to avoid ABI changes. It is set to the last time the interface
counters were zeroed, currently the time if_attach() was called. It is
intentended to be a valid value for RFC2233's ifCounterDiscontinuityTime
and to make it easier for applications to verify that the interface they
find at a given index is the one that was there last time they looked.
Due to space constraints ifi_epoch is a time_t rather then a struct
timeval. SNMP would prefer higher precision, but this unlikely to be
useful in practice.
happens when a proc exits, but needs to inform the user that this has
happened.. This also means we can remove the check for detached from
proc and sig f_detach functions as this is doing in kqueue now...
MFC after: 5 days
have been in place all the time the mtx_assert in the ALTQ code just
discovered the shortcoming.
PR: i386/71195
Tested by: Bettan (PR originator), myself
MFC after: 5 days
increasing it. Add code to ifconfig to use this size to find the
sockaddr_dl after the struct if_data in the routing message. This
allows struct if_data to grow (up to 255 bytes) without breaking
ifconfig.
Submitted by: peter
time the interface counters were zeroed, currently the time if_attach()
was called. It is indentended to be a valid value for RFC2233's
ifCounterDiscontinuityTime and to make it easier for applications to
verify that the interface they find at a given index is the one that was
there last time they looked.
An if_epoch "compatability" macro has not been created as ifi_epoch has
never been a member of struct ifnet.
Approved by: andre, bms, wollman
so that it becomes happy and no longer panics the system
upon getting the very first packet to transmit.
Reported and tested by: Igor Timkin <ivt@gamma.ru>
Reviewed by: rwatson
MFC after: 5 days
will cause the network stack to operate without the Giant lock by
default. This change has the potential to improve performance by
increasing parallelism and decreasing latency in network processing.
Due to the potential exposure of existing or new bugs, the following
compatibility functionality is maintained:
- It is still possible to disable Giant-free operation by setting
debug.mpsafenet to 0 in loader.conf.
- Add "options NET_WITH_GIANT", which will restore the default value of
debug.mpsafenet to 0, and is intended for use on systems compiled with
known unsafe components, or where a more conservative configuration is
desired.
- Add a new declaration, NET_NEEDS_GIANT("componentname"), which permits
kernel components to declare dependence on Giant over the network
stack. If the declaration is made by a preloaded module or a compiled
in component, the disposition of debug.mpsafenet will be set to 0 and
a warning concerning performance degraded operation printed to the
console. If it is declared by a loadable kernel module after boot, a
warning is displayed but the disposition cannot be changed. This is
implemented by defining a new SYSINIT() value, SI_SUB_SETTINGS, which
is intended for the processing of configuration choices after tunables
are read in and the console is available to generate errors, but
before much else gets going.
This compatibility behavior will go away when we've finished the last
of the locking work and are confident that operation is correct.
its users.
netisr_queue() now returns (0) on success and ERRNO on failure. At the
moment ENXIO (netisr queue not functional) and ENOBUFS (netisr queue full)
are supported.
Previously it would return (1) on success but the return value of IF_HANDOFF()
was interpreted wrongly and (0) was actually returned on success. Due to this
schednetisr() was never called to kick the scheduling of the isr. However this
was masked by other normal packets coming through netisr_dispatch() causing the
dequeueing of waiting packets.
PR: kern/70988
Found by: MOROHOSHI Akihiko <moro@remus.dti.ne.jp>
MFC after: 3 days
compile option. All FreeBSD packet filters now use the PFIL_HOOKS API and
thus it becomes a standard part of the network stack.
If no hooks are connected the entire packet filter hooks section and related
activities are jumped over. This removes any performance impact if no hooks
are active.
Both OpenBSD and DragonFlyBSD have integrated PFIL_HOOKS permanently as well.
date: 2004/08/22 14:48:55; author: rwatson; state: Exp; lines: +0 -2
Don't need to assert Giant in fw_output(), only in the firewire start
routine.
Approved by: re (scottl)
the tunable or sysctl 'net.route.netisr_maxqlen'. Default the maximum
depth to 256 rather than IFQ_MAXLEN due to the downsides of dropping
routing messages.
MT5 candidate.
Discussed with: mdodd, mlaier, Vincent Jardin <jardin at 6wind.com>
security.jail.allow_raw_sockets sysctl MIB is set to 1) where privileged
access to jails is given out, it is possible for prison root to manipulate
various network parameters which effect the host environment. This commit
plugs a number of security holes associated with the use of raw sockets
and prisons.
This commit makes the following changes:
- Add a comment to rtioctl warning developers that if they add
any ioctl commands, they should use super-user checks where necessary,
as it is possible for PRISON root to make it this far in execution.
- Add super-user checks for the execution of the SIOCGETVIFCNT
and SIOCGETSGCNT IP multicast ioctl commands.
- Add a super-user check to rip_ctloutput(). If the calling cred
is PRISON root, make sure the socket option name is IP_HDRINCL,
otherwise deny the request.
Although this patch corrects a number of security problems associated
with raw sockets and prisons, the warning in jail(8) should still
apply, and by default we should keep the default value of
security.jail.allow_raw_sockets MIB to 0 (or disabled) until
we are certain that we have tracked down all the problems.
Looking forward, we will probably want to eliminate the
references to curthread.
This may be a MFC candidate for RELENG_5.
Reviewed by: rwatson
Approved by: bmilekic (mentor)
and preserves the ipfw ABI. The ipfw core packet inspection and filtering
functions have not been changed, only how ipfw is invoked is different.
However there are many changes how ipfw is and its add-on's are handled:
In general ipfw is now called through the PFIL_HOOKS and most associated
magic, that was in ip_input() or ip_output() previously, is now done in
ipfw_check_[in|out]() in the ipfw PFIL handler.
IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to
be diverted is checked if it is fragmented, if yes, ip_reass() gets in for
reassembly. If not, or all fragments arrived and the packet is complete,
divert_packet is called directly. For 'tee' no reassembly attempt is made
and a copy of the packet is sent to the divert socket unmodified. The
original packet continues its way through ip_input/output().
ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet
with the new destination sockaddr_in. A check if the new destination is a
local IP address is made and the m_flags are set appropriately. ip_input()
and ip_output() have some more work to do here. For ip_input() the m_flags
are checked and a packet for us is directly sent to the 'ours' section for
further processing. Destination changes on the input path are only tagged
and the 'srcrt' flag to ip_forward() is set to disable destination checks
and ICMP replies at this stage. The tag is going to be handled on output.
ip_output() again checks for m_flags and the 'ours' tag. If found, the
packet will be dropped back to the IP netisr where it is going to be picked
up by ip_input() again and the directly sent to the 'ours' section. When
only the destination changes, the route's 'dst' is overwritten with the
new destination from the forward m_tag. Then it jumps back at the route
lookup again and skips the firewall check because it has been marked with
M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with
'option IPFIREWALL_FORWARD' to enable it.
DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for
a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will
then inject it back into ip_input/ip_output() after it has served its time.
Dummynet packets are tagged and will continue from the next rule when they
hit the ipfw PFIL handlers again after re-injection.
BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as
they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS.
More detailed changes to the code:
conf/files
Add netinet/ip_fw_pfil.c.
conf/options
Add IPFIREWALL_FORWARD option.
modules/ipfw/Makefile
Add ip_fw_pfil.c.
net/bridge.c
Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw
is still directly invoked to handle layer2 headers and packets would
get a double ipfw when run through PFIL_HOOKS as well.
netinet/ip_divert.c
Removed divert_clone() function. It is no longer used.
netinet/ip_dummynet.[ch]
Neither the route 'ro' nor the destination 'dst' need to be stored
while in dummynet transit. Structure members and associated macros
are removed.
netinet/ip_fastfwd.c
Removed all direct ipfw handling code and replace it with the new
'ipfw forward' handling code.
netinet/ip_fw.h
Removed 'ro' and 'dst' from struct ip_fw_args.
netinet/ip_fw2.c
(Re)moved some global variables and the module handling.
netinet/ip_fw_pfil.c
New file containing the ipfw PFIL handlers and module initialization.
netinet/ip_input.c
Removed all direct ipfw handling code and replace it with the new
'ipfw forward' handling code. ip_forward() does not longer require
the 'next_hop' struct sockaddr_in argument. Disable early checks
if 'srcrt' is set.
netinet/ip_output.c
Removed all direct ipfw handling code and replace it with the new
'ipfw forward' handling code.
netinet/ip_var.h
Add ip_reass() as general function. (Used from ipfw PFIL handlers
for IPDIVERT.)
netinet/raw_ip.c
Directly check if ipfw and dummynet control pointers are active.
netinet/tcp_input.c
Rework the 'ipfw forward' to local code to work with the new way of
forward tags.
netinet/tcp_sack.c
Remove include 'opt_ipfw.h' which is not needed here.
sys/mbuf.h
Remove m_claim_next() macro which was exclusively for ipfw 'forward'
and is no longer needed.
Approved by: re (scottl)
a more complete subsystem, and removes the knowlege of how things are
implemented from the drivers. Include locking around filter ops, so a
module like aio will know when not to be unloaded if there are outstanding
knotes using it's filter ops.
Currently, it uses the MTX_DUPOK even though it is not always safe to
aquire duplicate locks. Witness currently doesn't support the ability
to discover if a dup lock is ok (in some cases).
Reviewed by: green, rwatson (both earlier versions)
called "rtentry".
This saves a considerable amount of kernel memory. R_Zmalloc previously
used 256 byte blocks (plus kmalloc overhead) whereas UMA only needs 132
bytes.
Idea from: OpenBSD
before grabbing BPF locks to see if there are any entries in order to
avoid the cost of locking if there aren't any. Avoids a mutex lock/
unlock for each packet received if there are no BPF listeners.
device drivers to declare that the ifp->if_start() method implemented
by the driver requires Giant in order to operate correctly.
Add a 'struct task' to 'struct ifnet' that can be used to execute a
deferred ifp->if_start() in the event that if_start needs to be called
in a Giant-free environment. To do this, introduce if_start(), a
wrapper function for ifp->if_start(). If the interface can run MPSAFE,
it directly dispatches into the interface start routine. If it can't
run MPSAFE, we're running with debug.mpsafenet != 0, and Giant isn't
currently held, the task is queued to execute in a swi holding Giant
via if_start_deferred().
Modify if_handoff() to use if_start() instead of direct dispatch.
Modify 802.11 to use if_start() instead of direct dispatch.
This is intended to provide increased compatibility for non-MPSAFE
network device drivers in the presence of Giant-free operation via
asynchronous dispatch. However, this commit does not mark any network
interfaces as IFF_NEEDSGIANT.
Now it is user-controlled through ifconfig(8).
The former ``automagic'' way of operation created more
trouble than good. First, VLAN_MTU consumers other than
vlan(4) had appeared, e.g., ng_vlan(4). Second, there was
no way to disable VLAN_MTU manually if it were causing
trouble, e.g., data corruption.
Dropping the ``automagic'' should be completely invisible
to the user since
a) all the drivers supporting VLAN_MTU
have it enabled by default, and in the first place
b) there is only one driver that can really toggle VLAN_MTU
in the hardware under its control (it's fxp(4), to which
I added VLAN_MTU controls to illustrate the principle.)
future:
rename ttyopen() -> tty_open() and ttyclose() -> tty_close().
We need the ttyopen() and ttyclose() for the new generic cdevsw
functions for tty devices in order to have consistent naming.
for unknown events.
A number of modules return EINVAL in this instance, and I have left
those alone for now and instead taught MOD_QUIESCE to accept this
as "didn't do anything".
