should call uma_zfree() with various spinlock helds. Rearranging the
code would not help here because we cannot break atomicity respect
prcess spinlock, so the only one choice we have is to defer the operation.
In order to do this use a global queue synchronized through the kse_lock
spinlock which is freed at any thread_alloc() / thread_wait() through a
call to thread_reap().
Note that this approach is not ideal as we should want a per-process
list of zombie upcalls, but it follows initial guidelines of KSE authors.
Tested by: jkim, pav
Approved by: jeff, julian
Approved by: re
dangerous races.
Fix this problems adding correct locking for the members of 'struct
kse_upcall' and other struct proc/struct thread related members.
For the moment, just leave ku_mflag and ku_flags "lazy" locked.
While here, cleanup the code removing the function kse_GC() (unused),
and merging upcall_link(), upcall_unlink(), upcall_stash() in their
respective callers (static functions, very short and only called in one
place).
Reported by: pav
Tested by: pav (on some pointyhat cluster nodes)
Approved by: jeff
Approved by: re
Sponsorized by: NGX Italy (http://www.ngx.it)
- Remove unused kse fields from struct proc.
- Group remaining fields and #ifdef KSE them.
- Move some kern_kse.c only prototypes out of proc and into kern_kse.
Discussed with: Julian
- Add a count of exiting threads, p_exitthreads, to struct proc.
- Increment p_exithreads when we set the deadthread in thread_exit().
- When we thread_stash() a deadthread use an atomic to drop the count.
- Spin until the p_exithreads count reaches 0 in thread_wait().
- Lock the last exiting thread momentarily to be certain that it has
exited cpu_throw().
- Restructure thread_wait(). It does not need a loop as there will only
ever be one thread.
Tested by: moose@opera.com
Reported by: kris, moose@opera.com
- Unsafeness on ruadd() in thread_exit()
- Unatomicity of thread_exiit() in the exit1() operations
This patch addresses these problems allocating p_fd as part of the
process and modifying the way it is accessed.
A small chunk of this patch, resolves a race about p_state in kern_wait(),
since we have to be sure about the zombif-ing process.
Submitted by: jeff
Approved by: jeff (mentor)
- Use thread_lock() rather than sched_lock for per-thread scheduling
sychronization.
- Use the per-process spinlock rather than the sched_lock for per-process
scheduling synchronization.
- Move some common code into thread_suspend_switch() to handle the
mechanics of suspending a thread. The locking here is incredibly
convoluted and should be simplified.
Tested by: kris, current@
Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc.
Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
Now, we assume no more sched_lock protection for some of them and use the
distribuited loads method for vmmeter (distribuited through CPUs).
Reviewed by: alc, bde
Approved by: jeff (mentor)
td_ru. This removes the requirement for per-process synchronization in
statclock() and mi_switch(). This was previously supported by
sched_lock which is going away. All modifications to rusage are now
done in the context of the owning thread. reads proceed without locks.
- Aggregate exiting threads rusage in thread_exit() such that the exiting
thread's rusage is not lost.
- Provide a new routine, rufetch() to fetch an aggregate of all rusage
structures from all threads in a process. This routine must be used
in any place requiring a rusage from a process prior to it's exit. The
exited process's rusage is still available via p_ru.
- Aggregate tick statistics only on demand via rufetch() or when a thread
exits. Tick statistics are kept in the thread and protected by sched_lock
until it exits.
Initial patch by: attilio
Reviewed by: attilio, bde (some objections), arch (mostly silent)
Probabilly, a general approach is not the better solution here, so we should
solve the sched_lock protection problems separately.
Requested by: alc
Approved by: jeff (mentor)
vmcnts. This can be used to abstract away pcpu details but also changes
to use atomics for all counters now. This means sched lock is no longer
responsible for protecting counts in the switch routines.
Contributed by: Attilio Rao <attilio@FreeBSD.org>
always 0. Previously we aligned threads on a minimum of 8-byte boundaries.
Note: This changes the uma zone to no longer cache align threads. We
really want the uma zone to do align threads to MAX(16, cache line size)
but there currently isn't a good way to express that to uma.
Submitted by: attilio
GETATTRs being generated - one from lookup()/namei() and the other
from nfs_open() (for cto consistency). This change eliminates the
GETATTR in nfs_open() if an otw GETATTR was done from the namei()
path. Instead of extending the vop interface, we timestamp each attr
load, and use this to detect whether a GETATTR was done from namei()
for this syscall. Introduces a thread-local variable that counts the
syscalls made by the thread and uses <pid, tid, thread syscalls> as
the attrload timestamp. Thanks to jhb@ and peter@ for a discussion on
thread state that could be used as the timestamp with minimal overhead.
Make part of John Birrell's KSE patch permanent..
Specifically, remove:
Any reference of the ksegrp structure. This feature was
never fully utilised and made things overly complicated.
All code in the scheduler that tried to make threaded programs
fair to unthreaded programs. Libpthread processes will already
do this to some extent and libthr processes already disable it.
Also:
Since this makes such a big change to the scheduler(s), take the opportunity
to rename some structures and elements that had to be moved anyhow.
This makes the code a lot more readable.
The ULE scheduler compiles again but I have no idea if it works.
The 4bsd scheduler still reqires a little cleaning and some functions that now do
ALMOST nothing will go away, but I thought I'd do that as a separate commit.
Tested by David Xu, and Dan Eischen using libthr and libpthread.
mutex structure is added as following:
struct umutex {
__lwpid_t m_owner;
uint32_t m_flags;
uint32_t m_ceilings[2];
uint32_t m_spare[4];
};
The m_owner represents owner thread, it is a thread id, in non-contested
case, userland can simply use atomic_cmpset_int to lock the mutex, if the
mutex is contested, high order bit will be set, and userland should do locking
and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents
pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel
should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is
pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner
to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure
and kernel syscall should be invoked to do locking, this becauses
for such a mutex, kernel should always boost the thread's priority before
it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex,
the first element is used to boost thread's priority when it locked the mutex,
second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT
mutex's link list is kept in userland, the m_ceiling[1] is managed by thread
library so kernel needn't allocate memory to keep the link list, when such
a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED.
Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process
shared, if the flag is not set, it saves a vm_map_lookup() call.
The umtx chain is still used as a sleep queue, when a thread is blocked on
PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority
propagating, it is dynamically allocated and reference count is used,
it is not optimized but works well in my tests, while the umtx chain has
its own locking protocol, the priority propagating protocol are all protected
by sched_lock because priority propagating function is called with sched_lock
held from scheduler.
No visible performance degradation is found which these changes. Some parameter
names in _umtx_op syscall are renamed.
suspension code. When a thread A is going to sleep, it calls
sleepq_catch_signals() to detect any pending signals or thread
suspension request, if nothing happens, it returns without
holding process lock or scheduler lock, this opens a race
window which allows thread B to come in and do process
suspension work, however since A is still at running state,
thread B can do nothing to A, thread A continues, and puts
itself into actually sleeping state, but B has never seen it,
and it sits there forever until B is woken up by other threads
sometimes later(this can be very long delay or never
happen). Fix this bug by forcing sleepq_catch_signals to
return with scheduler lock held.
Fix sleepq_abort() by passing it an interrupted code, previously,
it worked as wakeup_one(), and the interruption can not be
identified correctly by sleep queue code when the sleeping
thread is resumed.
Let thread_suspend_check() returns EINTR or ERESTART, so sleep
queue no longer has to use SIGSTOP as a hack to build a return
value.
Reviewed by: jhb
MFC after: 1 week
remote CPU. While here, abstract thread suspension code into a function
called sig_suspend_threads, the function is called when a process received
a STOP signal.
audit thread exit, but should that happen, this will prevent
unhappiness, as the thread exit system call will never return, and
hence not commit the record.
Pointed out by/with: cognet
Obtained from: TrustedBSD Project
This should not happen, but with this assert, brueffer and I would
not have spent 45 minutes trying to figure out why he wasn't
seeing audit records with the audit version in CVS.
Obtained from: TrustedBSD Project
- td_ar to struct thread, which holds the in-progress audit record during
a system call.
- p_au to struct proc, which holds per-process audit state, such as the
audit identifier, audit terminal, and process audit masks.
In the earlier implementation, td_ar was added to the zero'd section of
struct thread. In order to facilitate merging to RELENG_6, it has been
moved to the end of the data structure, requiring explicit
initalization in the thread constructor.
Much help from: wsalamon
Obtained from: TrustedBSD Project
For each child process whose status has been changed, a SIGCHLD instance
is queued, if the signal is stilling pending, and process changed status
several times, signal information is updated to reflect latest process
status. If wait() returns because the status of a child process is
available, pending SIGCHLD signal associated with the child process is
discarded. Any other pending SIGCHLD signals remain pending.
The signal information is allocated at the same time when proc structure
is allocated, if process signal queue is fully filled or there is a memory
shortage, it can still send the signal to process.
There is a booting time tunable kern.sigqueue.queue_sigchild which
can control the behavior, setting it to zero disables the SIGCHLD queueing
feature, the tunable will be removed if the function is proved that it is
stable enough.
Tested on: i386 (SMP and UP)
clock are supported. I have plan to merge XSI timer ITIMER_REAL and other
two CPU timers into the new code, current three slots are available for
the XSI timers.
The SIGEV_THREAD notification type is not supported yet because our
sigevent struct lacks of two member fields:
sigev_notify_function
sigev_notify_attributes
I have found the sigevent is used in AIO, so I won't add the two members
unless the AIO code is adjusted.
changes in MD code are trivial, before this change, trapsignal and
sendsig use discrete parameters, now they uses member fields of
ksiginfo_t structure. For sendsig, this change allows us to pass
POSIX realtime signal value to user code.
2. Remove cpu_thread_siginfo, it is no longer needed because we now always
generate ksiginfo_t data and feed it to libpthread.
3. Add p_sigqueue to proc structure to hold shared signals which were
blocked by all threads in the proc.
4. Add td_sigqueue to thread structure to hold all signals delivered to
thread.
5. i386 and amd64 now return POSIX standard si_code, other arches will
be fixed.
6. In this sigqueue implementation, pending signal set is kept as before,
an extra siginfo list holds additional siginfo_t data for signals.
kernel code uses psignal() still behavior as before, it won't be failed
even under memory pressure, only exception is when deleting a signal,
we should call sigqueue_delete to remove signal from sigqueue but
not SIGDELSET. Current there is no kernel code will deliver a signal
with additional data, so kernel should be as stable as before,
a ksiginfo can carry more information, for example, allow signal to
be delivered but throw away siginfo data if memory is not enough.
SIGKILL and SIGSTOP have fast path in sigqueue_add, because they can
not be caught or masked.
The sigqueue() syscall allows user code to queue a signal to target
process, if resource is unavailable, EAGAIN will be returned as
specification said.
Just before thread exits, signal queue memory will be freed by
sigqueue_flush.
Current, all signals are allowed to be queued, not only realtime signals.
Earlier patch reviewed by: jhb, deischen
Tested on: i386, amd64
in other codes. Add cpu_set_user_tls, use it to tweak user register
and setup user TLS. I ever wanted to merge it into cpu_set_kse_upcall,
but since cpu_set_kse_upcall is also used by M:N threads which may
not need this feature, so I wrote a separated cpu_set_user_tls.
all other threads to suicide, problem is execve() could be failed, and
a failed execve() would change threaded process to unthreaded, this side
effect is unexpected.
The new code introduces a new single threading mode SINGLE_BOUNDARY, in
the mode, all threads should suspend themself at user boundary except
the singler. we can not use SINGLE_NO_EXIT because we want to start from
a clean state if execve() is successful, suspending other threads at unknown
point and later resuming them from there and forcing them to exit at user
boundary may cause the process to start from a dirty state. If execve() is
successful, current thread upgrades to SINGLE_EXIT mode and forces other
threads to suicide at user boundary, otherwise, other threads will be resumed
and their interrupted syscall will be restarted.
Reviewed by: julian
