a power saving mode otherwise.
- If the thread is already bound in sched_bind() unbind it before
re-binding it to a new cpu. I don't like these semantics but they are
expected by some code in the tree. Patch by jkoshy.
Dont expose em->shared to the outside world before its properly
initialized. Might not affect anything but its at least a better
coding style.
Dont expose em via p->p_emuldata until its properly initialized.
This also enables us to get rid of some locking and simplify the
code because we are workin on a local copy.
In linux_fork and linux_vfork create the process in stopped state
to be sure that the new process runs with fully initialized emuldata
structure [1]. Also fix the vfork (both in linux_clone and linux_vfork)
race that could result in never woken up process [2].
Reported by: Scot Hetzel [1]
Suggested by: jhb [2]
Reviewed by: jhb (at least some important parts)
Submitted by: rdivacky
Tested by: Scot Hetzel (on amd64)
Change 2 comments (in the new code) to comply to style(9).
Suggested by: jhb
work when we start requiring this.
- Don't specify an alignment when creating our own parent DMA tag;
the supported DMA engines require no alignment constraint (f.e. the
LANCE child does though) and it's no inherited by the child DMA
tags anyway (which probably is a bug though).
- Fix whitespace nits.
These are shared-memory variants based on Am79C90-compatible chips
that apart from the missing DMA engine are similar to the 'ledma'
variant including using a (pseudo-)bus/device for the buffer that
the actual LANCE device hangs off from. The performance of these is
close to that of the 'ledma' one, like expected at a few times the
CPU load though.
1) Do not do quota accounting for the actual quota data files
or for file system snapshot files ("system" files). This
prevents a deadlock descibed in PR kern/30958 if the kernel
ever has to grow the quota file. Snapshot files were already
exempt from the quota checks, but this change generalized the check.
2) Fix a cast that caused extremely large uids/gids to incorrectly
write the quota information to the data file at a truncated
value for a uint_t32 id value. The incorrect cast caused quota
files in this case to be around 4GB in size, with the correct cast
they can now be 131GB in size. Also related to PR kern/30958.
3) Check for what appear to be negative UIDs/GIDs and not account
for them. This prevents the quota files from becoming 131GB in
size and causing quotacheck to run forever at bootup. This could
also cause the kernel to try and expand the quota file, which might
deadlock due to the issue in #1. kern/30958 and kern/38156
(and some much older closed PR's).
4) With the deadlock problems gone, the kernel can now expand the
size of the quota database files if it needs to.
5) Pass in the i-node count change value to chkiq and chkiqchg as an
int, like it used to be before the common routine was split up
into 2 different routines to increase / decrease the i-node in-use
count. Prevents an underflow on the i-node count. Related
to PR kern/89247.
6) Prevent the block usage from growing slowly if a file system is
full and the write was denied due to that fact. PR kern/89247.
Some of these changes require an updated quotacheck to prevent
the creation of huge (131GB) quota data files (item #3).
#1/#4 probably fixes a lot of the random hangs when quotas are enabled,
possibly some of the jail hangs.
unlike documented may not take effect without an initialization. So
don't invoke (*sc_mediachange) directly in lance_mediachange() but
go through lance_init_locked(). It's suboptimal to impose this for
all chips but given that besides the affected PCI bus front-end the
only other front-end which supports media selection is and likely
ever will be the 'ledma' front-end I see not enough reason to break
the in-driver API for this (though one could argue both ways here).
the ipi settings. If NEEDRESCHED is set and an ipi is later delivered
it will clear it rather than cause extra context switches. However, if
we miss setting it we can have terrible latency.
- In sched_bind() correctly implement bind. Also be slightly more
tolerant of code which calls bind multiple times. However, we don't
change binding if another call is made with a different cpu. This
does not presently work with hwpmc which I believe should be changed.
front of isp_init so we can read NVRAM even if we're role ISP_NONE.
Prepare for reintroduction of channels (for FC) for N-Port
Virtualization.
Fix a botch in handle assignment that caused us to nuke one device
when a new one arrives and end up with two devices with the same
identity in the virtual target mapping table.
ifmedia_init() invocation. IFM_IMASK makes only sense here when all of
the maxium of 32 PHYs on each one MII bus support disjoint sets of media,
which generally isn't the case (though it would be nice if we had a way
to let NIC drivers indicate that for the few card models where the PHY
configuration is known/fixed and IFM_IMASK actually makes sense).
- Add and use a miibus_print_child() for the bus_print_child method which
additionally prints the PHY number (which actually is the PHY address)
so one can figure out the media instance <-> PHY number mapping from the
PHY driver attach output. This is intented to be usefull in situations
where the addresses of the PHYs on the bus are known (f.e. of internal/
integrated PHYs) so one can feed the appropriate media instance number
to ifconfig(8) (with the upcoming change for ifconfig(8)).
This is more or less inspired by the NetBSD mii_print().
multiple PHYs. In case some PHYs currently driven by ukphy(4) exhibit
problems when isolating due to incomplete implementations or silicon bugs
we'll need to add specific drivers for these. Looking at NetBSD and
OpenBSD I don't expect problems here though (quite the contrary; we still
seem to set MIIF_NOISOLATE without good reason in a bunch of PHY drivers).
- Fix a style(9) whitespace nit.
capability rather than hardcoded offsets for a particular card. While
I'm here, expand the constants some.
- Change the ahd(4) driver to use pci_find_extcap() to locate the PCI-X
capability to keep up with the first change.
Reviewed by: scottl, gibbs (earlier version)
- Switch back to direct modification of remote CPU run queues. This added
a lot of complexity with questionable gain. It's easy enough to
reimplement if it's shown to help on huge machines.
- Re-implement the old tdq_transfer() call as tdq_pickidle(). Change
sched_add() so we have selectable cpu choosers and simplify the logic
a bit here.
- Implement tdq_pickpri() as the new default cpu chooser. This algorithm
is similar to Solaris in that it tries to always run the threads with
the best priorities. It is actually slightly more complex than
solaris's algorithm because we also tend to favor the local cpu over
other cpus which has a boost in latency but also potentially enables
cache sharing between the waking thread and the woken thread.
- Add a bunch of tunables that can be used to measure effects of different
load balancing strategies. Most of these will go away once the
algorithm is more definite.
- Add a new mechanism to steal threads from busy cpus when we idle. This
is enabled with kern.sched.steal_busy and kern.sched.busy_thresh. The
threshold is the required length of a tdq's run queue before another
cpu will be able to steal runnable threads. This prevents most queue
imbalances that contribute the long latencies.
headers in .S directly rather than getting to their macros through
genassym.c/assym.s so there are less headers genassym.c has to be
kept in sync with.
While at it fix some stytle(9) bugs (indentation, prototype format,
sort headers, etc) and remove trailing whitespace.
that can be used to check whether receive data is ready, i.e. whether
the subsequent call of uart_poll() should return a char, and unlike
uart_poll() doesn't actually receive data.
- Remove the device-specific implementations of uart_poll() and implement
uart_poll() in terms of uart_getc() and the newly added uart_rxready()
in order to minimize code duplication.
- In sunkbd(4) take advantage of uart_rxready() and use it to implement
the polled mode part of sunkbd_check() so we don't need to buffer a
potentially read char in the softc.
- Fix some mis-indentation in sunkbd_read_char().
Discussed with: marcel
may also reflect a Fireplane/Safari or JBus bus (or a virtual bus which
in turn reflects a JBus bus or something like that...).
- In the both the sparc64 and sun4v bus_machdep.c use __FBSDID.
- Spell SBus the official way in comments.
- Replace hardcoded function names (all of which were actually outdated)
in panic and status strings with __func__.
- Fix whitespace nits.
hooks get their per hook rcvdata methods, and all functions are organized
corresponding to protocol stack model.
Submitted by: Alexander Motin <mav alkar.net>
Reviewed by: archie, julian
and friends along with all hacks required to implement them. None of
the drivers currently built (as part of GENERIC, LINT or modules) on
sparc64 or sun4v and none of those we might want to use there in
future uses them, AFAICT there actually never was a driver hooked up
to the sparc64 or sun4v build that correctly used these functions
(and it looks like that due to a bug read{b,w,l}()/write{b,w,l}() and
the other functions working on a memory handle never actually worked on
sun4v). All they ever were good for on sparc64 and sun4v was erroneously
dragging in dependencies on isa(4) in drivers like f.e. dpt(4), si(4)
and syscons(4) in source files that supposedly were bus-neutral and
hiding issues with drivers like f.e. ng_bt3c(4) that used these
functions with busses other than isa(4) and therefore couldn't work on
these platforms.
the newly added DEV_EISA. This is done so that these back-ends can
be compiled on platforms not providing in{b,w,l}()/out{b,w,l}() and
friends (but may wish to use them together with bus front-ends other
than the EISA one).
- Finally all splxx() are removed
- Count error fixed in mapping array which might
cause a wrong cumack generation.
- Invariants around panic for case D + printf when no invariants.
- one-to-one model race condition fixed by using
a pre-formed connection and then completing the
work so accept won't happen on a non-formed
association.
- Some additional paranoia checks in sctp_output.
- Locks that were missing in the accept code.
Approved by: gnn
to open() [1].
Improve locking for accessing session control structures [2].
Try to document (most likely harmless) races in the code [3].
Based on submission by: Intron (intron at intron ac) [1]
Reviewed by: jhb [2]
Discussed with: netchild, rwatson, jhb [3]
total size of all input reports is < 6.
PR: usb/106435
Submitted by: Eygene Ryabinkin <rea-fbsd@codelabs.ru>
Approved by: emax (mentor)
MFC after: 3 days
PCI bus' one as the default one, and explicitely use the other one for
non-PCI devices.
This is needed because the PCI bus can only address 64MB of RAM, while some
IXP425 boards have 128MB or more, and most of the PCI drivers do not bother
providing the parent dma tag.
- Add a default parent dma tag, similar to what has been done for sparc64.
- Before invalidating the dcache in POSTREAD, save the bits which are in the
same cachelines than our buffers, but not part of it, and restore them after
the invalidation.
from just before extending a file. This has the desired effect
of keeping the write speed constant. And yes, that helps a lot
copying large files always at full speed now, and I have seen
improvements using benchmarks/bonnie.
Stolen from: NetBSD
Reviewed by: bde
bus hanging off from the Fireplane/Safari bus in some USIII machines.
This is part 3/4 of allowing creator(4) to work in these machines.
The little info needed on how to configure the bridge and to work
around the incorrect values contained in the `interrupts' properties
of its children were obtained form OpenSolaris.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
nexus (which might or might not reflect an UPA interconnection bus;
accordingly UPA_BUS_SPACE should be renamed to NEXUS_BUS_SPACE at a
later point) and subordinate/slave UPA busses. This is part 1/4 of
allowing creator(4) to work in USIII machines (which have a UPA bus
hanging off from the Fireplane/Safari bus reflected by the nexus).
operation as it ran out of free descriptors or if there are too many
segments in the first place, call bus_dmamap_unload() in order to
unload the already loaded segments.
For trying to map the defragmented mbuf (chain) in re_encap() this
introduces re_dma_map_desc() setting arg.rl_maxsegs to 0 as a new
failure mode. Previously we just ignored this case, corrupting our
view of the TX ring.
o In re_txeof():
- Don't clear IFF_DRV_OACTIVE unless there are at least 4 free TX
descriptors. Further down the road re_encap() will bail if there
aren't at least 4 free TX descriptors, causing re_start() to
abort and prepend the dequeued mbuf again so it makes no sense
to pretend we could process mbufs again when in fact we won't.
While at it replace this magic 4 with a macro RL_TX_DESC_THLD
throughout this driver.
- Don't cancel the watchdog timeout as soon as there's at least one
free TX descriptor but instead only if all descriptors have been
handled. It's perfectly normal, especially in the DEVICE_POLLING
case, that re_txeof() is called when only a part of the enqueued
TX descriptors have been handled, causing the watchdog to be
disarmed prematurely.
o In re_encap():
- If m_defrag() fails just drop the packet like other NIC drivers
do. This should only happen when there's a mbuf shortage, in which
case it was possible to end up with an IFQ full of packets which
couldn't be processed as they couldn't be defragmented as they
were taking up all the mbufs themselves. This includes adjusting
re_start() to not trying to prepend the mbuf (chain) if re_encap()
has freed it.
- Remove dupe initialization of members of struct rl_dmaload_arg to
values that didn't change since trying to process the fragmented
mbuf chain.
While at it remove an unused member from struct rl_dmaload_arg.
o In re_start() remove a abandoned, banal comment. The corresponding
code was moved to re_attach() some time ago.
With these changes re(4) now survives one day (until stopped) of
hammering out packets here.
Reviewed by: yongari
MFC after: 2 weeks
- Retire the PCI_SUB*_1 constants and don't try to read a subvendor ID out
of them. There isn't a standard subvendor ID field for PCI-PCI bridges.
Instead, the dword at offset 0x34 is actually mostly reserved except for
the LSB which is the capabilities pointer.
- Add support for the PCI-PCI bridge subvendor ID capability (13) and use
it to set the subvendor ID for PCI-PCI bridges.
MFC after: 1 month
functions. The idea is taken from OpenBSD.
- Set/clear jumbo frame configurations for bge(4).
- Re-add BCM5750 PHY workaround for bce(4), which was mistakenly removed
from the previous commit.
- Move some PHY bug detections from brgphy.c to if_bge.c.
- Do not penalize working PHYs.
- Re-arrange bge_flags roughly by their categories.
- Fix minor style(9) nits.
PR: kern/107257
Obtained from: OpenBSD
Tested by: Mike Hibler <mike at flux dot utah dot edu>
The code is modelled after cd9660, including support for simple read-ahead
courtesy of clustered read.
Fix udf_strategy to DTRT.
This change fixes sendfile(2) not to send out garbage.
Reviewed by: scottl
MFC after: 1 month
- Added a short time wait (not used yet) constant
- Corrected the type of the crc32c table (it was
unsigned long and really is a uint32_t
- Got rid of the user of MHeaders until they
are truely needed by lower layers.
- Fixed an initialization problem in the readq structure
(ordering was off).
- Found yet another collision bug when the random number
generator returns two numbers on one side (during a collision)
that are the same. Also added some tracking of cookies
that will go away when we know that we have the last collision
bug gone.
- Fixed an init bug for book_size_scale, that was causing
Early FR code to run when it should not.
- Fixed a flight size tracking bug that was associated with
Early FR but due to above bug also effected all FR's
- Fixed it so Max Burst also will apply to Fast Retransmit.
- Fixed a bug in the temporary logging code that allowed a
static log array overflow
- hashinit_flags is now used.
- Two last mcopym's were converted to the macro sctp_m_copym that
has always been used by all other places
- macro sctp_m_copym was converted to upper case.
- We now validate sinfo_flags on input (we did not before).
- Fixed a bug that prevented a user from sending data and immediately
shuting down with one send operation.
- Moved to use hashdestroy instead of free() in our macros.
- Fixed an init problem in our timed_wait vtag where we
did not fully initialize our time-wait blocks.
- Timer stops were re-positioned.
- A pcb cleanup method was added, however this probably will
not be used in BSD.. unless we make module loadable protocols
- I think this fixes the mysterious timer bug.. it was a
ordering of locks problem in the way we did timers. It
now conforms to the timeout(9) manual (except for the
_drain part, we had to do this a different way due
to locks).
- Fixed error return code so we get either CONNREUSED or CONNRESET
depending on where one is in progression
- Purged an unused clone macro.
- Fixed a read erro code issue where we were NOT getting the proper
error when the connection was reset.
- Purged an unused clone macro.
- Fixed a read erro code issue where we were NOT getting the proper
error when the connection was reset.
Approved by: gnn
Approved by: gnn
Add a new function hashinit_flags() which allows NOT-waiting
for memory (or waiting). The old hashinit() function now
calls hashinit_flags(..., HASH_WAITOK);
o eliminate assumptions that half/quarter rate channels on exist in 11a
o handle frequency mapping between hal and net80211; hal gives us freq's
in the range 2422..2437 that we remap
MFC after: 1 month
o add channel flag to enable freq <-> ieee channel # mapping (can
go away in the future when ieee number is precomputed)
o add mapping between 900mhz freq's and channel #'s that gives a
unique channel # for each half/quarter/full width channel
o remove assumptions that half/quarter rate channels on happen in 11a
o remove assumptions that all 11g channels are full width
o ensure ic_curchan is reset on mode change so changing the channel
list (e.g. on countrycode change) doesn't leave curchan set to an
invalid channel
There is still an issue with switching rate sets; to be fixed separately.
MFC after: 1 month
only support external PHYs (besides not connectable internal ones
which respond at the usual addresses, but which don't hurt if we
let them show up) and don't wedge when isolating PHYs. Actually,
this change special cases limiting PHYs to Am79C97{3,5,8}, for
which this driver doesn't implement swiching between the internal
and external PHYs, yet, and Am79C971, where isolating the external
PHY (at least in case it's a DP83840A) wedges the chip. Together
with sys/dev/mii/acphy.c rev. 1.21 this adds support for the
100baseFX port of AT-2700 series adaptors, which use two AC101,
one for the copper and one for the fibre port (there might be
variants which only use one PHY though).
- Fix a bug in the previous revision that prevented the address of
the used (external) PHY to be actually recorded.
- Don't bother to set if_mtu to ETHERMTU, ether_ifattach() does that.
MFC after: 1 week
bridge if it doesn't pass MSI messages up correctly. We set the flag
in pcib_attach() if the device ID is disabled via a PCI quirk.
- Disable MSI for devices behind the AMD 8131 HT-PCIX bridge. Linux has
the same quirk.
Tested by: no one despite repeated calls for testers
laptops.
Tested by: [1] Lion G. <liontanker@hotmail.com>
[2] Pietro Cerutti <pietro.cerutti@gmail.com>
Specialized mixer initialization for STAC9221, much like STAC9220.
Tested by: Devon H. O'Dell
- Set MIIF_NOLOOP as loopback doesn't work with this PHY. The MIIF_NOLOOP
flag currently triggers nothing but hopefully will be respected by
mii_phy_setmedia() later on.
- Use MII_ANEGTICKS instead of 5.
- Remove an unused macro.
- Fix some whitespace nits.
MFC after: 1 week
- In exphy_service() for the MII_TICK case don't bother to check whether
the currently selected media is of type IFM_AUTO as auto-negotiation
doesn't need to be kicked anyway.
- Remove #if 0'ed unapplicable code.
- Fix some whitespace nits.
MFC after: 1 week
and thus the FX_DIS pin indicates fibre media. This is part 1/2 of
adding support for the 100baseFX interface/port of AT-2700 series
adaptors.
Idea from: NetBSD
MFC after: 1 week
indices when manually adding media. Some of these I've missed while
converting drivers to take advantage of said fuctions recently,
others where longstanding bugs.
- General style(9) cleanup -- white space, braces, line wraps, etc.
- Annotate a lack of synchronization the global route cache if the input
routine is invoked with parallelism.
- Remove unused debugging code.
