Commit Graph

34 Commits

Author SHA1 Message Date
Warner Losh
60727d8b86 /* -> /*- for license, minor formatting changes 2005-01-07 02:29:27 +00:00
Tom Rhodes
acad338196 Fix paths after repocopies done by scottl
Reviewed by:	marius
OK'ed by:	scottl
2004-11-10 14:09:52 +00:00
Marius Strobl
26280d88d7 - Introduce an ofw_bus kobj-interface for retrieving the OFW node and a
subset ("compatible", "device_type", "model" and "name") of the standard
  properties in drivers for devices on Open Firmware supported busses. The
  standard properties "reg", "interrupts" und "address" are not covered by
  this interface because they are only of interest in the respective bridge
  code. There's a remaining standard property "status" which is unclear how
  to support properly but which also isn't used in FreeBSD at present.
  This ofw_bus kobj-interface allows to replace the various (ebus_get_node(),
  ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type()
  vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one.
  This in turn allows to simplify and remove code-duplication in drivers for
  devices that can hang off of more than one OFW supported bus.
- Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the
  drivers for their children to use the ofw_bus kobj-interface. The IVAR-
  interfaces of the Central, EBus and FHC are entirely replaced by this. The
  PCI bus driver used its own kobj-interface and now also uses the ofw_bus
  one. The IVARs special to the SBus, e.g. for retrieving the burst size,
  remain.
  Beware: this causes an ABI-breakage for modules of drivers which used the
  IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be
  recompiled.
  The style-inconsistencies introduced in some of the bus drivers will be
  fixed by tmm@ in a generic clean-up of the respective drivers later (he
  requested to add the changes in the "new" style).
- Convert the powerpc MacIO bus driver and the drivers for its children to
  use the ofw_bus kobj-interface. This invloves removing the IVARs related
  to the "reg" property which were unused and a leftover from the NetBSD
  origini of the code. There's no ABI-breakage caused by this because none
  of these driver are currently built as modules.
  There are other powerpc bus drivers which can be converted to the ofw_bus
  kobj-interface, e.g. the PCI bus driver, which should be done together
  with converting powerpc to use the OFW PCI code from sparc64.
- Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take
  advantage of the ofw_bus kobj-interface and simplify them a bit.

Reviewed by:	grehan, tmm
Approved by:	re (scottl)
Discussed with:	tmm
Tested with:	Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
Warner Losh
48375ebec9 These don't need RMAN_RESOURCE_VISIBLE now that rman is visible 2004-07-03 20:56:16 +00:00
Marius Strobl
4eae91a8f7 These need __RMAN_RESOURCE_VISIBLE, too. 2004-06-30 23:21:07 +00:00
Scott Long
c31d0cf77b Port the NetBSD esp(4) driver. This only includes the sbus front-end, so
its primary use is for the FEPS/FAS366 SCSI found in Sun Ultra 1e and 2
machines.  Once the pci front-end is ported, this driver can replace the
amd(4) driver.

The code as-is is fairly stable.  I've disabled tagged-queueing until I can
figure out a corruption bug related to it.  I'm importing it now so that
people with these machines can (finally) stop netbooting and report bugs
before 5.3.
2004-06-10 05:11:39 +00:00
Poul-Henning Kamp
6b2f1cf005 Add missing <sys/module.h> #includes 2004-06-04 11:52:25 +00:00
Warner Losh
2fcbca0d85 Remove advertising clause from University of California Regent's
license, per letter dated July 22, 1999 and email from Peter Wemm,
Alan Cox and Robert Watson.

Approved by: core, peter, alc, rwatson
2004-04-07 05:00:01 +00:00
Thomas Moestl
38c174739c The compatibility specification property is named "compatible", not
"compat".

Spotted by:	Marius Strobl <marius@alchemy.franken.de>
2004-03-27 22:39:47 +00:00
David E. O'Brien
f01ac8a3dd Don't confuse NULL with 0. 2003-12-26 14:22:26 +00:00
Warner Losh
3d11ce04c6 s=include <ofw/=include <dev/ofw/= to reflect removal of -I$S/dev 2003-08-23 00:11:16 +00:00
Scott Long
f6b1c44d1f Mega busdma API commit.
Add two new arguments to bus_dma_tag_create(): lockfunc and lockfuncarg.
Lockfunc allows a driver to provide a function for managing its locking
semantics while using busdma.  At the moment, this is used for the
asynchronous busdma_swi and callback mechanism.  Two lockfunc implementations
are provided: busdma_lock_mutex() performs standard mutex operations on the
mutex that is specified from lockfuncarg.  dftl_lock() is a panic
implementation and is defaulted to when NULL, NULL are passed to
bus_dma_tag_create().  The only time that NULL, NULL should ever be used is
when the driver ensures that bus_dmamap_load() will not be deferred.
Drivers that do not provide their own locking can pass
busdma_lock_mutex,&Giant args in order to preserve the former behaviour.

sparc64 and powerpc do not provide real busdma_swi functions, so this is
largely a noop on those platforms.  The busdma_swi on is64 is not properly
locked yet, so warnings will be emitted on this platform when busdma
callback deferrals happen.

If anyone gets panics or warnings from dflt_lock() being called, please
let me know right away.

Reviewed by:	tmm, gibbs
2003-07-01 15:52:06 +00:00
Thomas Moestl
6d3b2a3cad Further cleanup of the sparc64 busdma implementation:
- Move prototypes for sparc64-specific helper functions from bus.h to
  bus_private.h
- Move the method pointers from struct bus_dma_tag into a separate
  structure; this saves some memory, and allows to use a single method
  table for each busdma backend, so that the bus drivers need no longer
  be changed if the methods tables need to be modified.
- Remove the hierarchical tag method lookup. It was never really useful,
  since the layering is fixed, and the current implementations do not
  need to call into parent implementations anyway. Each tag inherits
  its method table pointer and cookie from the parent (or the root tag)
  now, and the method wrapper macros directly use the method table
  of the tag.
- Add a method table to the non-IOMMU backend, remove unnecessary
  prototypes, remove the extra parent tag argument.
- Rename sparc64_dmamem_alloc_map() and sparc64_dmamem_free_map() to
  sparc64_dma_alloc_map() and sparc64_dma_free_map(), move them to a
  better place and use them for all map allocations and deallocations.
- Add a method table to the iommu backend, and staticize functions,
  remove the extra parent tag argument.
- Change the psycho and sbus drivers to just set cookie and method table
  in the root tag.
- Miscellaneous small fixes.
2003-06-18 16:41:36 +00:00
Thomas Moestl
ad9d5b934b Remove the psycho and sbus iommu function stubs, and put the pointer
to the iommu_state structure directly into dt_cookie. The stubs have
not been needed for a long time now.
2003-06-11 20:30:52 +00:00
Scott Long
7e71df9339 Bring back bus_dmasync_op_t. It is now a typedef to an int, though the
BUS_DMASYNC_ definitions remain as before.  The does not change the ABI,
and reverts the API to be a bit more compatible and flexible.  This has
survived a full 'make universe'.

Approved by:	re (bmah)
2003-05-27 04:59:59 +00:00
Scott Long
c87d464f28 De-orbit bus_dmamem_alloc_size(). It's a hack and was never used anyways.
No need for it to pollute the 5.x API any further.

Approved by:	re (bmah)
2003-05-26 04:00:52 +00:00
Thomas Moestl
8a85ba6c7e - Reduce the DVMA preallocation limit from 128kB to 32kB. 128kB were
quite excessive, and caused the available space to be used up too
  easily. The new limit should be a better estimation of how much the
  caller will need at most.
- Double the IOTSB size 64kB, for a DVMA area size of 64MB.

This should fix DMA problems on e450s and other large machines due
to DVMA space exhaustion, which were introduced in my last IOMMU
code revision in January.

Reported and tested by:	fenner
2003-05-02 01:21:37 +00:00
Hidetoshi Shimokawa
8b8d5d06d1 fix typo in the previous commit. 2003-04-12 06:43:28 +00:00
Maxime Henrion
141bacb048 Change the operation parameter of bus_dmamap_sync() from an
enum to an int and redefine the BUS_DMASYNC_* constants as
flags.  This allows us to specify several operations in one
call to bus_dmamap_sync() as in NetBSD.
2003-04-10 23:03:33 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Scott Long
c07f24ca0c Fix some more missing dt_ prefixes for dma tag fields. 2003-01-29 17:41:29 +00:00
Scott Long
5193a34646 Implement bus_dmamem_alloc_size() and bus_dmamem_free_size() as
counterparts to bus_dmamem_alloc() and bus_dmamem_free().  This allows
the caller to specify the size of the allocation instead of it defaulting
to the max_size field of the busdma tag.

This is intended to aid in converting drivers to busdma.  Lots of
hardware cannot understand scatter/gather lists, which forces the
driver to copy the i/o buffers to a single contiguous region
before sending it to the hardware.  Without these new methods, this
would require a new busdma tag for each operation, or a complex
internal allocator/cache for each driver.

Allocations greater than PAGE_SIZE are rounded up to the next
PAGE_SIZE by contigmalloc(), so this is not suitable for multiple
static allocations that would be better served by a single
fixed-length subdivided allocation.

Reviewed by:	jake (sparc64)
2003-01-29 07:25:27 +00:00
Alfred Perlstein
44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
Thomas Moestl
fe461235a2 Change the iommu code to be able to handle more than one DVMA area per
map. Use this new feature to implement iommu_dvmamap_load_mbuf() and
iommu_dvmamap_load_uio() functions in terms of a new helper function,
iommu_dvmamap_load_buffer(). Reimplement the iommu_dvmamap_load()
to use it, too.
This requires some changes to the map format; in addition to that,
remove unused or redundant members.
Add SBus and Psycho wrappers for the new functions, and make them
available through the respective DMA tags.
2003-01-06 21:59:54 +00:00
Thomas Moestl
0415010cbd Bump the IOMMU TSB size to 32kB, to match the default size on PCI
systems.
2003-01-06 19:48:31 +00:00
Thomas Moestl
08707f05a0 Prefix the members of struct bus_space_tag and struct bus_dma_tag with
a uniqifier. No functional changes.
2003-01-06 19:43:10 +00:00
Thomas Moestl
7bee014426 1.) fix a copy-and-paste-o in a panic() message
2.) pass the requesting child device (instead of the bus one) up when
    handling interrupt resources
3.) remeber to mark the resource list entry as unused in
    sbus_release_resource().

Reported by:	scottl (3)
2003-01-06 16:36:05 +00:00
Thomas Moestl
f57d04ab1d Always initialize the UPA target module id in the interrupt mapping
register to the one of the processor doing the interrupt setup. This
is required since this field is preinitialized to 0, but there exist
machines which have no processor with a MID of 0 (e.g. e450s with 1 or 2
processors).

Add some more macros for handle the interrupt mapping registers, and
rename some existing ones for consistency.

Approved by:	re
2002-12-01 23:30:26 +00:00
Thomas Moestl
bb4c2b1298 Remove some long-dead cruft in the interrupt handling code which was
never used in FreeBSD.

Approved by:	re
2002-12-01 23:13:59 +00:00
Maxime Henrion
44b4810fbe Typo fix.
Reviewed by:	tmm
2002-08-19 22:57:32 +00:00
Matt Jacob
1936600631 Set interrupt clear pointer for SBus slots to point to correct spot. 2002-07-25 20:14:59 +00:00
Thomas Moestl
f42d907165 When multiple IOMMUs are present in a system, use a single TSB for all
of them, and couple them by always performing all operations on all
present IOMMUs. This is required because with the current API there
is no way to determine on which bus a busdma operation is performed.

While being there, clean up the iommu code a bit.

This should be a step in the direction of allow some of larger machines
to work; tests have shown that there still seem to be problems left.
2002-07-16 18:17:03 +00:00
Thomas Moestl
e8e2c56650 Revamp the busdma implementation a bit:
- change the IOMMU support code so that it supports overcommittting the
  available DVMA memory, while still allocating as lazily as possible.
  This is achieved by limiting the preallocation, and deferring the
  allocation to map load time when it fails. In the latter case, the
  DVMA memory reserved for unloaded maps can be stolen to free up enough
  memory for loading a map.
- allow NULL settings in the method tables, and search the parent tags
  until an appropriate implementation is found. This allows to remove some
  kluges in the old implementation.
2002-03-24 02:50:53 +00:00
Thomas Moestl
633541ac6e Add support for the SBus, which is used in early Sun UltraSPARC machines.
Ported from NetBSD.
2002-02-13 16:11:36 +00:00