sysmouse(4). The only exception is MOUSE_GETVARS
implemented in psm(4)
Given the fact that they were introduced 20 years ago and implementation
has never been completed, remove any related code.
PR: 228718 (exp-run)
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D15726
when parsing the phy type, however this is included in the length returned
by OF_getprop. To fix this stop ignoring the terminator.
PR: 228828
Reported by: sbruno
Sponsored by: DARPA, AFRL
If we fail noise floor calibration then we may end up with a deaf NIC
which we can't recover without a full chip reset.
Earlier chips seem to get less stuck in this condition versus AR9280/later
and AR9300/later, but whilst here just fix up the AR5212 era chips to also
return NF calibration failures.
This HAL routine would only return failure if the channel was not configured.
This is a no-op until the driver side code for doing resets and the HAL
code for being told about the reset type (and then handling it!) is
implemented.
Tested:
* AR9280, STA mode
* AR2425, STA mode
* AR9380, STA mode
pmc_process_interrupt takes 5 arguments when only 3 are needed.
cpu is always available in curcpu and inuserspace can always be
derived from the passed trapframe.
While facially a reasonable cleanup this change was motivated
by the need to workaround a compiler bug.
core2_intr(cpu, tf) ->
pmc_process_interrupt(cpu, ring, pmc, tf, inuserspace) ->
pmc_add_sample(cpu, ring, pm, tf, inuserspace)
In the process of optimizing the tail call the tf pointer was getting
clobbered:
(kgdb) up
at /storage/mmacy/devel/freebsd/sys/dev/hwpmc/hwpmc_mod.c:4709
4709 pmc_save_kernel_callchain(ps->ps_pc,
(kgdb) up
1205 error = pmc_process_interrupt(cpu, PMC_HR, pm, tf,
resulting in a crash in pmc_save_kernel_callchain.
Fix the behavior of ofw_fdt_getprop() and ofw_fdt_getprop() functions to match
the documentation as the non-fdt code.
Submitted by: Luis Pires <lffpires@ruabrasil.org>
Reviewed by: manu, jhibbits
Approved by: jhibbits (mentor)
Differential Revision: https://reviews.freebsd.org/D15680
On PowerNV systems, the rootfs is passed through kexec, which loads the rootfs
into memory and set two fdt entries to describe where the file is located in
the memory;
I need to pass this memory region to the md device as a mfs_root, but, current
md driver does not support two things:
* Just getting a pointer from an external (bootloader) memory. If I need to
workaround it, I would need to declare a static array and memcopy from this
external memory to this static variable.
* The size of the image. The usage of mfs_root_end, which is not a pointer,
seems to be not possible for this prestaged scenario.
This patch simply adds a new way to load mfs_root from memory.
Differential Revision: https://reviews.freebsd.org/D15625
Approved by: kib, jhibbits (mentor)
- add '-j' options to filter to enable converting native pmc
log format to json lines format to enable the use of scripts
and external tooling
% pmc filter -j pmc.log pmc.jsonl
- Record the tsc value in sampling interrupts as opposed to
recording nanotime when the sample is copied to a global log
in hardclock - potentially many milliseconds later.
- At initialize record the tsc_freq and the time of day to give
us an offset for translating the tsc values in callchain records
Utility hangs when OCS_IOCTL_CMD_MGMT_GET_ALL called in parallel on port 0 and port 1.
Fix: Using static structure for results is corrupting the second ioctl request. Removed static for results structure.
Approved by: ken
MFC after: 3 days
This adds several vendors from NetBSD's copy of the same file (r1.749).
Prefer longer more "canonical" names where the names differed.
Sort while here.
By logging all threads and processes 'pmc filter'
can now filter on process or thread name, relieving
the user of the burden of determining which tid or
pid was which when the sample was taken.
% pmc filter -T if_io_tqg -P nginx pmc.log pmc-iflib.log
% pmc filter -x -T idle pmc.log pmc-noidle.log
- increase pmc cpuid field from 8 to 12 bits
- add cpuid version string to initialize entry in the log
so that filter can identify which counter index an
event name maps to
- GC unused config flags
- make fixed counter assignment more robust as well as the
changes needed to be properly identified for filter
This adds the -U options to pmcstat which will attribute in-kernel samples
back to the user stack that invoked the system call. It is not the default,
because when looking at kernel profiles it is generally more desirable to
merge all instances of a given system call together.
Although heavily revised, this change is directly derived from D7350 by
Jonathan T. Looney.
Obtained from: jtl
Sponsored by: Juniper Networks, Limelight Networks
Some of the routines were using artificially limited builtin already,
drop the explicit limit.
The use of builtins allows quite often allows the compiler to elide the call
or most zeroing to begin with. For instance, if the target object is 32 bytes
in size and gets zeroed + has 16 bytes initialized, the compiler can just
add code to zero out the rest.
Note not all the primites have asm variants and some of the existing ones
are not optimized. Maintaines are strongly encourage to take a look
(regardless of this change).
or 4 CPUs. Add a compile-time option SC_KERNEL_CONS_ATTRS to control the
defaults.
Default to color numbers in reverse order to CPU numbers (instead of
in the same order with white first and wrapping to dark grey), so that
the brightest bright colors are used first. Don't use dark grey at all;
replace it by dark green.
Syscons has too many compile-time options, but this one is needed in
in case the defaults give something like white on white, or the user
really hates this feature and can't wait to turn it off in rc.
MFC after: next release?
The per-CPU ts is not initialized early, so the global kernel ts is used
early, but it ony has 1 (normal) attribute. Switch this to the per-CPU
attribute.
The difference is most visible with EARLY_AP_STARTUP.
Change to using the curcpu macro instead of PCPU_GET(cpuid) in 2 places for
the above and in 1 other place in my old code in syscons. The function-like
spelling is perhaps better for indicating that curcpu is volatile (unlike
curthread), but for CPU attributes volatility is a feature.
The SCHEDULER_STOPPED() hack breaks locking generally, and
mtx_trylock_*() especially. When mtx_trylock_*() returns nonzero,
naive code version here trusts it to have worked. But when
SCHEDULER_STOPPED() is true, mtx_trylock_*() returns 1 without doing
anything. Then mtx_unlock_*() crashes especially badly attempting to
unlock iff the error is detected, since mutex unlocking functions don't
check SCHEDULER_STOPPED().
syscons already didn't trust mtx_trylock_spin(), but it was missing the
logic to turn on sp->kdb_locked when turning off sp->mtx_locked during
panics. It also used panicstr instead of SCHEDULER_LOCKED because I
thought that panicstr was more fragile. They only differ for a window
of lines in panic(), and in broken cases where stop_cpus_hard() in panic()
didn't work.
I want to do this change because this call (actually,
AcpiHwLegacyWakePrep) does a memory allocation and ACPI namespace
evaluation. Although it is not very likely to run into any trouble, it
is still not safe to make those calls with interrupts disabled.
witness(4) and malloc(9) do not currently check for a context with
interrupts disabled via intr_disable and we lack a facility for doing
that. So, those unsafe operations fly under the radar. But if
intr_disable in acpi_EnterSleepState was replaced with spinlock_enter
(which it probably should be), then witness and malloc would immediately
complain.
Also, AcpiLeaveSleepStatePrep is documented as called when interrupts
are enabled. It used to require disabled interrupts, but that
requirement was changed a long time ago when support for _BFS and _GTS
was removed from ACPICA.
The ACPI wakeup sequence is very sensitive to changes. I consider this
change to be correct, but there can be fallouts from it.
What AcpiHwLegacyWakePrep essentially does is writing a value
corresponding to S0 into SLP_TYPx bits of PM1 Control Register(s).
According to ACPI specifications that write should be a NOP as SLP_EN
bit is not set. But I see in some chipset specifications that they
allow to ignore SLP_EN altogether and to act on a change of SLP_TYPx
alone.
Also, there are a couple of accesses to ACPI hardware before the new
location of the call to AcpiLeaveSleepStatePrep. One is to clear the
power button status and the other is to enable SCI. So, the move may
affect the interaction between then OS and ACPI platform.
I have not seen any regressions on my test system, but it's a desktop.
MFC after: 5 weeks
Intel now provides comprehensive tables for all performance counters
and the various valid configuration permutations as text .json files.
Libpmc has been converted to use these and hwpmc_core has been greatly
simplified by moving to passthrough of the table values.
The one gotcha is that said tables don't support pentium pro and and pentium
IV. There's very few users of hwpmc on _amd64_ kernels on new hardware. It is
unlikely that anyone is doing low level optimization on 15 year old Intel
hardware. Nonetheless, if someone feels strongly enough to populate the
corresponding tables for p4 and ppro I will reinstate the files in to the
build.
Code for the K8 counters and !x86 architectures remains unchanged.
- move harvest mask check inline
- move harvest mask to frequently_read out of actively
modified cache line
- disable ether_input collection and describe its limitations
in NOTES
Typically entropy collection in ether_input was stirring zero
in to the entropy pool while at the same time greatly reducing
max pps. This indicates that perhaps we should more closely
scrutinize how much entropy we're getting from a given source
as well as what our actual entropy collection needs are for
seeding Yarrow.
Reviewed by: cem, gallatin, delphij
Approved by: secteam
Differential Revision: https://reviews.freebsd.org/D15526
bhyve's root PCI complex shows up as PCIe, but behaves as traditional PCI.
Until that is special cased in a root complex driver, leave x86 as it was.
Requested by: grehan
for a port. Fix other related issues while here:
- Require port lock for access to link_config.
- Allow 100Mbps operation by tracking the speed in Mbps. Yes, really.
- New port flag to indicate that the media list is immutable. It will
be used in future refinements.
This also fixes a bug where the driver reports incorrect media with
recent firmwares.
MFC after: 2 days
Sponsored by: Chelsio Communications
overscan and synthesize it from the display depth and screen width.
This may not be right, but it sometimes right and is better than
returning CN_DEAD.
Summary:
PCIe only permits 1 device on an endpoint, so some devices ignore the device
part of B:D:F probing. Although ARI likely fixes this, not all platforms
support ARI completely or correctly, so some devices end up showing up 32
times on the bus.
This was found during bringup of POWER9/Talos, and has been tested on POWER9
and POWER8 hardware.
Reviewed by: leitao
Differential Revision: https://reviews.freebsd.org/D15461
many excluded regions causing a buffer overflow in the early boot code if
this value is too small.
Obtained from: ABT Systems Ltd
Sponsored by: Turing Robotic Industries
This change adds a new optional console method cn_resume and a kernel
console interface cnresume. Consoles that may need to re-initialize
their hardware after suspend (e.g., because firmware does not care to do
it) will implement cn_resume. Note that it is called in rather early
environment not unlike early boot, so the same restrictions apply.
Platform specific code, for platforms that support hardware suspend,
should call cnresume early after resume, before any console output is
expected.
This change fixes a problem with a system of mine failing to resume when
a serial console is used. I found that the serial port was in a strange
configuration and an attempt to write to it likely resulted in an
infinite loop.
To avoid adding cn_resume method to every console driver, CONSOLE_DRIVER
macro has been extended to support optional methods.
Reviewed by: imp, mav
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D15552
Add USB product ID for two GENESYS LOGIC ICs, found in DELOCK
In-Desk-Hub 61991
PR: 228489
Submitted by: "Harald Schmalzbauer" <bugzilla.freebsd@omnilan.de>
MFC After: 3 weeks
The hardware rate limiting feature is enabled by the RATELIMIT kernel
option. Please refer to ifconfig(8) and the txrtlmt option and the
SO_MAX_PACING_RATE set socket option for more information. This
feature is compatible with hardware transmit send offload, TSO.
A set of sysctl(8) knobs under dev.mce.<N>.rate_limit are provided to
setup the ratelimit table and also to fine tune various rate limit
related parameters.
Sponsored by: Mellanox Technologies
The GMII control bit ETH_MAC_CR_GMII_EN_ is not documented in
LAN78xx datasheets, but from the permissively licensed header provided
by Microchip it is:
#define ETH_MAC_CR_GMII_EN (0x00080000UL ) // GMII/RGMII Selection
is that current one (mass storage device) doesn't work as it is - it
needs to be set to 0 after the LUN is configured, which is what the
cfumass rc script does. In other words: the current default does not
work, and to actually make it work it had to be set to -1 in
/boot/loader.conf.
Reviewed by: hselasky@
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
- Add support for Leadtek WinFast Tv2000 XP bktr card
- Add support for PHILIPS FI1216
PR: 94369
Submitted by: Angelescu Ovidiu <mrhsaacdoh@yahoo.com>
Submitted on: 2006-03-11 19:30 UTC
vendor provided pmu-events tables and sundry cleanups.
The vendor pmu-events tables provide counter descriptions, default
sample rates, event, umask, and flag values for all the counter
configuration permutations. Using this gives us:
- much simpler kernel code for the MD component
- helpful long and short event descriptions
- simpler user code
- sample rates that won't overload the system
Update man page with newer sample types and remove unused sample type.
vendor provided pmu-events tables and sundry cleanups.
The vendor pmu-events tables provide counter descriptions, default
sample rates, event, umask, and flag values for all the counter
configuration permutations. Using this gives us:
- much simpler kernel code for the MD component
- helpful long and short event descriptions
- simpler user code
- sample rates that won't overload the system
Update man page with newer sample types and remove unused sample type.
Squashed commit of the following:
commit 4459d43eff815bec08ccc5533dbe5de846f03128
Author: Matt Macy <mmacy@mattmacy.io>
Date: Sat May 26 00:06:31 2018 -0700
libpmc: fix pmu function signatures for non amd64
commit a2cb8bbc586c65d41f9b291430a2261ec67b59fe
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 22:38:11 2018 -0700
pmcstat: fix indentation of usage
commit f686954b15ff56a833ac80404898977cb80a265b
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 22:19:49 2018 -0700
pmclog(3): add callchain and pmcallocatedyn, remove pcsample
commit 73e13a0d2e9498c81c150d14d022050cee7511bb
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 22:19:00 2018 -0700
pmclog.h: GC pcsample field
commit 3e93ffd65da641fa657539dad3c48e281f8b5798
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 22:05:57 2018 -0700
hwpmc: make Intel core CPUs use external event tables
commit 634f5fae1e1644ac324003136c66cd9c619d1c93
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 22:00:06 2018 -0700
pmclog: update log record types, bump PMC_MAJOR
- explicitly make log record types a multiple of 8 bytes
- hook in pmu event types for pmc_allocate records
- remove references to no longer PCSAMPLE record
commit 83d84fcd2d65bdf6ddcb2e155a22f0cfa2a9c225
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 21:52:10 2018 -0700
libpmc: add support for having vendor table driven pmc_allocate
commit 9e6ad63c40c2fce8404847ace5078ca6cb33a736
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 19:11:33 2018 -0700
hwpmc_core: add accessors for EVSEL & UMASK, make IAP_UMASK useful to user
commit 859dceb93daa6419a48c794db99b6758e5b041c9
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 19:09:45 2018 -0700
pmcstat: update usage and man page as well as make -L consistent with pmccontrol
commit 79c7d8597e28c2eb13f5f9113e65ec2792ca57b1
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 18:07:03 2018 -0700
pmu_util: add support for all current intel event keywords
commit d8089c7f6a6c8527f38324252b1ffb47004694c6
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 17:45:00 2018 -0700
add description for new arguments
commit 058336740bab53c62ec88a3a026ea848cf3878c6
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 17:38:15 2018 -0700
libpmc: move pmu_events table and pmu_utils out of libpmcstat so that they can be used by pmc_allocate
commit 049b66b382e2f833c3f47bc8df9e750cb265709f
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 16:12:41 2018 -0700
pmcstat: hook pmu_events counter description utility routines in
commit f5e01e7b37a691dc045e1aa16b3ebdd162515de8
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 16:11:59 2018 -0700
pmu_events: add utility routines for listing counters and their descriptions
commit cba4d4f8907f772279f86f18f915e0d74d33ac56
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 16:09:50 2018 -0700
pmu-events: expand out skylake regex to simplify string matches
omcast was used without being initialized in the non-multicast case.
The only effect was that the interface's multicast output counter could be
incorrect.
Reported by: Coverity
CID: 1379662
MFC after: 3 days
Sponsored by: Dell EMC
Since GENERIC includes quite a few drivers now, all MMC drivers should have
appropriate MMCCAM-related ifdefs and include opt_mmccam.h so that
those ifdefs are actually processed correctly.
Reviewed by: manu
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D15569
Previously lan78xx_chip_init locked the driver's mutex if not already
locked, but unlocked it only in the case of error. This provided a
fairly clear indication that the function is already called with the
lock held, so just replace it with a lock assertion.
Sponsored by: The FreeBSD Foundation
The TSC-s are checked and synchronized only if they were good
originally. That is, invariant, synchronized, etc.
This is necessary on an AMD-based system where after a wakeup from STR I
see that BSP clock differs from AP clocks by a count that roughly
corresponds to one second. The APs are in sync with each other. Not
sure if this is a hardware quirk or a firmware bug.
This is what I see after a resume with this change:
SMP: passed TSC synchronization test after adjustment
acpi_timer0: restoring timecounter, ACPI-fast -> TSC-low
Reviewed by: kib
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D15551
- Remove layering violation, when NVMe SIM code accessed CAM internal
device structures to set pointers on controller and namespace data.
Instead make NVMe XPT probe fetch the data directly from hardware.
- Cleanup NVMe SIM code, fixing support for multiple namespaces per
controller (reporting them as LUNs) and adding controller detach support
and run-time namespace change notifications.
- Add initial support for namespace change async events. So far only
in CAM mode, but it allows run-time namespace arrival and departure.
- Add missing nvme_notify_fail_consumers() call on controller detach.
Together with previous changes this allows NVMe device detach/unplug.
Non-CAM mode still requires a lot of love to stay on par, but at least
CAM mode code should not stay in the way so much, becoming much more
self-sufficient.
Reviewed by: imp
MFC after: 1 month
Sponsored by: iXsystems, Inc.
I'm in the process of reworking how the reset path works with an eye
to better recovery when the chips hang and/or go RF/PHY deaf.
This is the first step in a lot of unification and API changes.
It was introduced to the tree in r169320 and r169321 in May 2007.
It never got much use and never became a kernel default. The code
duplicates the default path quite a bit, with slight modifications. Just
yank out the cruft. Whatever goals were being aimed for can probably be met
within the existing framework, without a flag day option.
Mostly mechanical change: 'unifdef -m -UINTR_FILTER'.
Reviewed by: mmacy
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D15546
This driver was developed for the LAN7800 and the register-compatible
LAN7515 and has only been tested on those devices. Adding support for
other members of the family should be straightforward, once we have
devices to test.
With this change the driver will probe but fail to attach due to the
Chip ID check, but will leave a hint leading to the driver that needs
work.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15537
Remove the device from the list before unbinding it. Doing it in this
order allows calling xen_intr_unbind without holding the bind_mutex
lock.
Sponsored by: Citrix Systems R&D
