on by default.
The default is to wait after each counter is tested. Since the prompt
would go to stdout you won't see it if you're redirecting the output
of the executed sub-program to /dev/null, so just press return to
continue or Ctrl-D to stop.
The lang/gcc* ports patch headers where they think something is
non-standard. These patched headers override the system headers which means
you have to rebuild these ports whenever you do installworld to make sure
they contain the latest changes.
- Address performance regressions encountered by das@ by caching per-thread
data in TLS where available.
- Add a __NO_TLS flag to cdefs.h to indicate where not available.
- Reorganise the xlocale.h definitions into xlocale/*.h so that they can be
included from multiple places.
- Export the POSIX2008 subset of xlocale when POSIX2008 says it should be
exported, independently of whether xlocale.h is included.
- Fix the bug where programs using ctype functions always assumed ASCII unless
recompiled.
- Fix some style(9) violations.
Reviewed by: brooks (mentor)
Approved by: dim (mentor)
to a deadlock of an association when an IPv6 socket was used to
communcate with IPv4 and an ICMPv4 fragmentation needed message
was received.
While there, simplify the code a bit.
MFC after: 3 days.
return ifnet double pointer.
Pass that hint down to in6_selectif() to be used when i) the default FIB
is queried and ii) route lookup fails because the network is not present
(i.e. someone deleted the connected subnet).
This hint should not be generally used from anywhere outside the neighbor
discovery code. We just make use of it from nd6_ns_output().
Extend the nd6_na_output() interface by a nd6_na_output_fib() version
and pass the FIB number from the NS mbuf on to NA to allow the new mbuf
to inherit the FIB tag and a later lookup from ip6_output() to succeed
in the aformentioned example case.
Provide a wrapper function for the old public interface also used from
CARP but mark it with BURN_BRIDGES to cleanup in HEAD after MFC.
Sponsored by: Cisco Systems, Inc.
with SO_SETFIB to only tag the socket with the right FIB.
That way either setfib(1) or nc -V can be used depending on what wants to be
achieved. This also allows nc to be used for simple regression testing of
either feature.
Sponsored by: Cisco Systems, Inc.
1. Add new functionality to the force_depend method to incorporate the
tests for whether the service is enabled and/or already running.
2. Add a new option to bypass checking only that the service is enabled
at boot time, and always check if it is running.
3. Use this new functionality to greatly simplify the rc.d scripts that
use force_depend.
4. Add a force_depend for statd in lockd
5. Remove the check that either nfs_server or nfs_client is _enable'd
from statd and lockd. This was always overkill, and prevented using
the {one|force}start options, as well as stop'ing on the command line.
6. The yp* scripts had some of their arguments in various weird orders.
Bring them into line with the model.
7. If mountd fails to create /var/db/mountdtab, err out.
Ideas, suggestions, and/or review from delphij and jilles.
Pointy hats are completely my responsibility however.
MOD_SHUTDOWN is not an end of existence, and there is a life after it.
In particular, code previously called on MOD_SHUTDOWN grabbed lock and
deallocated unit numbering. That caused infinite wait loop if snd_uaudio
tried to destroy its PCM device after that point.
MFC after: 3 days
system and then execute a program with pmcstat in counting mode.
The program will verify that all counters fire and that the code neither
panics the system nor locks it up. This should be considered a first pass
conformance test for new sets of counters being added to hwpmc(4).
through by VMware so blacklist their PCI-PCI bridge for MSI/MSI-X here.
Note that besides currently there not being a quirk type that disables
MSI-X only and there's no evidence that MSI doesn't work with the VMware
pass-through, it's really questionable whether MSI generally works in
that setup as VMware only mention three know working devices [1, p. 4].
Also not that this quirk entry currently doesn't affect the devices
emulated by VMware in any way as these don't claim support MSI/MSI-X to
begin with. [2]
While at it, make the PCI quirk table const and static.
- Remove some duplicated empty lines.
- Use DEVMETHOD_END.
PR: 163812, http://forums.freebsd.org/showthread.php?t=27899 [2]
Reviewed by: jhb
MFC after: 3 days
txsync() and rxsync() callbacks, removing some variables made
useless by this change;
- add generic lock and irq handling routines. These can be useful
in case there are no driver locks that we can reuse;
- add a few macros to reduce differences with the Linux version.
Some older firmware versions have issues that can be worked around by
avoiding certain operations. Add a sysctl dev.aac.#.firmware_build to
make it easy for scripts or userland tools to detect the firmware
version.
- Revert unneeded whitespace changes.
- Revert modifications to loginrec.c, as the upstream version already
does the right thing.
- Fix indentation and whitespace of local changes.
Approved by: des
MFC after: 1 month
* Change the mesh IE size to be IEEE80211_MESH_CONF_SZ rather than the
size of the structure;
* conf_cap is now a uint8_t rather than a uint16_t (uint16_t in D3.0,
uint8_t in the amendment spec);
* Update mesh config capability bits - earlier bits were from draft X,
current is amendment spec;
* Update the following to be an enum rather than #define and added
a VENDOR entry too from the amendment spec;
IEEE80211_MESHCONF_PATH_*
IEEE80211_MESHCONF_METRIC_*
IEEE80211_MESHCONF_CC_*
IEEE80211_MESHCONF_SYNC_*
IEEE80211_MESHCONF_AUTH_*
* Kept IEEE80211_MESHCONF_FORM_* and IEEE80211_MESHCONF_CAP_* as
defines because they are defined in a way that we need to mask in/out
information;
* In IEEE80211_MESHCONF_CAP_* IEEE80211_MESHCONF_CAP_TBTTA is removed
and 0x80 is made reserved as defined in the amendment spec.
Submitted by: monthadar@gmail.com
Reviewed by: rpaulo
When performing a firmware upgrade via atacontrol[1] the subsequent
command may time out producing the error message above. When this
happens the callout could still be active, and the system would then
panic due to a destroyed semaphore.
Instead, ensure that the callout is done first, via callout_drain.
Note that this fix applies to the "old" ata(4) and so isn't applicable
to the default configuration in HEAD. It is still applicable to
stable/8.
[1] http://lists.freebsd.org/pipermail/freebsd-current/2012-January/031122.html
Submitted by: Nima Misaghian
Reviewed by: rstone, attilio, mav
Obtained from: SVOS
MFC after: 3 days
There are unfortunately a number of situations where vap->iv_bss is changed
or freed by some code in net80211. Because multiple threads can concurrently
be doing work (and the vap->iv_bss access isn't at all done behind any kind
of lock), it's quite possible that:
* a change will occur in one thread - eg, by a call through
ieee80211_sta_join1();
* a state change occurs in another thread - eg an RX is scheduled
in the ath tasklet and it calls ieee80211_input_mimo_all(), which
does dereference vap->iv_bss;
* these two executing concurrently, causing things to explode.
Another instance is ath_beacon_alloc() which takes an ieee80211_node *.
It's called with the vap->iv_bss node from ath_newstate(). If the node has
changed in the meantime (say it's been freed elsewhere) the reference
that it grabbed _before_ refcounting it may be stale.
I would _prefer_ that these sorts of things were serialised somewhere but
that may be a bit much to ask. Instead, the best we can (currently) hope
is that the underlying bss node is still (somewhat) valid.
There is a related PR (kern/164382) described by the first case above.
That should be fixed by properly serialising the RX path and reset path
so an RX can't occur at the same time as the vap free/shutdown path.
This is inspired by some related fixes in r212127.
PR: kern/165060
starting up before the previous script finishes. This prevents an
infinite number of them from piling up and slowing a system down.
Since all the refactoring to make this happen required churning the
indenting of most of this file, make the indentation more consistent.
Reviewed by: simon
MFC after: 1 week
The reasoning behind this, is that if we are consistent in our
documentation about the uint*_t stuff, people will be less tempted to
write new code that uses the non-standard types.
I am not going to bump the man page dates, as these changes can be
considered style nits. The meaning of the man pages is unaffected.
MFC after: 1 month
The main benefit is that watchdogd would shutdown after most of other
daemons/servers and thus, for example, would remedy a system hang caused
by unlucky X server shutdown.
Reviewed by: dougb (earlier version)
MFC after: 2 weeks
According to POSIX, -a is equal to -bdlprtTu. It seems this is not true
in practice, as -b normally restricts the output to BOOT_TIME entries
and all implementations that I know of don't.