Commit Graph

69 Commits

Author SHA1 Message Date
Pawel Jakub Dawidek
6b3d6017e8 s/destory/destroy/ (except for the code in contrib/). 2007-04-16 12:31:35 +00:00
Robert Watson
f8209ca81d Factor out my copyrights + licenses from Charles D. Cranor and
University of Washington copyrights, which include the
advertising clause.  Move $NetBSD$ into standard location for
FreeBSD source files, and normalize formatting.

MFC after:	3 days
2007-01-08 22:30:39 +00:00
Robert Watson
a152f8a361 Change semantics of socket close and detach. Add a new protocol switch
function, pru_close, to notify protocols that the file descriptor or
other consumer of a socket is closing the socket.  pru_abort is now a
notification of close also, and no longer detaches.  pru_detach is no
longer used to notify of close, and will be called during socket
tear-down by sofree() when all references to a socket evaporate after
an earlier call to abort or close the socket.  This means detach is now
an unconditional teardown of a socket, whereas previously sockets could
persist after detach of the protocol retained a reference.

This faciliates sharing mutexes between layers of the network stack as
the mutex is required during the checking and removal of references at
the head of sofree().  With this change, pru_detach can now assume that
the mutex will no longer be required by the socket layer after
completion, whereas before this was not necessarily true.

Reviewed by:	gnn
2006-07-21 17:11:15 +00:00
Robert Watson
19af5f6b17 style(9) treatment following fixups.
MFC after:	3 months
2006-04-23 16:33:56 +00:00
Robert Watson
f4b40382e3 Eliminate unnecessary use of labels in error unwinding cases; result is
the same number or fewer lines of code.

Don't cast using caddr_t.

Remember to unlock the natm lock in some error cases where it was leaked
previously.

Annotate two cases where we'd like to hold the natm subsystem lock over
ioctls into the device driver.

Hold the natm lock longer in natm_usr_connect() so we can copy the npcb
fields while holding the mutex.

MFC after:	3 months
2006-04-23 16:25:30 +00:00
Robert Watson
5da9a72fcf Acquire natm mutex after traversing so_pcb, not before, as the protocol
mutex is no longer required to ensure that so_pcb is valid.

Make sure to free (control) in natm_usr_send() when there M_PREPEND()
frees (m).

MFC after:	3 months
2006-04-23 16:04:07 +00:00
Robert Watson
3f0c18fdda Update natm PCB debugging code:
- Depend on opt_ddb.h, since npcb_dump() is ifdef'd DDB.
- Include ddb/ddb.h so we can call db_printf() and use DB_SHOW_COMMAND().
- Don't test results of malloc() under DIAGNOSTIC, let the memory allocator
  take care of its own invariants.

MFC after:	1 month
2006-04-23 15:23:31 +00:00
Robert Watson
b0f4fba749 In natm_usr_abort(), replace existing call to natm_usr_shutdown() with
natm_usr_detach(), which actually does the right thing.  This code has
never worked properly, but also was never invoked since we only abort
connections associated with listen sockets, and netnam doesn't support
listen sockets.

MFC after:	3 months
2006-04-09 17:14:09 +00:00
Robert Watson
bc725eafc7 Chance protocol switch method pru_detach() so that it returns void
rather than an error.  Detaches do not "fail", they other occur or
the protocol flags SS_PROTOREF to take ownership of the socket.

soclose() no longer looks at so_pcb to see if it's NULL, relying
entirely on the protocol to decide whether it's time to free the
socket or not using SS_PROTOREF.  so_pcb is now entirely owned and
managed by the protocol code.  Likewise, no longer test so_pcb in
other socket functions, such as soreceive(), which have no business
digging into protocol internals.

Protocol detach routines no longer try to free the socket on detach,
this is performed in the socket code if the protocol permits it.

In rts_detach(), no longer test for rp != NULL in detach, and
likewise in other protocols that don't permit a NULL so_pcb, reduce
the incidence of testing for it during detach.

netinet and netinet6 are not fully updated to this change, which
will be in an upcoming commit.  In their current state they may leak
memory or panic.

MFC after:	3 months
2006-04-01 15:42:02 +00:00
Robert Watson
ac45e92ff2 Change protocol switch pru_abort() API so that it returns void rather
than an int, as an error here is not meaningful.  Modify soabort() to
unconditionally free the socket on the return of pru_abort(), and
modify most protocols to no longer conditionally free the socket,
since the caller will do this.

This commit likely leaves parts of netinet and netinet6 in a situation
where they may panic or leak memory, as they have not are not fully
updated by this commit.  This will be corrected shortly in followup
commits to these components.

MFC after:      3 months
2006-04-01 15:15:05 +00:00
Robert Watson
23801379f0 Change so_pcb invariants in netnatm, such that netnatm sockets always have
pcb's allocated:

- Universally ensure (and assert) that so_pcb is not NULL, removing lots
  of checks and error cases.  Don't free the pcb without clearing the
  so_pcb pointer.

- Don't try to free the socket in pru_detach(), since the caller will
  immediately free the socket.

- Do retain the sotryfree() in pru_abort() for now, although eventually
  the caller will do it unconditionally.
2006-03-17 18:25:57 +00:00
Ruslan Ermilov
303989a2f3 Use sparse initializers for "struct domain" and "struct protosw",
so they are easier to follow for the human being.
2005-11-09 13:29:16 +00:00
David E. O'Brien
5b1c0294e4 Forward declaring static variables as extern is invalid ISO-C. Now that
GCC can properly handle forward static declarations, do this properly.
2005-09-07 10:06:14 +00:00
Robert Watson
13f4c340ae Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags.  Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags.  This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.

Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.

Reviewed by:	pjd, bz
MFC after:	7 days
2005-08-09 10:20:02 +00:00
Robert Watson
401a2b590e Remove FreeBSD 2.2 protocol usrreq compatibility code.
Remove minor #ifdefs for early NetBSD and OpenBSD compatibility.

Remove spl-related definitions.

MFC after:	2 weeks
2005-07-19 13:36:39 +00:00
Robert Watson
f002340544 Lock down netnatm and mark as MPSAFE:
- Introduce a subsystem mutex, natm_mtx, manipulated with accessor macros
  NATM_LOCK_INIT(), NATM_LOCK(), NATM_UNLOCK(), NATM_LOCK_ASSERT().  It
  protects the consistency of pcb-related data structures.  Finer grained
  locking is possible, but should be done in the context of specific
  measurements (as very little work is done in netnatm -- most is in the
  ATM device driver or socket layer, so there's probably not much
  contention).

- Remove GIANT_REQUIRED, mark as NETISR_MPSAFE, remove
  NET_NEEDS_GIANT("netnatm").

- Conditionally acquire Giant when entering network interfaces for
  ifp->if_ioctl() using IFF_LOCKGIANT(ifp)/IFF_UNLOCKGIANT(ifp) in order
  to coexist with non-MPSAFE atm ifnet drivers..

- De-spl.

MFC after:	2 weeks
Reviewed by:	harti, bms (various versions)
2005-07-18 16:55:46 +00:00
Robert Watson
1eb7608e00 Mark netatm and netnatm explicitly as requiring Giant, as they still do.
MFC after:	3 days
2005-02-17 14:21:22 +00:00
Warner Losh
c398230b64 /* -> /*- for license, minor formatting changes 2005-01-07 01:45:51 +00:00
Poul-Henning Kamp
756d52a195 Initialize struct pr_userreqs in new/sparse style and fill in common
default elements in net_init_domain().

This makes it possible to grep these structures and see any bogosities.
2004-11-08 14:44:54 +00:00
Robert Watson
81158452be Push acquisition of the accept mutex out of sofree() into the caller
(sorele()/sotryfree()):

- This permits the caller to acquire the accept mutex before the socket
  mutex, avoiding sofree() having to drop the socket mutex and re-order,
  which could lead to races permitting more than one thread to enter
  sofree() after a socket is ready to be free'd.

- This also covers clearing of the so_pcb weak socket reference from
  the protocol to the socket, preventing races in clearing and
  evaluation of the reference such that sofree() might be called more
  than once on the same socket.

This appears to close a race I was able to easily trigger by repeatedly
opening and resetting TCP connections to a host, in which the
tcp_close() code called as a result of the RST raced with the close()
of the accepted socket in the user process resulting in simultaneous
attempts to de-allocate the same socket.  The new locking increases
the overhead for operations that may potentially free the socket, so we
will want to revise the synchronization strategy here as we normalize
the reference counting model for sockets.  The use of the accept mutex
in freeing of sockets that are not listen sockets is primarily
motivated by the potential need to remove the socket from the
incomplete connection queue on its parent (listen) socket, so cleaning
up the reference model here may allow us to substantially weaken the
synchronization requirements.

RELENG_5_3 candidate.

MFC after:	3 days
Reviewed by:	dwhite
Discussed with:	gnn, dwhite, green
Reported by:	Marc UBM Bocklet <ubm at u-boot-man dot de>
Reported by:	Vlad <marchenko at gmail dot com>
2004-10-18 22:19:43 +00:00
Robert Watson
c17a7759af Constify send and receive space constants in natm. 2004-06-24 03:11:29 +00:00
Robert Watson
395a08c904 Extend coverage of SOCK_LOCK(so) to include so_count, the socket
reference count:

- Assert SOCK_LOCK(so) macros that directly manipulate so_count:
  soref(), sorele().

- Assert SOCK_LOCK(so) in macros/functions that rely on the state of
  so_count: sofree(), sotryfree().

- Acquire SOCK_LOCK(so) before calling these functions or macros in
  various contexts in the stack, both at the socket and protocol
  layers.

- In some cases, perform soisdisconnected() before sotryfree(), as
  this could result in frobbing of a non-present socket if
  sotryfree() actually frees the socket.

- Note that sofree()/sotryfree() will release the socket lock even if
  they don't free the socket.

Submitted by:	sam
Sponsored by:	FreeBSD Foundation
Obtained from:	BSD/OS
2004-06-12 20:47:32 +00:00
Robert Watson
746e5bf09b Rename dup_sockaddr() to sodupsockaddr() for consistency with other
functions in kern_socket.c.

Rename the "canwait" field to "mflags" and pass M_WAITOK and M_NOWAIT
in from the caller context rather than "1" or "0".

Correct mflags pass into mac_init_socket() from previous commit to not
include M_ZERO.

Submitted by:	sam
2004-03-01 03:14:23 +00:00
Robert Watson
a557af222b Introduce a MAC label reference in 'struct inpcb', which caches
the   MAC label referenced from 'struct socket' in the IPv4 and
IPv6-based protocols.  This permits MAC labels to be checked during
network delivery operations without dereferencing inp->inp_socket
to get to so->so_label, which will eventually avoid our having to
grab the socket lock during delivery at the network layer.

This change introduces 'struct inpcb' as a labeled object to the
MAC Framework, along with the normal circus of entry points:
initialization, creation from socket, destruction, as well as a
delivery access control check.

For most policies, the inpcb label will simply be a cache of the
socket label, so a new protocol switch method is introduced,
pr_sosetlabel() to notify protocols that the socket layer label
has been updated so that the cache can be updated while holding
appropriate locks.  Most protocols implement this using
pru_sosetlabel_null(), but IPv4/IPv6 protocols using inpcbs use
the the worker function in_pcbsosetlabel(), which calls into the
MAC Framework to perform a cache update.

Biba, LOMAC, and MLS implement these entry points, as do the stub
policy, and test policy.

Reviewed by:	sam, bms
Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, Network Associates Laboratories
2003-11-18 00:39:07 +00:00
Sam Leffler
7902224c6b o add a flags parameter to netisr_register that is used to specify
whether or not the isr needs to hold Giant when running; Giant-less
  operation is also controlled by the setting of debug_mpsafenet
o mark all netisr's except NETISR_IP as needing Giant
o add a GIANT_REQUIRED assertion to the top of netisr's that need Giant
o pickup Giant (when debug_mpsafenet is 1) inside ip_input before
  calling up with a packet
o change netisr handling so swi_net runs w/o Giant; instead we grab
  Giant before invoking handlers based on whether the handler needs Giant
o change netisr handling so that netisr's that are marked MPSAFE may
  have multiple instances active at a time
o add netisr statistics for packets dropped because the isr is inactive

Supported by:	FreeBSD Foundation
2003-11-08 22:28:40 +00:00
Brooks Davis
9bf40ede4a Replace the if_name and if_unit members of struct ifnet with new members
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.

This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.

Approved By:	re (in principle)
Reviewed By:	njl, imp
Tested On:	i386, amd64, sparc64
Obtained From:	NetBSD (if_xname)
2003-10-31 18:32:15 +00:00
Hartmut Brandt
a808105d63 Remove the last vestiges of ATM raw mode. This has not been useful for a
long time and has already been removed from the only driver that supported
it (en(4)) and from the man page.
2003-08-06 14:34:38 +00:00
Hartmut Brandt
1d253d7336 Use the new OPENVCC and CLOSEVCC ioctls to open and close the NATM
channel. These have been the last consumers of the old ioctls.
2003-08-06 14:07:54 +00:00
Hartmut Brandt
9a6d13bede Style(9): remove unneccesary space and blank lines, indentation,
function prototypes. Use LIST_FOREACH instead of explicit loops.

The indentation of functions indendet by 4 space have been left alone.
2-space indented functions have been re-indented.
2003-08-06 13:46:15 +00:00
Hartmut Brandt
fe8dee1062 Instead of returning an error call the ioctl() handler of the interface
when we get request that we cannot handle ourself. This allows userland
to reach the ATM interfaces for ioctls.
2003-07-15 15:51:50 +00:00
David E. O'Brien
ab0de15baf Use __FBSDID(). 2003-06-11 05:37:42 +00:00
Dag-Erling Smørgrav
fe58453891 Introduce an M_ASSERTPKTHDR() macro which performs the very common task
of asserting that an mbuf has a packet header.  Use it instead of hand-
rolled versions wherever applicable.

Submitted by:	Hiten Pandya <hiten@unixdaemons.com>
2003-04-08 14:25:47 +00:00
Jonathan Lemon
1cafed3941 Update netisr handling; Each SWI now registers its queue, and all queue
drain routines are done by swi_net, which allows for better queue control
at some future point.  Packets may also be directly dispatched to a netisr
instead of queued, this may be of interest at some installations, but
currently defaults to off.

Reviewed by: hsu, silby, jayanth, sam
Sponsored by: DARPA, NAI Labs
2003-03-04 23:19:55 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Alfred Perlstein
44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
Poul-Henning Kamp
c7e1894e95 Be consistent about functions being static.
Spotted by:	FlexeLint.
2002-10-16 09:19:17 +00:00
Seigo Tanimura
4cc20ab1f0 Back out my lats commit of locking down a socket, it conflicts with hsu's work.
Requested by:	hsu
2002-05-31 11:52:35 +00:00
Seigo Tanimura
243917fe3b Lock down a socket, milestone 1.
o Add a mutex (sb_mtx) to struct sockbuf. This protects the data in a
  socket buffer. The mutex in the receive buffer also protects the data
  in struct socket.

o Determine the lock strategy for each members in struct socket.

o Lock down the following members:

  - so_count
  - so_options
  - so_linger
  - so_state

o Remove *_locked() socket APIs.  Make the following socket APIs
  touching the members above now require a locked socket:

 - sodisconnect()
 - soisconnected()
 - soisconnecting()
 - soisdisconnected()
 - soisdisconnecting()
 - sofree()
 - soref()
 - sorele()
 - sorwakeup()
 - sotryfree()
 - sowakeup()
 - sowwakeup()

Reviewed by:	alfred
2002-05-20 05:41:09 +00:00
Seigo Tanimura
960ed29c4b Revert the change of #includes in sys/filedesc.h and sys/socketvar.h.
Requested by:	bde

Since locking sigio_lock is usually followed by calling pgsigio(),
move the declaration of sigio_lock and the definitions of SIGIO_*() to
sys/signalvar.h.

While I am here, sort include files alphabetically, where possible.
2002-04-30 01:54:54 +00:00
John Baldwin
6008862bc2 Change callers of mtx_init() to pass in an appropriate lock type name. In
most cases NULL is passed, but in some cases such as network driver locks
(which use the MTX_NETWORK_LOCK macro) and UMA zone locks, a name is used.

Tested on:	i386, alpha, sparc64
2002-04-04 21:03:38 +00:00
Alfred Perlstein
96abb1618a Remove __P. 2002-03-20 02:39:27 +00:00
Peter Wemm
1dec39afe0 Fix warnings 2002-02-28 03:02:20 +00:00
Mike Smith
bedbd47e6a Initialise the intrq_present fields at runtime, not link time. This allows
us to load protocols at runtime, and avoids the use of common variables.

Also fix the ip6_intrq assignment so that it works at all.
2002-01-08 10:34:03 +00:00
Matthew Dillon
b1e4abd246 Give struct socket structures a ref counting interface similar to
vnodes.  This will hopefully serve as a base from which we can
expand the MP code.  We currently do not attempt to obtain any
mutex or SX locks, but the door is open to add them when we nail
down exactly how that part of it is going to work.
2001-11-17 03:07:11 +00:00
Bosko Milekic
406dd7d1d4 Change a couple of M_WAITOKs used in M_PREPEND() to M_TRYWAITs, which
is what they should be. As the returned mbuf is already checked for
failure of M_PREPEND even in the wait case, nothing more to be done
here.
2001-04-05 04:20:48 +00:00
Poul-Henning Kamp
fc2ffbe604 Mechanical change to use <sys/queue.h> macro API instead of
fondling implementation details.

Created with: sed(1)
Reviewed by: md5(1)
2001-02-04 13:13:25 +00:00
David Malone
7cc0979fd6 Convert more malloc+bzero to malloc+M_ZERO.
Submitted by:	josh@zipperup.org
Submitted by:	Robert Drehmel <robd@gmx.net>
2000-12-08 21:51:06 +00:00
Jonathan Lemon
df5e198723 Lock down the network interface queues. The queue mutex must be obtained
before adding/removing packets from the queue.  Also, the if_obytes and
if_omcasts fields should only be manipulated under protection of the mutex.

IF_ENQUEUE, IF_PREPEND, and IF_DEQUEUE perform all necessary locking on
the queue.  An IF_LOCK macro is provided, as well as the old (mutex-less)
versions of the macros in the form _IF_ENQUEUE, _IF_QFULL, for code which
needs them, but their use is discouraged.

Two new macros are introduced: IF_DRAIN() to drain a queue, and IF_HANDOFF,
which takes care of locking/enqueue, and also statistics updating/start
if necessary.
2000-11-25 07:35:38 +00:00
Jake Burkholder
e39756439c Back out the previous change to the queue(3) interface.
It was not discussed and should probably not happen.

Requested by:		msmith and others
2000-05-26 02:09:24 +00:00
Jake Burkholder
740a1973a6 Change the way that the queue(3) structures are declared; don't assume that
the type argument to *_HEAD and *_ENTRY is a struct.

Suggested by:	phk
Reviewed by:	phk
Approved by:	mdodd
2000-05-23 20:41:01 +00:00