an invalid address. It is also unneeded on arm64 as we use the ARM Generic
Timer driver.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
TODO:
* drink real coffee before committing in the morning, or there's a high
risk of more obviously self-evident commits being turned into attempts
at humour.
Reported by: cem, Coverity CID 1366219
See r294954 for the bread(9) change and r297401 for similar cd9660 fix.
Reported and tested by: Joshua Kinard <kumba@gentoo.org>
PR: 214705
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
illumos/illumos-gate@90f2c094b390f2c094b3https://www.illumos.org/issues/7181
zfsvfs_setup() is called in both zfs_mount and zfs_resume_fs paths.
dmu_objset_set_user(zfsvfs->z_os, zfsvfs) is called early in zfsvfs_setup()
before the setup is actually completed,
thus an under-constructed zfsvfs becomes visible.
Additionally, there is nothing to serialize the two call paths. As a result two
threads can step on each other's toes.
assertion failed: zilog->zl_clean_taskq == NULL, file:
../../common/fs/zfs/zil.c, line: 1772
> $c
vpanic()
0xfffffffffbdf6928()
zil_open+0x45(ffffff1bbc5dd000, fffffffff7993880)
zfsvfs_setup+0x84(ffffffb378d77000, 0)
zfs_resume_fs+0x132(ffffffb378d77000, ffffffb37ddcf000)
zfs_ioc_rollback+0x96(ffffffb37ddcf000, ffffff01dcdc4cd0, ffffff01aa091000)
zfsdev_ioctl+0x215(10a00000000, 5a19, 80465f8, 100003, ffffff01ab318368,
ffffff0004b59e58)
cdev_ioctl+0x39(10a00000000, 5a19, 80465f8, 100003, ffffff01ab318368,
ffffff0004b59e58)
spec_ioctl+0x60(ffffff0197737700, 5a19, 80465f8, 100003,
ffffff01ab318368, ffffff0004b59e58)
fop_ioctl+0x55(ffffff0197737700, 5a19, 80465f8, 100003,
ffffff01ab318368, ffffff0004b59e58)
ioctl+0x9b(7, 5a19, 80465f8)
sys_syscall32+0x1f7()
> ffffff1bbc5dd000::print objset_t os_zil
os_zil = 0xffffff1c053cf7c0
> 0xffffff1c053cf7c0::print zilog_t zl_clean_taskq
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
Author: Andriy Gapon <andriy.gapon@clusterhq.com>
illumos/illumos-gate@c079fa4d20c079fa4d20https://www.illumos.org/issues/6428
Scenario:
$ zfs create rpool/p
$ zfs set canmount=noauto rpool/p
$ zfs umount rpool/p
$ zfs create rpool/p/c
$ zfs get -r mounted,canmount rpool/p
NAME PROPERTY VALUE SOURCE
rpool/p mounted no -
rpool/p canmount noauto local
rpool/p/c mounted yes -
rpool/p/c canmount on default
In another shell ensure that rpool/p/c is in use, for example:
$ cd /rpool/p/c
Then:
$ zfs set canmount=off rpool/p
cannot unmount '/rpool/p/c': Device busy
But there is no reason to try to unmount rpool/p/c in this scenario.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
Author: Andriy Gapon <andriy.gapon@clusterhq.com>
7199 dsl_dataset_rollback_sync may try to free already free blocks
7200 no blocks must be born in a txg after a snaphot is created
illumos/illumos-gate@bfaed0b91ebfaed0b91ehttps://www.illumos.org/issues/7199
dsl_dataset_rollback_sync may try to free already freed blocks when it calls
dsl_destroy_head_sync_impl to destroy a temporary clone.
That happens if a snapshot to which we are rolling back and from which the
clone is created has some ZIL records.
https://www.illumos.org/issues/7200
No new blocks must be born in a dataset in the same TXG after a snapshot of the
dataset is taken.
Those blocks would have the same blk_birth as the dataset's ds_prev_snap_txg
and as such they would be presumed to belong o the snapshot while in fact they
do not.
All the datasets must be clean before sync tasks are run, so the described
scenario may happen only if one of the sync tasks dirties the dataset and
another sync task takes its snapshot.
Then, there will be another sync pass because of the dirty data and the new
blocks will be born in the same TXG when the data is written out.
It seems that almost all of the existing sync tasks modify only MOS and do not
dirty any objsets.
The only exception that I've been able to identify so far is the rollback which
can modify an objset when it zeroes out the objset's ZIL.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
Author: Andriy Gapon <andriy.gapon@clusterhq.com>
illumos/illumos-gate@690041b9ca690041b9cahttps://www.illumos.org/issues/7180
If a filesystem is not unmounted while the rename is being performed, then, for
example, a concurrect zfs rollback may call zfs_suspend_fs followed by
zfs_resume_fs on the same filesystem.
The latter takes the filesystem's name as an argument. If the filesystem name
changes as a result of the rename, then dmu_objset_hold(osname, zfsvfs, &os)
call in zfs_resume_fs would fail resulting in a kernel panic.
So far I have been able to reproduce this problem on FreeBSD where zfs rename
has -u option that skips the unmounting before doing the renaming.
But I think that in theory the same problem can occur on illumos as well,
because the unmounting is done in userland before invoking the rename ioctl and
there could be a race with, e.g., zfs mount.
panic: solaris assert: dmu_objset_hold(osname, zfsvfs, &zfsvfs->z_os) == 0 (0x2
== 0x0), file: /usr/devel/svn/head/sys/cddl/contrib/opensolaris/uts/common/fs/
zfs/zfs_vfsops.c, line: 2210
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe004df30710
vpanic() at vpanic+0x182/frame 0xfffffe004df30790
panic() at panic+0x43/frame 0xfffffe004df307f0
assfail3() at assfail3+0x2c/frame 0xfffffe004df30810
zfs_resume_fs() at zfs_resume_fs+0xb9/frame 0xfffffe004df30860
zfs_ioc_rollback() at zfs_ioc_rollback+0x61/frame 0xfffffe004df308a0
zfsdev_ioctl() at zfsdev_ioctl+0x65c/frame 0xfffffe004df30940
devfs_ioctl_f() at devfs_ioctl_f+0x156/frame 0xfffffe004df309a0
kern_ioctl() at kern_ioctl+0x246/frame 0xfffffe004df30a00
sys_ioctl() at sys_ioctl+0x171/frame 0xfffffe004df30ae0
amd64_syscall() at amd64_syscall+0x2db/frame 0xfffffe004df30bf0
Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe004df30bf0
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Andriy Gapon <andriy.gapon@clusterhq.com>
illumos/illumos-gate@9185393f299185393f29https://www.illumos.org/issues/6412
It seems that zfs receive -F -u would mount a received filesystem after
receiving a full stream if a destination filesystem already existed (and, thus,
got destroyed and re-created) and was mounted.
How to reproduce:
$ zfs create rpool/sandbox
$ zfs create rpool/sandbox/from
$ zfs create rpool/sandbox/to
$ zfs snap rpool/sandbox/from@snap
$ zfs send rpool/sandbox/from@snap | zfs recv -v -F -u rpool/sandbox/to
receiving full stream of rpool/sandbox/from@snap into rpool/sandbox/to@snap
received 41.7KB stream in 1 seconds (41.7KB/sec)
$ zfs get mounted rpool/sandbox/to
NAME PROPERTY VALUE SOURCE
rpool/tmp/sandbox/to mounted yes -
This behavior can be problematic if the mountpoint property changes either
because it had a non-inherited value or the stream contains properties because
it has been generated with either -R or -p.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Andriy Gapon <andriy.gapon@clusterhq.com>
The pager, due to its construction, implements clustering for the
page-ins. In particular, buildworld load demonstrates reduction of
the READ RPCs from 39k down to 24k. No change in real or CPU time was
observed.
Discussed with, and measured by: bde
No objections from: rmacklem
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This just stores pointers to the IE; it doesn't yet parse anything.
Note: it blows out the size of ieee80211_node, so this will require
ye olde kernel/modules recompile.
* Obey the peer A-MPDU density if it's larger than the currently configured
one.
* Pay attention to the peer A-MPDU max-size and don't assume we can transmit
a full A-MPDU (64k!) if the peer announces smaller values.
Relnotes: ath(4): Fix A-MPDU transmit; obey A-MPDU density and max size.
* Pepper comments around which describe what state(s) we're in when faking
up 11n nodes.
* By default don't fake it up as 11n until we properly negotiate the 11n
capabilities using probe request/response frames.
* Send a probe request with our HT information, as the 802.11-2012 spec
suggests.
* Reassociate with the driver if we've been promoted.
This is done because although learning a peer via beacons can learn 11n
state, learning peers via hearing probe frames and broadcast frames
does not. Thus, sometimes you end up with an 11n peer in the peer
table and sometimes you don't.
Note that the probe request/response exchange may not actually succeed.
Ideally we'd put the peer into some blocking state until we've exchanged
probe request/reponse to learn capabilities, or we timeout and just
stay non-11n.
This is more an experiment to get 11n IBSS nodes actually discovering
each other and be able to transmit. There are other issues that creep
up which I'll attempt to address in future commits.
Tested:
* AR9380 NICs in 11n mode.
Reviewed by: avos
Differential Revision: https://reviews.freebsd.org/D8365
This avoids the time-warp after kthreads have started running and the
required fixup to td_slptick and td_blktick in the EARLY_AP_STARTUP
case. Now, 'ticks' is initialized before any kthreads are created or
any context switches are performed.
Tested by: gavin
MFC after: 2 weeks
Sponsored by: Netflix
always audit the file-descriptor number and vnode information for all
fnctl(2) commands, not just locking-related ones. This was likely an
oversight in the original adaptation of this code from XNU.
MFC after: 3 days
Sponsored by: DARPA, AFRL
The default pkg(8) from pkg.freebsd.org requires libjail.so,
so mark the jail package as vital along with the runtime
package to avoid errors when libjail.so is removed. This is
a no-op for systems with WITHOUT_JAIL in src.conf(5) and pkg(8)
built from the Ports Collection.
In order to make this work without marking packages such as
the jail-lib32, for example, the jail.ucl file needed to be
split out into separate files similarly to the runtime-*.ucl
files.
Glanced at by: brd
MFC after: 5 days
Sponsored by: The FreeBSD Foundation
many borken middle-boxes tend to do that. But during 3whs, in syncache_expand(),
we don't do that which causes us to send a RST to such a client. Relax this
constraint by only using tsecr to compare against timestamp that we sent when it
is not 0. As a result, we'd now accept the final ACK of 3whs with tsecr of 0.
Reviewed by: jtl, gnn
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D8552
This patch allows to specify PHY register offset for ukswitch. For instance,
switch MAICREL KS8995XA connected via MDIO to SoC, but PHY register starts
at 1. So hint for this case is: hint.ukswitch.0.phyoffset=1
No change/effect if hint is not set.
Submitted by: Hiroki Mori <yamori813@yahoo.co.jp>
Reviewed by: adrian, mizhka
Approved by: adrian(mentor)
Differential Revision: https://reviews.freebsd.org/D8584
FDT attachment to a new file. A separate ACPI attachment will then be added
to allow arm64 servers with ACPI to use it over FDT.
This should also help with merging this with the ofwpci driver, with
further work needed to remove restrictions this driver places on resource
allocation.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7319
(hopefully) stock gcc 4.2.1 on i386 and other arches.
In particular:
- Do not use %ebx in the asm constraints on i386, since rtld is
compiled with -fPIC and gcc cannot handle GOT-base register reload
(clang and newer gcc can).
- Avoid direct use of [static N] construct in the function
declaration/definion. In-tree gcc was patched to support this, but
stock 4.2.1 cannot handle the feature.
Requested by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
uart we need to handle both it and FDT, and as such we need to have an
architecture specific driver.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7796
on the AES-NI code, and modified as needed for use on ARMv8. When loaded
the driver will check the appropriate field in the id_aa64isar0_el1
register to see if AES is supported, and if so the probe function will
signal the driver should attach.
With this I have seen up to 2000Mb/s from the cryptotest test with a single
thread on a ThunderX Pass 2.0.
Reviewed by: imp
Obtained from: ABT Systems Ltd
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8297
Just in case, the # of TX/RX rings is changed upon synthetic parts
re-attach.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8520
