Radeon memmap code, which with a new DDX driver and DRI drivers should fix
long-term stability issues with Radeons. Also adds support for r200's
ATI_fragment_shader, r300 texrect support and texture caching fixes, i915
vblank support and bugfixes, and new PCI IDs.
The real problem was that ioctl handlers needed to call amr_wait_command()
with the list lock held. This not only solves the completion race, it also
prevents bounce buffer corruption that could arise from amr_start() being
called without the proper locks held.
Discussed with: ps
MFC After: 3 days
the completion of the command can occur before tsleep is called and
the command ends up blocking forever since the wakeup has already
been called.
Submitted by: ups
new chips and improves support for already supported ones.
Some details, important for future merges:
- if_em.c merged manually, viewing diff between new vendor
driver and previous one.
- if_em_hw.h dropped in from vendor, and then restored revisions
1.16, 1.17, 1.18.
- if_em_hw.c dropped in from vendor, and then two liner change made,
that restores support for two rare chips.
the NS8250 class driver. The UART has FIFOs if sc_rxfifosz>1, so
test for that instead.
While here properly initialize sc_rxfifosz and sc_txfifosz in the
case the UART doesn't have FIFOs.
There's something strange going on with async events. They seem
to be be treated differently for different Fusion implementations.
Some will really tell you when it's okay to free the request that
started them. Some won't. Very disconcerting.
This is particularily bad when the chip (FC in this case) tells you
in the reply that it's not a continuation reply, which means you
can free the request that its associated with. However, if you do
that, I've found that additional async event replies come back for
that message context after you freed it. Very Bad Things Happen.
Put in a reply register debounce. Warn about out of range context
indices. Use more MPILIB defines where possible. Replace bzero with
memset. Add tons more KASSERTS. Do a *lot* more request free list
auditting and serial number usages. Get rid of the warning about
the short IOC Facts Reply. Go back to 16 bits of context index.
Do a lot more target state auditting as well. Make a tag out
of not only the ioindex but the request index as well and worry
less about keeping a full serial number.
a different register shift and is fed by a different clock than
we use for UltraSPARC hardware. To deal with this, the regshft and
rclk fields in the class structure are removed and bus frontends
now pass the right regshft and rclk to the probe function where
they're put in the BAS and passed in to subordinate drivers.
--------------------
- Seal the fate of long standing memory leak (4 years, 7 months) during
pcm_unregister(). While destroying cdevs, scan / detect possible
children and free its SLIST placeholder properly.
- Optimize channel allocation / numbering even further. Do brute cyclic
checking only if the channel numbering screwed.
- Mega vchan create/destroy cleanup:
o Implement pcm_setvchans() so everybody can use it freely instead
of implementing their own, be it through sysctl or channel auto
allocation.
o Increase vchan creation/destruction resiliency:
+ it's possible to increase/decrease total vchans even during
busy playback/recording. Busy channel will be left alone, untouched.
Abusive test sample:
# play whatever...
#
while : ; do
sysctl hw.snd.pcm0.vchans=1
sysctl hw.snd.pcm0.vchans=10
sysctl hw.snd.pcm0.vchans=100
sysctl hw.snd.pcm0.vchans=200
done
# Play something else, leave above loop running frantically.
+ Seal another 4 years old bug where it is possible to destroy (virtual)
channel even when its cdevs being referenced by other process.
The "First Come First Served" nature of dsp_clone() is the main
culprit of this issue, and usually manifest itself as dangling
channel <-> process association. Ensure that all of its cdevs
are free from being referenced before destroying it (through
ORPHAN_CDEVT() macross).
All these fixes (including previous fixes) will be MFCed, later.
to avoid possible device unregister race (impossible to reproduce, yet
possible).
- Extra sanity check to ensure proper parent channel is being selected.
- Reset parent channel once all of its children gone.
controllers typically have multiple channels and support a number
of serial communications protocols. The scc(4) driver is itself
an umbrella driver that delegates the control over each channel
and mode to a subordinate driver (like uart(4)).
The scc(4) driver supports the Siemens SAB 82532 and the Zilog
Z8530 and replaces puc(4) for these devices.
in the ISR doesn't read the actual socket event register, but instead
reads garbage (usually 0xffffffff, but other times other things).
This totally violates the PCI spec, but happens rarely enough that a
workaround is in order. This adds one test when we have a real
interrupt to service (which is very rare), and doesn't affect the
usualy 'nothing to see here' case at all.
Problem reported by many, but sam@ gave me this workaround after
diagnosing the problem.
some systems were designed so that AML writes to various resources shared
with OS drivers, including the RTC, PIC, PCI, etc. These writes could
collide with writes by the OS and should never be performed. For now, we
print a message if such an access occurs, but do not block it. To block
the access, the tunable "debug.acpi.block_bad_io" can be set to 1. In the
future, we will flip the switch and this will become the default.
Information about this problem was found in Microsoft KB 283649. They
block IO accesses if the BIOS indicates via _OSI that it is Windows 2001
or higher. They always block accesses to the PIC, cascaded PIC, and ELCRs,
no matter how old the BIOS.
systems (blade servers). On most systems, this is implemented as an IO
write to the SMI port and the BIOS generates the actual reset.
PR: kern/94939
Submitted by: dodell@ixsystems.com
Reviewed by: jhb
MFC after: 3 weeks
Saab for helping to track this down. Fix a error with 32bit DMA size
calculation that seemed to be harmless. Add a few micro-optimizations while
I'm here.
mddestroy() only if the file is from a non-MPSAFE VFS.
- No longer unconditionally hold Giant in the md kthread for vnode-backed
kthreads.
- Improve the handling of the thread exit race when destroying an md
device.
a problem with listing large number of md(4) devices. Either 'list' or
'query' mode uses XML.
Additionally, new functionality was introduced. It's possible to pass
multiple devices to -u:
# ./mdconfig -l -u md0,md1
Approved by: cognet (mentor)
Kernel changes:
Inform hwpmc of executable objects brought into the system by
kldload() and mmap(), and of their removal by kldunload() and
munmap(). A helper function linker_hwpmc_list_objects() has been
added to "sys/kern/kern_linker.c" and is used by hwpmc to retrieve
the list of currently loaded kernel modules.
The unused `MAPPINGCHANGE' event has been deprecated in favour
of separate `MAP_IN' and `MAP_OUT' events; this change reduces
space wastage in the log.
Bump the hwpmc's ABI version to "2.0.00". Teach hwpmc(4) to
handle the map change callbacks.
Change the default per-cpu sample buffer size to hold
32 samples (up from 16).
Increment __FreeBSD_version.
libpmc(3) changes:
Update libpmc(3) to deal with the new events in the log file; bring
the pmclog(3) manual page in sync with the code.
pmcstat(8) changes:
Introduce new options to pmcstat(8): "-r" (root fs path), "-M"
(mapfile name), "-q"/"-v" (verbosity control). Option "-k" now
takes a kernel directory as its argument but will also work with
the older invocation syntax.
Rework string handling in pmcstat(8) to use an opaque type for
interned strings. Clean up ELF parsing code and add support for
tracking dynamic object mappings reported by a v2.0.00 hwpmc(4).
Report statistics at the end of a log conversion run depending
on the requested verbosity level.
Reviewed by: jhb, dds (kernel parts of an earlier patch)
Tested by: gallatin (earlier patch)
the error on sparc64 hadn't changed since the last checkin, pass
LINT on other platforms and mpt doesn't work on sparc64 anyway
and the tinderbox build didn't work for me in a cross build case
on my main build machine (which runs RELENG_6). Sigh. Still
need to try harder.
