be). Using that string leads rc.network to execute:
# sysctl -w vfs.nfs.bufpackets=DEFAULT
vfs.nfs.bufpackets: 4 -> 0
Which isn't what was intended.
PR: conf/31280
MFC after: 3 days
name of the device that it creates. Update /etc/ttys accordingly.
An alias is created for the old name so that old /etc/ttys will continue to
work, but due to aliases being implemented as symlinks in devfs you cannot
login as root when using the alias device.
Discussed with: grehan
withough the $natd_interface having to be explicitly specified on the
command line.
Approved by: markm (mentor)
Submitted by: Aaron D. Gifford <agifford@infowest.com>
PR: conf/47024
MFC: upon re approval
named(8) daemon by providing a new rc.conf knob: named_pidfile
that defaults to the path specified in the system-installed named.conf(5).
Approved by: markm (mentor)
Reviewed by: dougb
Noticed by : Galen Sampson <galen_sampson@yahoo.com>
Dan Pelleg <daniel+bsd@pelleg.org>
PR: conf/46402
MFC: 2 weeks (with re@ approval)
to /dev/raidctl, don't set the group to operator. (This isn't a
storage device, it's a control device).
Also, since umask here is already restrictive, we don't need to
explicitly set the mode.
Submitted by: bde
Instead, load them as part of the rc.d system. This allows us to prioritize
the initidiskless script so it runs before the configuration files are loaded
and allows us to get rid of the exit 2 hack in /etc/rc. The exit 2 never
worked anyway since it did not unset the prior configuration, causing the
diskless code to not operate properly.
Do a major cleanup and revamping of the diskless code for RCNG. This will
be backported to the non-RCNG scripts as well as -stable.
With suggestions from: Mike Makonnen <mtm@identd.net>
MFC after: 7 days
the whole thing generic. That is, /conf/base, /conf/default,
/conf/${ipba}, and /conf/${ip} are all handled the same way.
Introduce an NFS remounting feature via the /conf/base/<dir>/diskless_remount
so you can avoid dup'ing system directories in /conf (described in rc file).
Introduce a memory filesystem sizing feature via the /conf/base/<dir>/md_size
file that allows you to override the default memory filesystem size.
Introduce a file containing relative paths to remove for each memory filesystem
directory as /conf/base/<dirname>.remove.
Make the cpio feature more generic (applies to any filesystem) (aka
/conf/base/<dirname>.cpio.gz).
Allow any root directories to be created as a memory filesystem via the
/conf/*/* mechanism.
Replace the copyright notice with a reference to the COPYRIGHT file and
do other cleanups.
(documentation and man page updates to follow).
MFC after: 3 days
background fsck. The delay defaults to sixty seconds to allow
large applications such as the X server to start before disk I/O
bandwidth is monopolized by fsck.
Submitted by: Brooks Davis <brooks@one-eyed-alien.net>
Sponsored by: DARPA & NAI Labs.
from "unix" back to "local". Add some compat stuff so both
ways work for some time.
Reviewed by: phk
Approved by: imp (UPDATING)
Requested by: iedowse, lukem@netbsd.org
that's being replaced here. This is what /etc/rc does now.
There is no NetBSD devfs, so there is no compatibility issue.
Not objected to by: FreeBSD-rc@yahoogroups.com
Approved by: re (murray)
where people want to have the cards configured. Lack of -z is a speed
optimization.
Submitted by: many voices on mobile@
Approved by: re@ (rwatson)
MFC after: 3 days
Fix a minor grammer nit.
Get rid of _echo that uses logger and just call logger in the 3 routines
that need it.
Add a comment referencing rc.conf(5) in the case of an incorrectly set
variable.
This pulls rc.subr up to 1.51 of rc.subr. I skipped 1.49 (systrace support)
since I don't have systrace.
Obtained from: NetBSD
to specify rules definition file for ipfilter. The default is
/etc/ipf6.rules. If there is a file which is specified by
'ipv6_ipfilter_rules', IPv6 rule is installed.
Reviewed by: Ronald van der Pol <Ronald.vanderPol@rvdp.org>
MFC after: 1 week
an entry in /etc/sysctl.conf didn't exist. Fixing this exposed a minor
typo "exits" vs. "exist".
However, there doesn't appear to be any provision to run this with
the "lastload" argument, meaning that the error will never appear.
whatever random value was already in $unit. It happened to work
because the variable is often unset, but this is not always the
case e.g. when you call "MAKEDEV sio2 usb ..."
This affects -stable as well.
Reviewed by: n_hibma
Silence from: re
MFC after: 3 days
# or any login.conf resource limits or features; use it only if this is
# appropriate for your environment. If you require these features, use
# the regular FreeBSD ftpd below.
Discourage users from using lukemftpd if they rely any of these standard
FreeBSD features that are fully supported by our native ftpd. There
may be other features that are not yet supported that I have not yet
discovered.
tells applications to print labels for all of the TrustedBSD-
generated policies, if they are present.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
the wheel group has no explicit members listed in /etc/group. This adds
the "exempt_if_empty" flag to pam_wheel in the default configuration;
in some environments, it may be appropriate to remove this flag, however,
this default is the same as pre-pam_wheel.
Reviewed by: markm
Sponsored by: DARPA, Network Associates Laboratories
configuration. Root privileges override DAC on local file systems and
therefore root does not generally need to be a member of a group to
access files owned by that group. In the NFS case, require explicit
authorization for root to have these privileges.
Leave root in operator for dump/restore broadcast reasons; leave root
in wheel until discrepencies in the "no users in wheel means any user
can su" policy are resolved (possibly indefinitely).
* Space -> tabs conversion.
* Removed blanks before semicolon in "if ... ; then".
* Proper indentation of misindented lines.
* Put a full stop after some comments.
* Removed whitespace at end of line.
Approved by: silence from gordon
script did. Stuff in rc.local frequently has lines like
"echo -n ' service_name'" which look ugly without a prefix and a
trailing period. Likewise for rc.shutdown.local for consistency.
and atime only, but also the ctime. Otherwise, files extracted from
tar or zip archives will immediately be declared stale since they've
got their mtime reset to the original mtime.
Reviewed by: brian
MFC after: 1 week
a per-machine or per-cluster (with different ways of expressing what's
part of a cluster) basis. In order for this to be effective, rc.conf
has to be reread after initdiskless is finished. Implement this by
adding a hook to etc/rc which rereads rc.conf by request. This can
also be implemented by renaming initdiskless to initdiskless.sh and
sourcing rc.conf there manually, but it was decided that, that would
be uglier than a hook in etc/rc.
Developed in concert with: gordon
PR: 38919
Submitted by: Tommy Johnson
o IBM IDE CDROM
PR: 39537
Submitted by: Kevin Van Maren
o T-Sunus 130 card
PR: 41802
Submitted by: Oliver Schneider
o No-name OEM Prism card
o ActionTec Prism card
o ZoomAir 11Mbps High Rate wireless networking
PR: 41929, 41928
Submitted by: Bruce M Simpson
o Dynalink L100C16
PR: 41938
Submitted by: Marco van de Voort
1) Add new card entry for nortel eMobility wi card (from email
that I've lost the sender on :-(
2) put ata devices at config 0x1 rather than auto. This should be
better for nearly all cases.
MFC after: 3 days
rcNG. The $amd_flags variable was already taken over into $rc_flags
by run_rc_command() when amd_precmd() is executed, so changing
$amd_flags there no longer effects the actual execution of amd.
Hence in amd_precmd() the $rc_flags have to be adjusted instead.
o Recognize AMD Elan SC520 hostbridge.
o Add initialization code for the AMD Elan sc520 which maps the MMCR
into KVM and sets the i8254 frequency to the correct value.
o MAKEDEV entry for elan-mmcr device
Reviewed by: phk, jhb
Approved by: re(jhb)
under way to move the remnants of the a.out toolchain to ports. As the
comment in src/Makefile said, this stuff is deprecated and one should not
expect this to remain beyond 4.0-REL. It has already lasted WAY beyond
that.
Notable exceptions:
gcc - I have not touched the a.out generation stuff there.
ldd/ldconfig - still have some code to interface with a.out rtld.
old as/ld/etc - I have not removed these yet, pending their move to ports.
some includes - necessary for ldd/ldconfig for now.
Tested on: i386 (extensively), alpha
all instances of `${CMD_OSTYPE}` to just using ${OSTYPE}. This saves us a
shell invocation on anything that is OS-dependent. I seriously doubt that we
will be spontaneously changing OS types during bootup.
in the script. Eliminates a bug where we create a temp file, but don't
delete it since the rm(1) is only done if the check is enabled.
PR: bin/40960
Submitted by: frf <frf@xocolatl.com>
MFC after: 3 days
xntpd_* -> ntpd_*
portmap_* -> rpcbind_*
Also change single_mountd_enable -> mountd_enable
Changing the mountd flags brings us closer to NetBSD.
All of the old variable names are shimmed so you can continue to use the
old variable name.
Finally make /etc/rc.d/mountd no longer dependent on nfs as there are
(apparently) other consumers of mountd.
Submitted by: Mike Makonnen <makonnen@pacbell.net>
xntpd_* -> ntpd_*
portmap_* -> rpcbind_*
Also change single_mountd_enable to mountd_enable.
We also include shims for all the old variable names.
Submitted by: Mike Makonnen <makonnen@pacbell.net>
and others, because test(1) does not do shortcut evaluation.
Fix the same off-by-one error for acd*t* that revision 1.326 fixed
for other *cd devices.
Suggested by: bde
Reviewed by: bde
created cd1 as well due to an off-by-one error left over from
revision 1.249.
PR: conf/20436
Submitted by: Andre Albsmeier <andre.albsmeier@mchp.siemens.de>
MFC after: 1 week
MP=`mount -t ufs | grep -v " nosuid" | awk '{ print $3 }' | sort`
sets ${MP} to an empty string so the next line:
set ${MP}
actually just dumps all of the shells variables to stdout (and therefore
the security report). Fixed by surrounding the code which goes through the
mounts with a test for an empty string before using ${MP}.
Reviewed by: brian
MFC after: 3 days
/etc filesystem isn't enough; consequently, add "-i 4096" to the newfs
command for /etc. This results in 1022 inodes, which should be enough
for the forseeable future (although I don't know why we would ever
have more than 1000 files in a default /etc).
Silence by: -current
