7 which corresponds to WSTATE_KMIX in OpenSolaris whenever calling into
it which totally screws us even when restoring %wstate afterwards as
spill/fill traps can happen while in OFW. The rather hackish OpenBSD
approach of just setting the equivalent of WSTATE_KERNEL to 7 also is
no option as we treat %wstate as a bit field. So in order to deal with
this problem actually implement spill/fill handlers for %wstate 7 which
just act as the WSTATE_KERNEL ones except of theoretically also handling
32-bit, turn off interrupts completely so we don't even take IPIs while
in OFW which should ensure we only take spill/fill traps at most and
restore %wstate after calling into OFW once we have taken over the trap
table. While at it, actually set WSTATE_{,PROM}_KMIX before calling into
OFW just like OpenSolaris does, which should at least help testing this
change on non-V1280.
- Remove comments referring to the %wstate usage in BSD/OS.
- Remove the no longer used RSF_ALIGN_RETRY macro.
- Correct some trap table addresses in comments.
- Ensure %wstate is set to WSTATE_KERNEL when taking over the trap table.
- Ensure PSTATE_AM is off when entering or exiting to OFW as well as that
interrupts are also completely off when exiting to OFW as the firmware
trap table shouldn't be used to handle our interrupts.
can actually use all of the available lockable entries of the tiny dTLB
for the kernel TSB. With this change the KVA space sizing happens to be
more in line with the MI one so up to at least 24GB machines KVA doesn't
need to be limited manually. This is just another stopgap though, the
real solution is to take advantage of ASI_ATOMIC_QUAD_LDD_PHYS on CPUs
providing it so we don't need to lock the kernel TSB pages into the dTLB
in the first place.
Scrt1_c.o was accidentally compiled with -DGCRT (profiling), like gcrt1_c.o.
This problem is i386-specific, the other architectures are OK.
If you have problems with PIE executables such as samba and cups leaving
behind gmon files, rebuild them after installing this change.
PR: ports/143924
Reviewed by: kib
MFC after: 3 days
rounding (impl. dep. #55), the SPARC JPS1 responsible for SPARC64 and
UltraSPARC processors defines that in all cases tinyness is detected
before rounding, therefore rounding up to the smallest normalised
number should set the underflow flag.
- If an infinite result is rounded down, the result should have an
exponent 1 less than the value for infinity.
PR: 144900
Submitted by: Peter Jeremy
MFC after: 3 days
provider names.
- Characters in range 0x01-0x1f except '\t', '\n', and '\r' are replaced
with '?'. Those characters are disallowed in XML.
- '&', '<', '>', '\'', '"' and characters in range 0x7f-0xff are
replaced with XML numeric character reference.
If the kern.geom.confxml sysctl provides invalid XML, libgeom
geom_xml2tree() fails and utilities using it do not work. Unsafe
characters are common in msdosfs and cd9660 labels.
PR: kern/104389
Submitted by: Doug Steinwand (original version)
Reviewed by: pjd
Discussed on: freebsd-geom
MFC after: 3 weeks
generally protected by the VM page queue mutex. Instead of extending the
table lock to cover the PVO heads, add some asserts that the page queue
mutex is in fact held. This fixes several LORs and possible deadlocks.
This also adds an optimization to moea64_kextract() useful for
direct-mapped quantities, like UMA buffers. Being able to use this from
inside UMA removes an additional LOR.
- aradford@amcc.com bounces.
- gad said to drop pkill(1) and ps(1).
- jmallett said to drop libufs.
- joerg said to drop fdc(4) and sppp(4)
Submitted by: linimon
Approved by: gad, jmallett, joerg (via linimon)
frequency. This counter can be accessed coherently from both cores.
Use this as the preferred timecounter for the SWARM kernels.
The CP0 COUNT register is unusable as the timecounter on SMP platforms because
the COUNT registers on different CPUs are not guaranteed to be in sync.
when sb_load64() returns.
Some 32-bit arithmetic operations (e.g. subu) have unpredicatable results
when operating on 64-bit registers that are not properly sign-extended.
mapped kseg0 region.
The basic idea is to use KVA from the kseg2 region for mapping page
table pages that lie beyond the direct mapped region.
The TLB miss handler can now recursively fault into the TLB invalid
handler if it dereferences a kseg2 page table page address that is not
in the TLB.
Tested by: JC (c.jayachandran@gmail.com)
Andrew Turner. The kernel supports the LN2410SBC evaluation board,
and likely others. These parts (or similar ones) are in some open
hardware designs for phones.
Submitted by: Andrew Turner
- Print the initial memory map when bootverbose is set.
- Change the page fault address format from linear to %cs:%ip style.
- Move duplicate code into a newly added function.
- Add strictly aligned memory access for distant future. ;-)
The order of operations is the following:
1. Try to open vdev by remembered path and guid.
2. If 1 failed, try to find vdev which guid matches and ignore the path.
3. If 2 failed this means either that the vdev we're looking for is gone
or that pool is being created and vdev doesn't contain proper guid yet.
To be able to handle pool creation we open vdev by path anyway.
Because of 3 it is possible that we open wrong vdev on import which can lead to
confusions.
The solution for this is to check spa_load_state. On pool creation it will be
equal to SPA_LOAD_NONE and we can open vdev only by path immediately and if it
is not equal to SPA_LOAD_NONE we first open by path+guid and when that fails,
we open by guid. We no longer open wrong vdev on import.
MFC after: 2 weeks
that provides the allocated and setup eventhandler entry.
Add a new wrapper for VIMAGE that allocates extra space to hold the
callback function and argument in addition to an extra wrapper function.
While the wrapper function goes as normal callback function the
argument points to the extra space allocated holding the original func
and arg that the wrapper function can then call.
Provide an iterator function for the virtual network stack (vnet) that
will call the callback function for each network stack.
Provide a new set of macros for VNET that in the non-VIMAGE case will
just call eventhandler_register() while in the VIMAGE case it will use
vimage_eventhandler_register() passing in the extra iterator function
but will only register once rather than per-vnet.
We need a special macro in case we are interested in the tag returned
as we must check for curvnet and can neither simply assign the
return value, nor not change it in the non-vnet0 case without that.
Sponsored by: ISPsystem
Discussed with: jhb
Reviewed by: zec (earlier version), jhb
MFC after: 1 month
Just comment out the atrun line instead of completely removing it. It is
not a bad idea to leave it as a reference in case someone decides to
install atrun by hand afterwards.
checksums as the base acpi(4) driver. This fixes a problem where the MADT
parser would reject the MADT table during early boot causing the MP Table
to be, but then the acpi(4) driver would attach and use non-SMP interrupt
routing.
Tested by: Alastair Hogge agh of coolrhaug com
MFC after: 1 week
sysv_{msg,sem,shm}.c files.
Mark SysV IPC freebsd32 syscalls as NOSTD and add required
SYSCALL_INIT_HELPER/SYSCALL32_INIT_HELPERs to provide auto
register/unregister on module load.
This makes COMPAT_FREEBSD32 functional with SysV IPC compiled and loaded
as modules.
Reviewed by: jhb
MFC after: 2 weeks
FOr SYSCALL32_MODULE_HELPER, use "sys32/<syscallname>" module name.
This avoids modules name conflict when compat32 syscall does not
need shims.
Note that SYSCALL_MODULE_HELPER is going to be unused in the tree by
several next commits.
Suggested by: jhb
MFC after: 2 weeks
