Building and installing architecture-specific man pages only raises a number of
problems:
* The https://www.freebsd.org/cgi/man.cgi is incomplete. As an
example, it does not show results for pae(4). The reason for this is
that the cgi interface runs on FreeBSD amd64.
* In FreeBSD amd64 some manual pages have broken X-refs. See hptrr(4)
for an example.
* Also, we have broken links in our Release Notes. This is a
consequence of the first point. See
https://www.freebsd.org/releases/13.0R/hardware/#proc-i386.
Make MAN_ARCH default to 'all' so we build all the man pages for all the
architectures. The difference in disk space is negligible. Also link
architecture-specific man pages to their own section while keeping their own
namespace.
PR: 212290
Reported by: mj@bsdops.com
Approved by: ceri@, wosch@
MFC after: 4 weeks
Portsnap uses patches opportunistically to reduce download bandwidth: It
attempts to fetch patches which could be useful, and then makes use of
whichever patches it actually gets. (This solves the otherwise O(n^2)
issue for the server to build patches between every pair of versions.)
During the process of applying patches, portsnap prints lines of the
form "Skipping XXX-YYY (123 of 4567).\r", where the \r serves to allow
each of these (potentially many) lines to overwrite the previous one
on the console. Unfortunately, XXX and YYY here are SHA256 hashes,
resulting in these lines wrapping on reasonable-width consoles.
Replace the hashes with abbreviations of the form "0123...cdef"
(cutting 64 characters down to 11) in order to keep lines to a
reasonable length.
The rather ugly shell code here is used to avoid forking additional
processes; it would be much cleaner using sed(1), but in my testing
the sed-based alternative increases CPU time consumption by 50%.
Requested by: des
The UEFI driver included with Rocky Linux 8.4 uncovered an existing bug
in the NVMe emulation's construction of iovec's.
By default, NVMe data transfer operations use a scatter-gather list in
which all entries point to a fixed size memory region. For example, if
the Memory Page Size is 4KiB, a 2MiB IO requires 512 entries. Lists
themselves are also fixed size (default is 512 entries).
Because the list size is fixed, the last entry is special. If the IO
requires more than 512 entries, the last entry in the list contains the
address of the next list of entries. But if the IO requires exactly 512
entries, the last entry points to data.
The NVMe emulation missed this logic and unconditionally treated the
last entry as a pointer to the next list. Fix is to check if the
remaining data is greater than the page size before using the last entry
as a pointer to the next list.
PR: 256422
Reported by: dave@syix.com
Tested by: jason@tubnor.net
MFC after: 5 days
Relnotes: yes
Reviewed by: imp, grehan
Differential Revision: https://reviews.freebsd.org/D30897
After 34766aa8cb514472c571f8b0e90e833833acef51 we are mounting and
unmounting devfs elsewhere already.
Reviewed by: nwhitehorn
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D30877
While here only compile both of them if WITH_ISCSI is set (this is the default).
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D30755
Sponsored by: Diablotin Systems
And move all the nfs related commands there.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D30754
Sponsored by: Diablotin Systems
It can still be enabled as usual in /etc/periodic.conf
PR: 256253
Reported by: delphij
Submitted by: Miroslav Lachman <000.fbsd@quip.cz>
MFC after: 2 weeks
Old certctl commands still work for compatability, but are deprecated.
Approved by: secteam (gordon)
Differential Revision: https://reviews.freebsd.org/D30807
The "config" line in config files has been obsolete since FreeBSD 4.x
when we moved to having the boot loader pass in the root device. Remove
it.
MFC After: 1 week
Sponsored by: Netflix
When we introduced libpfctl in bnsmpd this was done incorrectly, and a
GETRULE call was replaced by pfctl_add_rule().
Change it to pfctl_get_rule().
Reviewed by: donner
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC ("Netgate")
Apparently some large-file systems out there, such as my powerpc64le
Linux box, define daddr_t as a 32-bit type, which is sad and stymies
cross-building disk images. Cast daddr_t to off_t before doing
arithmetic that overflows.
Reviewed by: arichardson, jrtc27, imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27458
Since 2d82b47 syslogd can't be built with `WITHOUT_INET` or
`WITHOUT_INET6` build variables set, because `iovlist_truncate` is not
defined but used.
This change wraps the problematic `iovlist_truncate` call within ifdef
directive. It's compiled out in this situation...
Pull Request: https://github.com/freebsd/freebsd-src/pull/475
Reviewed by: imp@ (commit message slightly tweaked)
Register a resize callback with the blockif interface. When the
callback fires, update the size of the disk and notify the guest via a
configuration change interrupt.
Reviewed by: grehan, markj
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D30506
This allows device models to assert VirtIO interrupts for reasons
other than publishing changes to a VirtIO ring such as configuration
changes.
Reviewed by: grehan, markj
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D30505
Allow clients of blockif to register a resize callback handler. When
a callback is registered, register an EVFILT_VNODE kevent watching the
backing store for a change in the file's attributes. If the size has
changed when the kevent fires, invoke the clients' callback.
Currently resize detection is limited to backing stores that support
EVFILT_VNODE kevents such as regular files.
Reviewed by: grehan, markj
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D30504
This allows registering an event to watch for changes to a file's
attributes. This is a bit imperfect as it would be nice to have a way
to determine if an fd can use EVFILT_VNODE successfully. mevent's
current structure does not permit that and a failure to register a
single kevent impacts several other kevents.
Reviewed by: grehan, markj
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D30503
Change mevent_add*() to synchronously add the new kevent. This
permits reporting event registration failures to the caller and avoids
failing the registration of other, unrelated events queued up in the
same batch.
Reviewed by: grehan, markj
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D30502
Last an(4) devices have been End Of Life and End Of Sale in 2007.
Time to remove this driver.
Differential Revision: https://reviews.freebsd.org/D30680
Reviewed by: imp (earlier version), emaste (earlier version)
Sponsored by: Diablotin Systems
This will be used to inject keyboard/mouse input events into a guest.
The command line syntax is:
-s <slot>,virtio-input,/dev/input/eventX
Reviewed by: jhb (bhyve), grehan
Obtained from: Corvin Köhne <C.Koehne@beckhoff.com>
MFC after: 3 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D30020
This check was too aggressive: it is fine if SizeOfHeaders is exactly
equal to the size of the DOS stub + PE header + section table. Despite
being wrong this code typically worked for most EFI binaries because
SizeOfHeaders is rounded up to a multiple of FileAlignment, which is
often large (e.g., 512 bytes for the FreeBSD loader) so most binaries
made it through.
Reviewed by: imp@
Sponsored by: Netflix
Pull Request: https://github.com/freebsd/freebsd-src/pull/445
Incorrectly linked built-in wpa functions resulted in overwriting
sm->ctx->set_rekey_offload with garbage. It was initialized correctly
however it changed after wpa_supplicant became a daemon.
No SIGBUS violations reported by dhw@ were experienced during testing
of the original commit by msyelf or philip@.
Reported by: dhw
Tested by: dhw
MFC after: 2 months
X-MFC with: 25ecdc7d52770caf1c9b44b5ec11f468f6b636f3
The default is to create a zroot that consumes the whole disk because if
used with geli(8) this makes sense.
Without geli(8), I like to keep my data pool separate from my system
pool.
This is different than ZFSBOOT_BOOT_POOL_SIZE which is named bootpool.
Reviewed by: allenjude
Pull Request: https://github.com/freebsd/freebsd-src/pull/53
Differential Revision: https://reviews.freebsd.org/D30588
Also improve temporary file usage in 200.accounting, add an xref to
zstd(1) to newsyslog.conf.5, and clarify in periodic.conf that
"daily accounting" means process accounting and "monthly accounting"
is login accounting.
PR: 253868
Reviewed by: allanjude
Approved by: blackend (mentor)
Differential Revision: https://reviews.freebsd.org/D29267
The pciconf command fails to emit newlines when particular ecap field
values are seen. Fix them up. This has been seen on several systems at
$JOB. The documentation for PCI capabilities says that capability
type 0 should not be used once the spec for PCI capabilities was
published, but that seems more wishful-thinking than reality. pciconf
also chooses not to print fields related to field values that are
zero, but it seems several of these fields are zero on actual
hardware.
Reviewed by: vangyzen, imp, Bret Ketchum (Bret.Ketchum@dell.com)
Sponsored by: Dell EMC Isilon
Submitted by: Robert Herndon (Robert.Herndon@dell.com)
Differential Revision: https://reviews.freebsd.org/D30441
This is a follow-up to 5fa29797910346fc0c54829bd979856e83b9b7ea .
PR: 256311
Reviewed by: imp
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D29867
The current WPA build assumes a flat namespace. However the latest sources
from w1.fi now have a duplicate config.c, in two separate subdirectories.
The flat namespace will overwrite config.o with the output from the most
recently modified config.c, of which there are two of them.
This commit resolves this problem by building each component in
wpa's src subdirectory tree into its own .a archive, just as the w1.fi
upstream build as used by the port does. The advantages of this approach
are:
1. Duplicate source file names, i.e. config.c in the wpa_supplicant
direcory and another config.c in src/utils in the next wpa
will result in both compiles writing to the same .o file.
2. This restructure simplifies maintanence. A develper needs only to add
new files as identified by git status in the vendor branch to the
appropriate Makefile within the usr.sbin/wpa tree. This also reduces
time required to prepare a new import and should reduce error.
3. The new wpa build structure more closely represents the build as
performed by the upstream tarball.
This is in preparation for the next wpa update from w1.fi.
Reviewed by: philip
Tested by: philip
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D30372
There is a single consumer, the pmc utility, that clearly has knowledge
of which counters it is expecting. Remove this function and have it
use common counter aliases instead.
Reviewed by: gnn
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D30528
Check if the pmu utils are supported rather than carrying a
machine-dependent #ifdef.
Reviewed by: gnn, ray, emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D30526
- Allow firmware downloading for hw_variant #8;
- Enter manufacturer mode for setting of event mask;
- Handle multi-event response on HCI commands for 7260;
This allows to remove kludge with skipping of 0xfc2f opcode.
- Disable patch and exit manufacturer mode on downloading failure;
- Use default firmware if correct firmware file is not found;
Reviewed by: Philippe Michaud-Boudreault <pitwuu_AT_gmail_DOT_com>
MFC after: 1 week
Tested by: arrowd
Differential revision: https://reviews.freebsd.org/D30543
The bsdinstall script target did not have the infrastructure to fetch
distfiles from a remote server the way the interactive installer does
on e.g. bootonly media. Solve this by factoring out the parts of the
installer that deal with fetching missing distributions into a new
install stage called 'fetchmissingdists', which is called by both the
interactive and scripted installer frontends.
In the course of these changes, cleaned up a few other issues with
the fetching of missing distribution files and added a warning if
fetching the MANIFEST file, which is used to verify the integrity of
the distribution files. We should at some point add cryptographic
signatures to MANIFEST so that it can be fetched safely if not present
on the install media (which it is for bootonly media).
Initial patch by: Vinícius Zavam
PR: 255659, 250928
Reviewed by: dteske
MFC after: 4 weeks
Differential Revision: https://reviews.freebsd.org/D27121
Move initialization of the mutex/condition variables required by the
save/restore feature to their own function.
The unix domain socket that facilitates communication between bhyvectl
and bhyve doesn't rely on these variables in order to be functional.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D30281
