o Use 8 space hard tabs
o Eliminate trailing white space (while I'm here, just in a couple of places)
o wrap mostly at 80 columns (printf literal strings being the notable
exception)
o use return (foo) consistantly
o use 0 vs NULL more consistantly
o use queue(3) xxx_FOREACH macros where appropriate (some places used it
before, others didn't).
o use BSD line continuation parameters
Pendants will likely notice minor style(9) violations, but for the
most part the file now looks much much closer to style(9) and is
mostly self-consistant.
Approved in principle by: dfr
Reviewed by: md5 (no changes to the .o)
Alter consumers of this method to conform to the new convention.
Minor cosmetic adjustments to bus.h.
This isn't of concern as this interface isn't in use yet.
macros which provide the same functionality and are a bit more
efficient, convert use of CIRCLEQ's in resource manager to TAILQ's.
Approved by: Garrett Wollman <wollman@khavrinen.lcs.mit.edu>
device tree and resource manager contents. This is the kernel side of
the upcoming libdevinfo, which will expose this information to userspace
applications in a trivial fashion.
Remove the now-obsolete DEVICE_SYSCTLS code.
implementation.
Add bus_generic_rl_{get,set,delete,release,alloc}_resource() functions
which provide generic operations for devices using resource list style
resource management.
This should simplify a number of bus drivers. Further commits to follow.
then treat it as such. This isn't perfect, but should do for things
like GENERIC. When in fallback mode, they will be used if there are NO
other hints.
interfaces. The original resource_find() returned a pointer to an internal
resource table entry. resource_find_hard() dereferences the actual
passed in value (oops!) - effectively trashing random memory due to
the pointer being passed in with a random initial value.
Submitted by: bde
Use strtoul(), not strtol() in the hints decoder so that
'flags 0xa0ffa0ff' is not truncated to 0x7fffffff.
Use a stack buffer instead of a static 100 byte bss buffer.
Use \0 for the NUL character.
Remove some ``excessive'' parens.
dynamic hints. This allows the resource_XXX_value() calls to work
before malloc() has started. This gets the serial console working as well
as a few other things.
Use Warner Losh's "hint" driver to decode ascii strings to fill the
resource table at boot time.
config(8) no longer generates an ioconf.c table - ie: the configuration
no longer has to be compiled into the kernel. You can reconfigure your
isa devices with the likes of this at loader(8) time:
set hint.ed.0.port=0x320
userconfig will be rewritten to use this style interface one day and will
move to /boot/userconfig.4th or something like that.
It is still possible to statically compile in a set of hints into a kernel
if you do not wish to use loader(8). See the "hints" directive in GENERIC
as an example.
All device wiring has been moved out of config(8). There is a set of
helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98)
that extract the 'at isa? port foo irq bar' from the old files and produces
a hints file. If you install this file as /boot/device.hints (and update
/boot/defaults/loader.conf - You can do a build/install in sys/boot) then
loader will load it automatically for you. You can also compile in the
hints directly with: hints "device.hints" as well.
There are a few things that I'm not too happy with yet. Under this scheme,
things like LINT would no longer be useful as "documentation" of settings.
I have renamed this file to 'NOTES' and stored the example hints strings
in it. However... this is not something that config(8) understands, so
there is a script that extracts the build-specific data from the
documentation file (NOTES) to produce a LINT that can be config'ed and
built. A stack of man4 pages will need updating. :-/
Also, since there is no longer a difference between 'device' and
'pseudo-device' I collapsed the two together, and the resulting 'device'
takes a 'number of units' for devices that still have it statically
allocated. eg: 'device fe 4' will compile the fe driver with NFE set
to 4. You can then set hints for 4 units (0 - 3). Also note that
'device fe0' will be interpreted as "zero units of 'fe'" which would be
bad, so there is a config warning for this. This is only needed for
old drivers that still have static limits on numbers of units.
All the statically limited drivers that I could find were marked.
Please exercise EXTREME CAUTION when transitioning!
Moral support by: phk, msmith, dfr, asmodai, imp, and others
required (rounded up a little) instead of twice the previous amount (or
a fixed amount for the first allocation).
The bug caused memory corruption when a new unit number for a devclass
was more than about twice the previous maximum one (or more than 3 for
the first one), so it corrupted memory (which happened to be the atkbdc
port resource list) in the reporter's configuration with sio unit
numbers { 0, 25, 1, 2, ... }.
Reviewed by: dfr
Reported by: Leonid Lukiyanets <stalwar78@hotmail.com>
buzy, only search upwards for a free slot to use..
This broke unit numbering on ATA systems where PCI attached controllers
come before the mainboard ones...
Reviewed by: dfr
is used to control whether the debug messages are output at runtime.
It defaults to on so that if you define BUS_DEBUG in your kernel
then you get all the debugging info when you boot.
It's very useful for disabling all the debugging info when you're
developing a loadable device driver and you're doing lots of loads
and unloads but don't always want to see all the debugging info.
bus/driver/kobj system. I am not 100% sure that this is the correct fix,
but it is harmless and does seem to solve the problem. At worst, it could
cause a tiny memory leak at unload time - this is better than a free(NULL)
and subsequent panic. I'm waiting for comments from Doug about this.
This may yet be backed out and fixed differently.
The change itself is to increment the reference count on drivers in one
case where it appears to have been missed. When everything is unloaded,
kobj_class_free() was being called twice in some cases, and panicing the
second time.
non-device code.
* Re-implement the method dispatch to improve efficiency. The new system
takes about 40ns for a method dispatch on a 300Mhz PII which is only
10ns slower than a direct function call on the same hardware.
This changes the new-bus ABI slightly so make sure you re-compile any
driver modules which you use.
release for inclusion into the release, but bde talked me out of
committing the module that needs this until after the release. It is
after the release now. :-)
This avoids the unit number from going up indefinitely when
diconnecting and connecting 2 devices alternately.
Noticed by: nsayer (quite a while ago)
And stop calling DEVICE_NOMATCH at probe repeatedly. This stops the
message on the PCI VGA board from being printed when loading a PCI driver.
This unspams the boot messages, concentrating on the drivers that have
actually been probed.
This basically resurrects revision 1.106 from old /sys/i386/isa/isa.c.
Reviewed by: jkh, dfr
device_add_child_ordered(). 'ivars' may now be set using the
device_set_ivars() function.
This makes it easier for us to change how arbitrary data structures are
associated with a device_t. Eventually we won't be modifying device_t
to add additional pointers for ivars, softc data etc.
Despite my best efforts I've probably forgotten something so let me know
if this breaks anything. I've been running with this change for months
and its been quite involved actually isolating all the changes from
the rest of the local changes in my tree.
Reviewed by: peter, dfr
Hopefully this clears up some confusion about the nature of
devclass_get_softc() vs. device_get_softc() as well.
The check against DS_ATTACHED remains as this is not
a change that modifies functionality.
Reviewed by: Peter "in principle" Wemm
resource_list_release. This removes the dependancy on the
layout of ivars.
* Move set_resource, get_resource and delete_resource from
isa_if.m to bus_if.m.
* Simplify driver code by providing wrappers to those methods:
bus_set_resource(dev, type, rid, start, count);
bus_get_resource(dev, type, rid, startp, countp);
bus_get_resource_start(dev, type, rid);
bus_get_resource_count(dev, type, rid);
bus_delete_resource(dev, type, rid);
* Delete isa_get_rsrc and use bus_get_resource_start instead.
* Fix a stupid typo in isa_alloc_resource reported by Takahashi
Yoshihiro <nyan@FreeBSD.org>.
* Print a diagnostic message if we can't assign resources to a PnP
device.
* Change device_print_prettyname() so that it doesn't print
"(no driver assigned)-1" for anonymous devices.
add nodes to the tree. Also, default to bus_generic_driver_added for
the BUS_DRIVER_ADDED method.
This allows newbus busses to be kldload'd.
Reviewed by: dfr
the attach/detach to
1) MOD_LOAD before attach
2) MOD_UNLOAD after detach
The driver specific event handler can now be used to function as
driver specific init/deinit function (compare to device specific
init/deinit functions: attach & detach).
