These are hardware configuration options which are required in
the linux/openwrt device trees for the IPQ4018/IPQ4019 devices.
Since this isn't obtained from linux upstream but instead from
openwrt, this can't go in contrib; instead it is going in
sys/dts/include/ .
Obtained from: OpenWRT
Tested:
* IPQ4019 ASUS RT-AC58U AP, initial bootstrapping
This function was originally carved out of in6_pcbbind(), which
is in in6_pcb.c. This function also uses KPI private to the PCB
database - in_pcb_lport().
Add necessary bits to detect ELF format on Linux/aarch64; note that
Linux calls it aarch64 where we would typically call it arm64 (uname -m)
Reviewed by: arichardson, emaste, imp
Sponsored by: Ampere Computing LLC
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D32542
Link against the ssh-sk-helper client rather than the sk internal
implementation.
PR: 258384
Tested by: madpilot
Fixes: f448c3ed4a ("openssh: Add new source files to libssl")
Fixes: 19261079b7 ("openssh: update to OpenSSH v8.7p1")
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32529
Note, this breaks compatibility with snapshots generated by older builds
of bhyve(8).
Fixes: 7fa2335347 ("bhyve: Map the MSI-X table unconditionally for passthrough")
Reported by: Greg V <greg@unrelenting.technology>
Reviewed by: grehan, bz
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32523
Timecounter registration is dynamic, i.e., there is no requirement that
timecounters must be registered during single-threaded boot. Loadable
drivers may in principle register timecounters (which can be switched to
automatically). Timecounters cannot be unregistered, though this could
be implemented.
Registered timecounters belong to a global linked list. Add a mutex to
synchronize insertions and the traversals done by (mpsafe) sysctl
handlers. No functional change intended.
Reviewed by: imp, kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32511
Add a SIG_FOREACH macro that can be used to iterate over a signal set.
This is a bit cleaner and more efficient than calling sig_ffs() in a
loop. The implementation is based on BIT_FOREACH_ISSET(), except
that the bitset limbs are always 32 bits wide, and signal sets are
1-indexed rather than 0-indexed like bitset(9) sets.
issignal() cannot really be modified to use SIG_FOREACH() directly.
Take this opportunity to split the function into two explicit loops.
I've always found this function hard to read and think that this change
is an improvement.
Remove sig_ffs(), nothing uses it now.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32473
This implementation is faster and doesn't modify the cpuset, so it lets
us avoid some unnecessary copying as well. No functional change
intended.
This is a re-application of commit
9068f6ea69.
Reviewed by: cem, kib, jhb
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32029
Eliminate the nested loops and re-implement following a suggestion from
rlibby.
Add some simple regression tests.
Reviewed by: rlibby, kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32472
The condition added in commit 5bdb8b273a excludes plain SHA
transforms, so for such sessions crypto operations would return
incorrect results.
Fixes: 5bdb8b273a ("safexcel: Maintain per-session context records")
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
The root page is not zeroed at allocation time since with 4-level tables
each entry is copied from a template. However, with 5-level tables only
a single entry is filled, so the rest need to be cleared.
Reported by: alc
Reviewed by: alc, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32525
This patch modifies the function that does the Close RPC (nfsrpc_closerpc)
so that it does not use the open_owner (nfso_own) for NFSv4.1/4.2.
Use of the seqid in the open_owner structure is only needed for NFSv4.0.
Same applies to a NFSERR_STALESTATEID reply, which should only happen
for NFSv4.0. This allows nfsrpc_closerpc() to be called when nfso_own
is no longer valid. This, in turn, allows nfsrpc_closerpc() to be called
after the shared lock on the clientID is released, for NFSv4.1/4.2.
This is being done to prepare the code for a future patch that fixes
the case where an NFSv4.1/4.2 server replies NFSERR_DELAY to a Close
operation.
MFC after: 2 week
In cases such as daemons launched via limits(1), a process may call
exec multiple times; the last name of the last binary executed is
usually (always?) more informative.
Fixes: 46dd801acb Add userland boot profiling to TSLOG
Sponsored by: https://www.patreon.com/cperciva
Linux KPIs like pci_resource_start/len assume that BARs have been
allocated, but FreeBSD lazily allocates BARs if it cannot allocate the
firmware-allocated BARs. Thus using the Linux KPIs must force allocation
of the BARs rather than returning 0 for the start and length, which can
crash drm-kmod drivers that assume the BARs are valid. This is needed
for the AMDGPU driver to be able to attach on SiFive's HiFive Unmatched.
Reviewed by: hselasky, jhb, mav
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D32447
Now that riscv implements pmap_mapdev_attr we can enable the non-stub
implementation for riscv, which is needed for drm-kmod to not fail at
run time for drivers that need to map I/O regions.
Reviewed by: hselasky, bz
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D32446
This is needed for LinuxKPI's _ioremap_attr. This reuses the generic
implementation introduced for aarch64, and itself requires implementing
pmap_kenter, which is trivial to do given riscv currently treats all
mapping attributes the same due to the Svpbmt extension not yet being
ratified and in hardware.
Reviewed by: markj, mhorne
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D32445
Make vmdaemon timeout configurable, so that one can adjust
how often it runs.
Here's a trick: set this to 1, then run 'limits -m 0 sh',
then run whatever you want with 'ktrace -it XXX', and observe
how the working set changes over time.
Reviewed By: kib
Sponsored By: EPSRC
Differential Revision: https://reviews.freebsd.org/D22038
This ratelimits the "unsupported getsockopt level 6 optname 11"
warnings that happen all the time when watching Netflix.
Sponsored By: EPSRC
Differential Revision: https://reviews.freebsd.org/D32454
PIE and shared objects usually have many relative relocations. In
2017/2018, a compact relative relocation format RELR was proposed on
https://groups.google.com/g/generic-abi/c/bX460iggiKg/m/GxjM0L-PBAAJ
("Proposal for a new section type SHT_RELR") and is a pre-standard.
RELR usually takes 3% or smaller space than R_*_RELATIVE relocations.
The virtual memory size of a mostly statically linked PIE is typically
5~10% smaller.
ld.lld --pack-dyn-relocs=relr emits RELR relocations. DT_RELR has been
adopted by Android bionic, Linux kernel's arm64 port, Chrome OS (patched
glibc).
This patch adds DT_RELR support to FreeBSD rtld-elf.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D32524
For some traffic there might be no matching rule in the current ruleset,
for example when a state was imported via pfsync from a sytem with a
different ruleset checksum. In this case pf_route uses s->rt_addr for
routing target instead of r->rpool.cur but r->rpool is checked anyway,
resulting in dropped packets.
PR: 259183
Submitted by: Kajetan Staszkiewicz <vegeta tuxpowered.net>
Sponsored by: InnoGames GmbH
This patch moves release of the shared clientID lock from nfsrpc_close()
just after the nfscl_doclose() call to the end of nfscl_doclose() call.
This does make the code cleaner, since the shared lock is acquired at
the beginning of nfscl_doclose(). The only semantics change is that
the code no longer drops and reaquires the NFSCLSTATELOCK() mutex,
which I do not believe will have a negative effect on the NFSv4 client.
This is being done to prepare the code for a future patch that fixes
the case where an NFSv4.1/4.2 server replies NFSERR_DELAY to a Close
operation.
MFC after: 2 week
In some configurations (e.g. powerpc64) the llvm-readobj tool also needs
contrib/llvm-project/llvm/BinaryFormat/MsgPackWriter.cpp, so add it to
libllvm.
Reported by: Shawn Webb <shawn.webb@hardenedbsd.org>
Fixes: 1b85b68da0
This avoids spurious drop offs as EMPTY is passed regardless of the
actual path name.
Pushign the work inside the lookup instead of just ignorign the flag
allows avoid checking for empty pathname for all other lookups.
On kernels compiled with 'options TSLOG', record for each process ID:
* The timestamp of the fork() which creates it and the parent
process ID,
* The first path passed to execve(), if any,
* The first path resolved by namei, if any, and
* The timestamp of the exit() which terminates the process.
Expose this information via a new sysctl, debug.tslog_user.
On kernels lacking 'options TSLOG' (the default), no information is
recorded and the sysctl does not exist.
Note that recording namei is needed in order to obtain the names of
rc.d scripts being launched, as the rc system sources them in a
subshell rather than execing the scripts.
With this commit it is now possible to generate flamecharts of the
entire boot process from the start of the loader to the end of
/etc/rc. The code needed to perform this processing is currently
found in github: https://github.com/cperciva/freebsd-boot-profiling
Reviewed by: mhorne
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D32493
When a redirection/nat IP address is selected by pf_map_addr it is
logged with PF_DEBUG_MISC level. This one according to the manual means
"Generate debug messages for various errors". Selecting an IP address is
not an error, it's a normal function of pf for route-to, nat and some
other operations. Therefore PF_DEBUG_NOISY level should be choosen which
is means "Generate debug messages for common conditions".
PR: 259184
Submitted by: Kajetan Staszkiewicz <vegeta tuxpowered.net>
Sponsored by: InnoGames GmbH
Consider IP_MF flag when checking length of the UDP packet to
match the declared value.
Sponsored by: Sippy Software, Inc.
Differential Revision: https://reviews.freebsd.org/D32363
MFC after: 2 weeks
Test the $nr expansion in labels is correct, even if the optimiser
reduces the rule count.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D32489
