Make the process of embedding MDROOT images less perilous by
makeing the target that links kernel and embedding the image
depend on the image. This means, if the image doesn't exist you
find out before you try to boot from it and that if you change
the image you don't have to touch some random source file to
cause a rebuild.
Don't hide that we're embedding the image.
packet delivery, always enqueue when possible. Also
correct the DEPLETED test as multiple bits might be
set. Thanks to Randall Stewart for the changes!
on the secondary side of a bridge will not be propagated to the primary
bus unless this is enabled. Busmastering is not enabled by default (we
have relied on firmware to set this bit to date). The OS needs to set it
for any bridges not configured by system firmware.
Tested by: Steve Polyack korvus comcast net
MFC after: 2 weeks
'fw_hdr_intfver' into an anonymous enum, which avoids a clang 3.2
warning about all the enum values being the same value.
Reviewed by: np
MFC after: 1 week
In rare event when fast and ithread interrupts share the same vector
and the fast handler was registered first, we can end up trying to
schedule the ithread that is not created yet. The kernel built with
INVARIANTS then triggers an assertion.
Change the order to create the ithread first and only then add the
handler that needs it to the interrupt event handlers list.
Reviewed by: jhb
(SYSBEGIN/SYSEND are specific to ipfw/dummynet and are used to
emulate sysctl on platforms that do not have them, and they work
by creating an array which contains all the sysctl-ed symbols.)
When issuing a non-DMA command, make sure to set the "remaining length of
command to be transferred via DMA" (sc_cmdlen) to zero up-front, otherwise
we might get confused on command competition interrupt (no DMA active but
still data left to transfer).
- Implement handling of MSG_IGN_WIDE_RESIDUE which some targets produce, as
just rejecting these leads to a resend and disconnect loop.
Reported and tested by: mjacob
MFC after: 3 days
callout_deactivate(), so if INP_DROPPED is set we return with the
timer active flag cleared.
For me this fixes negative keep timer values reported by `netstat -x'
for connections in CLOSE state.
Approved by: net (silence)
MFC after: 2 weeks
to pull vm_param.h was removed. Other big dependency of vm_page.h on
vm_param.h are PA_LOCK* definitions, which are only needed for
in-kernel code, because modules use KBI-safe functions to lock the
pages.
Stop including vm_param.h into vm_page.h. Include vm_param.h
explicitely for the kernel code which needs it.
Suggested and reviewed by: alc
MFC after: 2 weeks
It uses new API from the part.c to work with partition tables.
Update userboot's disk driver to use new API. Note that struct
loader_callbacks_v1 has changed.
that the wrong UART reference clock will be used for a few of the IDs.
It is currently not possible to figure that out because the Linux FTDI
driver detects this run-time and not compile time based on the bcdDevice
field of the USB device descriptor. Some of the ID's in usbdevs are not
sorted according to the product ID value. Please feel free to fix this.
I'm out of my xemacs magic today.
This syncronises us with the linux kernel at kernel.org (HEAD).
MFC after: 2 weeks
array, similar to what filltxdesc() uses.
This removes the last reference to ds_data in the TX path outside of
debugging statements. These need to be adjusted/fixed.
Tested:
* AR9280 STA/AP with iperf TCP traffic
The existing API only exposes 'seglen' (the current buffer (segment) length)
with the data buffer pointer set in 'ds_data'. This is fine for the legacy
DMA engine but it won't work for the EDMA engines.
The EDMA engine has a significantly different TX descriptor layout.
* The legacy DMA engine had a ds_data pointer at the same offset in the
descriptor for both TX and RX buffers;
* The EDMA engine has no ds_data for RX - the data is DMAed after the
descriptor;
* The EDMA engine has support for 4 TX buffer/segment pairs in the TX
DMA descriptor;
* The EDMA TX completion is in a different FIFO, and the driver will
'link' the status completion entry to a QCU by a "QCU ID".
I don't know why it's just not filled in by the hardware, alas.
So given that, here are the changes:
* Instead of directly fondling 'ds_data' in ath_desc, change the
ath_hal_filltxdesc() to take an array of buffer pointers as well
as segment len pointers;
* The EDMA TX completion status wants a descriptor and queue id.
This (for now) uses bf_state.bfs_txq and will extract the hardware QCU
ID from that.
* .. and this is ugly and wasteful; it should change to just store
the QCU in the bf_state and save 3/7 bytes in the process.
Now, the weird crap:
* The aggregate TX path was using bf_state->bfs_txq for the TXQ, rather than
taking a function argument. I've tidied that up.
* The multicast queue frames get put on a software TXQ and then that is
appended to the hardware CABQ when appropriate. So for now, make sure
that bf_state->bfs_txq points at the CABQ when adding frames to the
multicast queue.
* .. but the multicast queue TX path for now doesn't use the software
queue and instead
(a) directly sets up the descriptor contents at that point;
(b) the frames on the vap->avp_mcastq are then just appended wholesale
to the CABQ.
So for now, I don't have to worry about making the multicast path
work with aggregation or the per-TID software queue. Phew.
What's left to do:
* I need to modify the 11n ath_hal_chaintxdesc() API to do the same.
I'll do that in a subsequent commit.
* Remove bf_state.bfs_txq entirely and store the QCU as appropriate.
* .. then do the runtime "is this going on the right HWQ?" checks using
that, rather than comparing pointer values.
Tested on:
* AR9280 STA/AP
* AR5416 STA/AP
Use the interface number from the USB interface descriptor
like in the other USB serial drivers. These numbers are not
supposed to be different, though in theory they can. Make sure
that the driver then uses the interface number given by the USB
descriptor, and not the logical index of the USB stack.
For the future:
Whenever the term "index" is used in the USB code, it refers to
a number computed by the USB stack.
Whenever the term "number" is used in the USB code, it refers to
a number in a USB descriptor.
MFC after: 2 weeks
vm_page oflags by providing helper function
vm_page_readahead_finish(), which handles completed reads for pages
with indexes other then the requested one, for VOP_GETPAGES().
Reviewed by: alc
MFC after: 1 week
support for only the first port, but the CP2105 can have multiple ports.
Although this allowed the first port to mostly work on multi port devices,
there could be issues with this arrangement.
Update the man page to reflect support for both ports and the CP2105.
Many thanks to Silicon Labs (www.silabs.com) for providing a CP2105-EK
dev board for testing.
MFC after: 2 weeks
Fix an issue related to old periodic timers. The code in kern_clocksource.c
uses interrupt to keep track of time, and this time may not match with
binuptime(). In order to address such incoherency, switch periodic timers
to binuptime().
Except further calloutng it is needed for already present cyclic subsystem.
