are safe to print, try to take into account the current locale.
This iterates over output strings using mbtowc() to identify
multi-byte sequences. If iswprint() claims the corresponding
wide character is printable, the original bytes are passed
through. Otherwise, we expand characters into C-style
\-escape sequences.
Submitted by: Michihiro NAKAJIMA
MFC after: 30 days
fchdir() to return back to the parent. If those fail,
we're just dead in the water. Add a new error value
TREE_ERROR_FATAL to indicate that directory traversal
cannot continue. Have write.c honor that by exiting
immediately.
MFC after: 30 days
that should result in a non-zero return value.
In particular, this should address the issue that David Wolfskill
ran into with a somewhat flaky NFS mount resulting in a damaged
archive even though tar returned success.
MFC after: 4 days
subtle why it comes out the way it does. Once you realize that it
depends on the archiving order, it's also important to realize that
filesystem differences aren't going to break this case. (Some of the
other tests have had to be extensively rewritten to make them
independent of the order in which a particular filesystem returns file
entries.)
(This commit also serves to note the PR number that I accidentally
omitted from the previous commit.)
PR: bin/128562
MFC after: 30 days
good job writing this test; it exercises a lot of subtle cases. The
trickiest one is that a hardlink to something that didn't get
extracted should not itself be extracted. In some sense, this is not
the desired behavior (we'd rather restore the file), but it's the best
you can do in a single-pass restore of a tar archive.
The test here should be extended to exercise cpio and newc formats as
well, since their hardlink models are different, which will lead to
different handling of some of these edge cases.
Submitted by: Jaakko Heinonen
MFC after: 30 days
This replaces the getopt()/getopt_long() wrapper, the old-style
argument rewriter and the associated configuration glue with a more
straightforward custom command parser. In particular, this ensures
that bsdtar will have consistent option parsing on every platform,
regardless of whether the platform supports getopt_long().
MFC after: 30 days
from Jaakko's original patch: I have misgivings about the portability
of the 'z' printf modifier so opted to cast the arguments to (int)
instead.
PR: bin/128561
Submitted by: Jaakko Heinonen
MFC after: 30 days
HAVE_STRUCT_STAT_ST_FLAGS, Linux support depends on the
existence of the appropriate ioctl() options. In particular,
this should fix some nagging compile errors on Linux platforms
that don't have e2fsprogs-devel installed.
In particular:
* tar -x -P follows symlinks to existing dirs, but not without -P
* symlinks to files are always replaced
* broken symlinks are always replaced
I would like to provide a way to preview the effects of pathname edits,
but pattern selection has to happen against the unedited path, so it
seems that we have to show people the unedited path to help in
designing selection patterns.
understand which code paths aren't possible.
This commit eliminates 117 false positive bug reports of the form
"allocate memory; error out if pointer is NULL; use pointer".
where it is used. [1]
Don't leak file descriptors in write_entry_backend if archive_write_header
returns ARCHIVE_FAILED.
Found by: Coverity Prevent [1]
since they are only tested for zero/nonzero; but it's arguably a bad
idea to set a {-1, 0} variable to 1 (as happens in this code).
Found by: Coverity Prevent
In addition to a number of bug fixes and minor changes:
* --numeric-owner (ignore user/group names on create and extract)
* -S (sparsify files on extraction)
* -s (regex filename substitutions)
* Use new libarchive 'linkify' to get correct hardlink handling for
both old and new cpio formats
* Rework 'copy' test to be insensitive to readdir() filename ordering
Most of the credit for this work goes to Joerg Sonnenberger, who
has been duplicating features from NetBSD's 'pax' program.
hardlink table for two reasons: 1. If le->name is set to NULL, the
structure le won't be inserted into the table; 2. Even if le somehow
did manage to get into the table with le->name equal to NULL, we would
die when we dereferenced le->null before we could get to the point of
freeing the entry.
Remove the unnecessary "if (le->name != NULL)" test and just free the
pointer.
Found by: Coverity Prevent
running 'tar ""' would print 'No memory' instead of the correct error
message, 'Must specify one of -c, -r, -t, -u, -x' if malloc is set to
System V mode (malloc(0) == NULL).
(in fact, there has never been any way for it to be NULL, going all the
way back to revision 1.1 of this file), so remove the check and
unconditionally free entry.
Found by: Coverity Prevent
handling to bsdtar. When writing archives (including copying via the
@archive directive) a line is output to stderr indicating what is being
done (adding or copying), the path, and how far through the file we are;
extracting currently does not report progress within each file, but
this is likely to happen eventually.
Discussed with: kientzle
Obtained from: tarsnap
files if the existing file is newer than the archive entry).
Currently if any files are ignored, bsdtar will exit with a non-zero
exit status; this is likely to change in the future, but requires some
API changes in libarchive.
Discussed with: kientzle
Obtained from: tarsnap
* --format can be used with -r or -u
* -o is a synonym for --format=ustar when used with -c, -r, or -u
Also, fix the erroneous sanity check that suppressed --format with -r or -u.
GNU tar changed -l to match SUSv2 a couple of years ago,
so bsdtar no longer needs to pander to this particular GNUism.
Thanks to: Debian maintainers
MFC after: 7 days
* prototypes for optarg/optind on platforms that don't already have them
* Disambiguate version number macros
* Remove unnecessary PACKAGE_NAME macro
* Hook for forthcoming bsdtar test suite
* Sync version number up with the portable distribution
(This does a couple of things that the standard library's strmode()
doesn't; it proved useful in bsdcpio as well, so I pushed it down
into libarchive.)
* Implement --use-compress-program using new libarchive feature.
* Minor portability improvement by adjusting casts used to
print out uids, gids, and device numbers.
Thanks to: Joerg Sonnenberger for the --use-compress-program implementation.
MFC after: 15 days
failed path is one which was specified on the command line.
This is a compromise between the situation prior to revision 1.57
(where a race between tar(1) and rm(1) could cause tar(1) to
spuriously report an error) and the situation after revision 1.57
(where "tar -c /no/such/path" prints a warning but returns with
an exit code of zero).
Inspired by: rafan
MFC after: 1 week
occur on the write side of extracting a file to ARCHIVE_WARN errors
when returning them from archive_read_extract.
In bsdtar: Use the return code from archive_read_data_into_fd and
archive_read_extract to determine whether we should continue trying to
extract an archive after one of the entries fails.
This commit makes extracting a truncated tarball complain once about
the archive being truncated, instead of complaining twice (once when
trying to extract an entry, and once when trying to seek to the next
entry).
Discussed with: kientzle
into separate append_archive and append_archive_filename functions; the first
takes a "struct archive *" as input, while the second takes a filename, opens
the archive, and calls the first.
There should be no changes in behaviour as a result of this commit; it simply
reorganizes code to make more sense. At some point in the future it may be
possible to share code between append_archive and read_archive, but not yet.
Discussed with: kientzle
affecting the return value from bsdtar), since (a) it usually occurs
due to a perfectly innocent (and unavoidable) race condition where a
user deletes a file in the window between bsdtar reading a directory
and attempting to read the file; and (b) aside from printing a warning
message, bsdtar behaves exactly as if the file had been deleted prior
to bsdtar reading its parent directory.
Reviewed by: kientzle
MFC after: 6 days
complaining about lstat(2) failing. It's a bit scary to find the message
tar: /: Cannot stat: No such file or directory
printed while doing a backup.
MFC after: 1 week
better job searching for the bsdtar binary to test and the gtar binary
to use for inter-operability testing. It should now find the built
(but not installed) binary if there is one, then search for an
installed binary in a number of standard locations.
* New test scripts exercise some basic functionality
* Most header inclusions are now protected (portability)
* read.c now relies on security checks in libarchive instead
of trying to do its own (optimization)
* -p now enabled by default for root, add --no-same-permissions
to disable it
* Comments, minor style fixes.
as part of an old configuration shuffle. As a result, although
ACL restore has been working, ACLs haven't been written into archives
for some time. <sigh>
Pointy hat: You know.
MFC after: 3 days
determine if this is a physical dir without an lstat().
While I'm in here, try to clarify the comments around
the _is_dir() and _is_physical_dir() tests.
(as determined by the initial size given to the header).
Libarchive recently changed to correctly return the amount
of data actually consumed in this case, which revealed this
bug in bsdtar.
* Create file if it doesn't exist.
* If archive is "empty", then append to it with pax restricted
* If user specified a format, use that if it's compatible with
the existing format.
forthcoming. This commit also has a number of style(9) fixes and
minor corrections so the code works better with the build system being
used for non-FreeBSD builds.
Many thanks to: Jaakko Heinonen, who proposed a mechanism for extended
attribute support and implemented both the machine-independent portion
and the Linux-specific portion.
(I'm not using GPL, but I still think there are good
ideas in the GNU projects. ;-) Among other things,
this should make it easier for clients of bsdtar to
recognize it automatically:
bsdtar --version | grep bsdtar
chdir(), be sure to undo the effects of the chdir before continuing.
Without this, after hitting a directory with mode 0111 (for example),
tar will get lost, and won't add any yet unvisted files to your
archive. (Or possibly add the wrong files, I suppose...)
Reviewed By: kientzle@
option is undocumented because it does nothing. It does nothing
because bsdtar never needs it. It is accepted because gnutar does
sometimes need it and many scripts use it.
Reported by: Pawel Jakub Dawidek
when list the archive contents, then try to extract selected files
(file selection always works against unedited pathnames). With this change,
-t always shows the pathnames as they appear in the archive.
Thanks to: Robert Watson
This causes attempts to update a non-existent file to report
an actual error instead of triggering an assertion failure.
PR: bin/87911
Thanks to: roemer.ulrich
MFC after: 3 days
Note: This does not entirely fix bin/87911. I need to decide on
the "correct" response when someone tries to update a non-existent
archive file.
set up before it is called, so move the progname initialization before
the first possible call to bsdtar_warnc().
Thanks to: Stanislav Sedov
PR: bin/83366
MFC after: 7 days
(combine with existing seconds-based), treat '-' as punctuation rather
than a negative number indicator (eliminates several special cases),
use a single list of special words instead of several separate lists,
use table-driven abbreviation logic (eliminate duplicate word entries
and special-case abbreviation and plural handling). The result is
shorter, simpler (judging from comments, earlier maintainers didn't
understand the special handling for "negative years"), handles more
cases (e.g., "tu" is now a recognized abbreviation for "tuesday",
"3rd" is now equivalent to "third") and it has 2 fewer shift/reduce
conflicts.
particular, acl support is no longer enabled on FreeBSD 4, acl support
should be correctly enabled on Linux, dirent.d_namlen should be
correctly detected on platforms that support it.
Thanks to: Greg Lewis, Juergen Lock, and Jaakko Heinonen
extraction and creation. While I'm here, fix a bug reported by Garrett
Wollman: when stripping the leading '/' from the path "/", don't produce
an entry with an empty name; produce "." instead.
Also, reduce the WARNS level to 5 since different build environments
end up using different Yacc skeletons. The BSD one does not
predeclare yyparse, the FSF one does, so it's not really possible to
consistently enforce both -Wmissing-prototypes and -Wredundant-decls.
